Therapeutic efficacy of 166Holmium siloxane in microbrachytherapy of induced glioblastoma in minipig tumor model.

Glioblastoma is considered the most common malignant primary tumor of central nervous system. In spite of the current standard and multimodal treatment, the prognosis of glioblastoma is poor. For this reason, new therapeutic approaches need to be developed to improve the survival time of the glioblastoma patient. In this study, we performed a preclinical experiment to evaluate therapeutic efficacy of 166Ho microparticle suspension administered by microbrachytherapy on a minipig glioblastoma model. Twelve minipigs were divided in 3 groups. Minipigs had injections into the tumor, containing microparticle suspensions of either 166Ho (group 1; n = 6) or 165Ho (group 2; n = 3) and control group (group 3; n = 3). The survival time from treatment to euthanasia was 66 days with a good state of health of all minipigs in group 1. The median survival time from treatment to tumor related death were 8.6 and 7.3 days in groups 2 and control, respectively. Statistically, the prolonged life of group 1 was significantly different from the two other groups (p < 0.01), and no significant difference was observed between group 2 and control (p=0.09). Our trial on the therapeutic effect of the 166Ho microparticle demonstrated an excellent efficacy in tumor control. The histological and immunohistochemical analysis showed that the efficacy was related to a severe 166Ho induced necrosis combined with an immune response due to the presence of the radioactive microparticles inside the tumors. The absence of reflux following the injections confirms the safety of the injection device.

Feasibility of intratumoral 165Holmium siloxane delivery to induced U87 glioblastoma in a large animal model, the Yucatan minipig.

Glioblastoma is the most aggressive primary brain tumor leading to death in most of patients. It comprises almost 50-55% of all gliomas with an incidence rate of 2-3 per 100,000. Despite its rarity, overall mortality of glioblastoma is comparable to the most frequent tumors. The current standard treatment combines surgical resection, radiotherapy and chemotherapy with temozolomide. In spite of this aggressive multimodality protocol, prognosis of glioblastoma is poor and the median survival remains about 12-14.5 months. In this regard, new therapeutic approaches should be developed to improve the life quality and survival time of the patient after the initial diagnosis. Before switching to clinical trials in humans, all innovative therapeutic methods must be studied first on a relevant animal model in preclinical settings. In this regard, we validated the feasibility of intratumoral delivery of a holmium (Ho) microparticle suspension to an induced U87 glioblastoma model. Among the different radioactive beta emitters, 166Ho emits high-energy ß(-) radiation and low-energy γ radiation. ß(-) radiation is an effective means for tumor destruction and γ rays are well suited for imaging (SPECT) and consequent dosimetry. In addition, the paramagnetic Ho nucleus is a good asset to perform MRI imaging. In this study, five minipigs, implanted with our glioblastoma model were used to test the injectability of 165Ho (stable) using a bespoke injector and needle. The suspension was produced in the form of Ho microparticles and injected inside the tumor by a technique known as microbrachytherapy using a stereotactic system. At the end of this trial, it was found that the 165Ho suspension can be injected successfully inside the tumor with absence or minimal traces of Ho reflux after the injections. This injection technique and the use of the 165Ho suspension needs to be further assessed with radioactive 166Ho in future studies.

Acoustic Mode Hybridization in a Single Dimer of Gold Nanoparticles.

The acoustic vibrations of single monomers and dimers of gold nanoparticles were investigated by measuring for the first time their ultralow-frequency micro-Raman scattering. This experiment provides access not only to the frequency of the detected vibrational modes but also to their damping rate, which is obscured by inhomogeneous effects in measurements on ensembles of nano-objects. This allows a detailed analysis of the mechanical coupling occurring between two close nanoparticles (mediated by the polymer surrounding them) in the dimer case. Such coupling induces the hybridization of the vibrational modes of each nanoparticle, leading to the appearance in the Raman spectra of two ultralow-frequency modes corresponding to the out-of-phase longitudinal and transverse (with respect to the dimer axis) quasi-translations of the nanoparticles. Additionally, it is also shown to shift the frequency of the quadrupolar modes of the nanoparticles. Experimental results are interpreted using finite-element simulations, which enable the unambiguous identification of the detected modes and despite the simplifications made lead to a reasonable reproduction of their measured frequencies and quality factors. The demonstrated feasibility of low-frequency Raman scattering experiments on single nano-objects opens up new possibilities to improve the understanding of nanoscale vibrations with this technique being complementary with single nano-object time-resolved spectroscopy as it gives access to different vibrational modes.

Environmental effects on the natural vibrations of nanoplatelets: a high pressure study.

Resonant acoustic modes from ultrathin CdS colloidal nanoplatelets (NPLs) are probed under high pressure using low frequency Raman spectroscopy. In particular we focus on the characterization of the recently evidenced mass load effect that is responsible for a significant downshift of the NPL breathing frequency due to the inert mass of organic ligands. We show that a key parameter in the observation of the mass effect is whether the surrounding medium is able to support THz acoustic wave propagation, at a frequency close to that of the inorganic vibrating core. At low pressures, surface organic molecules show a single particle-like behavior and a strong mass effect is observed. Upon pressure loading the ligands are compacted together with the surrounding medium and slowly turned into a solid medium that supports THz acoustic phonons. We observe a continuous transition towards a fully embedded NPL with a frequency close to that of a freely vibrating slab and a progressive loss of the mass effect. The quality factor of the detected vibration significantly decreases as a result of the appearance of a "phonon-like" behavior of the environment at the origin of damping and energy dissipation.

The mass load effect on the resonant acoustic frequencies of colloidal semiconductor nanoplatelets.

Resonant acoustic modes of ultrathin CdS and CdSe colloidal nanoplatelets (NPLs) with varying thicknesses were probed using low frequency Raman scattering. The spectra are dominated by an intense band ascribed to the thickness breathing mode of the 2D nanostructures. The measured Raman frequencies show strong deviations with respect to the values expected for simple bare plates, all the more so as the thickness is reduced. The deviation is shown to arise from the additional mass of the organic ligands that are bound to the free surfaces of the nanoplatelets. The calculated eigen frequencies of vibrating platelets weighed down by the mass of the organic ligands are in very good agreement with the observed experimental behaviours. This finding opens up a new possibility of nanomechanical sensing such as nanobalances.

Gadolinium-Based Nanoparticles and Radiation Therapy for Multiple Brain Melanoma Metastases: Proof of Concept before Phase I Trial.

Nanoparticles containing high-Z elements are known to boost the efficacy of radiation therapy. Gadolinium (Gd) is particularly attractive because this element is also a positive contrast agent for MRI, which allows for the simultaneous use of imaging to guide the irradiation and to delineate the tumor. In this study, we used the Gd-based nanoparticles, AGuIX®. After intravenous injection into animals bearing B16F10 tumors, some nanoparticles remained inside the tumor cells for more than 24 hours, indicating that a single administration of nanoparticles might be sufficient for several irradiations. Combining AGuIX® with radiation therapy increases tumor cell death, and improves the life spans of animals bearing multiple brain melanoma metastases. These results provide preclinical proof-of-concept for a phase I clinical trial.

Influence of the number of nanoparticles on the enhancement properties of surface-enhanced Raman scattering active area: sensitivity versus repeatability.

In the present work, the combination of chemical immobilization with electron beam lithography enables the production of sensitive and reproducible SERS-active areas composed of stochastic arrangements of gold nanoparticles. The number of nanoparticles was varied from 2 to 500. Thereby a systematic analysis of these SERS-active areas allows us to study SERS efficiency as a function of the number of nanoparticles. We found that the experimental parameters are critical, in particular the size of the SERS-active area must be comparable to the effective area of excitation to obtained reproducible SERS measurements. The sensitivity has also been studied by deducing the number of NPs that generate the enhancement. With this approach we demonstrates that the maximum enhancement, the best sensitivity, is obtained with the smallest number of nanoparticles that is resonant at a given excitation wavelength.

Design and Optical Properties of Active Polymer-Coated Plasmonic Nanostructures.

The grafting of stimuli-responsive polymer brushes on plasmonic structures provides a perfectly controlled two-dimensional active device with optical properties that can be modified through external stimuli. Herein, we demonstrate thermally induced modifications of the plasmonic response of lithographic gold nanoparticles functionalized by thermosensitive polymer brushes of (poly(N-isopropylacrylamide), PNIPAM). Optical modifications result from refractive local index changes due to a phase transition from a hydrophilic state (swollen regime) to a hydrophobic state (collapsed regime) of the polymer chains occurring in a very small range of temperatures. The refractive index of the polymer in aqueous solution is estimated in both states, deduced from the discrete dipole approximation (DDA) method. The combination of lithographic gold NPs and thermoresponsive polymer chains leads to a new generation of perfectly calibrated and dynamically controlled hybrid gold/polymer system for real-time nanosensors.

Thermo-induced electromagnetic coupling in gold/polymer hybrid plasmonic structures probed by surface-enhanced raman scattering.

This paper describes a general stepwise strategy combining diazonium salt, surface-initiated atom transfer radical polymerization (SI-ATRP), and click chemistry for an efficient gold surface functionalization by poly(N-isopropylacrylamide) (PNIPAM) brushes and gold nanoparticle assemblies. We designed by this way a new plasmonic device made of gold nanoparticles separated from a gold film through a thermoresponsive polymer layer. This organic layer responds to temperature variations by conformational changes (with a characteristic temperature called the lower critical solution temperature, LCST) and is therefore able to vary the distance between the gold nanoparticles and the gold film. The optical properties of these stimulable substrates were probed by surface-enhanced raman scattering (SERS) using methylene blue (MB) as a molecular probe. We show that an increase of the external temperature reversibly induces a significant enhancement of the MB SERS signal. This was attributed to a stronger interaction between the gold nanoparticles and the gold substrate. The temperature-responsive plasmonic devices developed in this paper thus provide a dynamic SERS platform, with thermally switchable electromagnetic coupling between the gold nanoparticles and the gold surface.

A general approach combining diazonium salts and click chemistries for gold surface functionalization by nanoparticle assemblies.

This paper describes a general stepwise strategy combining diazonium salt and click chemistries for an efficient gold surface functionalization by gold nanoparticles. The procedure first involves the strong covalent bonding to gold electrodes of OH-terminated aryl layers derived from the electroreduction of the parent diazonium salts. The following step consists in transforming the OH end-groups to azides in order to obtain "clickable"-active gold surfaces, which could further be used as versatile platforms for the subsequent grafting of acetylene-bearing molecules. The practical interest of the gold surfaces functionalized by this stepwise strategy was evidenced through the self-assembly of surface-enhanced Raman scattering (SERS)-active gold nanoparticles. SERS activity was shown to be amplified by the presence of a very strong local electric field confinement between the particles and the gold surface.