Constant-current corona triode adapted and optimized for the characterization of thin dielectric films.

This work describes an enhanced corona triode with constant current adapted to characterize the electrical properties of thin dielectric films used in organic electronic devices. A metallic grid with a high ionic transparency is employed to charge thin films (100 s of nm thick) with a large enough charging current. The determination of the surface potential is based on the grid voltage measurement, but using a more sophisticated procedure than the previous corona triode. Controlling the charging current to zero, which is the open-circuit condition, the potential decay can be measured without using a vibrating grid. In addition, the electric capacitance and the characteristic curves of current versus the stationary surface potential can also be determined. To demonstrate the use of the constant current corona triode, we have characterized poly(methyl methacrylate) thin films with films with thicknesses in the range from 300 to 500 nm, frequently used as gate dielectric in organic field-effect transistors.

Measurement of the electro-optic coefficient during the photoelectric-field assisted poling using a Mach-Zehnder interferometer.

This work describes the experimental apparatus based on the Mach-Zehnder interferometer for measuring the electro-optic coefficient during and after the photo-assisted poling process using a continuous light excitation. We also show that the poling can be performed at cryogenic temperatures. The setup is based on the superposition of a Mach-Zehnder AC modulation voltage on the DC bias voltage required to promote the chromophore orientation during light excitation. The effect of the reversible polarization due to the DC bias voltage applied to the polymer film is considered to calculate the electro-optic coefficient during the photo-assisted poling process. The usefulness of our setup is demonstrated with three polymer films, with different electro-optic activities: guest-host, copolymer, and homopolymer, all based on methyl methacrylate monomers and containing disperse red-1 chromophores.

Impedance e-tongue instrument for rapid liquid assessment.

We present a compact and easy to handle instrument developed to perform rapid analysis of liquids utilizing an "electronic tongue" system. Briefly, the e-tongue used here is based on impedance measurements of an array of sensing units fabricated with ultrathin films of different materials deposited onto gold interdigitated electrodes. The instrument has the capability of measuring up to eight different sensor sets, each comprising an array of eight sensing units, and can perform a series of measurements in less than half of an hour. Additionally, there is a user-friendly software interface for instrument control, allowing the statistical correlation of samples using principal component analysis.

Light emitting diodes containing Langmuir-Blodgett films of copolymer of a poly(p-phenylene-vinylene) derivative and poly(octaneoxide).

The properties of Langmuir and Langmuir-Blodgett (LB) films from a block copolymer with polyethylene oxide and phenylene-vinylene moieties are reported. The LB films were successfully transferred onto several types of substrates, with sufficient quality to allow for evaporation of a metallic electrode on top of the LB films to produce polymer light emitting diodes (PLEDs). The photoluminescence and electroluminescence spectra of the LB film and device were similar, featuring an emission at ca. 475 nm, from which we could infer that the emission mechanisms are essentially the same as in poly(p-phenylene) derivatives. Analogously to other PLEDs the current versus voltage characteristics of the LB-based device could be explained with the Arkhipov model according to which charge transport occurs among localized sites. The implications for nanotechnology of the level of control that may be achieved with LB devices will also be discussed.

Fast dynamics in the optical storage with Langmuir-Blodgett films of a diazocrown ether molecule.

Azobenzene-containing molecules have been studied for a number of applications exploiting the efficient trans-cis-trans photoisomerization cycles, which lead to molecular alignment and even micrometer-scale mass transport. One of the limitations of these materials, though, is the slow dynamics of the alignment process that requires significant molecular rearrangement. In this paper, we report on Langmuir-Blodgett (LB) films of a derivative of azocrown ether, referred to as 29-membered diazocrown ether, specially synthesized for the photoisomerization to involve only distortion of the shape of the crown. As a result, the dynamics of the writing process was extremely fast, with maximum birefringence being reached within less than 1 s, to be contrasted with tens or even hundreds of seconds for other azobenzene materials. A disadvantage is this strategy, however, is that the resulting birefringence was low, of the order of 10(-3), because the closely packed arrangement prevented the whole diazocrown molecule to be fully reoriented. From a comparison with results obtained in guest-host, cast films where the 29-membered diazocrown ether was incorporated into a polystyrene matrix, we confirmed that both fast dynamics and small birefringence features are due to a combination of effects from the nanostructured nature of the LB films and the molecular structure of the specially-designed diazocrown ether. Significantly, the fast dynamics opens the way for various applications, as in command surfaces for liquid crystal devices.

Study of the growth process of in situ polyaniline deposited films.

Polyaniline (PAni) thin films were deposited onto BK7 glass substrates using the in situ deposition technique. The control of the time and the aniline concentration in the PAni polymerization reaction on the film deposition allowed us to prepare films with different thickness, down to approximately 25 nm. The film growth process was monitored by measuring the UV-vis spectra and the AFM height profiles of the film surface. The curves of adsorption kinetics were analyzed with the Avrami's model, yielding an exponent n=3, thus indicating nucleation of spheroids at the initial stages of polymerization that grow through a diffusion process. AFM images of the surface height profiles corroborate this hypothesis, with spheroids growing with no preferred orientation during the in situ deposition.

Dimensões geométricas das fibras do músculo sóleo de ratos exercitados em esteira rolante: a importância da análise por meio de imagens digitalizadas / Geographical dimensions of fibers from the soleum muscle in rats exercised on treadmill: the importance of the analysis by means of digitalized images

O objetivo deste trabalho foi avaliar uma nova metodologia para análise de imagens digitalizadas de cortes transversais de fibras musculares esqueléticas de ratos submetidos ao exercício físico em esteira rolante. Foram utilizados segmentos do músculo sóleo de ratos obtidos de cortes histológicos e corados com hematoxilina e eosina (HE). Foram avaliadas 100 fibras musculares para cada animal e medidos o perímetro, a área e os diâmetros máximo, médio e mínimo por meio do processo de segmentação de imagens digitalizadas das seções das fibras usando o programa computacional Image-Pro-Plus. As dimensões geométricas como a área, perímetro e os diâmetros mínimos, médios das seções transversais das fibras musculares revelaram-se adequados para a análise do efeito do treinamento dos ratos. A análise revelou a existência de interação entre os grupos de ratos e a duração do exercício físico. O coeficiente de correlação de Pearson foi maior entre diâmetro médio e a área das fibras (0,97) seguida pela correlação entre os diâmetros máximo e médio com o perímetro (0,93). Concluiu-se que a mensuração do grau de hipertrofia das fibras musculares pode ser feita através da determinação do diâmetro médio ou da área da seção transversal da fibra, constituindo uma metodologia adequada e eficiente especialmente para as fibras musculares com acentuado polimorfismo.

The purpose of this paper was to assess a new methodology to analyze digitalized cross sectional images from the skeletal muscular fibers in rats submitted to physical exercise on treadmill. It was used portions of the soleum muscle of rats attained from histological cuts and tinted with hematoxylin and eosin (HE). 100 muscular fibers were assessed from each animal, and their perimeter, the area, and the maximal, medium and minimal diameters were measured by means of the segmentation process from digitalized images of the fibers' sections using the software Image-Pro Plus. The geometrical dimensions such as the area, the perimeter and the medium and minimal diameters of the cross section of muscular fibers revealed to be adequate to analyze the effect of the training in rats. The analysis revealed the existence of an interaction between the group of rats and the duration of the physical exercise. The Pearson's correlation coefficient was higher between the medium diameter and the area of the fibers (0.97), followed by the correlation between the maximal and medium diameter with the perimeter (0.93). It can be concluded that the measurement of the grade of the hypertrophy of the muscular fibers can be performed by determining the medium diameter or the cross sectional area of the fiber, and thus constituting an adequate and effective methodology especially for muscular fibers with accentuated polymorphism.

El objetivo de este trabajo era evaluar una nueva metodología para el análisis digitalizado de las imágenes de cortes transversales de fibras musculares esqueléticas de ratones sometidos al ejercicio físico en la cinta rodante. Los segmentos del músculo sóleo de ratones obtenidos por cortes histológicos y fueron coloreados con Hematoxilina y Eosina (ÉL). Se estimaron 100 fibras musculares para cada animal, y se midión el perímetro moderado, el área, y el máximo de los diámetros, medio y mínimo a través del proceso de segmentación de digitalizacións de las imágenes de las secciones de las fibras usando un programa computarizado Image Pro-Plus. Las dimensiones geométricas como el perímetro área y los diámetros mínimos, medio de las secciones atravesado de las fibras musculares que ellos se revelaron apropiado para el análisis del efecto del entrenamiento de los ratones. El análisis reveló la existencia de la interacción entre los grupos de ratones y la duración del ejercicio físico. El coeficiente de correlación de Pearson era más grande entre el diámetro elemento y el área de las fibras (0,97) siguiendo para la correlación entre el máximo de los diámetros y medio con el perímetro (0,93). fue Acabado que pueden hacerse las medidas del grado de hipertrofia de las fibras musculares a través de la determinación del diámetro elemento o del área de la sección atravesado de la fibra, constituyendo una metodología apropiada y eficaz sobre todo para las fibras musculares con haber acentuado el polimorfismo.

Interaction of small amounts of bovine serum albumin with phospholipid monolayers investigated by surface pressure and atomic force microscopy.

The influence of small amounts of bovine serum albumin (BSA) (nM concentration) on the lateral organization of phospholipid monolayers at the air-water interface and transferred onto solid substrates as one-layer Langmuir-Blodgett (LB) films was investigated. The kinetics of adsorption of BSA onto the phospholipid monolayers was monitored with surface pressure isotherms in a Langmuir trough, for the zwitterionic dipalmitoylphosphatidyl ethanolamine (N,N-dimethyl-PE) and the anionic dimyristoylphosphatidic acid (DMPA). A monolayer of N,N-dimethyl-PE or DMPA incorporating BSA was transferred onto a solid substrate using the Langmuir-Blodgett technique. Atomic force microscopy (AFM) images of one-layer LB films displayed protein-phospholipid domains, whose morphology was characterized using dynamic scaling theories to calculate roughness exponents. For DMPA-BSA films the surface is characteristic of self-affine fractals, which may be described with the Kardar-Parisi-Zhang (KPZ) equation. On the other hand, for N,N-dimethyl-PE-BSA films, the results indicate a relatively flat surface within the globule. The height profile and the number and size of globules varied with the type of phospholipid. The overall results, from kinetics of adsorption on Langmuir monolayers and surface morphology in LB films, could be interpreted in terms of the higher affinity of BSA to the anionic DMPA than to the zwitterionic N,N-dimethyl-PE. Furthermore, the effects from such small amounts of BSA in the monolayer point to a cooperative response of DMPA and N,N-dimethyl-PE monolayers to the protein.

Morphology characterization of layer-by-layer films from PAH/MA-co-DR13: the role of film thickness.

We report on the use of dynamic scale theory and fractal analyses in the study of distinct growth stages of layer-by-layer (LBL) films of poly(allylamine hydrochloride) (PAH) and a side-chain-substituted azobenzene copolymer (Ma-co-DR13). The LBL films were adsorbed on glass substrates and characterized with atomic force microscopy with the Ma-co-DR13 at the top layer. The granular morphology exhibited by the films allowed the observation of the growth process inside and outside the grains. The growth outside the grains was found to follow the Kardar-Parisi-Zhang model, with fractal dimensions of ca. 2.6. One could expect that inside the grains the morphology would be close to a Euclidian surface with fractal dimension of ca. 2 for any growth stage. The latter, however, was observed only for thicker films containing more than 10 bilayers. For thinner films the morphology was well described by a self-affine fractal. Such dependence of the growth behavior with the film thickness is associated with a more complete coverage of adsorption sites in thicker films due to diffusion of polymer molecules.

Dynamic scale theory for characterizing surface morphology of layer-by-layer films of poly(o-methoxyaniline).

The dynamic scale theory and fractal concepts are employed in the characterization of surface morphological properties of layer-by-layer (LBL) films from poly(o-methoxyaniline) (POMA) alternated with poly(vinyl sulfonic acid) (PVS). The fractal dimensions are found to depend on the procedures to fabricate the POMA/PVS multilayers, particularly with regard to the drying procedures. LBL films obtained via drying in ambient air show a more homogeneous surface, compared to films dried under vacuum or a flow of nitrogen, due to a uniform rearrangement of polymer molecules during solvent evaporation.