Cu- and Fe-Doped Ni-Mn-Sn Shape Memory Alloys with Enhanced Mechanical and Magnetocaloric Properties.

Ni-Mn-Sn-based ferromagnetic shape memory alloys (FSMAs) are multifunctional materials that are promising for solid-state refrigeration applications based on the magnetocaloric effect (MCE) and elastocaloric effect (eCE). However, a combination of excellent multi-caloric properties, suitable operating temperatures, and mechanical properties cannot be well achieved in these materials, posing a challenge for their practical application. In this work, we systematically study the phase transformations and magnetic properties of Ni50-xMn38Sn12Cux (x = 0, 2, 3, 4, 5, and 6) and Ni50-yMn38Sn12Fey (y = 0, 1, 2, 3, 4, and 5) alloys, and the magnetic-structural phase diagrams of these alloy systems are reported. The influences of the fourth-element doping on the phase transitions and magnetic properties of the alloys are elucidated by first-principles calculations. This work demonstrates that the fourth-element doping of Ni-Mn-Sn-based FSMA is effective in developing multicaloric refrigerants for practical solid-state refrigeration.

Co-Invasion of Congeneric Invasive Plants Adopts Different Strategies Depending on Their Origins.

Plant communities may be co-invaded by invasive plants, sometimes even by congeneric invasive plants (CIPs). Despite the growing understanding of co-invasion in the environment, little is known about how CIP interactions and mechanisms regulate co-invasion. Darwin's naturalisation conundrum predicts that the coexistence of closely related species is difficult due to their structural and behavioural similarities. Nevertheless, communities containing closely related species are more susceptible to being invaded because close relatives may favour similar environments; therefore, this hypothesis should be followed in the co-invasion of CIPs. To explore whether the phylogenetic relatedness and origins of invasive species to CIPs can promote or hinder co-invasion, we conducted a controlled interaction and soil-legacy greenhouse experiment to quantify the growth response of invasive plants and their congeners. We consistently found that CIPs of identical origin were more likely to co-invade compared to CIPs of distinct origins. CIPs of distinct origins exhibited an antagonistic effect on co-invasion by allelopathy. Invasive plant-conditioned soil was more conducive to the growth of CIPs of identical origin than CIPs of distinct origins. Our results revealed the different effects of invader-invader phylogenetic relatedness on co-invader success and impact, suggesting the operation of different mechanisms across co-invasion.

Corrosion Behavior of Nacre-Inspired (TiBw-TiB2)/Al Composites Fabricated by Freeze Casting.

Nacre-inspired metal matrix composites have received much attention due to their excellent deformation coordination ability, which can achieve the synergy of strength and ductility. The preparation of nacre-like Al matrix composites by freeze casting has been a promising application, but the continuous ceramic-rich layer affects the corrosion resistance of the composites, facing complex corrosion problems during service. In this work, the microstructure and corrosion behavior of the nacre-inspired (TiBw-TiB2)/Al composites fabricated by freeze casting and squeeze casting were systematically studied. The results indicated that the Al layers and ceramic-rich layers had little change, about 35 µm and 31 µm, respectively, with an increasing ratio of the Ti/TiB2. Meanwhile, a high Ti/TiB2 ratio resulted in an increase in the Fe-Ti intermetallic phases, which was detrimental to the corrosion performance of the composites and was prone to pitting. The electrochemical test results showed that the 3Ti7TiB2 composite had the lowest corrosion current density (15.9 µA) and intergranular corrosion depth (231 µm), indicating that it had the best corrosion resistance, which can be attributable to its stable and dense passivation film. Two different corrosion phenomena during the intergranular corrosion test existed in the present nacre-inspired (TiBw-TiB2)/Al composites: intergranular corrosion in the Al matrix layer and pitting corrosion in the ceramic-rich layer. Among all the composites, the corrosion depth of the 3Ti7TiB2 composite was the smallest and significantly less than that of the 2024Al alloy. In addition, the continuous ceramic-rich layer acted as a corrosion channel during corrosion, significantly degrading the corrosion resistance of the nacre-like Al composites.

Flexible Resource Allocation-Efficient Water Use Strategies Facilitate Invasion of Invasive Vine Sicyos angulatus L.

The invasive vine Sicyos angulatus L. destroys the natural ecosystem of invaded areas. Understanding the differences in growth and development between S. angulatus and other plants is necessary to explore the invasion mechanisms of S. angulatus and implement appropriate prevention and control measures. Thus, this study compared the growth, photosynthesis, and root characteristics of invasive liana S. angulatus and other three vine plants, Ipomoea nil (L.) Roth, Ipomoea purpurea (L.), and Thladiantha dubia Bunge, at different growth stages: seedling, flowering, and fruiting. The results showed that the total biomass of S. angulatus in the fruiting stage was 3-6 times that of the other three plants, and the root biomass ratio and root-shoot ratio decreased throughout the growth stage. Throughout the growth stage, the total leaf area of S. angulatus was significantly higher than that of the other three plant types, and the specific leaf area of S. angulatus at the seedling and flowering stages was 2.5-3 and 1.4-3 times that of the other three plants, respectively. The photosynthetic rate, stomatal conductance, and transpiration rate of S. angulatus at the fruiting stage were significantly higher than those of the other three plants, and its water use efficiency was higher than that of the other three plants at the three growth stages, indicating its strong photosynthetic capacity. The root activity and root pressure of S. angulatus were also significantly higher than those of the other three plants at the seedling and flowering stages. These results show that S. angulatus flexibly allocates resources to its aboveground parts during the growth stage to ensure that the plant obtains the space necessary for its growth and development and that with the help of higher root pressure and root activity, S. angulatus can maintain higher photosynthesis and water use efficiency with fewer resources. Therefore, the prevention and control of S. angulatus requires a combination of aboveground and underground measures. Spraying conventional weedicide/herbicide and manually removing aboveground plants may lead to its resurgence.

Atomically Engineered Encapsulation of SnS2 Nanoribbons by Single-Walled Carbon Nanotubes for High-Efficiency Lithium Storage.

Rechargeable lithium-ion batteries are integral to contemporary energy storage, yet current anode material systems struggle to meet the increasing demand for extended range capabilities. This work introduces a novel composite anode material composed of one-dimensional 2H-phase tin disulfide (SnS2) nanoribbons enclosed within cavities of single-walled carbon nanotubes (SnS2@SWCNTs), achieved through precise atomic engineering. Employing aberration-corrected transmission electron microscopy, we precisely elucidated the crystal structure of SnS2 within the confines of the SWCNTs. This deliberate design effectively addresses the inherent limitations of SnS2 as a lithium-ion anode material, including its low electrical conductivity, considerable volume expansion effects, and unstable solid electrolyte interface membrane. Testing confirmed that SnS2 transforms into the Li5Sn2 alloy phase after full lithiation and back to SnS2 after delithiation, showing excellent reversibility. The composite also benefits from edge effects, improving lithium storage through stronger binding and lower migration barriers, which were supported by calculations. This pioneering work advances high-performance anode materials for applications.

Danshensu reduces neuronal excitability by enhancing potassium currents in bushy cells in the mouse cochlear nucleus.

Danshensu, also known as salvianic acid A, is a primary active compound extracted from a traditional Chinese herb Danshen (Salvia miltiorrhiza). While its antioxidative and neuroprotective effects are well-documented, the underlying mechanisms are poorly understood. In this study, we sought out to investigate if and how Danshensu modulates neuronal excitability and voltage-gated ionic currents in the central nervous system. We prepared brain slices of the mouse brainstem and performed patch-clamp recording in bushy cells in the anteroventral cochlear nucleus, with or without Danshensu incubation for 1 h. QX-314 was used internally to block Na+ current, while tetraethylammonium and 4-aminopyridine were used to isolate different subtypes of K+ current. We found that Danshensu of 100 µm decreased the input resistance of bushy cells by approximately 60% and shifted the voltage threshold of spiking positively by approximately 7 mV, resulting in significantly reduced excitability. Furthermore, we found this reduced excitability by Danshensu was caused by enhanced voltage-gated K+ currents in these neurons, including both low voltage-activated IK,A, by approximately 100%, and high voltage-activated IK,dr, by approximately 30%. Lastly, we found that the effect of Danshensu on K+ currents was dose-dependent in that no enhancement was found for Danshensu of 50 µm and Danshensu of 200 µm failed to cause significantly more enhancement on K+ currents when compared to that of 100 µm. We found that Danshensu reduced neuronal excitability in the central nervous system by enhancing voltage-gated K+ currents, providing mechanistic support for its neuroprotective effect widely seen in vivo.

Strength-Plasticity Relationship and Intragranular Nanophase Distribution of Hybrid (GNS + SiCnp)/Al Composites Based on Heat Treatment.

The distribution of reinforcements and interfacial bonding state with the metal matrix are crucial factors in achieving excellent comprehensive mechanical properties for aluminum (Al) matrix composites. Normally, after heat treatment, graphene nanosheets (GNSs)/Al composites experience a significant loss of strength. Here, better performance of GNS/Al was explored with a hybrid strategy by introducing 0.9 vol.% silicon carbide nanoparticles (SiCnp) into the composite. Pre-ball milling of Al powders and 0.9 vol.% SiCnp gained Al flakes that provided a large dispersion area for 3.0 vol.% GNS during the shift speed ball milling process, leading to uniformly dispersed GNS for both as-sintered and as-extruded (0.9 vol.% SiCnp + 3.0 vol.% GNS)/Al. High-temperature heat treatment at 600 °C for 60 min was performed on the as-extruded composite, giving rise to intragranular distribution of SiCnp due to recrystallization and grain growth of the Al matrix. Meanwhile, nanoscale Al4C3, which can act as an additional reinforcing nanoparticle, was generated because of an appropriate interfacial reaction between GNS and Al. The intragranular distribution of both nanoparticles improves the Al matrix continuity of composites and plays a key role in ensuring the plasticity of composites. As a result, the work hardening ability of the heat-treated hybrid (0.9 vol.% SiCnp + 3.0 vol.% GNS)/Al composite was well improved, and the tensile elongation increased by 42.7% with little loss of the strength. The present work provides a new strategy in achieving coordination on strength-plasticity of Al matrix composites.

Engineering of the AAV-Compatible Hair Cell-Specific Small-Size Myo15 Promoter for Gene Therapy in the Inner Ear.

Adeno-associated virus (AAV)-mediated gene therapy is widely applied to treat numerous hereditary diseases in animal models and humans. The specific expression of AAV-delivered transgenes driven by cell type-specific promoters should further increase the safety of gene therapy. However, current methods for screening cell type-specific promoters are labor-intensive and time-consuming. Herein, we designed a "multiple vectors in one AAV" strategy for promoter construction in vivo. Through this strategy, we truncated a native promoter for Myo15 expression in hair cells (HCs) in the inner ear, from 1,611 bp down to 1,157 bp, and further down to 956 bp. Under the control of these 2 promoters, green fluorescent protein packaged in AAV-PHP.eB was exclusively expressed in the HCs. The transcription initiation ability of the 2 promoters was further verified by intein-mediated otoferlin recombination in a dual-AAV therapeutic system. Driven by these 2 promoters, human otoferlin was selectively expressed in HCs, resulting in the restoration of hearing in treated Otof -/- mice for at least 52 weeks. In summary, we developed an efficient screening strategy for cell type-specific promoter engineering and created 2 truncated Myo15 promoters that not only restored hereditary deafness in animal models but also show great potential for treating human patients in future.

Multifunctional MOF@COF Nanoparticles Mediated Perovskite Films Management Toward Sustainable Perovskite Solar Cells.

Although covalent organic frameworks (COFs) with high π-conjugation have recently exhibited great prospects in perovskite solar cells (PSCs), their further application in PSCs is still hindered by face-to-face stacking and aggregation issues. Herein, metal-organic framework (MOF-808) is selected as an ideal platform for the in situ homogeneous growth of a COF to construct a core-shell MOF@COF nanoparticle, which could effectively inhibit COF stacking and aggregation. The synergistic intrinsic mechanisms induced by the MOF@COF nanoparticles for reinforcing intrinsic stability and mitigating lead leakage in PSCs have been explored. The complementary utilization of π-conjugated skeletons and nanopores could optimize the crystallization of large-grained perovskite films and eliminate defects. The resulting PSCs achieve an impressive power conversion efficiency of 23.61% with superior open circuit voltage (1.20 V) and maintained approximately 90% of the original power conversion efficiency after 2000 h (30-50% RH and 25-30 °C). Benefiting from the synergistic effects of the in situ chemical fixation and adsorption abilities of the MOF@COF nanoparticles, the amount of lead leakage from unpackaged PSCs soaked in water (< 5 ppm) satisfies the laboratory assessment required for the Resource Conservation and Recovery Act Regulation.

Effect of Particle Strength on SiCp/Al Composite Properties with Network Architecture Design.

Recent works have experimentally proven that metal matrix composites (MMCs) with network architecture present improved strength-ductility match. It is envisaged that the performance of architecturally designed composites is particularly sensitive to reinforcement strength. Here, reinforcing particles with various fracture strengths were introduced in numerical models of composites with network particle distribution. The results revealed that a low particle strength (1 GPa) led to early-stage failure and brittle fracture. Nevertheless, a high particle strength (5 GPa) delayed the failure behavior and led to ductile fracture at the SiC/Al-Al macro-interface areas. Therefore, the ultimate tensile strengths (UTS) of the network SiC/Al composites increased from 290 to 385 MPa, with rising particle strength from 1 to 5 GPa. Based on the composite property, different particle fracture threshold strengths existed for homogeneous (~2.7 GPa) and network (~3.7 GPa) composites. The higher threshold strength in network composites was related to the increased stress concentration induced by network architecture. Unfortunately, the real fracture strength of the commercial SiC particle is 1-2 GPa, implying that it is possible to select a high-strength particle necessary for efficient network architecture design.

Large Cyclability of Elastocaloric Effect in Highly Porous Ni-Fe-Ga Foams.

Solid-state refrigeration based on elastocaloric materials (eCMs) requires reversibility and repeatability. However, the intrinsic intergranular brittleness of ferromagnetic shape memory alloys (FMSMAs) limits fatigue life and, thus, is the crucial bottleneck for its industrial applications. Significant cyclic stability of elastocaloric effects (eCE) via 53% porosity in Ni-Fe-Ga FMSMA has already been proven. Here, Ni-Fe-Ga foams (single-/hierarchical pores) with high porosity of 64% and 73% via tailoring the material's architecture to optimize the eCE performances are studied. A completely reversible superelastic behavior at room temperature (297 K) is demonstrated in high porosity (64-73%) Ni-Fe-Ga foams with small stress hysteresis, which is greatly conducive to durable fatigue life. Consequentially, hierarchical pore foam with 64% porosity exhibits a maximum reversible ∆Tad of 2.0 K at much lower stress of 45 MPa with a large COPmat of 34. Moreover, it shows stable elastocaloric behavior (ΔTad = 2.0 K) over >300 superelastic cycles with no significant deterioration. The enhanced eCE cyclability can be attributed to the pore hierarchies, which remarkably reduce the grain boundary constraints and/or limit the propagation of cracks to induce multiple stress-induced martensitic transformations (MTs). Therefore, this work paves the way for designing durable fatigue life FMSMAs as promising eCMs by manipulating the material architectures.

Interfacial Electron Transfer in PbI2@Single-Walled Carbon Nanotube van der Waals Heterostructures for High-Stability Self-Powered Photodetectors.

Acquiring a deep insight into the electron transfer mechanism and applications of one-dimensional (1D) van der Waals heterostructures (vdWHs) has always been a significant challenge. Herein, through direct observation using aberration-corrected transmission electron microscopy (AC-TEM), we verify the stable formation of a high-quality 1D heterostructure composed of PbI2@single-walled carbon nanotubes (SWCNTs). The phenomenon of electron transfer between PbI2 and SWCNT is elucidated through spectroscopic investigations, including Raman and X-ray photoelectron spectroscopy (XPS). Electrochemical testing indicates the electron transfer and enduring stability of 1D PbI2 within SWCNTs. Moreover, leveraging the aforementioned electron transfer mechanism, we engineer self-powered photodetectors that exhibit exceptional photocurrent and a 3-order-of-magnitude switching ratio. Subsequently, we reveal its unique electron transfer behavior using Kelvin probe force microscopic (KPFM) tests. According to KPFM, the average surface potential of SWCNTs decreases by 80.6 mV after filling. Theoretical calculations illustrate a charge transfer of 0.02 e per unit cell. This work provides an effective strategy for the in-depth investigation and application of electron transfer in 1D vdWHs.

Ni/Mg Dual Concentration-Gradient Surface Modification to Enhance Structural Stability and Electrochemical Performance of Li-Rich Layered Oxides.

Li-rich layered oxides (LRLOs), with the advantages of high specific capacity and low cost, are considered as candidates for the next-generation cathode of lithium-ion batteries (LIBs). Unfortunately, sluggish kinetics and interfacial degradation lead to capacity loss and voltage decay of the material during cycling. To address these issues, we propose a Ni/Mg dual concentration-gradient modification strategy for LRLOs. From the center to the surface of the modified materials, the contents of Ni and Mg are gradually increased while the content of Mn is decreased. The high Ni content on the surface increases the proportion of cationic redox, elevating the operating voltage and accelerating reaction kinetics. Moreover, the doped Mg on the surface of the material acting as a stabilizing pillar suppresses the migration of transition metals, stabilizing the layered structure. Therefore, the material with the Ni/Mg dual concentration-gradients delivers a superior electrochemical performance, exhibiting a suppressed voltage decay of 2.8 mV per cycle during 200 cycles (1 C, 2-4.8 V) and an excellent rate capability of 94.84 mAh/g at 7C. This study demonstrates a synergic design to construct high-performance LRLO cathode materials for LIBs.

Hair cell-specific Myo15 promoter-mediated gene therapy rescues hearing in DFNB9 mouse model.

Adeno-associated viral (AAV) vectors are increasingly used as vehicles for gene delivery to treat hearing loss. However, lack of specificity of the transgene expression may lead to overexpression of the transgene in nontarget tissues. In this study, we evaluated the expression efficiency and specificity of transgene delivered by AAV-PHP.eB under the inner ear sensory cell-specific Myo15 promoter. Compared with the ubiquitous CAG promoter, the Myo15 promoter initiates efficient expression of the GFP fluorescence reporter in hair cells, while minimizing non-specific expression in other cell types of the inner ear and CNS. Furthermore, using the Myo15 promoter, we constructed an AAV-mediated therapeutic system with the coding sequence of OTOF gene. After inner ear injection, we observed apparent hearing recovery in Otof-/- mice, highly efficient expression of exogenous otoferlin, and significant improvement in the exocytosis function of inner hair cells. Overall, our results indicate that gene therapy mediated by the hair cell-specific Myo15 promoter has potential clinical application for the treatment of autosomal recessive deafness and yet for other hereditary hearing loss related to dysfunction of hair cells.

Nanogap engineering of 3D nanoraspberries into 2D plasmonic nanoclusters toward improved SERS performance.

3D raspberry-like core/satellite nanostructures were prepared by controlled surface functionalization of silica spheres using crosslinked poly(4-vinylpyridine) (P4VP) chains with known binding affinity for gold nanoparticles (AuNPs). The 3D SiO2-g-P(4VP-co-DVB)/AuNP nanoraspberries can be further transformed into 2D plasmonic nanoclusters by etching the silica core with hydrofluoric acid (HF). After the transformation, the interparticle distance between the AuNPs dramatically reduced from a 10 nm scale to sub 2 nm. Owing to the strong electromagnetic field generated by the plasmonic coupling between AuNPs in very close proximity, the established P(4VP-co-DVB)/AuNP nanoclusters provided strong and undisturbed Raman signals as a SERS substrate. In addition, benefiting from the stabilizing effect of the crosslinked P(4VP-co-DVB) network, the prepared SERS substrate has the advantages of good uniformity, stability and reproducibility, as well as strong SERS enhancement, endowing it with great potential for rapid and efficient SERS detection.

The Key Role of Liraglutide in Preventing Autophagy of Vascular Smooth Muscle Cells in High Glucose Conditions

Background: The glucagon-like peptide-1 (GLP-1) receptor agonist liraglutide (LIRA) is a potential hypoglycemic drug with anti-atherosclerosis (AS) effects. Autophagy in the vascular smooth muscle cells (VSMCs) facilitates AS. However, the role of autophagy in the anti-AS mechanism of LIRA remains unclear. Aims: To examine the role and mechanisms of autophagy in LIRA's improvement of the biological characteristics of VSMCs in high glucose conditions. Study Design: Experimental animal study. Methods: VSMCs isolated from the thoracic aorta of male SD rats were subjected to a high glucose (HG) condition (25 mM) in Dulbecco's Modified Eagle's Medium with or without LIRA, the GLP-1 receptor antagonist exendin9-39 (Exe9-39), a phosphatidylinositol 3-kinase (PI3K) inhibitor (LY294002), and autophagy inhibitors (3-methyladenine [3-MA] and bafilomycin A1 [Baf A1]). Acridine orange staining, western blotting, transmission electron microscopy, and mCherry-GFP-LC3 transfection were performed to evaluate the autophagy flux. Additionally, VSMC migration, calcification, proliferation, and apoptosis in HG conditions were observed. Results: Addition of LIRA alone or in combination with autophagy inhibitors significantly downregulated Beclin, increased the LC3-II/LC3-I ratio, and upregulated p62 in VSMCs in HG conditions. Furthermore, autophagolysosome formation was markedly curbed after treatment with LIRA and/or autophagy inhibitors. Inhibition of autophagy by LIRA and/or the autophagy inhibitors attenuated VSMC phenotype conversion, proliferation, migration, and calcification and promoted VSMC apoptosis in HG conditions. This protective role of LIRA was augmented by LY294002, but inhibited by Exe9-39. Conclusion: LIRA plays a significant role in the improvement of the biological features of VSMCs in HG conditions.

Regulating Grind-Induced Lattice Distortion for Nickel-Rich Cathodes by Annealing.

The commercialization of high-performance nickel-rich cathodes always awaits a cost-effective, environmentally friendly, and large-scale preparation method. Despite a grinding process normally adopted in the synthesis of the nickel-rich cathodes, lattice distortion, rough surface, and sharp edge transformation inevitably occurr in the resultant samples. In this work, an additional annealing process is proposed that aims at regulating lattice distortion as well as achieving round and smoother morphologies without any structural or elemental modifications. Such a structural enhancement is favored for improved lithium diffusion and electrochemical stability during cycling. Consequently, the annealed cathodes demonstrate a considerable enhancement in capacity retention, escalating from 68.7% to 91.9% after 100 cycles at 1 C. Additionally, the specific capacity is significantly increased from 64 to 142 mAh g-1 at 5 C when compared to the unannealed cathodes. This work offers a straightforward and effective approach for reinforcing the electrochemical properties of nickel-rich cathodes.

Consistent analysis of differentially expressed genes across 7 cell types in papillary thyroid carcinoma.

Single-cell transcriptome sequencing (scRNA-seq) provides a higher resolution of cellular differences than bulk RNA-seq, enabling the dissection of cell-type-specific responses to perturbations in papillary thyroid carcinoma (PTC). However, cellular genomic features are highly heterogeneous and have a large number of genes without any expression signals, which hinders the statistical power to identify differentially expressed genes and may generate many false-positive results. To overcome this challenge, we conducted an integrative analysis on two PTC scRNA-seq datasets and cross-validated consistent differential expression. By combining results from 32 common cell types in the two studies, we identified 31 consistently differentially expressed genes (DEGs) across seven cell types, including B cells, endothelial cells, epithelial cells, monocytes, NK cells, smooth muscle cells, and T cells. Functional enrichment analysis revealed that these genes are important for the adaptive immune response and autoimmune thyroid diseases. The additional disease-free survival analysis also confirmed that these 31 genes significantly affected patient survival time in large scale thyroid cancer cohort. Furthermore, we experimentally validated one of the top consistent DEGs as a potential biomarker gene of PTC epithelial cells, KRT7, which may be a upstream gene for the NF-κB signaling pathway. The result shows that KRT7 may promote thyroid cancer metastasis through the epithelial-mesenchymal transition and NF-κB signaling pathway. In summary, our single-cell transcriptome integration-based approach may provide insights into the important role of NF-κB in the underlying biology of the PTC.

Abnormal developmental trajectory and vulnerability to cardiac arrhythmias in tetralogy of Fallot with DiGeorge syndrome.

Tetralogy of Fallot (TOF) is the most common cyanotic congenital heart disease. Ventricular dysfunction and cardiac arrhythmias are well-documented complications in patients with repaired TOF. Whether intrinsic abnormalities exist in TOF cardiomyocytes is unknown. We establish human induced pluripotent stem cells (hiPSCs) from TOF patients with and without DiGeorge (DG) syndrome, the latter being the most commonly associated syndromal association of TOF. TOF-DG hiPSC-derived cardiomyocytes (hiPSC-CMs) show impaired ventricular specification, downregulated cardiac gene expression and upregulated neural gene expression. Transcriptomic profiling of the in vitro cardiac progenitors reveals early bifurcation, as marked by ectopic RGS13 expression, in the trajectory of TOF-DG-hiPSC cardiac differentiation. Functional assessments further reveal increased arrhythmogenicity in TOF-DG-hiPSC-CMs. These findings are found only in the TOF-DG but not TOF-with no DG (ND) patient-derived hiPSC-CMs and cardiac progenitors (CPs), which have implications on the worse clinical outcomes of TOF-DG patients.

Heterogeneity and potential therapeutic insights for triple-negative breast cancer based on metabolic-associated molecular subtypes and genomic mutations.

Objective: Due to a lack of effective therapy, triple-negative breast cancer (TNBC) is extremely poor prognosis. Metabolic reprogramming is an important hallmark in tumorigenesis, cancer diagnosis, prognosis, and treatment. Categorizing metabolic patterns in TNBC is critical to combat heterogeneity and targeted therapeutics. Methods: 115 TNBC patients from TCGA were combined into a virtual cohort and verified by other verification sets, discovering differentially expressed genes (DEGs). To identify reliable metabolic features, we applied the same procedures to five independent datasets to verify the identified TNBC subtypes, which differed in terms of prognosis, metabolic characteristics, immune infiltration, clinical features, somatic mutation, and drug sensitivity. Results: In general, TNBC could be classified into two metabolically distinct subtypes. C1 had high immune checkpoint genes expression and immune and stromal scores, demonstrating sensitivity to the treatment of PD-1 inhibitors. On the other hand, C2 displayed a high variation in metabolism pathways involved in carbohydrate, lipid, and amino acid metabolism. More importantly, C2 was a lack of immune signatures, with late pathological stage, low immune infiltration and poor prognosis. Interestingly, C2 had a high mutation frequency in PIK3CA, KMT2D, and KMT2C and displayed significant activation of the PI3K and angiogenesis pathways. As a final output, we created a 100-gene classifier to reliably differentiate the TNBC subtypes and AKR1B10 was a potential biomarker for C2 subtypes. Conclusion: In conclusion, we identified two subtypes with distinct metabolic phenotypes, provided novel insights into TNBC heterogeneity, and provided a theoretical foundation for therapeutic strategies.