Betulin Stimulates Osteogenic Differentiation of Human Osteoblasts-Loaded Alginate-Gelatin Microbeads.

Osteoporosis, a terminal illness, has emerged as a global public health problem in recent years. The long-term use of bone anabolic drugs to treat osteoporosis causes multi-morbidity in elderly patients. Alternative therapies, such as allogenic and autogenic tissue grafts, face important issues, such as a limited source of allogenic grafts and tissue rejection in autogenic grafts. However, stem cell therapy has been shown to increase bone regeneration and decrease osteoporotic bone formation. Stem cell therapy combined with betulin (BET) supplementation might be adequate for bone remodeling and new bone tissue generation. In this study, the effect of BET on the viability and osteogenic differentiation of hFOB 1.19 cells was investigated. The cells were encapsulated in alginate-gelatin (AlGel) microbeads. In vitro tests were conducted during the 12 d of incubation. While BET showed cytotoxic activity (>1 µM) toward non-encapsulated hFOB 1.19 cells, encapsulated cells retained their functionality for up to 12 days, even at 5 µM BET. Moreover, the expression of osteogenic markers indicates an enhanced osteo-inductive effect of betulin on encapsulated hFOB 1.19, compared to the non-encapsulated cell culture. The 3D micro-environment of the AlGel microcapsules successfully protects the hFOB 1.19 cells against BET cytotoxicity, allowing BET to improve the mineralization and differentiation of osteoblast cells.

New-generation biofilm effective antimicrobial peptides and a real-time anti-biofilm activity assay: CoMIC.

Nowadays, it is very important to produce new-generation drugs with antimicrobial properties that will target biofilm-induced infections. The first target for combating these microorganisms, which are the source itself. Antimicrobial peptides, which are more effective than antibiotics due to their ability to kill microorganisms and use a different metabolic pathway, are among the new options today. The aim of this study is to develop new-generation antibiotics that inhibit both biofilm-producing bacteria and the biofilm itself. For this purpose, we designed four different peptides by combining two amino acid forms (D- and L-) with the same sequence having alpha helix structures. It was found that the combined use of these two forms can increase antimicrobial efficacy more than 30-fold. These results are supported by molecular modeling and scanning electron microscopy (SEM), at the same time cytotoxicity (IC50) and hemotoxicity (HC50) values remained within the safe range. Furthermore, antibiofilm activities of these peptides were investigated. Since the existing biofilm inhibition methods in the literature do not technically simulate the exact situation, in this study, we have developed a real-time observable biofilm model and a new detection method based on it, which we call the CoMIC method. Findings have shown that the NET1 peptide with D-leucine amino acid in its structure and the NET3 peptide with D-arginine amino acid in its structure are effective in inhibiting biofilm. As a conclusion, our peptides can be considered as potential next-generation broad-spectrum antibiotic molecule/drug candidates that might be used in biofilm and clinical important bacteria. KEY POINTS: • Antimicrobial peptides were developed to inhibit both biofilms producing bacteria and the biofilm itself. • CoMIC will fill a very crucial gap in understanding biofilms and conducting the necessary quantitative studies. • Molecular modelling studies, NET1 peptide molecules tends to move towards and adhere to the membrane within nanoseconds.

Development and pharmaceutical investigation of novel cervical cancer-targeting and redox-responsive melittin conjugates.

Cervical cancer has recently become one of the most prevalent cancers among women throughout the world. Traditional cancer therapies generate side effects due to off-target toxicity. Thus, novel cancer medications coupled with suitable drug delivery systems are required to improve cancer therapies. Melittin peptide has a high affinity to disrupt cancer cells. In this study, we designed targeted and redox-responsive Melittin conjugates for cervical cancer and then tested them in vitro. Folic acid and squamous cell carcinoma-specific peptide (CKQNLAEG) were used as targeting agents to design various conjugates. Our findings indicate that both anticancer conjugates were effective against different cancer cell lines, including MCF-7, C33A, and HeLa. Moreover, these conjugates were found to have antioxidant and antibacterial effects as well as reduced hemolytic activity. The CM-Target (N-terminus cysteine modified-Melittin-targeting peptide-functionalized conjugate) has become more stable and acted specifically against squamous cell carcinoma, whereas folic acid (FA)-containing conjugates acted efficiently against all cancer types studied, especially for breast cancer. According to our results, these anticancer conjugates may be possible anticancer drug candidates that have fewer adverse effects.

Thermo-Responsive Hydrogels Encapsulating Targeted Core-Shell Nanoparticles as Injectable Drug Delivery Systems.

As therapeutic agents that allow for minimally invasive administration, injectable biomaterials stand out as effective tools with tunable properties. Furthermore, hydrogels with responsive features present potential platforms for delivering therapeutics to desired sites in the body. Herein, temperature-responsive hydrogel scaffolds with embedded targeted nanoparticles were utilized to achieve controlled drug delivery via local drug administration. Poly(N-isopropylacrylamide) (pNIPAM) hydrogels, prepared with an ethylene-glycol-based cross-linker, demonstrated thermo-sensitive gelation ability upon injection into environments at body temperature. This hydrogel network was engineered to provide a slow and controlled drug release profile by being incorporated with curcumin-loaded nanoparticles bearing high encapsulation efficiency. A core (alginate)-shell (chitosan) nanoparticle design was preferred to ensure the stability of the drug molecules encapsulated in the core and to provide slower drug release. Nanoparticle-embedded hydrogels were shown to release curcumin at least four times slower compared to the free nanoparticle itself and to possess high water uptake capacity and more mechanically stable viscoelastic behavior. Moreover, this therapy has the potential to specifically address tumor tissues over-expressing folate receptors like ovaries, as the nanoparticles target the receptors by folic acid conjugation to the periphery. Together with its temperature-driven injectability, it can be concluded that this hydrogel scaffold with drug-loaded and embedded folate-targeting nanoparticles would provide effective therapy for tumor tissues accessible via minimally invasive routes and be beneficial for post-operative drug administration after tumor resection.

In vitro efficacy of different PEGylation designs on cathelicidin-like peptide with high antibacterial and antifungal activity.

Recent reports on antibiotic resistance have highlighted the need to reduce the impact of this global health issue through urgent prevention and control. The World Health Organization currently considers antibiotic resistance as one of the most dangerous threats to global health. Therefore, Antimicrobial peptides (AMPs) are promising for the development of novel antibiotic molecules due to their high antimicrobial effects, non-inducing antimicrobial resistance (AMR) properties, and broad spectrum. Hence, in this study, we developed novel antimicrobial peptide/polymer conjugates to reduce the adverse effects of TN6 (RLLRLLLRLLR) peptide. We demonstrate how our constructs function in vitro in terms of antimicrobial activity, hemolytic activity, cytotoxicity, and protease resistance. Our findings show that our molecules are effective against different types of microorganisms such as Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, methicillin-resistant S. aureus, vancomycin-resistant Enteroccus faecium, and Candida albicans, which are known to be pathogenic and antibiotic-resistant. Our constructs generally showed low cytotoxicity relative to the peptide in HaCaT and 3T3 cells. Especially these structures are very successful in terms of hemotoxicity. In the bacteremia model with S. aureus, the naked peptide (TN6) was hemotoxic even at 1 µg/mL, while the hemotoxicity of the conjugates was considerably lower than the peptide. Remarkably in this model, the hemolytic activity of PepC-PEG-pepC conjugate decreased 15-fold from 2.36 to 31.12 µg/mL compared to the bacteria-free 60-min treatment. This is proof that in the case of bacteremia and sepsis, the conjugates specifically direct to bacterial cell membranes rather than red blood cells. In addition, the PepC-PEG-pepC conjugate is resistant to plasma proteases. Moreover, morphological and intracellular damage of the peptide/conjugates to Escherichia coli are demonstrated in SEM and TEM images. These results suggest our molecules can be considered potential next-generation broad-spectrum antibiotic molecule/drug candidates that might be used in clinical cases such as bacteremia and sepsis.

Preparation of Cell-Loaded Microbeads as Stable and Injectable Delivery Platforms for Tissue Engineering.

Cell transplants in therapeutic studies do not preserve their long-term function inside the donor body. In mesenchymal stem cell (MSC) transplants, transplanted cells disperse through the body and are prone to degradation by immune cells after the transplant process. Various strategies, such as usage of the immunosuppressive drugs to eliminate allograft rejection, are designed to increase the efficiency of cell therapy. Another strategy is the construction of biomimetic encapsulates using polymeric materials, which isolate stem cells and protect them from environmental effects. In this study, fibroblasts (L929) and MSCs were investigated for their improved viability and functionality once encapsulated inside the alginate microbeads under in vitro conditions for up to 12 days of incubation. Thus, uniform and injectable (<200 µm) cell-loaded microbeads were constructed by the electrostatically assisted spraying technique. Results showed that both L929 and MSCs cells continue their metabolic activity inside the microbeads during the incubation periods. Glucose consumption and lactic acid production levels of both cell lines were consistently observed. The released cell number on day 12 was found to be increased compared to day 0. Protein expression levels of both groups increased every day with the expected doubling rate. Hence, this strategy with a simple yet clever design to encapsulate either MSCs or L929 cells might outstand as a potential cell delivery platform for cell therapy-based tissue engineering.

A Novel Peptide-Based Detection of SARS-CoV-2 Antibodies.

The need for rapidly developed diagnostic tests has gained significant attention after the recent pandemic. Production of neutralizing antibodies for vaccine development or antibodies to be used in diagnostic tests usually require the usage of recombinant proteins representing the infectious agent. However, peptides that can mimic these recombinant proteins may be rapidly utilized, especially in emergencies such as the recent outbreak. Here, we report two peptides that mimic the receptor binding domain of the spike protein of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and investigate their binding behavior against the corresponding human immunoglobulin G and immunoglobulin M (IgG and IgM) antibodies in a clinical sample using a quartz crystal microbalance (QCM) sensor. These peptides were immobilized on a QCM sensor surface, and their binding behavior was studied against a clinical serum sample that was previously determined to be IgG and IgM-positive. It was determined that designed peptides bind to SARS-CoV-2 antibodies in a clinical sample. These peptides might be useful for the detection of SARS-CoV-2 antibodies using different methods such as enzyme-linked immunosorbent assay (ELISA) or lateral flow assays. A similar platform might prove to be useful for the detection and development of antibodies in other infections.

Dendrons and Multiarm Polymers with Thiol-Exchangeable Cores: A Reversible Conjugation Platform for Delivery.

Disulfide exchange reaction has emerged as a powerful tool for reversible conjugation of proteins, peptides and thiol containing molecules to polymeric supports. In particular, the pyridyl disulfide group provides an efficient handle for the site-specific conjugation of therapeutic peptides and proteins bearing cysteine moieties. In this study, novel biodegradable dendritic platforms containing a pyridyl disulfide unit at their focal point were designed. Presence of hydroxyl groups at the periphery of these dendrons allows their elaboration to multivalent initiators that yield poly(ethylene glycol) based multiarm star polymers via controlled radical polymerization. The pyridyl disulfide unit at the core of these star polymers undergoes efficient reaction with thiol functional group containing molecules such as a hydrophobic dye, namely, Bodipy-SH, glutathione, and KLAK sequence containing peptide. While conjugation of the hydrophobic fluorescent dye to the PEG-based multiarm polymer renders it water-soluble, it can be cleaved off the construct through thiol-disulfide exchange in the presence of an external thiol such as dithiothreitol. The multiarm polymer was conjugated with a thiol group containing apoptotic peptide to increase its solubility and cellular transport. In vitro cytotoxicity and apoptosis assays demonstrated that the resultant peptide-polymer conjugate had almost five times more apoptotic potential primarily through triggering apoptosis by disrupting mitochondrial membranes of human breast cancer cell line (MDA-MB-231) compared to naked peptide. The novel dendritic platform disclosed here offers an attractive template that can be modified to multiarm polymeric constructs bearing a "tag and release" characteristic.

Design and Synthesis of Water-Soluble Multifunctionalizable Thiol-Reactive Polymeric Supports for Cellular Targeting.

Design and synthesis of novel water-soluble polymers bearing reactive side chains are actively pursued due to their increasing demand in areas such as bioconjugation and drug delivery. This study reports the fabrication of poly(ethylene glycol) methacrylate based thiol-reactive water-soluble polymeric supports that can serve as targeted drug delivery vehicles. Thiol-reactive maleimide units were incorporated into polymers as side chains by use of a furan-protected maleimide containing monomer. Atom transfer radical polymerization (ATRP) was employed to obtain a family of well-defined copolymers with narrow molecular weight distributions. After the polymerization, the maleimide groups were activated to their reactive form, ready for conjugation with thiol-containing molecules. Efficient functionalization of the maleimide moieties was demonstrated by conjugation of a tripeptide glutathione under mild and reagent-free aqueous conditions. Additionally, hydrophobic thiol-containing dye (Bodipy-SH) and a cyclic peptide-based targeting group (cRGDfC) were sequentially appended onto the maleimide bearing polymers to demonstrate their efficient multifunctionalization. The conjugates were utilized for in vitro experiments over both cancerous and healthy breast cell lines. Obtained results demonstrate that the conjugates were nontoxic, and displayed efficient cellular uptake. The presence of the peptide based targeting group had a clear effect on increasing the uptake of the dye-conjugated polymers into cells when compared to the construct devoid of the peptide. Overall, the facile synthesis and highly efficient multifunctionalization of maleimide-containing thiol-reactive copolymers offer a novel and attractive class of polyethylene glycol-based water-soluble supports for drug delivery.

Sequence-controlled polymerization using dendritic macromonomers: precise chain-positioning of bulky functional clusters.

A simple strategy to insert functional dendrons at precise positions along a linear polymer backbone is reported. Sequence controlled copolymerization of styrene and polyester dendrons containing a maleimide unit at their focal points was utilized to yield such polymers.