A compound eye-like morphology formed through hexagonal array of hemispherical microparticles where an alkyl-fullerene derivative self-assembled at atmosphere-sealed air/water interface.

Self-assembly processes are widely used in nature to form hierarchically organized structures, prompting us to investigate such processes at the macroscopic scale. We report an unprecedented approach toward the self-assembly of alkyl-fullerene (C60) derivatives into a hexagonal array of hemispherical microparticles akin to the morphology of a compound eye. The method includes casting solvated alkyl-C60compound on an air/water interface followed by controlled evaporation of the solvent under atmosphere-sealed conditions. This leads to the formation of a thin film floating on water with a diameter of up to 1.3 centimeters and exhibiting a hexagonally-packed hemispherical structure with a diameter of approximately 38µm. Various measurements of the formed film reveal that amorphousness is necessary for suppressing uncontrollable crystallization, which affects the microparticle size and film formation mechanism. We tested the feasibility of this approach for the self-assembly of a relatively common C60derivative, [6,6]-phenyl-C61-butyric acid methyl ester (PC61BM), resulting in the formation of a film with a similar pattern of hexagonally-packed larger microparticles approximately 152µm in size of diameter.

Supramolecular Large Nanosheets Assembled at Air/Water Interfaces and in Solution from Amphiphilic Heptagon-Containing Nanographenes.

We report the synthesis of a new set of amphiphilic saddle-shaped heptagon-containing polycyclic aromatic hydrocarbons (PAHs) functionalized with tetraethylene glycol chains and their self-assembly into large two-dimensional (2D) polymers. An in-depth analysis of the self-assembly mechanism at the air/water interface has been carried out, and the proposed arrangement models are in good agreement with the molecular dynamics simulations. Quite remarkably, the number and disposition of the tetraethylene glycol chains significantly influence the disposition of the PAHs at the interface and conditionate their packing under pressure. For the three compounds studied, we observed three different behaviors in which the aromatic core is parallel, perpendicular, and tilted with respect to the water surface. We also show that these curved PAHs are able to self-assemble in solution into remarkably large sheets of up to 150 µm2. These results show the relationship, within a family of curved nanographenes, between the monomer configuration and their self-assembly capacity in air/water interfaces and organic-water mixtures.

Human Hemoglobin-Based Zinc-Air Battery in a Neutral Electrolyte.

The use of human hemoglobin (Hb) as a catalytic component of the air electrode in a primary zinc-air battery with a neutral electrolyte has been investigated. Three different electrode modifications, using the drop-casting method, with Hb and Nafion were first tested in a three-electrode cell, obtaining the best oxygen electroreduction (ORR) performance and long-term stability with a Hb plus Nafion (Hb-Nafion)-modified electrode. The latter Hb-Nafion-based air electrode provided a higher specific capacity and discharge time than the opposite order (Nafion-Hb).

Amphiphilic polymers for aggregation-induced emission at air/liquid interfaces.

Polymersomes and related self-assembled nanostructures displaying Aggregation-Induced Emission (AIE) are highly relevant for plenty of applications in imaging, biology and functional devices. Experimentally simple, scalable and universal strategies for on-demand self-assembly of polymers rendering well-defined nanostructures are highly desirable. A purposefully designed combination of amphiphilic block copolymers including tunable lengths of hydrophilic polyethylene glycol (PEGm) and hydrophobic AIE polymer poly(tetraphenylethylene-trimethylenecarbonate) (P(TPE-TMC)n) has been studied at the air/liquid interface. The unique 2D assembly properties have been analyzed by thermodynamic measurements, UV-vis reflection spectroscopy and photoluminescence in combination with molecular dynamics simulations. The (PEG)m-b-P(TPE-TMC)n monolayers formed tunable 2D nanostructures self-assembled on demand by adjusting the available surface area. Tuning of the PEG length allows to modification of the area per polymer molecule at the air/liquid interface. Molecular detail on the arrangement of the polymer molecules and relevant molecular interactions has been convincingly described. AIE fluorescence at the air/liquid interface has been successfully achieved by the (PEG)m-b-P(TPE-TMC)n nanostructures. An experimentally simple 2D to 3D transition allowed to obtain 3D polymersomes in solution. This work suggests that engineered amphiphilic polymers for AIE may be suitable for selective 2D and 3D self-assembly for imaging and technological applications.

Mechanochemically Synthetized PAN-Based Co-N-Doped Carbon Materials as Electrocatalyst for Oxygen Evolution Reaction.

We report a new class of polyacrylonitrile (PAN)-based Co-N-doped carbon materials that can act as suitable catalyst for oxygen evolution reactions (OER). Different Co loadings were mechanochemically added into post-consumed PAN fibers. Subsequently, the samples were treated at 300 °C under air (PAN-A) or nitrogen (PAN-N) atmosphere to promote simultaneously the Co3O4 species and PAN cyclization. The resulting electrocatalysts were fully characterized and analyzed by X-ray diffraction (XRD) and photoelectron spectroscopy (XPS), transmission (TEM) and scanning electron (SEM) microscopies, as well as nitrogen porosimetry. The catalytic performance of the Co-N-doped carbon nanomaterials were tested for OER in alkaline environments. Cobalt-doped PAN-A samples showed worse OER electrocatalytic performance than their homologous PAN-N ones. The PAN-N/3% Co catalyst exhibited the lowest OER overpotential (460 mV) among all the Co-N-doped carbon nanocomposites, reaching 10 mA/cm2. This work provides in-depth insights on the electrocatalytic performance of metal-doped carbon nanomaterials for OER.

Folding and self-assembly of short intrinsically disordered peptides and protein regions.

Proteins and peptide fragments are highly relevant building blocks in self-assembly for nanostructures with plenty of applications. Intrinsically disordered proteins (IDPs) and protein regions (IDRs) are defined by the absence of a well-defined secondary structure, yet IDPs/IDRs show a significant biological activity. Experimental techniques and computational modelling procedures for the characterization of IDPs/IDRs are discussed. Directed self-assembly of IDPs/IDRs allows reaching a large variety of nanostructures. Hybrid materials based on the derivatives of IDPs/IDRs show a promising performance as alternative biocides and nanodrugs. Cell mimicking, in vivo compartmentalization, and bone regeneration are demonstrated for IDPs/IDRs in biotechnological applications. The exciting possibilities of IDPs/IDRs in nanotechnology with relevant biological applications are shown.

Biomineralization at fluid interfaces.

Biomineralization is of paramount importance for life on Earth. The delicate balance of physicochemical interactions at the interface between organic and inorganic matter during all stages of biomineralization resembles an extremely high complexity. The coordination of this sophisticated biological machinery and physicochemical scenarios is certainly a wonderful show of nature. Understanding of the biomineralization processes is still far from complete. The recent advances in biomineralization research from the Colloid and Interface Science perspective are reviewed herein. The synergy between this two fields of research is demonstrated. The unique opportunities offered by purposefully designed fluid interfaces, mainly Langmuir monolayers are presented. Biomedical applications of biomineral-based nanostructures are discussed, showing their improved biocompatibility and on-demand delivery features. A brief guide to the array of state-of-the-art experimental techniques for unraveling the mechanisms of biomineralization using fluid interfaces is included. In summary, the fruitful and exciting crossroad between Colloid and Interface Science with Biomineralization is exhibited.

Thermal and light irradiation effects on the electrocatalytic performance of hemoglobin modified Co3O4-g-C3N4 nanomaterials for the oxygen evolution reaction.

The oxygen evolution reaction (OER) plays a key role in the water splitting process and a high energy conversion efficiency is essential for the definitive advance of hydrogen-based technologies. Unfortunately, the green and sustainable development of electrocatalysts for water oxidation is nowadays a real challenge. Herein, a successful mechanochemical method is proposed for the synthesis of a novel hemoglobin (Hb) modified Co3O4/g-C3N4 composite nanomaterial. The controlled incorporation of cobalt entities as well as Hb functionalization, without affecting the g-C3N4 nanoarchitecture, was evaluated using different physicochemical techniques, such as X-ray diffraction, N2-physisorption, scanning electron microscopy, UV-visible spectroscopy and X-ray photoelectron spectroscopy. The beneficial effect of the resulting ternary bioconjugate together with the influence of the temperature and light irradiation was investigated by electrochemical analysis. At 60 °C and under light exposition, this electrocatalyst requires an overpotential of 370 mV to deliver a current density of 10 mA·cm-2, showing a Tafel slope of 66 mV·dec-1 and outstanding long-term stability for 600 OER cycles. This work paves a way for the controlled fabrication of multidimensional and multifunctional bio-electrocatalysts.

Prediction of paclitaxel pharmacokinetic based on in vitro studies: Interaction with membrane models and human serum albumin.

Interactions of paclitaxel (PTX) with models mimicking biological interfaces (lipid membranes and serum albumin, HSA) were investigated to test the hypothesis that the set of in vitro assays proposed can be used to predict some aspects of drug pharmacokinetics (PK). PTX membrane partitioning was studied by derivative spectrophotometry; PTX effect on membrane biophysics was evaluated by dynamic light scattering, fluorescence anisotropy, atomic force microscopy and synchrotron small/wide-angle X-ray scattering; PTX distribution/molecular orientation in membranes was assessed by steady-state/time-resolved fluorescence and computer simulations. PTX binding to HSA was studied by fluorescence quenching, derivative spectrophotometry and dynamic/electrophoretic light scattering. PTX high membrane partitioning is consistent with its efficacy crossing cellular membranes and its off-target distribution. PTX is closely located in the membrane phospholipids headgroups, also interacting with the hydrophobic chains, and causes a major distortion of the alignment of the membrane phospholipids, which, together with its fluidizing effect, justifies some of its cellular toxic effects. PTX binds strongly to HSA, which is consistent with its reduced distribution in target tissues and toxicity by bioaccumulation. In conclusion, the described set of biomimetic models and techniques has the potential for early prediction of PK issues, alerting for the required drug optimizations, potentially minimizing the number of animal tests used in the drug development process.

Bioconjugated Plasmonic Nanoparticles for Enhanced Skin Penetration.

Plasmonic nanoparticles (NPs) are one of the most promising and studied inorganic nanomaterials for different biomedical applications. Plasmonic NPs have excellent biocompatibility, long-term stability against physical and chemical degradation, relevant optical properties, well-known synthesis methods and tuneable surface functionalities. Herein, we review recently reported bioconjugated plasmonic NPs using different chemical approaches and loading cargoes (such as drugs, genes, and proteins) for enhancement of transdermal delivery across biological tissues. The main aim is to understand the interaction of the complex skin structure with biomimetic plasmonic NPs. This knowledge is not only important in enhancing transdermal delivery of pharmaceutical formulations but also for controlling undesired skin penetration of industrial products, such as cosmetics, sunscreen formulations and any other mass-usage consumable that contains plasmonic NPs.

Boosting the electrochemical oxygen reduction activity of hemoglobin on fructose@graphene-oxide nanoplatforms.

A metal-free oxygen reduction reaction (ORR) electrocatalyst with outstanding performance was obtained through an easy and one-pot synthesis of hemoglobin functionalized fructose@graphene-oxide (GO) nanocomposites. The active pyridinic nitrogen sites of the highly unfolded proteins together with the excellent electronic properties of GO appears to be the main factors causing the improved electrocatalytic activity.

Optimization of Amino Acid Sequence of Fmoc-Dipeptides for Interaction with Lipid Membranes.

Fmoc-dipeptides appear as highly relevant building blocks in smart hydrogels and nanovehicles for biological applications. The interactions of the Fmoc-dipeptides with the cell membrane determine the efficiency of the nanomaterials based on the Fmoc-dipeptides' internalization of nanovehicles for drug delivery. Here, we aim to understand the interplay of the interactions between the Fmoc-dipeptides and a phospholipid surface as a function of the amino acid sequence. The DMPA (1,2-dimyristoyl- sn-glycero-3-phosphate) phospholipid in Langmuir monolayers was used as a model cell surface. A set of seven derivatives of Fmoc-dipeptides with a broad range of hydrophobicity were included. Mixed monolayers composed of DMPA/Fmoc-dipeptides in an equimolar ratio were built and characterized in situ at the air/water interface. Surface pressure-molecular area isotherms (π- A), Brewster angle microscopy (BAM), and UV-vis reflection spectroscopy (Δ R) were combined to provide a holistic picture of the interactions of the Fmoc-dipeptide with the phospholipid molecules. An increase in the hydrophobicity led to enhanced interaction of the Fmoc-dipeptide and DMPA molecules. The compression of the mixed monolayer could displace a significant fraction of the Fmoc-dipeptide from the monolayer. High hydrophobicity promoted self-assembly of the Fmoc-dipeptides over interaction with the phospholipid surface. The interplay of these two phenomena was analyzed as a function of the amino acid sequence of the Fmoc-dipeptides. The toxicity effect of Fmoc-FF could be observed and detailed at the molecular level. This study suggests that the adjustment of the hydrophobicity of the Fmoc-dipeptides within a defined range might optimize their efficiency for interaction with the lipid membranes. A semiquantitative guide for the chemical design of Fmoc-dipeptides for biological applications is proposed herein.

Mimicking the bioelectrocatalytic function of recombinant CotA laccase through electrostatically self-assembled bioconjugates.

Unprecedented 3D nanobiosystems composed of recombinant CotA laccases and citrate-stabilised gold nanoparticles have been successfully achieved by an electrostatic self-assembly strategy. The bioelectrochemical reduction of O2 driven by CotA laccase at the spore coat was mimicked. Consequently key insights into its bioelectrocatalytic function were unravelled.

Fluorinated CdSe/ZnS quantum dots: Interactions with cell membrane.

Fluorescent inorganic quantum dots are highly promising for biomedical applications as sensing and imaging agents. However, the low internalization of the quantum dots, as well as for most of the nanoparticles, by living cells is a critical issue which should be solved for success in translational research. In order to increase the internalization rate of inorganic CdSe/ZnS quantum dots, they were functionalized with a fluorinated organic ligand. The fluorinated quantum dots displayed an enhanced surface activity, leading to a significant cell uptake as demonstrated by in vitro experiments with HeLa cells. We combined the experimental and computational results of Langmuir monolayers of the DPPC phospholipid as a model cell membrane with in vitro experiments for analyzing the mechanism of internalization of the fluorinated CdSe/ZnS quantum dots. Surface pressure-molecular area isotherms suggested that the physical state of the DPPC molecules was greatly affected by the quantum dots. UV-vis reflection spectroscopy and Brewster Angle Microscopy as in situ experimental techniques further confirmed the significant surface concentration of quantum dots. The disruption of the ordering of the DPPC molecules was assessed. Computer simulations offered detailed insights in the interaction between the quantum dots and the phospholipid, pointing to a significant modification of the physical state of the hydrophobic region of the phospholipid molecules. This phenomenon appeared as the most relevant step in the internalization mechanism of the fluorinated quantum dots by cells. Thus, this work sheds light on the role of fluorine on the surface of inorganic nanoparticles for enhancing their cellular uptake.

Surface-Active Fluorinated Quantum Dots for Enhanced Cellular Uptake.

Fluorescent nanoparticles, such as quantum dots, hold great potential for biomedical applications, mainly sensing and bioimaging. However, the inefficient cell uptake of some nanoparticles hampers their application in clinical practice. Here, the effect of the modification of the quantum dot surface with fluorinated ligands to increase their surface activity and, thus, enhance their cellular uptake was explored.

Subtle chemical modification for enrichment of Fmoc-amino acid at a phospholipid interface.

Amino acids including the Fmoc group (9-fluorenylmethyloxycarbonyl) are bioinspired molecules that display intriguing features in self-assembly and biological applications. The influence of a delicate chemical modification between Fmoc-F and Fmoc-Y on the interaction with a phospholipid surface was analyzed. Langmuir monolayers of the 1,2-dimyristoyl-sn-glycero-3-phosphate (DMPA) phospholipid were used to mimic the eukaryotic cell membrane. In situ Brewster angle microscopy and UV-vis reflection spectroscopy provided insights on the effect of the Fmoc-amino acid derivatives on the DMPA phospholipid. The formation of H-bonds between the Fmoc-Y and the DMPA molecules was assessed, demonstrating the crucial role of the hydroxyl group of Fmoc-Y in enhancing the interaction with biosurfaces.

Unravelling the 2D self-assembly of Fmoc-dipeptides at fluid interfaces.

Dipeptides self-assemble into supramolecular structures showing plenty of applications in the nanotechnology and biomedical fields. A set of Fmoc-dipeptides with different aminoacid sequences has been synthesized and their self-assembly at fluid interfaces has been assessed. The relevant molecular parameters for achieving an efficient 2D self-assembly process have been established. The self-assembled nanostructures of Fmoc-dipeptides displayed significant chirality and retained the chemical functionality of the aminoacids. The impact of the sequence on the final supramolecular structure has been evaluated in detail using in situ characterization techniques at air/water interfaces. This study provides a general route for the 2D self-assembly of Fmoc-dipeptides.

Organization and structure of mixed Langmuir films composed of polydiacetylene and hemicyanine.

Mixed Langmuir monolayers of 10,12-Pentacosadiynoic acid (DA) monomer and an amphiphilic Hemicyanine dye derivative have been formed at the air/water interface. Two derivatives of docosylpyridinium have been used, with either one included in the monolayer in 1:1molar ratio. The DA monomers within the mixed monolayers have been polymerized in situ at the air/water interface. The crystalline structure of the monolayer and the kinetics of polymerization have been probed by grazing incidence X-ray diffraction (GIXD). The polymerization of DA proceeds with no phase segregation, exclusively leading to the red polydiacetylene form. The kinetics of polymerization at the air/water interface has been monitored in situ by GIXD. The experimental results have been combined with Molecular Mechanics computer simulations, revealing that DA molecules are sequentially arranged with molecules of Hemicyanine dye in alternating rows. The hydrophobic chains of the dye molecules act as spacers between the DA monomers. Surprisingly, such molecular arrangement does not hinder the in situ photopolymerization of DA. The mechanism of polymerization of DA within the mixed Langmuir monolayers has been convincingly described in molecular detail. This approach for interfacial polymerization of DA holds great potential for optically active devices and nanostructures comprising self-assembled thin films based in polydiacetylene.

Directed self-assembly of inorganic nanoparticles at air/liquid interfaces.

Inorganic nanoparticles (NPs) appear as the forefront functional structure in nanotechnology. The preparation of functional materials based on inorganic NPs requires their assembly onto well-defined structures. Within this context, self-assembly at air-liquid interfaces is probably the best candidate for a universal procedure for active materials composed of assembled NPs. The detailed in situ mechanism of the lateral self-assembly and vertical organization of NPs at air-liquid interfaces is still unknown despite its extended use. The most common and promising methods for addressing this open issue are reviewed herein. The self-assembled films can be used in situ or further be transferred to solid substrates as the main constituents of novel functional materials. Plasmonic NPs at interfaces are highly interesting, given the broad range of applications of the plasmonic field, and will be discussed more in detail.

Interfacial Activity of Gold Nanoparticles Coated with a Polymeric Patchy Shell and the Role of Spreading Agents.

Gold patchy nanoparticles (PPs) were prepared under surfactant-free conditions by functionalization with a binary ligand mixture of polystyrene and poly(ethylene glycol) (PEG) as hydrophobic and hydrophilic ligands, respectively. The interfacial activity of PPs was compared to that of homogeneous hydrophilic nanoparticles (HPs), fully functionalized with PEG, by means of pendant drop tensiometry at water/air and water/decane interfaces. We compared interfacial activities in three different spreading agents: water, water/chloroform, and pure chloroform. We found that the interfacial activity of PPs was close to zero (∼2 mN/m) when the spreading agent was water and increased to ∼14 mN/m when the spreading agent was water/chloroform. When the nanoparticles were deposited with pure chloroform, the interfacial activity reached up to 60 mN/m by compression. In all cases, PPs exhibited higher interfacial activity than HPs, which were not interfacially active, regardless of the spreading agent. The interfacial activity at the water/decane interface was found to be significantly lower than that at the water/air interface because PPs aggregate in decane. Interfacial dilatational rheology showed that PPs form a stronger elastic shell at the pendant drop interface, compared to HPs. The significantly high interfacial activity obtained with PPs in this study highlights the importance of the polymeric patchy shell and the spreading agent.