ORNIDAZOL-BASED APPLICATION SORBENT WITH NANO SILICA AND ITS ANTIMICROBIAL ACTIVITY.

OBJECTIVE: The aim: To investigate the effect of application sorbent based on ornidazole with nanosilicon in experiment and clinic. PATIENTS AND METHODS: Materials and methods: In order to study the effectiveness of the Ornidasil application sorbent for the treatment of purulent wounds, we conducted an experimental study in rats. Also, we studied the effectiveness of the Ornidasil in the clinic for the treatment of patients with diabetic foot syndrome and to prevent the suppuration of postoperative wounds in patients with purulent peritonitis in toxic and terminal stages. RESULTS: Results: The formation of active substance complexes with hydroxylated matrices is due to hydrogen bonds between the oxygen atom of the silanol group of the silica surface and the hydrogen atom of the alcohol group of the ornidazole molecule. This promotes the gradual release of ornidazole from the surface of such a matrix into the wound exudate. Thus, on day 13, 9 experimental rats of group I healed completely, 11 rats had a small wound surface, complete healing occurred on day 15. We also investigated the effectiveness Ornidasil in the clinic. In the comparison group, postoperative wound suppuration occurred in 6 patients (31.6%), and in the main group - in 3 patients (12.5%). CONCLUSION: Conclusions: A study of the effectiveness Ornidasil in the complex treatment of Diabetic foot syndrome showed that in the experimental groups, wound healing occurred 1.6 -1.9 times faster. The use of polyurethane wound protector in combination with Ornidasil reduced the suppuration of postoperative wounds in patients of the main group by 2.5 times relative to patients in the comparison group.

Spin crossover in 2D iron(ii) phthalazine cyanometallic complexes.

Two new 2D spin-crossover (SCO) analogues of Hofmann clathrates of composition [Fe(phth)2MII(CN)4] (where phth = phthalazine; MII = Pd, Pt) have been synthesized and their structures and switchable behaviour have been characterized. Single-crystal X-ray analysis reveals that the Pt and Pd derivatives contain FeII centres equatorially surrounded by four equivalent µ4-[MII(CN)4]2- groups. Two crystallographically equivalent phthalazine (phth) ligands occupy the axial positions of each FeII site, completing its octahedral coordination environment. The stabilization of these structures is realized via supramolecular C-HM interactions and π-π stacking. Temperature-dependent magnetic susceptibility measurements showed that Pt (T1/2↓ = 211 K and T1/2↑ = 218 K) and Pd (T1/2↓ = 202 K and T1/2↑ = 207 K) derivatives display cooperative spin crossover with narrow thermal hysteresis loops. In addition, spin crossover in these complexes was characterized by optical measurements, differential scanning calorimetry, and IR and Raman spectroscopy. This research shows that the use of phthalazine leads to the production of new SCO systems with attractive transition characteristics and opens up new perspectives for the design of switchable complexes based on fused bicyclic azine ligands.

Comparative Clinical Study of the Wound Healing Effects of a Novel Micropore Particle Technology: Effects on Wounds, Venous Leg Ulcers, and Diabetic Foot Ulcers

OBJECTIVE: The purpose of this study was to determine the wound healing effects of Acapsil, a white, odorless powder based on micropore particle technology (MPPT) (Willingsford Ltd, Southampton, UK) by comparing it to Gentaxane (Gentaksan, Borshchagovsky CCP, Kyiv, Ukraine) (polydimethylsiloxane powder with gentamicin antibiotic) and Ioddicerin (Farmak, Kyiv, Ukraine) (iodine with dimethyl sulfoxide [DMSO]). MATERIALS AND METHODS: The study included 266 patients with primarily trophic ulcers caused by pancreatic diabetes and venous insufficiency of the lower extremities, carbuncles, phlegmons, infected third- or fourth-degree heat burns, and infiltrations of postoperative wounds. The products were applied once daily to the wound until it was clean (ie, free from necrosis, pus, and fibrinogenous thickenings). RESULTS: The number of days (mean ± standard deviation) to a clean wound was 3.0 ± 0.9 for MPPT (n = 88) compared with 7.0 ± 1.2 and 8.0 ± 1.1 for Gentaxane (n = 90) and iodine/DMSO (n = 88), respectively. Thus, MPPT reduced the time to reach a clean wound by 57% and 62%, respectively. Products were used once daily until a clean wound was reached, which also reflects the number of applications. Days to onset of granulation for MPPT, Gentaxane, and iodine/DMSO were 4.5 ± 0.8, 9.2 ± 1.4, and 10.3 ± 1.5 days, respectively; and days to onset of epithelialization were 7.8 ± 1.1, 14.1 ± 1.9, and 16.4 ± 2.7 days, respectively. Subgroup analysis of patients with diabetic foot and venous leg ulcers found that each of these demonstrated the same pattern of healing as the overall study. The number of hospitalization days was 14.6 ± 5.6 for MPPT, 21.0 ± 10.7 for Gentaxane, and 24.0 ± 7.9 for iodine/DMSO. Compared with Gentaxane, patients receiving MPPT had a 31% reduction in hospitalization duration and a 39% reduction compared with iodine/DMSO. CONCLUSION: These findings demonstrate that MPPT represents a valuable new approach to wound care.

Manganese(II) Complexes with Schiff Bases Immobilized on Nanosilica as Catalysts of the Reaction of Ozone Decomposition.

In this article, we submit the description of synthesis and identification of manganese(II) complexes with pyrogenic nanosilica-immobilized (d av = 10 nm; S sp = 290 m(2)/g) hydroxyaldimine ligands [Formula: see text]: salicilaldiminopropyl (L1); 5-bromosalicilaldiminopropyl (L2); 2-hydroxynaphtaldiminopropyl (L3); 2-hydroxy-3-methoxybenzaldiminopropyl (L4); 2-hydroxy-3,5-dichloroacetophenoniminopropyl (L5); and 4-hydroxy-3-methoxybenzaldiminopropyl (L6). The ligands and complexes were characterized by UV-VIS and IR spectrometry. Nanocomposites consisting of complexes [Formula: see text] showed a high catalytic activity in low-temperature ozone decomposition in the range of concentrations between 2.1 × 10(-6) and 8.4 × 10(-6) mol/l. The number of catalytic cycles increased for isostructural pseudotetrahedral complexes [Formula: see text] (L1-L5) in the following order: Mn(L3)2 >> Mn(L4)2 > Mn(L1)2 > Mn(L2)2 > Mn(L5)2. In the case of pseudooctahedral complexes with L6, the change of coordination polyhedral does not influence the kinetics and stoichiometric parameters of the reaction.

Evaluation and identification of priority air pollutants for environmental management on the basis of risk analysis in Russia.

Since 1997, more than 30 health-risk analyses were conducted using Russian data sets. These studies demonstrated that air pollution is the most important environmental contributor toward morbidity and mortality risk in Russia, with 90% of the total human health risk coming from the criteria pollutants total suspended particulate (TSP), SO2, and NO(x). This article contributes to the ongoing discussion of the magnitude of this health issue in Russia by providing an estimate of both the mortality rate attributed to airborne pollutants and the associated economic damages. The 90% confidence interval of mortality is 46,000-132,000, and the associated economic damages are between 2.6 and 6.5% of gross domestic product (GDP). The largest source of uncertainty in mortality is the concentration-response parameter, accounting for 50-60% of the total variability in the estimate. The point estimate of 87,000 implies that mortality due to airborne pollutants is threefold higher than reported due to tuberculosis, twofold due to transportation accidents, and about the same as that from suicide and homicide combined. By 2002 there was enough evidence regarding potential health hazard and air pollution exposure in Russia to start environmental management reform. In 2004 Russia officially adopted guidelines for health risk analysis associated with air pollution. The next step is to use this health-risk assessment approach as a lead for sensible reforms of the emissions-permit system and environmental finance.

Developing risk-based priorities for reducing air pollution in urban settings in Ukraine.

Ukraine, when part of the former Soviet Union, was responsible for about 25% of its overall industrial production. This aging industrial infrastructure continues to emit enormous volumes of air and water pollution and wastes. The National Report on the State of Environment in Ukraine 1999 (Ukraine Ministry of Environmental Protection [MEP], 2000) shows significant air pollution. There are numerous emissions that have been associated with developmental effects, chronic long-term health effects, and cancer. Ukraine also has been identified as a major source of transboundary air pollution for the eastern Mediterranean region. Ukraine's Environment Ministry is not currently able to strategically target high-priority emissions and lacks the resources to address all these problems. For these reasons, the U.S. Environmental Protection Agency set up a partnership with Ukraine's Ministry of Environmental Protection to strengthen its capacity to set environmental priorities through the use of comparative environmental risk assessment and economic analysis--the Capacity Building Project. The project is also addressing improvements in the efficiency and effectiveness of the use of its National Environmental Protection Fund. The project consists of a series of workshops with Ukrainian MEP officials in comparative risk assessment of air pollutant emissions in several heavily industrialized oblasts; cost-benefit and cost-effectiveness analysis; and environmental finance. Pilot risk assessment analyses have been completed. At the end of the Capacity Building Project it is expected that the use of the National Environmental Protection fund and the regional level oblast environmental protection funds will begin to target and identify the highest health and environmental risk emissions.