The thermoelectric properties of CdBr, CdI, and Janus Cd2BrI monolayers with low lattice thermal conductivity.

The investigation and development of high thermoelectric value materials has become a research hotspot in recent years. In this work, based on the density functional theory on the Perdew-Burke-Ernzerhof (GGA-PBE) level, the thermoelectric properties of transition metal halides CdBr, Janus Cd2BrI, and CdI monolayers have been systematically investigated using Boltzmann transport theory. The calculation of the electronic band structure shows that these three materials have indirect band gap semiconductor properties. For carrier transport, the electron mobilities for CdBr, Janus Cd2BrI, and CdI monolayers are found to be 74, 16, 21 cm2 s-1 V-1 for p-type doping and 116, 102, 78 cm2 s-1 V-1 for n-type doping. Regarding their phonon transport, the CdBr, Cd2BrI, and CdI monolayers all have very low lattice thermal conductivity (4.78, 2.46, and 1.65 W m-1 K-1, respectively) that decreases with increasing temperature, which is favorable for obtaining large zT values. The electrical transport results show that the performance of p-type doping is better than that of n-type doping. At 300 K, the Seebeck coefficients of p-type doping for the CdBr, Cd2BrI, and CdI monolayers are 217.72, 246.43, and 226.24 µV K-1, respectively. In addition, we predict that the zT values of the CdBr, Cd2BrI, and CdI monolayers are 0.62, 1.64, and 0.87 for p-type doping at 300 K respectively. The zT values increase with the increase of temperature. In particular, the Janus Cd2BrI monolayer has a zT value of 3.03 at 600 K. These results suggest that all these materials can be good candidates for thermoelectric materials.

Electronic structure and magnetothermal properties of two-dimensional ScCl.

Two-dimensional ferromagnetic materials with intrinsic half-metallic properties have strong application advantages in nanoscale spintronics. Herein, density functional theory calculations show that monolayer ScCl is a ferromagnetic metallic material when undoped (n = 0), and the transition from metal to half-metal occurs with the continuous doping of holes. On the contrary, as the concentration of doped electrons increases, the system will exhibit metallic characteristics, which is particularly evident from a variation in spin polarizability. Furthermore, we have discussed how doped carriers affect the shape of the Fermi surface and the Fermi velocity of electrons. Most importantly, Monte Carlo simulations show that the ScCl monolayer is particularly regulated by carrier concentration (n) and magnetic field (h). Additionally, trends in energy and magnetic exchange coupling in different magnetic configurations (AFM phase and FM phase) with different doping concentrations are presented. When n < -0.16, the material is not only a half-metallic material that easily flips the magnetic axis, but also proves to be a candidate ferromagnetic material that works stably at room temperature in terms of dynamic stability. In addition, the origin of magnetocrystalline anisotropy is analyzed, and the contribution of different orbitals to spin-orbit coupling is presented. Moreover, we note that when magnetic field is small (h < 1 T), the change in size has a significant effect on ferromagnetic phase transition. However, when the system size is large (size >15 nm), TC is less sensitive to magnetic field. In addition, hole doping and size effect will greatly affect the hC of the system, but when the hole doping exceeds the critical value (n = -0.16), its influence on the hysteresis loop is no longer obvious. These interesting magnetic phenomena and easily adjustable physical properties show us that monolayer ScCl will be a promising functional material.

Equibiaxial strain regulates the electronic structure and mechanical, piezoelectric, and thermal transport properties of the 2H-phase monolayers CrX2 (X = S, Se, Te).

A superior piezoelectric coefficient and diminutive lattice thermal conductivity are advantageous for the application of a two-dimensional semiconductor in piezoelectric and thermoelectric devices, whereas an imperfect piezoelectric coefficient and large lattice thermal conductivity limit the practical application of the material. In this study, we investigate how the equibiaxial strain regulates the electronic structure, and mechanical, piezoelectric, and thermal transport properties. Tensile strain can deduce the bandgap of the monolayer CrX2 (X = S, Se, Te), whereas compressive strain has an opposite effect. Additionally, the transition from a semiconductor to a metal state and the transition between direct and indirect band gaps will occur at appropriate strain values, so the electronic structure can be effectively regulated. The reason is the different sensitivities of the energy corresponding to K and Γ on the valence band to the strain due to the changes in different orbital overlaps. The tensile strain can effectively improve the flexibility of monolayers CrX2, which provides a possibility for the application of flexible electronic devices. Furthermore, the tensile strain can improve the piezoelectric strain coefficient of monolayers CrX2. Using Slacks formulation, we calculate the lattice thermal conductivity, and the tensile biaxial strain can reduce the lattice thermal conductivity. Our research provides a strategy to enhance the piezoelectric and flexible electronic applications and decrease the lattice thermal conductivity, which can benefit the thermoelectric applications.

The coexistence of high piezoelectricity and superior optical absorption in Janus Bi2X2Y (X = Te, Se; Y = Te, Se, S) monolayers.

Bismuth chalcogenide and its derivatives have been attracting attention in various fields as semiconductors or topological insulators. Inspired by the high piezoelectric properties of Janus Bi2TeSeS monolayer and the excellent optical absorption properties of the Bi2X3 (X = Te, Se, S) monolayers, we theoretically predicted four new-type two-dimensional (2D) monolayers Janus Bi2X2Y (X = Te, Se; Y = Te, Se, S) using the first principles combined with density functional theory (DFT). The thermal, dynamic, and mechanical stabilities of Janus Bi2X2Y monolayers were confirmed based on ab initio molecular dynamics (AIMD) simulations, phonon dispersion, and elastic constants calculations. Their elastic properties, band structures, piezoelectric, and optical properties were systematically investigated. It was found that Janus Bi2X2Y monolayers have a typical Mexican hat-shaped valence band edge structure and, therefore, have a ring-shaped flat band edge, which results in their indirect band gaps. The results show that Janus Bi2X2Y monolayers are semiconductors with moderate band gaps (0.62-0.98 eV at the HSE + SOC level). After considering the electron-phonon renormalization (EPR), the band gaps are reduced by less than 5% at 0 K under the zero-point renormalization (ZPR) and further reduced by approximately 10% at 300 K. Besides, Janus Bi2X2Y monolayers also exhibit excellent optical absorption properties in the blue-UV light region, with the peak values at the order of 8 × 105 cm-1. Particularly, the Janus Bi2Te2S monolayer was found to exhibit a piezoelectric strain coefficient d11 of up to 20.30 pm V-1, which is higher than that of most of the 2D materials. Our results indicate that Janus Bi2X2Y monolayers could be promising candidates in solar cells, optical absorption, and optoelectronic devices; especially, a Janus Bi2Te2S monolayer can also be an excellent piezoelectric material with great prospects in the fields of mechanical and electrical energy conversion.

Janus 2H-MXTe (M = Zr, Hf; X = S, Se) monolayers with outstanding thermoelectric properties and low lattice thermal conductivities.

Two-dimensional (2D) materials have been one of the most popular objects in the research field of thermoelectric (TE) materials and have attracted substantial attention in recent years. Inspired by the synthesized 2H-MoSSe and numerous theoretical studies, we systematically investigated the electronic, thermal, and TE properties of Janus 2H-MXTe (M = Zr and Hf; X = S and Se) monolayers by using first-principles calculations. The phonon dispersion curves and AIMD simulations confirm the thermodynamic stabilities. Moreover, Janus 2H-MXTe were evaluated as indirect band-gap semiconductors with band gaps ranging from 0.56 to 0.90 eV using the HSE06 + SOC method. To evaluate the TE performance, firstly, we calculated the temperature-dependent carrier relaxation time with acoustic phonon scattering τac, impurity scattering τimp, and polarized scattering τpol. Secondly, the calculation of lattice thermal conductivity (κl) shows that these monolayers possess relatively poor κl with values of 3.4-5.4 W mK-1 at 300 K, which is caused by the low phonon lifetime and group velocity. After computing the electronic transport properties, we found that the n-type doped Janus 2H-MXTe monolayers exhibit a high Seebeck coefficient exceeding 200 µV K-1 at 300 K, resulting in a high TE power factor. Eventually, combining the electrical and thermal conductivities, the optimal dimensionless figure of merit (zT) at 300 K (900 K) can be obtained, which is 0.94 (3.63), 0.51 (2.57), 0.64 (2.72), and 0.50 (1.98) for n-type doping of ZrSeTe, HfSeTe, ZeSTe, and HfSTe monolayers. Particularly, the ZrSeTe monolayer shows the best TE performance with the maximal zT value. These results indicate the excellent application potential of Janus 2H-MXTe (M = Zr and Hf; X = S and Se) monolayers in TE materials.

Two-dimensional Janus pentagonal MSeTe (M = Ni, Pd, Pt): promising water-splitting photocatalysts and optoelectronic materials.

Inspired by the interesting and novel properties exhibited by Janus transition metal dichalcogenides (TMDs) and two-dimensional pentagonal structures, we here investigated the structural stability, mechanical, electronic, photocatalytic, and optical properties for a class of two-dimensional (2D) pentagonal Janus TMDs, namely penta-MSeTe (M = Ni, Pd, Pt) monolayers, by using density functional theory (DFT) combined with Hubbard's correction (U). Our results showed that these monolayers exhibit good structural stability, appropriate band structures for photocatalysts, high visible light absorption, and good photocatalytic applicability. The calculated electronic properties reveal that the penta-MSeTe are semiconductors with a bandgap range of 2.06-2.39 eV, and their band edge positions meet the requirements for water-splitting photocatalysts in various environments (pH = 0-13). We used stress engineering to seek higher solar-to-hydrogen (STH) efficiency in acidic (pH = 0), neutral (pH = 7) and alkaline (pH = 13) environments for penta-MSeTe from 0% to +8% biaxial and uniaxial strains. Our results showed that penta-PdSeTe stretched 8% along the y direction and demonstrates an STH efficiency of up to 29.71% when pH = 0, which breaks the theoretical limit of the conventional photocatalytic model. We also calculated the optical properties and found that they exhibit high absorption (13.11%) in the visible light range and possess a diverse range of hyperbolic regions. Hence, it is anticipated that penta-MSeTe materials hold great promise for applications in photocatalytic water splitting and optoelectronic devices.

Hexagonal warping effect in the Janus group-VIA binary monolayers with large Rashba spin splitting and piezoelectricity.

In this paper, the electronic band structure, Rashba effect, hexagonal warping, and piezoelectricity of Janus group-VIA binary monolayers STe2, SeTe2, and Se2Te are investigated based on density functional theory (DFT). Due to the inversion asymmetry and spin-orbit coupling (SOC), the STe2, SeTe2 and Se2Te monolayers exhibit large intrinsic Rashba spin splitting (RSS) at the Γ point with the Rashba parameters 0.19 eV Å, 0.39 eV Å, and 0.34 eV Å, respectively. Interestingly, based on the k·p model via symmetry analysis, the hexagonal warping effect and a nonzero spin projection component Sz arise at a larger constant energy surface due to nonlinear k3 terms. Then, the warping strength λ was obtained by fitting the calculated energy band data. Additionally, in-plane biaxial strain can significantly modulate the band structure and RSS. Furthermore, all these systems exhibit large in-plane and out-of-plane piezoelectricity due to inversion and mirror asymmetry. The calculated piezoelectric coefficients d11 and d31 are about 15-40 pm V-1 and 0.2-0.4 pm V-1, respectively, which are superior to those of most reported Janus monolayers. Because of the large RSS and piezoelectricity, the studied materials have great potential for spintronic and piezoelectric applications.

Ferromagnetic vanadium disulfide VS2 monolayers with high Curie temperature and high spin polarization.

The structural, electronic, and magnetic properties of vanadium disulfide VS2 monolayers were investigated using first-principles calculations and Monte Carlo (MC) simulations. The results of molecular dynamics simulations and phonon dispersion showed that the VS2 monolayer has good dynamic and thermodynamic stabilities. Based on the results of the band structure, we also explore the effect of carrier concentrations on the spin gap, spin polarization and the direction of the easy magnetic axis. Our results demonstrated that doping an appropriate amount of holes can cause the reversal of the easy magnetic axis and maintain nearly 100% spin polarization, which greatly improves the application possibility of the VS2 monolayer as a spintronic device. The contribution of different orbits to the spin-orbit coupling (SOC) effect is given in magnetocrystalline anisotropy energy, which provides a theoretical basis for explaining the origin of magnetic crystal anisotropy. Based on the MC simulations, we also showed the influences of different parameters (carrier concentrations, magnetic field and crystal field) on the magnetothermal properties of the VS2 monolayer. It is found that the increase of hole doping concentrations can promote the increase of the Curie temperature, while the increase of electron doping concentrations will greatly weaken the Curie temperature. Furthermore, according to the influences of different parameters on the Curie temperature and spin polarization, we conclude that a suitably enhanced magnetic field and appropriate hole concentrations will not only make the system maintain high spin polarization, but also make the system exhibit ferromagnetic properties above room temperature.

A first-principles study on the electronic, piezoelectric, and optical properties and strain-dependent carrier mobility of Janus TiXY (X ≠ Y, X/Y = Cl, Br, I) monolayers.

Janus transition metal dichalcogenide monolayers (TMDs) have attracted wide attention due to their unique physical and chemical properties since the successful synthesis of the MoSSe monolayer. However, the related studies of Janus monolayers of transition metal halides (TMHs) with similar structures have rarely been reported. In this article, we systematically investigate the electronic properties, piezoelectric properties, optical properties, and carrier mobility of new Janus TiXY (X ≠ Y, X/Y = Cl, Br, I) monolayers using first principles calculations for the first time. These Janus TiXY monolayers are thermally, dynamically, and mechanically stable, and their energy bands near the Fermi level (EF) are almost entirely contributed by the central Ti atom. Besides, the Janus TiXY monolayers exhibit excellent in-plane and out-of-plane piezoelectric effects, especially with an in-plane piezoelectric coefficient of ∼4.58 pm V-1 for the TiBrI monolayer and an out-of-plane piezoelectric coefficient of ∼1.63 pm V-1 for the TiClI monolayer, suggesting their promising applications in piezoelectric sensors and energy storage applications. The absorption spectra of Janus TiXY monolayers are mainly distributed in the visible and infrared regions, implying that they are fantastic candidates for photoelectric and photovoltaic applications. The obtained carrier mobilities revealed that TiXY monolayers are hole-type semiconductors. Under uniaxial compressive strain, the hole mobilities of these monolayers are gradually improved, indicating that TiXY monolayers have potential applications in the field of flexible electronic devices.

Electronic and transport properties of semimetal ZrBeSi crystal: a first-principles study.

In recent years, semimetals have aroused people's research interest. Here, we systematically study phonon and electronic transport properties of the ZrBeSi with semimetal character by using the first-principles calculations together with the Boltzmann transport theory. Calculated lattice thermal conductivities of the ZrBeSi alongaandcaxes are 31.3 W (m · K)-1and 56.0 W (m · K)-1at room temperature, respectively, which are larger than the most semiconductors and semimetals. By comparing with other semimetals, we find that the larger lattice thermal conductivity of ZrBeSi is due to its smaller Grüneisen parameter, which indicates the weaker phonon scattering. Main contributions to the lattice thermal conductivities alongaandcaxis come from the acoustic branches, and conversely, the contributions of optical branches are very small. In addition, we calculate the Seebeck coefficient and the electron thermal conductivity of ZrBeSi based on the relaxation time approximation. The electronic transport properties of ZrBeSi exhibit strong anisotropy in bothaandbdirections. Calculated electronic thermal conductivities of pristine ZrBeSi alongaandcaxes are 8.8 W (m · K)-1and 9.7 W (m · K)-1at room temperature, respectively. Furthermore, we also obtain the figure of meritZTon the basis of phonon and electron transport. The obtainedZTalongcaxis reaches a maximum of 0.11 at 900 K, demonstrating that ZrBeSi has a generalZT, but it has good heat conduction ability. Our research will help to understand the transport properties of semimetals and expand the application of semimetals to heat conduction devices. At the same time, it also provides some reference for the future experimental work.

Electronic and thermoelectric properties of semiconducting Bi2SSe2 and Bi2S2Se monolayers with high optical absorption.

Bismuth telluride (Bi2Te3) and its derivatives are often focused on as thermoelectric materials around room temperature. In this work, we theoretically predicted two new types of Bi2Te3-based two-dimensional materials Bi2SSe2 and Bi2S2Se using density functional theory (DFT) combined with Boltzmann transport theory. The thermal, dynamic, and mechanical stabilities of Bi2SSe2 and Bi2S2Se monolayers are confirmed using ab initio molecular dynamics (AIMD) simulations, phonon dispersion, and elastic constant calculations. The phonon transport properties, including lattice thermal conductivity, group velocity, Grüneisen parameter, converged scattering rate, and phonon lifetimes contributed by different branches, are systematically investigated. The electronic and thermoelectric properties, including carrier mobility (µ), Seebeck coefficient (S), electrical conductivity (σ), power factors, and figure of merit (zT) along the zigzag and armchair directions as a function of carrier concentration at different temperatures, are also investigated. It is found that the Bi2SSe2 and Bi2S2Se monolayers have moderate indirect band gaps (0.92 eV and 1.08 eV at the PBE level, respectively) and low lattice thermal conductivities (4.35 and 5.37 W m-1 K-1 at 300 K, respectively). The largest zT values of Bi2SSe2 and Bi2S2Se monolayers are 0.50 and 0.28 at 300 K and 1.39 and 0.93 at 700 K for p-doping types, respectively. The Bi2SSe2 and Bi2S2Se monolayers are predicted to show high optical absorption peaks at 8 × 105 cm-1 in the visible and near-UV light region, respectively. Our results indicate that both Bi2SSe2 and Bi2S2Se could be promising candidates in energy conversion, solar cells, and optoelectronic devices.

An ab initio study of two-dimensional anisotropic monolayers ScXY (X = S and Se; Y = Cl and Br) for photocatalytic water splitting applications with high carrier mobilities.

Recently, metal oxyhalides have been broadly studied due to their hierarchical structures and promising functionalities. Herein, a thorough study of newly modeled monolayers ScXY (X = S and Se; Y = Cl and Br), a class of derivates of ScOBr monolayers, was conducted using first-principles calculations. We theoretically confirm that these ScXY monolayers are mechanically, dynamically, and thermally stable. Young's modulus and Poisson's ratio calculated for all these ScXY monolayers obviously exhibit anisotropic properties. All these monolayers are indirect-gap semiconductors with bandgaps in the range of 2.35-3.18 eV, and their conduction band minimum (CBM) and valence band maximum (VBM) can straddle the reduction and oxidation potential of water very well, respectively. Particularly, ScSeCl and ScSeBr monolayers have the most propitious bandgaps and band alignments to be used as promising photocatalysts, and the predicted carrier mobility is much larger than that of many other two-dimensional materials. Moreover, the predicted anisotropic carrier mobilities and indirect bandgaps will diminish the recombination and facilitate the migration of photo-generated electron and hole pairs. Moreover, biaxial strain (-5% to 5%) effects on the band alignments and bandgaps are discussed. Our findings highlight that ScSeCl and ScSeBr monolayers are envisioned to act as promising photocatalytic and photoelectronic materials with anisotropic ultrahigh carrier mobilities.

Novel thermoelectric performance of 2D 1T- Se2Te and SeTe2with ultralow lattice thermal conductivity but high carrier mobility.

The design and search for efficient thermoelectric materials that can directly convert waste heat into electricity have been of great interest in recent years since they have practical applications in overcoming the challenges of global warming and the energy crisis. In this work, two new two-dimensional 1T-phase group-VI binary compounds Se2Te and SeTe2with outstanding thermoelectric performances are predicted using first-principles calculations combined with Boltzmann transport theory. The dynamic stability is confirmed based on phonon dispersion. It is found that the spin-orbit coupling effect has a significant impact on the band structure of SeTe2, and induces a transformation from indirect to direct band gap. The electronic and phononic transport properties of the Se2Te and SeTe2monolayer are calculated and discussed. High carrier mobility (up to 3744.321 and 2295.413 cm2V-1S-1for electron and hole, respectively) is exhibited, suggesting great applications in nanoelectronic devices. Furthermore, the maximum thermoelectric figure of meritzTof SeTe2for n-type and p-type is 2.88, 1.99 and 5.94, 3.60 at 300 K and 600 K, respectively, which is larger than that of most reported 2D thermoelectric materials. The surprising thermoelectric properties arise from the ultralow lattice thermal conductivitykl(0.25 and 1.89 W m-1K-1for SeTe2and Se2Te at 300 K), and the origin of ultralow lattice thermal conductivity is revealed. The present results suggest that 1T-phase Se2Te and SeTe2monolayer are promising candidates for thermoelectric applications.

Multishock to Quasi-Isentropic Compression of Dense Gaseous Deuterium-Helium Mixtures up to 120 GPa: Probing the Sound Velocities Relevant to Planetary Interiors.

Shock reverberation compression experiments on dense gaseous deuterium-helium mixtures are carried out to provide thermodynamic parameters relevant to the conditions in planetary interiors. The multishock pressures are determined up to 120 GPa and reshock temperatures to 7400 K. Furthermore, the unique compression path from shock-adiabatic to quasi-isentropic compressions enables a direct estimation of the high-pressure sound velocities in the unexplored range of 50-120 GPa. The equation of state and sound velocity provide particular dual perspectives to validate the theoretical models. Our experimental data are found to agree with several equation of state models widely used in astrophysics within the probed pressure range. The current data improve the experimental constraints on sound velocities in the Jovian insulating-to-metallic transition layer.

Anisotropic Thermoelectric Materials: Pentagonal PtM2 (M = S, Se, Te).

We here report a new pentagonal network structure of the PtM2 (M = S, Se, Te) monolayers with the P21/c (no. 14) space group. The electronic structure and thermoelectric properties of the pentagonal PtM2 monolayers are calculated through the VASP and BoltzTraP codes. We verify their dynamic and thermodynamic stabilities by calculating their phonon spectra and simulating ab initio molecular dynamics. It is found that the new material belongs to the medium-wide indirect band gap semiconductors from the PBE and HSE06 methods. At 300 K, the lattice thermal conductivities (Kl) of the pentagonal PtTe2 in the x and y directions are the smallest among these three materials, being 1.77 and 5.17 W/m K, respectively. The anisotropic zT values (2.60/1.14) in the x/y direction of the pentagonal PtTe2 at 300 K are much greater than those of the pentagonal PtSe2 (1.75/0.82) and the pentagonal PtS2 (0.58/0.16) at 300 K. Importantly, the p-type pentagonal PtTe2 also has excellent thermoelectric properties at 600 K, with a zT value of 5.03 in the x direction, indicating that the p-type pentagonal PtTe2 has a good application potential in the thermoelectric field.

Anisotropic lattice thermal conductivity in topological semimetal ZrGeX(X=S, Se, Te): a first-principles study.

Topological semimetals have attracted significant attentions owing to their potential applications in numerous fields such as low-power electron devices and quantum computation, which are closely related to their thermal transport properties. In this work, the phonon transport properties of topological Dirac nodal-line semimetals ZrGeX(X= S, Se, Te) with the PbClF-type structures are systematically studied using the first-principles calculations combined with the Boltzmann transport theory. The obtained lattice thermal conductivities show an obvious anisotropy, which is caused by the layer structures of ZrGeX(X= S, Se, Te). The room-temperature lattice conductivity of ZrGeTe alongcdirection is found to be as low as 0.24 W m-1 K-1, indicating that it could be of great significance in the fields of thermal coating materials and solar cell absorber. In addition, we extract each phonon branch from group velocities, phonon scattering rates, Grüneisen parameters, and phase space volumes to investigate the mechanism underlying the low thermal conductivity. It is concluded that the difference of thermal conductivities of three materials may be caused by the number of scattering channels and the effect of anharmonic. Furthermore, the phonon mean free path alongadirection is relatively longer. Nanostructures or polycrystalline structures may be effective to reduce the thermal conductivity and improve the thermoelectric properties.

Exosomal CLIC1 released by CLL promotes HUVECs angiogenesis by regulating ITGß1-MAPK/ERK axis.

Accumulating evidences have suggested that exosomes are closely associated with tumor progression by affecting cell-cell communication. Here, we aimed to investigate the roles and regulatory mechanism of exosomes released from chronic lymphocytic leukemia (CLL). The expression levels of genes and proteins in cells and exosomes were examined by quantitative real-time PCR and Western blotting, respectively. MEC-1 cell-derived exosomes were obtained and co-cultured with human umbilical vein endothelial cells (HUVECs), then the capabilities of cell proliferation, metastasis and angiogenesis of HUVECs were measured by CCK-8, wound healing, transwell and tube formation assay, respectively. Chloride intracellular channel 1 (CLIC1) was significantly increased in CLL patients and markedly enriched in exosomes secreted by CLL cells. Exosomal CLIC1 secreted from MEC-1 cells were successfully transferred into HUVECs and significantly promoted the phenotypes of proliferation, metastasis and angiogenesis of HUVECs. Mechanically, exosomal CLIC1 secreted from MEC-1 cells obviously activated MAPK/ERK signaling through upregulating integrin ß1 (ITGß1) expression in HUVECs. Furthermore, rescue experiments revealed that either silencing ITGß1 or PD98059 treatment obviously reversed the regulatory effects of exosomal CLIC1 secreted from MEC-1 cells in HUVECs. In conclusion, CLL cell-derived exosomes accelerated HUVECs metastasis and angiogenesis through transferring CLIC1 to regulate ITGß1-MAPK/ERK signaling, indicating that CLIC1 may be a therapeutic target of CLL exosomes in the tumor microenvironment.

Biaxial Tensile Strain-Induced Enhancement of Thermoelectric Efficiency of α-Phase Se2Te and SeTe2 Monolayers.

Thermoelectric (TE) materials can convert waste heat into electrical energy, which has attracted great interest in recent years. In this paper, the effect of biaxial-tensile strain on the electronic properties, lattice thermal conductivity, and thermoelectric performance of α-phase Se2Te and SeTe2 monolayers are calculated based on density-functional theory and the semiclassical Boltzmann theory. The calculated results show that the tensile strain reduces the bandgap because the bond length between atoms enlarges. Moreover, the tensile strain strengthens the scatting rate while it weakens the group velocity and softens the phonon model, leading to lower lattice thermal conductivity kl. Simultaneously, combined with the weakened kl, the tensile strain can also effectively modulate the electronic transport coefficients, such as the electronic conductivity, Seebeck coefficient, and electronic thermal conductivity, to greatly enhance the ZT value. In particular, the maximum n-type doping ZT under 1% and 3% strain increases up to six and five times higher than the corresponding ZT without strain for the Se2Te and SeTe2 monolayers, respectively. Our calculations indicated that the tensile strain can effectively enhance the thermoelectric efficiency of Se2Te and SeTe2 monolayers and they have great potential as TE materials.

Novel structural phases and the properties of LaX (X = P, As) under high pressure: first-principles study.

The particle swarm optimization algorithm and density functional theory (DFT) are extensively performed to determine the structures, phase transition, mechanical stability, electronic structures, and thermodynamic properties of lanthanide phosphates (LaP and LaAs) in the pressure range of 0 to 100 GPa. Two novel high-pressure structures of LaP and LaAs are first reported here. It is found that LaX (X = P, As) undergo a phase transition from NaCl-type structure (Fm3m) to CsCl-type structure (P4/mmm) at 19.04 GPa and 17.22 GPa, respectively. With the elevation of the pressure, C2/m-LaP and Imma-LaAs are the most stable structures up to 70.08 GPa and 85.53 GPa, respectively. Finally, the analysis of the elastic constants and hardness confirms that the C2/m-LaP possesses hardness values up to 23.24 GPa due to the strong covalent P-P bonding and ionic La-P bonding, indicating that it is a potential hard material.

Anisotropic thermoelectric properties of Weyl semimetal NbX (X = P and As): a potential thermoelectric material.

Weyl semimetal, a newly developed thermoelectric material, has aroused much interest due to its extraordinary transport properties. In this work, the thermoelectric transport properties of NbX (X = P and As), a prototypical Weyl semimetal, are investigated using the first-principles calculations together with Boltzmann transport theory. The calculated room-temperature lattice thermal conductivities along the a and c directions are 2.0 W mK-1 and 0.6 W mK-1 for NbP and 1.4 W mK-1 and 0.4 W mK-1 for NbAs, respectively. The low thermal conductivities may be useful in the thermoelectric applications. It is found that the acoustic branches have obvious contribution to the total lattice thermal conductivity, and the size dependence of the thermal conductivities can provide guidance for designing thermoelectric nanostructures. Our results show that the anisotropic structures of these compounds bring about the anisotropy of transport coefficients along the a and c directions, and the preferred direction is the c direction in thermoelectric applications. Moreover, NbP and NbAs show high ZT values of 0.82 and 0.50 along the c direction for p-type at an optimal carrier concentration, indicating that they are potential thermoelectric materials.