Digital Alloy-Grown InAs/GaAs Short-Period Superlattices with Tunable Band Gaps for Short-Wavelength Infrared Photodetection.

The InGaAs lattice-matched to InP has been widely deployed as the absorption material in short-wavelength infrared photodetection applications such as imaging and optical communications. Here, a series of digital alloy (DA)-grown InAs/GaAs short-period superlattices were investigated to extend the absorption spectral range. The scanning transmission electron microscopy, high-resolution X-ray diffraction, and atomic force microscopy measurements exhibit good material quality, while the photoluminescence (PL) spectra demonstrate a wide band gap tunability for the InGaAs obtained via the DA growth technique. The photoluminescence peak can be effectively shifted from 1690 nm (0.734 eV) for conventional random alloy (RA) InGaAs to 1950 nm (0.636 eV) for 8 monolayer (ML) DA InGaAs at room temperature. The complete set of optical constants of DA InGaAs has been extracted via the ellipsometry technique, showing the absorption coefficients of 398, 831, and 1230 cm-1 at 2 µm for 6, 8, and 10 ML DA InGaAs, respectively. As the period thickness increases for DA InGaAs, a red shift at the absorption edge can be observed. Furthermore, the simulated band structures of DA InGaAs via an environment-dependent tight binding model agree well with the measured photoluminescence peaks, which is advantageous for a physical understanding of band structure engineering via the DA growth technique. These investigations and results pave the way for the future utilization of the DA-grown InAs/GaAs short-period superlattices as a promising absorption material choice to extend the photodetector response beyond the cutoff wavelength of random alloy InGaAs.

Direct Evidence of Klein and Anti-Klein Tunneling of Graphitic Electrons in a Corbino Geometry.

Transport measurement of electron optics in monolayer graphene p-n junction devices has been traditionally studied with negative refraction and chiral transmission experiments in Hall bar magnetic focusing setups. We show direct signatures of Klein (monolayer) and anti-Klein (bilayer) tunneling with a circular "edgeless" Corbino geometry made out of gated graphene p-n junctions. Noticeable in particular is the appearance of angular sweet spots (Brewster angles) in the magnetoconductance data of bilayer graphene, which minimizes head-on transmission, contrary to conventional Fresnel optics or monolayer graphene which show instead a sharpened collimation of transmission paths. The local maxima on the bilayer magnetoconductance plots migrate to higher fields with increasing doping density. These experimental results are in good agreement with detailed numerical simulations and analytical predictions.

Comparative analysis of Zn(II)-complexes as model metalloenzymes for mimicking Jack bean urease.

The inhibitory action of Schiff base complexes of 3d metals against the urease enzyme is well explored in the scientific community. However, the ability of such complexes in mimicking active metallobiosites of urease enzymes, possessing ureolytic behavior, still remains unexplored. With this aim firstly, two Zn(II)-complexes (PPR-HMB-Zn and PZ-HMB-Zn) have been developed from two different Schiff base ligands (HL1 = 2-((E)-(2-(piperidin-1-yl)ethylimino)methyl)-5-methylphenol and HL2 = 2-((E)-(2-(piperizin-1-yl)ethylimino)methyl)-5-methylphenol) and structurally characterized using single crystal XRD. The hydrolytic enzymatic activity of both complexes was demonstrated by the gradual increase in the absorption maxima at 425 nm for the formation of the p-nitrophenolate ion from catalytic hydrolysis mediated by the Zn(II) complexes with a disodium salt of p-nitrophenyl phosphate as a model substrate. Associated kinetic parameters, pH dependency and a relevant hydrolysis mechanism have also been explored. After confirming the hydrolytic ability, the complexes were exploited to mimic the hydrolytic activity of Jack bean urease that catalytically hydrolyses urea into ammonia and CO2. The change in the pH of the solution owing to the formation of ammonia under the complex catalysed hydrolytic action of urea has been monitored spectrophotometrically using the pH dependent structural change of phenol red. The amount of ammonia has been quantified using the Nessler's reagent spectrophotometric method. The ureolytic reaction mechanism has been investigated using density functional theory (DFT) calculations using the B3LYP and TPSSH methods for the systematic calculation of the interaction energy. In contrast to PZ-HMB-Zn, PPR-HMB-Zn functions more effectively as a catalyst due to the existence of a lattice-occluded water molecule in its crystal structure and the protonation of the non-terminal N to attract urea by H-bonding, which was further confirmed by AIM analysis.

Phase Change-Induced Magnetic Switching through Metal-Insulator Transition in VO2/TbFeCo Films.

The ability to manipulate spins in magnetic materials is essential in designing spintronics devices. One method for magnetic switching is through strain. In VO2 on TiO2 thin films, while VO2 remains rutile across the metal-insulator transition, the in-plane lattice area expands going from a low-temperature insulating phase to a high-temperature conducting phase. In a VO2/TbFeCo bilayer, the expansion of the VO2 lattice area exerts tension on the amorphous TbFeCo layer. Through the strain effect, magnetic properties, including the magnetic anisotropy and magnetization, of TbFeCo can be changed. In this work, the changes in magnetic properties of TbFeCo on VO2/TiO2(011) are demonstrated using anomalous Hall effect measurements. Across the metal-insulator transition, TbFeCo loses perpendicular magnetic anisotropy, and the magnetization in TbFeCo turns from out-of-plane to in-plane. Using atomistic simulations, we confirm these tunable magnetic properties originating from the metal-insulator transition of VO2. This study provides the groundwork for controlling magnetic properties through a phase transition.

Degradation of CDK9 by Ubiquitin E3 Ligase STUB1 Regulates P-TEFb Level and Its Functions for Global Target Gene Expression within Mammalian Cells.

Positive transcription elongation factor b (P-TEFb) regulates expression of diverse sets of genes within mammalian cells that have implications in several human disease pathogeneses. However, mechanisms of functional regulation of P-TEFb complex through regulation of its stability are poorly known. In this study, we show an important role of C-terminus of Hsc70-interacting protein (CHIP aka STUB1) in regulation of overall level of CDK9 and thus P-TEFb complex within mammalian cells. STUB1 acts as a ubiquitin E3 ligase for proteasomal degradation of CDK9 involving N-terminal lysine 3 (K3) residue. Whereas, overexpression of STUB1 enhances, its knockdown reduces overall CDK9 degradation kinetics within mammalian cells. Interestingly, owing to the same region of binding within CDK9, CyclinT1 protects CDK9 from STUB1-mediated degradation. Factors that cooperatively bind with CyclinT1 to form functional complex also protects CDK9 from degradation by STUB1. Knockdown of STUB1 enhances CDK9 expression and thus P-TEFb complex formation that leads to global increase in RNA polymerase II CTD phosphorylation and transcriptional activation of diverse P-TEFb target genes. Thus, we describe an important functional role of STUB1 in regulation of transcription through modulation of overall level of P-TEFb complex formation within mammalian cells.

Anatomy of nanomagnetic switching at a 3D topological insulator PN junction.

A P-N junction engineered within a Dirac cone system acts as a gate tunable angular filter based on Klein tunneling. For a 3D topological insulator with a substantial bandgap, such a filter can produce a charge-to-spin conversion due to the dual effects of spin-momentum locking and momentum filtering. We analyze how spins filtered at an in-plane topological insulator PN junction (TIPNJ) interact with a nanomagnet, and argue that the intrinsic charge-to-spin conversion does not translate to an external gain if the nanomagnet also acts as the source contact. Regardless of the nanomagnet's position, the spin torque generated on the TIPNJ is limited by its surface current density, which in turn is limited by the bulk bandgap. Using quantum kinetic models, we calculated the spatially varying spin potential and quantified the localization of the current versus the applied bias. Additionally, with the magnetodynamic simulation of a soft magnet, we show that the PN junction can offer a critical gate tunability in the switching probability of the nanomagnet, with potential applications in probabilistic neuromorphic computing.

Fine tuning of the transcription juggernaut: A sweet and sour saga of acetylation and ubiquitination.

Among post-translational modifications of proteins, acetylation, phosphorylation, and ubiquitination are most extensively studied over the last several decades. Owing to their different target residues for modifications, cross-talk between phosphorylation with that of acetylation and ubiquitination is relatively less pronounced. However, since canonical acetylation and ubiquitination happen only on the lysine residues, an overlap of the same lysine residue being targeted for both acetylation and ubiquitination happens quite frequently and thus plays key roles in overall functional regulation predominantly through modulation of protein stability. In this review, we discuss the cross-talk of acetylation and ubiquitination in the regulation of protein stability for the functional regulation of cellular processes with an emphasis on transcriptional regulation. Further, we emphasize our understanding of the functional regulation of Super Elongation Complex (SEC)-mediated transcription, through regulation of stabilization by acetylation, deacetylation and ubiquitination and associated enzymes and its implication in human diseases.

Covalent Organic Framework as a Metal-Free Photocatalyst for Dye Degradation and Radioactive Iodine Adsorption.

Exploring a covalent organic framework (COF) material as an efficient metal-free photocatalyst and as an adsorbent for the removal of pollutants from contaminated water is very challenging in the context of sustainable chemistry. Herein, we report a new porous crystalline COF, C6-TRZ-TPA COF, via segregation of donor-acceptor moieties through the extended Schiff base condensation between tris(4-formylphenyl)amine and 4,4',4″-(1,3,5-triazine-2,4,6-triyl)trianiline. This COF displayed a Brunauer-Emmett-Teller (BET) surface area of 1058 m2 g-1 with a pore volume of 0.73 cc g-1. Again, extended π-conjugation, the presence of heteroatoms throughout the framework, and a narrow band gap of 2.2 eV, all these features collectively work for the environmental remediation in two different perspectives: it could harness solar energy for environmental clean-up, where the COF has been explored as a robust metal-free photocatalyst for wastewater treatment and as an adsorbent for iodine capture. In our endeavor of wastewater treatment, we have conducted the photodegradation of rose bengal (RB) and methylene blue (MB) as model pollutants since these are extremely toxic, are health hazard, and bioaccumulative in nature. The catalyst C6-TRZ-TPA COF showed a very high catalytic efficiency of 99% towards the degradation of 250 parts per million (ppm) of RB solution in 80 min under visible light irradiation with the rate constant of 0.05 min-1. Further, C6-TRZ-TPA COF is found to be an excellent adsorbent as it efficiently adsorbed radioactive iodine from its solution as well as from the vapor phase. The material exhibits a very rapid iodine capturing tendency with an outstanding iodine vapor uptake capacity of 4832 mg g-1.

A Silver-Based Integrated System Showing Mutually Inclusive Super Protonic Conductivity and Photoswitching Behavior.

Photoinduced electricity and proton conductivity led fuel cells have emerged, inter alia, as highly promising systems for unconventional energy harvesting. Notwithstanding their individual presence with widely acclaimed results, an integrating system with mutually inclusive manifestation of both features has hitherto not been reported in the literature. To achieve this objective, our approach was to design a ligand system incorporating prerequisite features of both systems, like extended conjugation instigating photophysical activity and functional groups facilitating ionic conduction. As such, we report herein the design, synthesis, and characterization of a pyridyl-pyrazole-based silver compound that exhibits an excellent photocurrent generation and very high proton conductivity. The X-ray single-crystal structure of the Ag complex fully supports our notion, showing extensive π-π conjugated aromatic rings with a protruding free sulfonic group, facing toward solvent-filled channels with numerous supramolecular interactions. The nanoscopic silver metallogel induces semiconductive features in the system which ultimately result in photoresponse behavior in terms of photocurrent generation with an whopping photocurrent gain (Ion/Ioff) of 21.2. To complete the idea of an integrated system, the proton conductivity values were also measured for both gel and crystalline states, while the former state yields a better result. The maximum proton conductivity value turns out to be 1.03 × 10-2 S cm-1 at 70 °C, which is higher than or comparable to those of well-known systems in the literature for proton conductivity.

New kind of electride sandwich complexes based on the cyclooctatetraene ligand M12(η8-C8H8)2M22 (M1 = Na, K and M2 = Ca, Mg): a theoretical study.

In the present study, the electronic structures of a series of binuclear sandwich complexes based on the cyclooctatetraene ligand M12(η8-C8H8)2M22 (M1 = Na, K and M2 = Ca, Mg) are studied theoretically. Each cyclooctatetraene ligand binds with the metal in the η8 binding mode. The M2-M2 bond length agrees well with the reported bimetallic covalent Ca2 and Mg2 bond lengths. The Wiberg bond index (WBI) also indicates the presence of covalent M2-M2 bonds, which gives additional stability to the complex. A non-nuclear attractor (NNA) is found in-between the M2-M2 bond and the negative Laplacian of the electron density is found at the NNA. Noncovalent interaction (NCI) plot shows that electron density is localized at the M2-M2 bond. Based on the performed analysis, we have concluded that the designed sandwich complexes are electrides. We herein report, for the first time, the electride sandwich complexes of the cyclooctatetraene ligand. Due to the presence of a diffuse electron system, the electride complexes exhibit higher values of the static second hyperpolarizability within the range of 2.6 × 105 to 1.4 × 106 a.u. Among the studied complexes, M12(η8-C8H8)2Ca2 exhibit a higher value of static second hyperpolarizability.

Low Power In-Memory Computation with Reciprocal Ferromagnet/Topological Insulator Heterostructures.

The surface state of a 3D topological insulator (3DTI) is a spin-momentum locked conductive state, whose large spin hall angle can be used for the energy-efficient spin-orbit torque based switching of an overlying ferromagnet (FM). Conversely, the gated switching of the magnetization of a separate FM in or out of the TI surface plane can turn on and off the TI surface current. By exploiting this reciprocal behavior, we can use two FM/3DTI heterostructures to design an integrated 1-transistor 1-magnetic tunnel junction random access memory unit (1T1MTJ RAM) for an ultra low power Processing-in-Memory (PiM) architecture. Our calculation involves combining the Fokker-Planck equation with the Nonequilibrium Green Function (NEGF) based flow of conduction electrons and Landau-Lifshitz-Gilbert (LLG) based dynamics of magnetization. Our combined approach allows us to connect device performance metrics with underlying material parameters, which can guide proposed experimental and fabrication efforts.

ZnAl2O4 Nanomaterial as a Naked-Eye Arsenate Sensor: A Combined Experimental and Computational Mechanistic Approach.

Raising public awareness over the emerging health risk due to intake of arsenic-contaminated potable water is a matter of great concern. Exploration of cost-effective, self-testing kits is a substantial way to reach out to the masses and detect the presence of arsenate in water. With this agenda, a photoluminescent Mannich base Zn(II) complex (ZnMC = [Zn2(ML)2]·(ClO4)2·(H2O); HML = Mannich base ligand) has been synthesized, and its dinuclearity was verified with single-crystal X-ray diffraction structural analysis. Among a range of anions, ZnMC was found to detect arsenate selectively by showing a turn-off emission with a color change from bright green to dark under UV light. The real-life applicability of the ZnMC probe is somewhat restricted to only sensing of arsenate, but not its removal owing to the fact of its homogeneity. Considering the efficacy of ZnMC as well as a need for its easy removal from water, slight modification has been done with chloride ions in the form of ZnMC″ (=[Zn2(ML)2(Cl)2]), and finally, an interface between homogeneous and heterogeneous solid support has been explored with a strategic fabrication of ZnMC″ grafted ZnAl2O4, named as ZAZ nanomaterial. This not only imparts successful segregation of arsenate from drinking water but also provides naked-eye detection under ambient light as well as UV light. Thermodynamic parameters associated with the binding of arsenate to ZnMC and ZAZ have been evaluated through isothermal calorimetric (ITC) measurements. Steady-state and time-resolved fluorescence titration study, absorption titration study, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and computational calculations have been performed to get deep insights into the sensing properties. Proper justification of the sensing mechanism is the highlight of this work. ZAZ nanomaterial has been exploited to produce a self-test paper kit for arsenate detection with a limit of 9.86 ppb, which potentially enables applications in environmental monitoring.

Effect of O-substitution in imidazole based Zn(II) dual fluorescent probes in the light of arsenate detection in potable water: a combined experimental and theoretical approach.

Efficient detection of arsenate (AsO43-) from contaminated drinking water extracted from underground has become a matter of utmost necessity and an exquisite challenge owing to the growing public health issue due to arsenicosis. In order to combat this we planned to detect arsenate with the naked eye under UV light using a novel chemosensor material whose structure and functioning as a sensor could be certified mechanistically. Hence we were encouraged to synthesize two differently O-substituted imidazole based homologous ligands: C1 (HL1 = 2-((E)-(3-(1H-imidazole-1-yl)propylimino)methyl)-6-ethoxyphenol) and C2 (HL2 = 2-((E)-(3-(1H-imidazole-1-yl)propylimino)methyl)-6-methoxyphenol). To accomplish the purposeful exploration of the luminescent sensor, we considered Chelation Enhanced Fluorescence (CHEF) and kept on searching for a metal cation that would be able to turn on the fluorescence of the ligands. Considering Zn(II) as the most suitable candidate, luminescent complexes D1 and D2 ({[Zn2(L1)2(I)2](DMF)} and [Zn2(L2)2(I)2](DMF), respectively) were synthesized and characterized by SXRD, UV-Vis, FT-IR, and photoluminescence spectroscopy. In spite of the resemblance in the solid state structures of D1 and D2, the selective response of D1 towards arsenate with high quenching constants (2.13 × 106), unlike D2, has been demonstrated mechanistically with steady state and time resolved fluorescence titration, solution phase ESI-MS spectral analysis and DFT studies. The selectivity and sensitivity of the sensor D1 explicitly make this material a potent candidate for arsenate detection due to its very low detection limit (8.2 ppb), low cost and user friendly characteristics. Real life implementation of this work in a test strip is expected to prove beneficial for public health to identify arsenate polluted water.

Dehydrogenation of ammonia-borane to functionalize neutral and Li+-encapsulated C60, C70 and C36 fullerene cages: a DFT approach.

Mechanistic investigations into the functionalization of three fullerene cages, viz. C60, C70, and C36 through dehydrogenation of ammonia-borane (AB) have been conducted using Density Functional Theory (DFT). In this process of functionalization, different ring fusions, namely (6-6), (6-5) positions for C60 and C70, and an additional (5-5) for C36 fullerene have been investigated. The optimized geometries of all the complexes and transition states have been characterized using the M06-2X functional in conjunction with the 6-31G(d) basis set. The effect of Li+-encapsulation on the energetics and activation barriers of H2 attachment has also been examined. Although the process of functionalization of neutral fullerenes proceeds extensively through concerted pathways, a step-wise route has been observed for the encapsulated systems. NPA charge analysis and Wiberg bond index (WBI) have been used in order to detect the change in the nature of participating hydrogen atoms and validate the variation in the bond order of the C-C connectivity respectively upon hydrogenation. GCRD parameters have also been calculated to explicate the electronic properties of the hydrogenated products. The (6-6) hydrogenation is observed to be favoured thermodynamically and kinetically for both neutral and Li+-encapsulated C60 and C70, while (5-5) is found to be the most preferred site for C36 systems. Our theoretical exploration suggests that the covalent functionalization of the fullerene cages can be done successfully viaAB resulting in the stabilization of these systems. In short, the present work will provide a general idea about the detailed mechanism related to the functionalization of fullerene cages, which will further motivate researchers in fullerene chemistry.

Theoretical study of gas-phase detoxication of DMMP and DMPT using ammonia-borane and its analogous compound.

The detoxication of DMMP (Dimethyl methylphosphonate) and DMPT (O, S-dimethyl methylphosphonothiolate) via hydrogenation have been investigated computationally employing density functional theory (DFT). In this present study, we aim to explore the direct molecular H2 assisted as well as ammonia-borane (NH3BH3) and 3-methyl-1,2-BN-cyclopentane (denoted as cy-AB) assisted hydrogenation pathways of DMMP and DMPT in order to detoxify them. The detoxication of DMMP has been carried out by successive elimination of two -OMe groups. However, in the case of DMPT, two possibilities have been identified because of two different substituents, -OMe and -SMe. In possibility-I, the elimination of the -OMe group occurs at the beginning, followed by the -SMe group, whereas in possibility-II, the reverse order of elimination occurs for -OMe and -SMe groups. During the detoxication of DMMP using both NH3BH3 and cy-AB as the assisting reagents, the first step has been identified as the rate-determining step (RDS) in which the hydrogens attached to the N- and B-centers of NH3BH3 are transferred to the O-center of PO and P-center, respectively. In harmony with DMMP detoxication, for DMPT also, analyzing the activation barriers, it can be articulated that for both NH3BH3 and cy-AB assisted pathways, both the possibilities are equally feasible as in both the possibilities the common first step is the RDS. Therefore, our computational study is designed to explore the assisting efficiency of NH3BH3 and its cyclic analogue for detoxifying the OPCs.

Interplay between Spin-Orbit Torques and Dzyaloshinskii-Moriya Interactions in Ferrimagnetic Amorphous Alloys.

Ferrimagnetic thin films are attractive for low-power spintronic applications because of their low magnetization, small angular momentum, and fast spin dynamics. Spin orbit torques (SOT) can be applied with proximal heavy metals that also generate interfacial Dzyaloshinskii-Moriya interactions (DMI), which can stabilize ultrasmall skyrmions and enable fast domain wall motion. Here, the properties of a ferrimagnetic CoGd alloy between two heavy metals to increase the SOT efficiency, while maintaining a significant DMI is studied. SOT switching for various capping layers and alloy compositions shows that Pt/CoGd/(W or Ta) films enable more energy-efficient SOT magnetization switching than Pt/CoGd/Ir. Spin-torque ferromagnetic resonance confirms that Pt/CoGd/W has the highest spin-Hall angle of 16.5%, hence SOT efficiency, larger than Pt/CoGd/(Ta or Ir). Density functional theory calculations indicate that CoGd films capped by W or Ta have the largest DMI energy, 0.38 and 0.32 mJ m-2 , respectively. These results show that Pt/CoGd/W is a very promising ferrimagnetic structure to achieve small skyrmions and to move them efficiently with current.

Targeting of GLUT5 for Transporter-Mediated Drug-Delivery Is Contingent upon Substrate Hydrophilicity.

Specific link between high fructose uptake and cancer development and progression highlighted fructose transporters as potential means to achieve GLUT-mediated discrimination between normal and cancer cells. The gained expression of fructose-specific transporter GLUT5 in various cancers offers a possibility for developing cancer-specific imaging and bioactive agents. Herein, we explore the feasibility of delivering a bioactive agent through cancer-relevant fructose-specific transporter GLUT5. We employed specific targeting of GLUT5 by 2,5-anhydro-D-mannitol and investigated several drug conjugates for their ability to induce cancer-specific cytotoxicity. The proof-of-concept analysis was carried out for conjugates of chlorambucil (CLB) in GLUT5-positive breast cancer cells and normal breast cells. The cytotoxicity of conjugates was assessed over 24 h and 48 h, and significant dependence between cancer-selectivity and conjugate size was observed. The differences were found to relate to the loss of GLUT5-mediated uptake upon increased conjugate size and hydrophobicity. The findings provide information on the substrate tolerance of GLUT5 and highlight the importance of maintaining appropriate hydrophilicity for GLUT-mediated delivery.

Identification, characterization and control of a sequence variant in monoclonal antibody drug product: a case study.

Sequence variants (SV) in protein bio therapeutics can be categorized as unwanted impurities and may raise serious concerns in efficacy and safety of the product. Early detection of specific sequence modifications, that can result in altered physicochemical and or biological properties, is therefore desirable in product manufacturing. Because of their low abundance, and finite resolving power of conventional analytical techniques, they are often overlooked in early drug development. Here, we present a case study where trace amount of a sequence variant is identified in a monoclonal antibody (mAb) based therapeutic protein by LC-MS/MS and the structural and functional features of the SV containing mAb is assessed using appropriate analytical techniques. Further, a very sensitive selected reaction monitoring (SRM) technique is developed to quantify the SV which revealed both prominent and inconspicuous nature of the variant in process chromatography. We present the extensive characterization of a sequence variant in protein biopharmaceutical and first report on control of sequence variants to < 0.05% in final drug product by utilizing SRM based mass spectrometry method during the purification steps.

Pyridine-pyrazole based Al(iii) 'turn on' sensor for MCF7 cancer cell imaging and detection of picric acid.

We report herein the development of a new pyridine-pyrazole based bis-bidentate asymmetric chemosensor that shows excellent turn-on chelation-enhanced Al3+-responsive fluorescence. The presence of two 'hard' phenolic hydroxyl groups plays a pivotal role in switching-on the sensing through coordination to the 'hard' Al3+ ion, while the mechanism can be interpreted by the chelation-enhanced fluorescence (CHEF) process. The X-ray single structure show a planar conjugated structure of the ligand, which was further stabilized by extensive H-bonding and π-π stacking. The photophysical studies related to the sensing behavior of the titular ligand toward aluminum was investigated in detail using various spectroscopic techniques like UV-Vis, photoluminescence, fluorescence and time-correlated single-photon count (TCSPC) and time-resolved NMR. The spectroscopic methods also confirm the selective detection of Al3+ ion in the presence of other metal ions. The theoretical calculations using Density Functional Theory (DFT) and the Time Dependent Density Functional Theory (TD-DFT) provide further insight on the mechanistic aspects of the turn-on sensing behavior including the electronic spectra of both the ligand and the complex. Interestingly, the as-synthesized H2DPC-Al complex can also be utilized as a fluorescence-based sensor for various nitroaromatics including picric acid, for which an INHIBIT logic gate can also be constructed. The as synthesized complex was subsequently used as a fluorescent probe for imaging of human breast adenocarcinoma (MCF7) cells using live cell confocal microscopic techniques.