Application of synthesized metal-trimesic acid frameworks for the remediation of a multi-metal polluted soil and investigation of quinoa responses.

Metal-organic frameworks (MOFs) are structures with high surface area that can be used to remove heavy metals (HMs) efficiently from the environment. The effect of MOFs on HMs removal from contaminated soils has not been already investigated. Monometallic MOFs are easier to synthesize with high efficiency, and it is also important to compare their structures. In the present study, Zn-BTC, Cu-BTC, and Fe-BTC as three metal-trimesic acid MOFs were synthesized from the combination of zinc (Zn), copper (Cu), and iron (Fe) nitrates with benzene-1,3,5-tricarboxylic acid (H3BTC) by solvothermal method. BET analysis showed that the specific surface areas of the Zn-BTC, Cu-BTC, and Fe-BTC were 502.63, 768.39 and 92.4 m2g-1, respectively. The synthesized MOFs were added at the rates of 0.5 and 1% by weight to the soils contaminated with 100 mgkg-1 of Zn, nickel (Ni), lead (Pb), and cadmium (Cd). Then quinoa seeds were sown in the treated soils. According to the results, the uptakes of all four HMs by quinoa were the lowest in the Cu-BTC 1% treated pots and the lowest uptakes were observed for Pb in shoot and root (4.87 and 0.39, µgpot-1, respectively). The lowest concentration of metal extracted with EDTA in the post-harvest soils was for Pb (11.86 mgkg-1) in the Cu-BTC 1% treatment. The lowest metal pollution indices were observed after the application of Cu-BTC 1%, which were 20.29 and 11.53 for shoot and root, respectively. With equal molar ratios, highly porous and honeycomb-shaped structure, the most crystallized and the smallest constituent particle size (34.64 nm) were obtained only from the combination of Cu ions with H3BTC. The lowest porosity, crystallinity, and a semi-gel like feature was found for the Fe-BTC. The synthesized Cu-BTC showed the highest capacity of stabilizing HMs, especially Pb in the soil compared to the Zn-BTC and the Fe-BTC. The highly porous characteristic of the Cu-BTC can make the application of this MOF as a suitable environmental solution for the remediation of high Pb-contaminated soils.

Natural solution for the remediation of multi-metal contamination: application of natural amino acids, Pseudomonas fluorescens and Micrococcus yunnanensis to increase the phytoremediation efficiency.

Natural amino acids (NAA) have been rarely investigated as chelators, despite their ability to chelate heavy metals (HMs). In the present research, the effects of extracted natural amino acids, as a natural and environmentally friendly chelate agent and the inoculation of Pseudomonas fluorescens (PF) and Micrococcus yunnanensis (MY) bacteria were investigated on some responses of quinoa in a soil polluted with Pb, Ni, Cd, and Zn. Inoculation of PGPR bacteria enhanced plant growth and phytoremediation efficiency. Pb and Cd were higher in quinoa roots, while Ni and Zn were higher in the shoots. The highest efficiencies were observed with NAA treatment and simultaneous inoculation of PF and MY bacteria for Ni, Cd, Pb, and Zn. The highest values of phytoremediation efficiency and uptake efficiency of Ni, Cd, Pb, and Zn were 21.28, 19.11, 14.96 and 18.99 µg g-1, and 31.52, 60.78, 51.89, and 25.33 µg g-1, respectively. Results of present study well demonstrated NAA extracted from blood powder acted as strong chelate agent due to their diversity in size, solubilizing ability, abundant functional groups, and potential in the formation of stable complexes with Ni, Cd, Pb, and Zn, increasing metal availability in soil and improving phytoremediation efficiency in quinoa.

This study focused on an underexplored topic, the potential of natural amino acids (NAA) and plant growth-promoting rhizobacteria (PGPRs) to enhance phytoremediation efficiency of quinoa in a multi-metal contaminated soil with the waste recycling approach. Despite their chelating abilities, NAA have been rarely studied in this context. In the present study, the effects of extracted NAA, acting as environmentally friendly chelating agents, and the inoculation of Pseudomonas fluorescens (PF) and Micrococcus yunnanensis (MY) bacteria were examined on the responses of quinoa in a soil contaminated with Pb, Ni, Cd, and Zn.

Efficient Immobilization of heavy metals using newly synthesized magnetic nanoparticles and some bacteria in a multi-metal contaminated soil.

Simultaneous application of modified Fe3O4 with biological treatments in remediating multi-metal polluted soils, has rarely been investigated. Thus, a pioneering approach towards sustainable environmental remediation strategies is crucial. In this study, we aimed to improve the efficiency of Fe3O4 as adsorbents for heavy metals (HMs) by applying protective coatings. We synthesized core-shell magnetite nanoparticles coated with modified nanocellulose, nanohydrochar, and nanobiochar, and investigated their effectiveness in conjunction with bacteria (Pseudomonas putida and Bacillus megaterium) for remediating a multi-metal contamination soil. The results showed that the coatings significantly enhanced the immobilization of heavy metals in the soil, even at low doses (0.5%). The coating of nanocellulose had the highest efficiency in stabilizing metals due to the greater variety of surface functional groups and higher specific surface area (63.86 m2 g-1) than the other two coatings. Interestingly, uncoated Fe3O4 had lower performance (113.6 m2 g-1) due to their susceptibility to deformation and oxidation. The use of bacteria as a biological treatment led to an increase in the stabilization of metals in soil. In fact, Pseudomonas putida and Bacillus megaterium increased immobilization of HMs in soil successfully because of extracellular polymeric substances and intensive negative charges. Analysis of metal concentrations in plants revealed that Ni and Zn accumulated in the roots, while Pb and Cd were transferred from the roots to the shoots. Treatment Fe3O4 coated with modified nanocellulose at rates of 0.5 and 1% along with Pseudomonas putida showed the highest effect in stabilizing metals. Application of coated Fe3O4 for in-situ immobilization of HMs in contamination soils is recommendable due to their high metal stabilization efficiency and suitability to apply in large quantities.

Identification of influential parameters and conditions in heavy metals adsorption onto Cal-LDH-PC using optimization approaches of RSM and Taguchi.

Adsorption process plays an important role in the remediation of heavy metals (HMs) from wastewater. A laboratory trial was conducted to investigate effective parameters for improving the bio-adsorption removal of HMs. SEM, EDX, BET, and FTIR techniques were applied to characterize the calcined layer double hydroxide (Cal-LDH), pectin (PC), and Cal-LDH-PC composite prepared from Licorice pomace. The adsorption of zinc (Zn) cadmium, nickel (Ni) and lead (Pb) onto the most efficient sorbent was investigated using RSM methodology with operational factors such as concentration, reaction time, sorbent dose, and pH. The results related to FTIR showed that Cal-LDH-PC had the highest number of functional groups. Based on the SEM results Cal-LDH had a low surface area (9.36 m2 g-1) and a small pore size (9.22 nm). After the modification process (Cal-LDH-PC), the values of surface area and pore size increased by 13-fold (120 m2 g-1) and 1.5-fold (18 nm), respectively. Cal-LDH had high adsorption performance, more cavities, stability, various functional groups, and excessive carbon and oxygen content, which make it efficient and powerful in removing HMs from wastewater. The optimal condition for achieving the removal efficiency (RE%) values of metals was determined to be 80.79 mg L-1, 100 min, 0.167 g L-1, and 9 for concentration, reaction time, sorbent dose, and pH, respectively. Maximum adsorption capacity and RE (%) were 300 mg g-1 and 99% for Zn. According to the results concentration had a major impact on RE% (except for Ni), while for Ni, adsorbent dose had the most significant impact. The present study introduced Cal-LDH-PC prepared from Licorice pomace as a capable, useful and economical sorbent for HMs removal from polluted environments. Taguchi's statistical method is distinguished as an economic method with easier interpretation, while the RSM approach is more accurate, and it can also check the interaction of parameters.

Heavy metals immobilization and bioavailability in multi-metal contaminated soil under ryegrass cultivation as affected by ZnO and MnO2 nanoparticle-modified biochar.

Pollution by heavy metals (HMs) has become a global problem for agriculture and the environment. In this study, the effects of pristine biochar and biochar modified with manganese dioxide (BC@MnO2) and zinc oxide (BC@ZnO) nanoparticles on the immobilization and bioavailability of Pb, Cd, Zn, and Ni in soil under ryegrass (Lolium perenne L.) cultivation were investigated. The results of SEM-EDX, FTIR, and XRD showed that ZnO and MnO2 nanoparticles were successfully loaded onto biochar. The results showed that BC, BC@MnO2 and BC@ZnO treatments significantly increased shoots and roots dry weight of ryegrass compared to the control. The maximum dry weight of root and shoot (1.365 g pot-1 and 4.163 g pot-1, respectively) was reached at 1% BC@MnO2. The HMs uptake by ryegrass roots and shoots decreased significantly after addition of amendments. The lowest Pb, Cd, Zn and Ni uptake in the plant shoot (13.176, 24.92, 32.407, and 53.88 µg pot-1, respectively) was obtained in the 1% BC@MnO2 treatment. Modified biochar was more successful in reducing HMs uptake by ryegrass and improving plant growth than pristine biochar and can therefore be used as an efficient and cost effective amendment for the remediation of HMs contaminated soils. The lowest HMs translocation (TF) and bioconcentration factors were related to the 1% BC@MnO2 treatment. Therefore, BC@MnO2 was the most successful treatment for HMs immobilization in soil. Also, a comparison of the TF values of plant showed that ryegrass had a good ability to accumulate all studied HMs in its roots, and it is a suitable plant for HMs phytostabilization.

Applicability of the sigmoid model to estimate heavy metal uptake in maize and sorghum as affected by organic acids.

Although assisted phytoremediation using chemical treatments is a suitable technique for the removal of heavy metals (HMs), the estimation of this process using simple models is also crucial. For this purpose, a greenhouse trial was designed to evaluate the effectiveness of citric, oxalic, and tartaric acid on Cd, Pb, Ni, and Zn phytoremediation by maize and sorghum and to estimate this process using sigmoid HMs uptake model. Results showed that mean values of root and shoot dry weight and metals uptake, translocation factor (TF) of Pb and Zn, and uptake efficiency (UE) of Cd in maize were higher than sorghum but the TF of Cd and the phytoextraction efficiency (PEE) and UE of Pb in sorghum were higher than maize. Citric, oxalic, and tartaric acid significantly increased the UE of Pb by 17.7%, 22.5%, and 32.5%, respectively. Tartaric acid significantly increased the mean values of shoot dry weight, shoot Cd, Pb, and Ni uptake, and PEE of Pb and Ni, but decreased TF of Zn. The R2, NRMSE, and KM values indicated the ability of sigmoid HM uptake model in estimating HMs uptake in maize and sorghum treated with organic acids. Thus, tartaric acid was more effective than citric and oxalic acids to enhance phytoremediation potential. Sigmoid HM uptake model is suitable to estimate the HMs uptake in plants treated with organic acids at different growth stages.

Characterization of clay and nanoclay extracted from a semi-arid Vertisol and investigation of their carbon sequestration potential.

Mitigation of global climate change by means such as soil carbon (C) sequestration has become an important area of research. Soil organic matter (SOM) that is stabilized with clay minerals is the most persistent in soils. Currently, little is known regarding the C sequestration ability of nanoclay extracted from Vertisols in semi-arid regions. Therefore, the aim of this study was to extract and characterize nanoclay and bulk clay from a Vertisol from Iran, in terms of physicochemical surface properties and resistance of SOM to chemical oxidation. The clay fractions were studied before and after H2O2 treatment by total C analysis, scanning electron microscopy (SEM), transmission electron microscopy (TEM), dynamic light scattering (DLS), pyrolysis gas chromatography mass spectrometry (GC-MS), Fourier transform infrared (FTIR) spectroscopy, specific surface area analysis, and zeta potential. TEM and SEM images showed that the diameter of the extracted nanoclays was 16-46 nm and their morphology was more porous than bulk soil clay. The nanoclay had a much greater specific surface area (111.9 m2 g-1) than the bulk clay (67.9 m2 g-1). According to total C, FTIR, and zeta potential results, the nanoclay was enriched with 1.4 times more C than the bulk clay after peroxide treatment, indicating enhanced soil C stabilization in the nanoclay. About 45% of the peroxide-resistant SOM in the nanoclay was associated with N-containing compounds, indicating that these compounds contribute to SOM stability. The results demonstrate important role of nanoclay in soil C sequestration in Vertisols.

Optimization of LDO-Pectin Synthesis Conditions for the Removal of Metals from Wastewater: A Comparison of Response Surface Methods and Taguchi Approaches.

With the continuous growth of industrialization, the presence of heavy metals (HMs) in the environment has become a critical issue, necessitating cost-effective and efficient techniques for their removal. The present study aimed to determine the optimal preparation conditions for synthesizing pectin (PC) as a polymer sorbent, combined with Magnesium (Mg) Aluminum (Al) layered double oxides (LDOs), using a fast and facile co-precipitation method. Both the response surface method (RSM) and the Taguchi method were employed to optimize the influence of key independent variables, including the molar ratio of cations Mg:Al, the ratio of pectin to LDO, and the temperature for removing multiple elements from wastewater. The results indicated that RSM is more accurate and examines more interactions, while Taguchi reduces the number of tests and is more economical than RSM. However, both statistical methods showed good potential for predicting the adsorption capacity (Qe) of HMs. The optimal preparation conditions were identified as a molar ratio of 3:1, a ratio of pectin to LDO of 7% w/w, and a temperature of approximately 600 °C. In conclusion, the application of RSM and Taguchi approaches was found to be feasible and effective in optimizing the preparation conditions of modified LDO, which can be utilized as a potential adsorbent for removing multiple elements from wastewater.

Effective combination of arugula vermicompost, chitin and inhibitory bacteria for suppression of the root-knot nematode Meloidogyne javanica and explanation of their beneficial properties based on microbial analysis.

Root-knot nematodes (Meloidogyne spp.) are dangerous parasites of many crops worldwide. The threat of chemical nematicides has led to increasing interest in studying the inhibitory effects of organic amendments and bacteria on plant-parasitic nematodes, but their combination has been less studied. One laboratory and four glasshouse experiments were conducted to study the effect on M. javanica of animal manure, common vermicompost, shrimp shells, chitosan, compost and vermicompost from castor bean, chinaberry and arugula, and the combination of arugula vermicompost with some bacteria, isolated from vermicompost or earthworms. The extract of arugula compost and vermicompost, common vermicompost and composts from castor bean and chinaberry reduced nematode egg hatch by 12-32% and caused 13-40% mortality of second-stage juveniles in vitro. Soil amendments with the combination vermicompost of arugula + Pseudomonas. resinovorans + Sphingobacterium daejeonense + chitosan significantly increased the yield of infected tomato plants and reduced nematode reproduction factor by 63.1-76.6%. Comparison of chemical properties showed that arugula vermicompost had lower pH, EC, and C/N ratio than arugula compost. Metagenomics analysis showed that Bacillus, Geodermatophilus, Thermomonas, Lewinella, Pseudolabrys and Erythrobacter were the major bacterial genera in the vermicompost of arugula. Metagenomics analysis confirmed the presence of chitinolytic, detoxifying and PGPR bacteria in the vermicompost of arugula. The combination of arugula vermicompost + chitosan + P. resinovorans + S. daejeonense could be an environmentally friendly approach to control M. javanica.

Arbuscular mycorrhizal fungi and nitric oxide alleviate cadmium phytotoxicity by improving internal detoxification mechanisms of corn plants.

Plants develop several external and internal mechanisms to increase their tolerance to heavy metals (HMs) toxicity including cadmium (Cd). Symbiosis with arbuscular mycorrhizae fungi (AMF) is one of the plants' strategies to tolerate HMs toxicity. Nitric oxide (NO), as a signaling molecule, is also involved in physiological responses of plants to various stresses. The present work was conducted as a factorial completely randomized design with three replications to study the effects of Funneliformis mosseae fungi and Sodium nitroprusside (SNP, 100 mM) as a donor of NO alone, in combination (AMF + SNP) on corn plant growth, and internal detoxification mechanisms of Cd toxicity in a Cd-contaminated calcareous soil (0, 25, 50, and 100 mg Cd kg-1). The results showed that under Cd stress, AMF inoculation and/or foliar application of SNP significantly increased plant growth (32% to 103% for shoot and 44% to 84% for root) by decreasing Cd concentration in corn plant tissues (23% to 46% for shoot and 19% to 40% for root). Cd-induced oxidative stress was mitigated by AMF and/or SNP by enhancing the activities of antioxidant enzymes, including superoxide dismutase (SOD) and catalase (CAT), and concentration of non-enzymatic antioxidants such as glutathione (GSH) and phytochelatin (PC). Increasing the tolerance index (TI) and decreasing the transfer factor (TF) in the corn plants treated with AMF and/or SNP, confirm the efficient role of SNP and AMF in stimulating the detoxification mechanisms of Cd within the plant cells, which was more pronounced at the lowest Cd level (25 mg Cd kg-1). In conclusion, symbiotic associations of corn plants with AMF alone or in combination with SNP mitigated the detrimental effect of Cd toxicity in corn grown in Cd-contaminated calcareous soil. The corn's internal detoxification mechanisms lowered the Cd concentration in plant tissue which resulted in the improvement of the corn's growth parameters.

Removal of methylene blue dye from aqueous solution using an efficient chitosan-pectin bio-adsorbent: kinetics and isotherm studies.

Wastewater contains organic compounds, including dyes, which have potential risks to the environment. Hence, these compound needs to be eliminated from the aqueous solution. In the present study, chitosan-pectin composite (Cs-Pc) was used as an adsorbent to remove methylene blue dye (MB) from synthetic wastewater. To evaluate the parameters affecting adsorption, including the initial MB concentration, solution pH, contact time, and Cs-Pc dose, batch experiments were carried out. Scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), Fourier transform infrared (FTIR), and pH point of zero charges (pH pzc) were applied for characterizations of Cs-Pc. The optimum conditions were obtained with an initial MB concentration of 50 mg L-1: solution pH ~ 11, Cs-Pc dose: 1.5 g L-1 and 180 min contact time, which caused 97.77% of MB removal. In addition, the removal efficiency of MB was more influenced by pH than by sorbate dose. Also, Cs-Pc had a higher ability to remove MB than chitosan and pectin, probably due to its highly porous structure and rough surfaces that provides active sites and facilitate MB adsorption. The maximum removal efficiency and the adsorption capacity of MB onto Cs-Pc at 500 mg L-1 concentration under optimum conditions were 98.67% and 328.02 mg g-1, respectively. The adsorption kinetics and isotherms were best described by pseudo-second-order and Freundlich equation, respectively. After four times of recycling, the removal efficiency of MB was above 96%. Electrostatic and pi-pi interactions are the main mechanisms for the removal of MB onto the adsorbent. So the application of Cs-Pc is promising for MB removal from polluted solutions not only due to its strong adsorbing capability but also due to its excellent ability to reuse.

Preparation of green synthesized copper oxide nanoparticles for efficient removal of lead from wastewaters.

Green synthesis is a clean and eco-friendly process in which metal nanoparticles can be produced by the reaction between a metal salt solution and plant organ extract. In the present study, three copper oxide nanoparticles were green synthesized from the leaf extracts of astragalus (Astragalus membranaceus), rosemary (Salvia rosmarinus), and mallow (Malva sylvestris) as predominant plant cover in the study area was characterized. The effectiveness of three green synthesized nanoparticles in the adsorption of lead ions from polluted water was studied. According to the results, the removal efficiencies of the copper oxide nanoparticles synthesized from astragalus (A-CuO-NPs), rosemary (R-CuO-NPs), and mallow leaf extract (M-CuO-NPs) especially at the highest initial concentration of lead (1.5 mM), were 88.4%, 84.9%, and 69.6%, respectively. Probably due to the smooth morphology and more uniform configuration of the M-CuO-NPs, the changes between equilibrium adsorption (qe) and equilibrium concentration (Ce) were more regular than those of the A-CuO-NPs and R-CuO-NPs. Therefore, the best fit of the data to the Langmuir and Freundlich isotherms belonged to the adsorption of lead onto the M-CuO-NPs. According to the results reported herein, the copper oxide nanoparticles synthesized from different plant covers are efficient adsorption agents for lead from wastewaters solution.

Comparison of the efficiency of copper oxide nanoparticles prepared by green synthesis method using the leaf extracts of astragalus (Astragalus membranaceus), rosemary (Salvia rosmarinus) and mallow (Malva sylvestris) plants in removing lead ions from wastewater.Astragalus, as an abundant plant cover in the study area, has a capable leaf extract for green synthesis of copper nanoparticles, which its efficiency for the removal of toxic metal ions from aqueous solutions has not been already studied in previous researches.

A comparison between the function of Serendipita indica and Sinorhizobium meliloti in modulating the toxicity of zinc oxide nanoparticles in alfalfa (Medicago sativa L.).

Zinc oxide nanoparticles (ZnO-NPs) are among the most commonly used nano-fertilizers (NF). However, elevated levels of ZnO-NPs in soil may affect plant growth and development due to its potential toxicity when accumulated in large amounts in plant tissues. This research was conducted using an in situ rhizobox system with the aims of evaluating zinc uptake from nano-zinc oxide amended rhizosphere soil by alfalfa plant and the effect of plant growth-promoting microorganisms on alleviating the phytotoxicity of ZnO-NPs. Treatments included microbial inoculations (Sinorhizobium meliloti, Serendipita indica) and different ZnO-NP concentrations (0, 400, and 800 mg kg-1) with three replications. The results indicated that S. indica minimized the phytotoxicity of ZnO-NPs to alfalfa by enhancing growth rate and decreasing zinc (Zn) translocation from root to shoot. Compared with plants inoculated with S. meliloti, co-inoculation with S. indica increased the shoot dry weight by 18.33% and 8.05% at 400 and 800 mg kg-1 ZnO-NPs, respectively. However, at the highest level of ZnO-NPs (800 mg kg-1), root inoculation of S. indica and S. indica + S. meliloti decreased Zn translocation factor by 60.2% and 44.3% compared to S. meliloti, respectively. Furthermore, a distinct relation between tolerance of S. indica-colonized plant to ZnO-NPs and the ability of S. indica in inhibiting or retarding degradation of polyunsaturated lipids through prevention of excess reactive oxygen species formation was observed. Malondialdehyde content of inoculated plants with S. indica either alone or in combination with S. meliloti was significantly lower than non-inoculated plants (p< 0.01). Zn-induced oxidative stress was mitigated by S. indica through enhanced activities of catalase and peroxidase enzymes. The findings of the present study indicate the potential use of endophytes fungus S. indica for ensuring food safety and security, and human health in heavy metal-polluted soil by reducing the phytoavailability of heavy metals in the aerial parts of the host plants.

Chemical- and microbial-enhanced phytoremediation of cadmium-contaminated calcareous soil by maize.

Phytoremediation is an appropriate technology used to remove pollutants from environment components. A greenhouse trial was conducted to test the hypothesis that application of surfactant levels and inoculation with Pseudomonas fluorescens bacterium and/or Piriformospora indica fungus enhances the phytoremediation of cadmium (Cd). Maize seeds were sown in Cd-polluted soil, and after 2 months Cd status in plant tissues and Cd phytoremediation criteria was determined. Results showed that application of surfactant increased root and shoot dry weight. Mean Cd uptake in roots and shoots increased following the application of 2 and 4 mmol kg-1 Tween 80, respectively. Application of 2 mmol kg-1 Tween 80 increased mean Cd uptake efficiency, while application of 4 mmol kg-1 Tween 80 increased phytoextraction and translocation efficiencies. Inoculation with P. indica and P. fluorescens was mostly effective in increasing Cd uptake and Cd phytoextraction efficiency, respectively. Co-inoculation with P. indica and P. fluorescens had no superiority to application of each inoculant alone. Since most of the Cd remained in roots, phytostabilization is probably the main mechanism controlling Cd phytoremediation by maize. According to the results, application of Tween 80 and inoculation with P. indica and P. fluorescens effectively enhanced phytoremediation of Cd-contaminated soil by maize.

Phytoremediation of petroleum-contaminated soil by Salicornia: from PSY activity to physiological and morphological communications.

Petroleum is one of the critical environmental pollutants. Salicornia can grow in petroleum-contaminated soil. Therefore, the potential of two Iranian Salicornia species, S. persica Akhani and S. iranica Akhani, for phytoremediation of soils contaminated with 0.2% or 2% petroleum was evaluated over short (1 and 10 h) and long (100 days) periods of time. In addition, some key factors including the expression analysis of phytoene synthase, physiological and morphological factors were studied. Both species reduced the petroleum in 0.2% and 2% petroleum-contaminated soils to 40% and 60% of the initial amount, respectively. The expression of PSY increased twice more than the control 10 h after 0.2% petroleum stress and the carotenoid content increased twice more than the control. Chlorophyll a and total chlorophyll decreased three times less than the control in both contamination levels, while chlorophyll b decreased three times less than the control only in 2% contamination. The proline content peaked 10 h after 2% stress as it was 10 times more than the control. Promoter analysis of PSY showed the existence of responsive cis-acting elements to abscisic acid suggesting the key role of this gene in abiotic stresses.

Effectiveness of arbuscular mycorrhizal fungi in phytoremediation of lead- contaminated soil by vetiver grass.

A greenhouse experiment was conducted to evaluate the effectiveness of arbuscular mycorrhizal (AM) fungi in phytoremediation of lead (Pb)-contaminated soil by vetiver grass. Experiment was a factorial arranged in a completely randomized design. Factors included four Pb levels (50, 200, 400, and 800 mg kg(-1)) as Pb (NO3)2, AM fungi at three levels (non mycorrhizal (NM) control, Rhizophagus intraradices, Glomus versiforme). Shoot and root dry weights (SDW and RDW) decreased as Pb levels increased. Mycorrhizal inoculation increased SDW and RDW compared to NM control. With mycorrhizal inoculation and increasing Pb levels, Pb uptake of shoot and root increased compared to those of NM control. Root colonization increased with mycorrhizal inoculation but decreased as Pb levels increased. Phosphorus concentration and uptake in shoot of plants inoculated with AM fungi was significantly higher than NM control at 200 and 800 mg Pb kg(-1). The Fe concentration, Fe and Mn uptake of shoot in plants inoculated with Rhizophagus intraradices in all levels of Pb were significantly higher than NM control. Mycorrhizal inoculation increased Pb extraction, uptake and translocation efficiencies. Lead translocation factor decreased as Pb levels increased; however inoculation with AM fungi increased Pb translocation.