Correction: Kalvala et al. Cannabidiol-Loaded Extracellular Vesicles from Human Umbilical Cord Mesenchymal Stem Cells Alleviate Paclitaxel-Induced Peripheral Neuropathy. Pharmaceutics 2023, 15, 554.

"Yan Li" was not included as an author in the original publication [...].

Cannabidiol-Loaded Extracellular Vesicles from Human Umbilical Cord Mesenchymal Stem Cells Alleviate Paclitaxel-Induced Peripheral Neuropathy.

In cancer patients, chronic paclitaxel (PTX) treatment causes excruciating pain, limiting its use in cancer chemotherapy. The neuroprotective potential of synthetic cannabidiol (CBD) and CBD formulated in extracellular vesicles (CBD-EVs) isolated from human umbilical cord derived mesenchymal stem cells was investigated in C57BL/6J mice with PTX-induced neuropathic pain (PIPN). The particle size of EVs and CBD-EVs, surface roughness, nanomechanical properties, stability, and release studies were all investigated. To develop neuropathy in mice, PTX (8 mg/kg, i.p.) was administered every other day (four doses). In terms of decreasing mechanical and thermal hypersensitivity, CBD-EVs treatment was superior to EVs treatment or CBD treatment alone (p < 0.001). CBD and CBD-EVs significantly reduced mitochondrial dysfunction in dorsal root ganglions and spinal homogenates of PTX-treated animals by modulating the AMPK pathway (p < 0.001). Studies inhibiting the AMPK and 5HT1A receptors found that CBD did not influence the neurobehavioral or mitochondrial function of PIPN. Based on these results, we hypothesize that CBD and CBD-EVs mitigated PIPN by modulating AMPK and mitochondrial function.

Anticancer and chemosensitization effects of cannabidiol in 2D and 3D cultures of TNBC: involvement of GADD45α, integrin-α5, -ß5, -ß1, and autophagy.

To date, promising therapy for triple negative breast cancer (TNBC) remains a serious concern clinically because of poor prognosis, resistance, and recurrence. Herein, anti-cancer potential of synthetic cannabidiol (CBD; Purisys, GA; GMP grade) was explored either alone or as a chemosensitizer followed by post-treatment with doxorubicin (DOX) in TNBC (i.e., MDA-MB-231 and MDA-MB-468) cells. In comparison to 2D cultures, CBD showed greater IC50 values in 3D (LDP2 hydrogel based) cultures of MDA-MB-231 (6.26-fold higher) and MDA-MB-468 (10.22-fold higher) cells. Next-generation RNA sequencing revealed GADD45A, GADD45G, FASN, LOX, and integrin (i.e., -α5, -ß5) genes to be novelly altered by CBD in MDA-MB-231 cells. CIM-16 plate-based migration assay and western blotting disclosed that CBD induces anti-migratory effects in TNBC cells by decreasing fibronectin, vimentin, and integrins-α5, -ß5, and -ß1. Western blotting, RT-qPCR, and immunocytochemistry revealed that CBD inhibited autophagy (decreased Beclin1, and ATG-5, -7, and -16) of TNBC cells. CBD pre-treatment increased DOX sensitivity in TNBC cells. CBD pre-treatment accompanied by DOX treatment decreased LOX and integrin-α5, and increased caspase 9 protein respectively in MDA-MB-468 cells.

Telmisartan Facilitates the Anticancer Effects of CARP-1 Functional Mimetic and Sorafenib in Rociletinib Resistant Non-small Cell Lung Cancer.

BACKGROUND/AIM: Tyrosine kinase inhibitors (TKIs) are used for the treatment of both wild type and mutant non-small cell lung cancer (NSCLC); however, acquired resistance is a major clinical challenge. Herein, we aimed to investigate the effects of telmisartan (Tel), CFM 4.16 and sorafenib combination in rociletinib resistant NSCLC tumors. MATERIALS AND METHODS: 3D spheroid cultures and western blotting were used for evaluating cytotoxic effects and protein expression. An in vivo rociletinib resistant H1975 xenograft model of NSCLC was developed by subcutaneous injection of rociletinib resistant H1975 cells into nude mice. RESULTS: Tel, CFM 4.16 and sorafenib combination displayed superior anti-cancer effects in 3D spheroid cultures and a rociletinib resistant H1975 xenograft model of NSCLC by decreasing the protein expression of oncogenic and cancer stem cell markers (Nanog, Sox2 and Oct4). CONCLUSION: Tel facilitates effective penetration of CFM 4.16 and sorafenib in rociletinib resistant H1975 models of NSCLC.

Role of Exosomes for Delivery of Chemotherapeutic Drugs.

Exosomes are endogenous extracellular vesicles (30-100 nm) composed with membrane lipid bilayer which carry vesicular proteins, enzymes, mRNA, miRNA and nucleic acids. They act as messengers for intra- and inter-cellular communication. In addition to their physiological roles, exosomes have the potential to encapsulate and deliver small chemotherapeutic drugs and biological molecules such as proteins and nucleic acid-based drugs to the recipient tissue or organs. Due to their biological properties, exosomes have better organotropism, homing capacity, cellular uptake and cargo release ability than other synthetic nano-drug carriers such as liposomes, micelles and nanogels. The secretion of tumor-derived exosomes is increased in the hypoxic and acidic tumor microenvironment, which can be used as a target for nontoxic and nonimmunogenic drug delivery vehicles for various cancers. Moreover, exosomes have the potential to carry both hydrophilic and hydrophobic chemotherapeutic drugs, bypass RES effect and bypass BBB. Exosomes can be isolated from other types of EVs and cell debris based on their size, density and specific surface proteins through ultracentrifugation, density gradient separation, precipitation, immunoaffinity interaction and gel filtration. Drugs can be loaded into exosomes at the biogenesis stage or with the isolated exosomes by incubation, electroporation, extrusion or sonication methods. Finally, exosomal cargo vehicles can be characterized by ultrastructural microscopic analysis. In this review we intend to summarize the inception, structure and function of the exosomes, role of exosomes in immunological regulation and cancer, methods of isolation and characterization of exosomes and products under clinical trials. This review will provide an inclusive insight of exosomes in drug delivery.

Cannabidiol loaded extracellular vesicles sensitize triple-negative breast cancer to doxorubicin in both in-vitro and in vivo models.

Extracellular Vesicles (EVs) were isolated from human umbilical cord mesenchymal stem cells (hUCMSCs) and were further encapsulated with cannabidiol (CBD) through sonication method (CBD EVs). CBD EVs displayed an average particle size of 114.1 ± 1.02 nm, zeta potential of -30.26 ± 0.12 mV, entrapment efficiency of 92.3 ± 2.21% and stability for several months at 4 °C. CBD release from the EVs was observed as 50.74 ± 2.44% and 53.99 ± 1.4% at pH 6.8 and pH 7.4, respectively after 48 h. Our in-vitro studies demonstrated that CBD either alone or in EVs form significantly sensitized MDA-MB-231 cells to doxorubicin (DOX) (*P < 0.05). Flow cytometry and migration studies revealed that CBD EVs either alone or in combination with DOX induced G1 phase cell cycle arrest and decreased migration of MDA-MB-231 cells, respectively. CBD EVs and DOX combination significantly reduced tumor burden (***P < 0.001) in MDA-MB-231 xenograft tumor model. Western blotting and immunocytochemical analysis demonstrated that CBD EVs and DOX combination decreased the expression of proteins involved in inflammation, metastasis and increased the expression of proteins involved in apoptosis. CBD EVs and DOX combination will have profound clinical significance in not only decreasing the side effects but also increasing the therapeutic efficacy of DOX in TNBC.

Polysaccharide hydrogel based 3D printed tumor models for chemotherapeutic drug screening.

A series of stable and ready-to-use bioinks have been developed based on the xeno-free and tunable hydrogel (VitroGel) system. Cell laden scaffold fabrication with optimized polysaccharide-based inks demonstrated that Ink H4 and RGD modified Ink H4-RGD had excellent rheological properties. Both bioinks were printable with 25-40 kPa extrusion pressure, showed 90% cell viability, shear-thinning and rapid shear recovery properties making them feasible for extrusion bioprinting without UV curing or temperature adjustment. Ink H4-RGD showed printability between 20 and 37 °C and the scaffolds remained stable for 15 days at temperature of 37 °C. 3D printed non-small-cell lung cancer (NSCLC) patient derived xenograft cells (PDCs) showed rapid spheroid growth of size around 500 µm in diameter and tumor microenvironment formation within 7 days. IC50 values demonstrated higher resistance of 3D spheroids to docetaxel (DTX), doxorubicin (DOX) and erlotinib compared to 2D monolayers of NSCLC-PDX, wild type triple negative breast cancer (MDA-MB-231 WT) and lung adenocarcinoma (HCC-827) cells. Results of flow property, shape fidelity, scaffold stability and biocompatibility of H4-RGD suggest that this hydrogel could be considered for 3D cell bioprinting and also for in-vitro tumor microenvironment development for high throughput screening of various anti-cancer drugs.

Cytotoxic and chemosensitizing effects of glycoalkaloidic extract on 2D and 3D models using RT4 and patient derived xenografts bladder cancer cells.

Glycoalkaloids have been widely demonstrated as potential anticancer agents. However, the chemosensitizing effect of these compounds with traditional chemotherapeutic agents has not been explored yet. In a quest for novel effective therapies to treat bladder cancer (BC), we evaluated the chemosensitizing potential of glycoalkaloidic extract (GE) with cisplatin (cDDP) in RT4 and PDX cells using 2D and 3D cell culture models. Additionally, we also investigated the underlying molecular mechanism behind this effect in RT4 cells. Herein, we observed that PDX cells were highly resistant to cisplatin when compared to RT4 cells. IC50 values showed at least 2.16-folds and 1.4-folds higher in 3D cultures when compared to 2D monolayers in RT4 cells and PDX cells, respectively. GE + cDDP inhibited colony formation (40%) and migration (28.38%) and induced apoptosis (57%) in RT4 cells. Combination therapy induced apoptosis by down-regulating the expression of Bcl-2 (p < 0.001), Bcl-xL (p < 0.001) and survivin (p < 0.01), and activating the caspase cascade in RT4 cells. Moreover, decreased expression of MMP-2 and 9 (p < 0.01) were observed with combination therapy, implying its effect on cell invasion/migration. Furthermore, we used 3D bioprinting to grow RT4 spheroids using sodium alginate-gelatin as a bioink and evaluated the effect of GE + cDDP on this system. Cell viability assay showed the chemosensitizing effect of GE with cDDP on bio-printed spheroids. In summary, we showed the cytotoxicity effect of GE on BC cells and also demonstrated that GE could sensitize BC cells to chemotherapy.

Targeting lung cancer stem cells using combination of Tel and Docetaxel liposomes in 3D cultures and tumor xenografts.

Cancer stem cells (CSCs) accounts for recurrence and resistance to chemotherapy in various tumors. Efficacy of chemotherapeutic drugs is limited by tumor stromal barriers, which hinder their penetration into deep tumor sites. We have earlier shown telmisartan (Tel) pretreatment prior to Docetaxel (DTX) administration enhances anti-cancer effects in non-small cell lung cancer (NSCLC). Herein, we demonstrated for the first time the efficacy of Docetaxel liposomes (DTXPL) in combination with Tel in 3D cultures of H460 cells by using polysaccharide-based hydrogels (TheWell Biosciences) and also in xenograft model of DTX resistant H460 derived CD133+ lung tumors. DTXPL and Tel combination showed enhanced cytotoxicity in H460 WT 3D cultures by two folds. In H460 3D cultures, Tel pretreatment showed increased liposomal uptake. DTXPL and Tel combination treated tumors showed reduction in tumor volume (p < .001), increased apoptosis and downregulation of CSC markers (p < .01) in H460 WT and DTX resistant CD133+ xenograft models.

High-throughput 3D bioprinting of corneal stromal equivalents.

In this study we designed high-throughput 3D bioprinting of corneal equivalents which may address the need for in vitro models. In our digital 3D cornea model, average dimensions of adult cornea were converted to 3D shapes, then to G-code files which were printed by BIOX printer (CELLINK). To maintain the curvature of cornea, a support scaffold was designed using stereolithographic printer. The support scaffold could facilitate the printing of 6-12 corneas at a time thus enabling high-throughput printing. Human corneal keratocytes (HCKs) were incorporated in the optimized bio-ink, and cell-laden corneal stromal equivalents were printed. Printed structures were cross-linked by calcium chloride 100 mM, washed with Hanks' Balanced Salt Solution and incubated at 37°C in fibroblast media. Printed corneas were analyzed for live dead assay, Alamar assay, and expression of fibronectin and actin green markers. Printed corneas were able to maintain their structure, integrity, and clarity. Live dead assay and Alamar assay demonstrated that HCKs maintained high viability (>95%) for 2 weeks. HCKs in the printed corneas showed expression for fibronectin and actin green. In conclusion, high-throughput fabrication of 3D printed corneal stromal equivalents using a combination of stereolithography printing, extrusion based printing, and micro-transfer molding techniques was achieved.

Author Correction: Characterization and printability of Sodium alginate -Gelatin hydrogel for bioprinting NSCLC co-culture.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Characterization and printability of Sodium alginate -Gelatin hydrogel for bioprinting NSCLC co-culture.

3D bioprinting improves orientation of in vitro tumor models by offering layer by layer positioning of cancer cells and cancer associated fibroblasts (CAFs) which can replicate tumor microenvironment. Aim of this study was to develop a sodium alginate -gelatin (SA-GL) hydrogel by optimizing rheological parameters to print non-small cell lung cancer (NSCLC) patient derived xenograft (PDX) cells and lung CAFs co-cultures. SA-GL hydrogels were prepared, and rheological properties were evaluated. Both the cells were mixed with the hydrogel and printed using INKREDIBLE bioprinter. Hydrogels prepared with 3.25% and 3.5% (w/v) SA and 4% (w/v) GL showed higher printability and cell viability. A significant decline in viscosity with shear rate was observed in these hydrogels suggesting the shear thinning property of hydrogels. Spheroid size distribution after 15 days was in the diameter range of 50-1100 µm. Up-regulation of vimentin, α-SMA and loss of E-cadherin in co-culture spheroids confirmed cellular crosstalk. This study demonstrates that rheological optimization of SA-GL hydrogel enhances printability and viability of NSCLC PDX and CAF co-culture which allows 3D co-culture spheroid formation within the printed scaffold. Therefore, this model can be used for studying high throughput drug screening and other pre-clinical applications.

Combination of UVB Absorbing Titanium Dioxide and Quercetin Nanogel for Skin Cancer Chemoprevention.

Sunscreens are widely prescribed and used to prevent skin cancer; however, they have been reported to contain various chemicals which mimic hormones and disrupt hormonal functioning in humans. The aim of this study was to develop topical nanogel for skin cancer prevention using an antioxidant compound quercetin (Qu) and inorganic titanium dioxide (TiO2). Two formulations of Qu nanocrystals were optimized with low and high concentration of drug using the Box-Behnken design with the quadratic response surface model and further homogenized with TiO2. Qu nanocrystal (0.08% and 0.12%) formulations showed a particle size of 249.65 ± 2.84 nm and 352.48 ± 3.56 nm with zeta potential of - 14.7 ± 0.41 mV and - 19.6 ± 0.37 mV and drug content of 89.27 ± 1.39% and 90.38 ± 1.81% respectively. Scanning electron microscopy (SEM) images showed rod-shaped nanocrystals with a particle size below 400 nm. Qu (0.08%), Qu (0.12%), Qu (0.12%) + TiO2 (5%), and Qu (0.12%) + TiO2 (15%) nanogels showed over 70% drug release with significantly (p < 0.001) enhanced skin deposition of Qu as compare with Qu suspension within 24 h. The average numbers of tumor, tumor volume, and percentage of animals with tumors at onset in the Qu (0.12%) + TiO2 (15%) nanogel-pretreated group was found to be significantly (p < 0.05) less as compared with the UV only exposed group. Further, Qu (0.12%) + TiO2 (15%) nanogel significantly (p < 0.001) downregulated COX-2, EP3, EP4, PCNA, and cyclin D1 expressions in contrast to Qu and TiO2 only pretreated groups. Therefore, novel combination of Qu (0.12%) + TiO2 (15%) with enhanced skin deposition can be used as a chemopreventive strategy in UVB-induced skin photocarcinogenesis.