Use of the gonadal tissue of the sea urchin Paracentrotus lividus as a target for environmental contamination by trace metals.

Many environmental monitoring works have been carried out using biomarkers as a tool to identify the effects of oil contamination on marine organisms; however, only a few studies have used sea urchin gonadal tissue for this purpose. Within this context, the present work aimed to understand the impact of an oil spill, proposing the use of sea urchin gonadal tissue as a biomarker for environmental contamination by trace metals in the species Paracentrotus lividus. Biometric analysis, quantification analyses of the elements Cd, Pb, Ni, Fe, Mn, Zn, and Cu, as well as histopathological evaluations were performed in gonads of P. lividus collected from an area affected by hydrocarbons, named as impacted shore (IS) and an area not affected, named reference shore (RS). The results showed that carapace diameter (DC), total wet weight (WW), and Cd concentrations in the gonads were significantly influenced by the interaction between the rocky shores of origin, the months of sampling, and by the sex of the individuals. Moreover, from July until September, the levels of Zn and Cd were significantly lower in male than in female gonads. In July (the month of the oil spill), the indexes of histopathological alterations (IHPA) of membrane dilation were significantly higher in individuals from the IS, compared to the individuals from the RS. In addition, there were significant correlations between biometric variables (wet weight, diameter of carapace, gonadal weight, and gonadosomatic index) and the elements Cd, Cu, Ni, and Mn concentrations. Lastly, a delay in the gametogenic cycle of the sea urchins from IS was also observed. Taken together, these findings suggest that direct exposure to trace metals induces histopathological lesions in P. lividus' gonads and affects its reproductive cycle.

Identification of traits to improve co-assimilation of glucose and xylose by adaptive evolution of Spathaspora passalidarum and Scheffersomyces stipitis yeasts.

Lignocellulosic biomass is a renewable raw material for producing several high-value-added chemicals and fuels. In general, xylose and glucose are the major sugars in biomass hydrolysates, and their efficient utilization by microorganisms is critical for an economical production process. Yeasts capable of co-consuming mixed sugars might lead to higher yields and productivities in industrial fermentation processes. Herein, we performed adaptive evolution assays with two xylose-fermenting yeasts, Spathaspora passalidarum and Scheffersomyces stipitis, to obtain derived clones with improved capabilities of glucose and xylose co-consumption. Adapted strains were obtained after successive growth selection using xylose and the non-metabolized glucose analog 2-deoxy-D-glucose as a selective pressure. The co-fermentation capacity of evolved and parental strains was evaluated on xylose-glucose mixtures. Our results revealed an improved co-assimilation capability by the evolved strains; however, xylose and glucose consumption were observed at slower rates than the parental yeasts. Genome resequencing of the evolved strains revealed genes affected by non-synonymous variants that might be involved with the co-consumption phenotype, including the HXT2.4 gene that encodes a putative glucose transporter in Sp. passalidarum. Expression of this mutant HXT2.4 in Saccharomyces cerevisiae improved the cells' co-assimilation of glucose and xylose. Therefore, our results demonstrated the successful improvement of co-fermentation through evolutionary engineering and the identification of potential targets for further genetic engineering of different yeast strains. KEY POINTS: • Laboratory evolution assay was used to obtain improved sugar co-consumption of non-Saccharomyces strains. • Evolved Sp. passalidarum and Sc. stipitis were able to more efficiently co-ferment glucose and xylose. • A mutant Hxt2.4 permease, which co-transports xylose and glucose, was identified.

Experiences and Needs of Patients, Caregivers and Nurses during the COVID-19 Pandemic: Study Protocol for a Mixed-Methods Multicentre Study.

The COVID-19 pandemic is a major public health problem with millions of confirmed cases and deaths described. Nurses are among the health care professionals most involved at the front line, caring for those affected by COVID-19. Patients and families have been subjected to a high emotional burden of fear, anxiety, and uncertainty. The COVID-19 pandemic has had a significant impact on the approach to patients, the organisation of care, and communication with patients and their families, all requiring considerable adaptation on the part of nurses and health care professionals. The overall aim of this research was to find out the needs of patients with COVID-19, the nursing interventions provided and their outcomes, and to explore the experiences of the nurses, patients, and caregivers. A mixed method study will be performed with a convergent design. The study was divided into three phases. Quantitative methods involved nurses and patients affected by COVID-19 with a questionnaire. Qualitative methods involved nurses, patients, and caregivers with interviews and finally a quantitative analysis of the nursing documentation of the interviewed patients. We hope that this study will help us to understand and identify the main nursing and support needs expressed by patients and their families at different stages of their illness.

Are tolerance processes limiting the responses of Hediste diversicolor to cadmium exposure? A multimarker approach.

Cadmium (Cd) is considered a priority hazardous substance under the European Community Directive 2013/39 due to its ecotoxicity. The ragworm Hediste diversicolor (O.F. Müller, 1776), a common species in estuaries and coastal lagoons, plays an important ecological role in these ecosystems and is a suitable bioindicator of environmental chemical contamination. In this study, H. diversicolor was chosen as an ecotoxicological model with the aim of evaluating the responses to Cd contamination, considering a multi-biomarker approach (mortality, biometry, behaviour, Cd bioaccumulation, oxidative stress and damage, and energy metabolism). Also, the hypothesis of different tolerances resulting in different responses was evaluated, by collecting worms from three systems distinctly impacted by metal contamination (Mondego estuary, Óbidos Lagoon and Sado estuary - Portugal). Animals were exposed under laboratory conditions to cadmium (10, 50 and 100 µg/L), for 10 days. Significant differences were observed in responses amongst worms originating from the different sites. Organisms from the less impacted systems revealed greater effects on mortality, biomass decrease and burrowing behaviour, as well as higher bioaccumulation potential, after exposure to Cd. Biochemical and behaviour impairments were observed as a consequence of Cd exposure, although not in a concentration-dependant manner. The results obtained in this study reinforce the importance of integrating endpoint responses, at the individual and sub-individual levels, to assess potential changes induced by pollutants in the physiological status and fitness of H. diversicolor and help to predict what their ecological consequences might be.

Evaluation of different strains of Saccharomyces cerevisiae for ethanol production from high-amylopectin BRS AG rice (Oryza sativa L.).

Ethanol is the main biofuel produced by fermentation route and the search for new feedstocks to produce fuel ethanol is still a great challenge. This work aims to compare the ethanol production from a new irrigated rice cultivar BRS AG to the conventional cultivar BRS PAMPA applied in Brazil. Six different commercial strains of Saccharomyces cerevisiae (BG-1, CAT-1, FT-858, JP-1, PE-2, and SA-1) were applied in fermentation reactions. Fermentations performed with BRS PAMPA rice revealed that the highest yields were achieved with strain SA-1, corresponding to 93.0% of the theoretical maximum and final ethanol concentration of 58.92 g L-1, and with CAT-1, a yield of 92.7% and final ethanol concentration of 58.93 g L-1. For the fermentations with BRS AG rice, the highest yields were obtained with strain FT-858, exhibiting a 89.6% yield and final ethanol concentration of 62.45 g L-1, and with CAT-1, 87.9% yield and final ethanol concentration of 61.25 g L-1 were achieved. The most appropriate microorganism for ethanol production using BRS PAMPA rice and BRS AG rice was CAT-1. Comparatively, the ethanol yield and productivity using BRS AG were higher than those observed for BRS PAMPA for all strains, except for PE-2 and SA-1 that led to very similar results. The experimental results showed that the giant rice BRS AG is an excellent feedstock for fuel ethanol production in lowland fields.

Enhanced Tolerance of Spathaspora passalidarum to Sugarcane Bagasse Hydrolysate for Ethanol Production from Xylose.

During the pretreatment and hydrolysis of lignocellulosic biomass to obtain a hydrolysate rich in fermentable sugars, furaldehydes (furfural and hydroxymethylfurfural), phenolic compounds, and organic acids are formed and released. These compounds inhibit yeast metabolism, reducing fermentation yields and productivity. This study initially confirmed the ability of Spathaspora passalidarum to ferment xylose and demonstrated its sensibility to the inhibitors present in the hemicellulosic sugarcane bagasse hydrolysate. Then, an adaptive laboratory evolution, with progressive increments of hydrolysate concentration, was employed to select a strain more resistant to hydrolysate inhibitors. Afterward, a central composite design was performed to maximize ethanol production using hydrolysate as substrate. At optimized conditions (initial cell concentration of 30 g/L), S. passalidarum was able to produce 19.4 g/L of ethanol with productivity, yield, and xylose consumption rate of 0.8 g/L.h and 0.4 g/g, respectively, in a sugarcane bagasse hemicellulosic hydrolysate. A kinetic model was developed to describe the inhibition of fermentation by substrate and product. The values obtained for substrate saturation and inhibition constant were Ks = 120.4 g/L and Ki = 1293.4 g/L. Ethanol concentration that stops cell growth was 30.1 g/L. There was an agreement between simulated and experimental results, with a residual standard deviation lower than 6%.

[Bullying in Ticino's healthcare contexts: Impact on employee's well being and organization]. / Il bullismo nel sistema sanitario ticinese: L'impatto sul benessere dei collaboratori e sull'organizzazione.

INTRODUCTION: Bullying in health care setting has a globally prevalence between 1% and 87% and it's in constant increase described by "WHO" as: "Bullying is a major public health problem". It is defined as a repeated ill-treatment, harmful for the health of one or more individuals by one or more people. There are different types of behaviours and they vary from verbal abuse, offensive conduct, humiliating and intimidating attitudes. Those attitudes won't help you doing your job. Different are the outcomes that those actions have on victims: anxiety, sleep disturbances, generalized pain and reduced attention. The objective of the study was to investigate the presence of the phenomenon within the Ticino (Swiss Canton) on healthcare contexts and to explain its experiences. METHODS: A qualitative study was conducted on a sample of healthcare professionals who are active in the Ticino (Switzerland) healthcare context through 18 semi-structured interviews and their thematic analysis. RESULTS: The results that emerged shows how the problem is also relevant in Ticino`s healthcare contexts, sometimes with different modalities and outcomes, moreover, experiencing these situations during one's working career leads to re-proposing such behaviours, as it is considered a rite of passage. What emerges in a predominant way is the lack of programs or structures aimed to prevent and support the victim and the perpetrator.

Xylitol production on sugarcane biomass hydrolysate by newly identified Candida tropicalis JA2 strain.

Xylitol is a building block for a variety of chemical commodities, besides being widely used as a sugar substitute in the food and pharmaceutical industries. The aim of this work was to develop a microbial process for xylitol production using sugarcane bagasse hydrolysate as substrate. In this context, 218 non-Saccharomyces yeast strains were screened by growth on steam-exploded sugarcane bagasse hydrolysate containing a high concentration of acetic acid (8.0 g/L). Seven new Candida tropicalis strains were selected and identified, and their ability to produce xylitol on hydrolysate at low pH (4.6) under aerobic conditions was evaluated. The most efficient strain, designated C. tropicalis JA2, was capable of producing xylitol with a yield of 0.47 g/g of consumed xylose. To improve xylitol production by C. tropicalis JA2, a series of experimental procedures were employed to optimize pH and temperature conditions, as well as nutrient source, and initial xylose and inoculum concentrations. C. tropicalis JA2 was able to produce 109.5 g/L of xylitol with a yield of 0.86 g/g of consumed xylose, and with a productivity of 2.81 g·L·h, on sugarcane bagasse hydrolysate containing 8.0 g/L acetic acid and177 g/L xylose, supplemented with 2.0 g/L yeast nitrogen base and 4.0 g/L urea. Thus, it was possible to identify a new C. tropicalis strain and to optimize the xylitol production process using sugarcane bagasse hydrolysate as a substrate. The xylitol yield on biomass hydrolysate containing a high concentration of acetic acidobtained in here is among the best reported in the literature.

Development and validation of HILIC-UHPLC-ELSD methods for determination of sugar alcohols stereoisomers and its application for bioconversion processes of crude glycerin.

The recent increase in the production of crude glycerin through the manufacture of biodiesel has imputed a commercial issue, the excess of this raw material in the market and its constant devaluation, which resulted in the need for new technologies for its use. Crude glycerin can be used in biotechnological processes for the production of high value-added compounds. This study presents novel, simple and fast methods based on ultra-high performance liquid chromatography (UHPLC) using evaporative light scattering detection (ELSD) for simultaneous analysis of ten sugar alcohols with a hydrophilic interaction chromatography (HILIC) column. The selected compounds and their possible stereoisomers have major commercial importance and they can be obtained by biotechnological routes. Under optimized conditions, threitol, erythritol, adonitol, xylitol, arabitol, iditol, sorbitol, mannitol, dulcitol and volemitol can be analyzed simultaneously within 15.0 min. The use of different column temperatures was a key parameter to reach the selectivity during the separation of some stereoisomers. Regression equations revealed a good linear relationship (R > 0.995) over the range from 50.0 to 800.0 ng. Limits of detection (LOD) and quantification (LOQ) ranged from 30.0 to 45.0 ng and 50.0-75.0 ng, respectively. The HILIC-UHPLC-ELSD methods showed good precision with low coefficient of variation (CV%) for the intra- and inter-assays experiments (≤ 5.1%) and high repeatability in terms of retention times for each analyte (≤ 0.5%). The accuracy was confirmed with an average recovery ranging from 92.3 to 107.3%. The developed methods employ an analytical technique more accessible and suitable for routine analyzes and have shown to be suitable for simultaneous analysis of sugar alcohols present in crude bioconverted glycerin samples using different classes of microorganisms.

Monitoring metal pollution on coastal lagoons using Cerastoderma edule-a report from a moderately impacted system in Western Portugal (Óbidos Lagoon).

The main goal of this monitoring program was to evaluate the contamination in the intertidal environment of Óbidos Lagoon by the metals Cd, Pb, and Ni on water, sediments, and on biological samples, using the bivalve Cerastoderma edule (common name: cockle) as a biomonitor. Since C. edule is an edible mollusc, the risk of their consumption by humans from this lagoon was also evaluated. The study was performed in a restricted area of the lagoon-the ML station-where human activities, such as shellfish harvesting, intersect with the natural processes occurring in this system. The results obtained revealed that the water samples were polluted with Cd and Pb with concentrations (0.00025 mg l-1 and 0.0072 mg l-1) above the maximum legislated on the Directive 2008/105/EC, while for Ni, this occurred only on one of the seasons sampled (summer 2010: 0.029 mg l-1). The sediments were not contaminated with Cd and Ni, and the contamination detected for the metal Pb, allowed the classification of this station as an unpolluted site ([Pbmin] = 7.477 mg.kg-1 and [Pbmax] = 19.875 mg.kg-1). On biological samples, comparing the results of metal contaminations with the values of the maximum levels fixed by European Commission Regulation (EC) No 1881/2006 and USFDA, all the results were below the legal value. Therefore, during the period of study, the consumption of this bivalve by humans was safe. Also, BAF and CF calculations suggest that C. edule can be used as a biomonitor to determine the source of the contaminations. This study supported the use of C. edule as a biomonitor to assess the contamination by the metals Pb and Ni at the Óbidos Lagoon and allowed to predict the potential transfer of metals to higher trophic levels with potential impacts on the natural and human communities.

The presence of cadmium in the intertidal environments of a moderately impacted coastal lagoon in western Portugal (Óbidos Lagoon)--spatial and seasonal evaluations.

A seasonal environmental monitoring program was carried out (winter 2009 to summer 2010) to evaluate the spatial and seasonal cadmium concentrations in the intertidal environments of the Óbidos Lagoon (Portugal). Also, some environmental parameters were monitored at each sampling station. Both the water and the sediment samples were contaminated, although to different degrees. In general, cadmium contamination appears to be mostly focused on the inner areas of the lagoon, namely, in Barrosa's arm, which receives a small tributary contaminated by agro-industrial activities. Only cadmium concentration in sediment showed to be significantly influenced by seasons. Some environmental parameters presented spatial and temporal heterogeneity which influenced, to some extent, cadmium bioavailability. The results of this study allow a better understanding of the environmental quality of this ecosystem regarding cadmium contamination and may assist in the definition of future coastal management measures specifically targeted to trace metal contamination and pollution monitoring.

A Survey on Synthesis Processes of Structured Materials for Biomedical Applications: Iron-based Magnetic Nanoparticles, Polymeric Materials and Polymerization Processes.

Magnetic materials based on iron oxides are extensively designed for several biomedical applications. Heterogeneous polymerization processes are powerful tools for the production of tailored micro-sized and nanosized magneto-polymeric particles. Although several polymerization processes have been adopted along the years, suspension, emulsion and miniemulsion systems deserve special attention due to its ability to produce spherical polymer particles containing magnetic nanoparticles homogeneously dispersed into the polymer thermoplastic matrices. The main objective of this paper is to review the main methods of synthesis of iron-based magnetic nanoparticles and to illustrate how typical polymerization processes in different dispersion medium can be successfully used to produce engineered magnetic core-shell structures. It is exemplified the use of suspension, emulsion and miniemulsion polymerization processes in order to support experimental methodologies required for the production of magnetic polymer particles intended for biomedical applications such as intravascular embolization treatments, drug delivery systems and hyperthermia treatment.

Phytoremediation of cadmium by the facultative halophyte plant Bolboschoenus maritimus (L.) Palla, at different salinities.

The cadmium phytoremediation capacity of the halophyte plant Bolboschoenus maritimus (L.) Palla and the influence of water salinity were assessed in a greenhouse experiment, in order to better understand the bioremediation capacity of this plant. Three concentrations of cadmium (0, 50 and 100 µg l(-1)) and four salinity conditions (0, 5, 10 and 20) were chosen to evaluate the cadmium accumulation, in order to test these plants as a potential phytoremediation tool in brackish environments. The cadmium content in water and plants (underground organs, stems and leaves) was analysed with graphite furnace atomic absorption spectrometry. All the plants submitted to salinity 20 and in the three cadmium treatments died. The plants' survival was highest in the lowest salinities, where highest growth and biomasses were also obtained. The plants presented more cadmium content in the rhizomes, followed by stems and even less in leaves. The salt stress of the plants interfered with their cadmium accumulation capacity. The highest cadmium accumulation in the rhizomes occurred at salinity 0, while the salinities 0 and 5 were the most adequate for stems and leaves. The experiment pointed out that B. maritimus represents a good possible intervenient for cadmium bioremediation in freshwater and low salinity brackish water environments, but its use is limited in the habitats of higher salinity.

Effect of the combination of uridine nucleotides, folic acid and vitamin B12 on the clinical expression of peripheral neuropathies.

AIMS: Peripheral neuropathy (PN) is a common condition whose incidence is approximately 8% in elderly persons. Neuropathic pain (NeP) has a significant incidence in the general population and affects more than half of all patients with PN. The pathophysiology of PN is characterized by lesions of myelin-producing Schwann cells in peripheral nerves. Regeneration/protection of the myelin sheath after a nerve lesion is a fundamental element of repair in PN. Nucleotides such as uridine monophosphate (UMP) have proven to be efficacious in treating the cause of the myelin sheath lesion in several experimental and clinical models. Our objective was to evaluate clinical improvement in patients with PN and NeP treated with a combination of UMP+folic acid+vitamin B12 (Keltican). PATIENTS AND METHODS: We performed an exploratory, open-label, multicenter, study of 212 patients followed for 2 months. Pain was assessed using the painDETECT questionnaire (PDQ). RESULTS: The intensity of the NeP assessed at the time of the consultation progressed favorably and decreased significantly (p<0.001) in all the types of PN included. The global score for pain assessed using PDQ decreased from 17.5 points to 8.8 points at the final evaluation (p<0.001). Nonsteroidal anti-inflammatory drugs were decreased/withdrawn in 77.4% of patients. CONCLUSIONS: The combination of UMP+folic acid+vitamin B12 is effective against NeP associated with PN. It leads to statistically significant reductions not only in the total PDQ score but also in the intensity of pain, number of areas affected, and pain radiation. Furthermore, it makes it possible to reduce the dosage of concomitant medication.

The influence of cadmium contamination and salinity on the survival, growth and phytoremediation capacity of the saltmarsh plant Salicornia ramosissima.

The major aim of this study was to evaluate the capacity of Salicornia ramosissima on Cadmium phytoremediation under distinct salinities and, consequently, the toxic effects on the plant's development. A greenhouse experiment was performed, using two Cd concentrations (50 and 100 µg l(-1)) in different salinities (0, 5 and 10). Mortality and weight variation, observed at the end of the experiment, showed significant differences between some treatments, meaning that these variables were affected by the salinity and Cd concentrations. The highest Cd accumulation was detected in the roots, and decreased with the increase of salinity and Cd concentration. S. ramosissima is a potential candidate for Cd phytoremediation at salinities close to 0 and its capabilities in Cd phytoaccumulation and phytoestabilization proved to be quite interesting. The optimization of phytoremediation processes by S. ramosissima could turn possible the use of this plant in the recovery of contaminated ecosystems.

Influência de propriedades físico químicas dos materiais resinosos e da técnica de inserção na adaptação marginal de restaurações classe II / Influence of physicochemical properties of resin materials and insertion technique on marginal adaptation of class II restorations

A contração de polimerização das resinas compostas é uma característica indesejável que compromete a integridade da interface dente/restauração. O objetivo deste estudo foi avaliar in vitro a influência de diferentes materiais usados em restaurações classe II de resina composta, quanto ao grau de conversão, tensão de contração, resistência a flexão, módulo de elasticidade e formação de fenda marginal. Foram realizados preparos classe II com dimensões de 4x4x2mm em terceiros molares recém-extraídos para a avaliação da formação de fenda marginal. As cavidades foram niveladas com cimento de ionômero de vidro Riva Light Cure (SDI) (CIV), resina de baixa contração SureFil®SDR™ (Dentsply) (SDR), resina flow Filtek™Z350Flow (3M/ESPE) (Z350F) e resina composta Filtek™P90 (3M/ESPE) (P90). As restaurações (n=3) foram avaliadas com lupa estereoscópica. A resistência a flexão foi avaliada por meio de ensaio de flexão em três pontos. Para este ensaio foram confeccionados dez corpos de prova (n=10) de cada material com dimensões de 10x2x1mm. Para o teste de tensão de contração foram utilizados cilindros de polimetacrilato com 5 mm de diâmetro e 13 ou 28mm de comprimento. Os bastões foram fixados na EMIC com um espaço de 2mm entre eles, onde os materiais foram inseridos. Foram realizadas cinco repetições para cada grupo (n=5) e a tensão proveniente da contração foi medida por até 10 minutos após o início da fotopolimerização. O Grau de Conversão (GC) foi determinado por espectroscopia no infravermelho com transformada de Fourier (FTIR). Os resultados foram tratados estatisticamente por análise de variância (ANOVA) e Teste de Tukey (p<0,05). Fenda marginal: Z350F = CIV > SDR = P90. Tensão de contração: Z350F > SDR > CIV = P90. Resistência a flexão: P90 > SDR = Z350F > CIV. Módulo de Elasticidade: P90 > CIV = SDR = Z350F. GC: Z350F = SDR > P90 > CIV. Conclusões: existe correlação entre a formação de fenda marginal e as propriedades físico químicas...

The shrinkage of composite resin polymerization is an undesirable characteristic that compromises the integrity of the tooth / restoration interface. The aim of this study was to evaluate in vitro the influence of different materials used in composite resin class II restorations in terms of contraction stress, flexural strength, degree of conversion and marginal gap formation. Class II preparation were performed with 4x4x2mm dimensions in third molars freshly extracted for the evaliation of marginal gap formation. The cavities were filled with Riva Light Cure (SDI) glass ionomer cement (CIV), SureFil ® SDR ™ (Dentsply) low shrinkage resin (SDR), Filtek ™ Z350Flow (3M/ESPE) flowable composite (Z350F) and Filtek ™ P90 (3M/ESPE) composite resin (P90). The restorations (n = 3) were evaluated with magnifying stereoscopic. The flexural strength was assessed by means of three point bending test. For this test ten specimens (n = 10) of each material were made, each with 10x2x1mm dimensions. For the shrinkage stress test polymethacrylate cylinders with 5 mm in diameter and 13 or 28mm in length were used. Bats were attached to the EMIC with a 2mm space between them, where the materials were inserted. The test were repeated five times for each group (n = 5) and the contraction stress was measured for up to 10 minutes after initiation of photopolymerization. The Degree of Conversion (DC) was determined by Fourier transform infrared (FTIR). The results were statistically analyzed by the variance analysis (ANOVA) and Tukey test (p <0.05). Marginal gap: Z350F = CIV > SDR = P90. Contraction stress: Z350F > SDR> CIV = P90. Flexural strength: P90 > SDR = Z350F > CIV. Elasticity Modulus: P90 > CIV = SDR = Z350F. DC: Z350F = SDR > P90 > CIV. Conclusion: There is a correlation between formation of marginal gap and physicochemical properties of the materials tested whereas low shrinkage resins provided better marginal...

Influência de propriedades físico químicas dos materiais resinosos e da técnica de inserção na adaptação marginal de restaurações classe II / Influence of physicochemical properties of resin materials and insertion technique on marginal adaptation of class II restorations

A contração de polimerização das resinas compostas é uma característica indesejável que compromete a integridade da interface dente/restauração. O objetivo deste estudo foi avaliar in vitro a influência de diferentes materiais usados em restaurações classe II de resina composta, quanto ao grau de conversão, tensão de contração, resistência a flexão, módulo de elasticidade e formação de fenda marginal. Foram realizados preparos classe II com dimensões de 4x4x2mm em terceiros molares recém-extraídos para a avaliação da formação de fenda marginal. As cavidades foram niveladas com cimento de ionômero de vidro Riva Light Cure (SDI) (CIV), resina de baixa contração SureFil®SDR™ (Dentsply) (SDR), resina flow Filtek™Z350Flow (3M/ESPE) (Z350F) e resina composta Filtek™P90 (3M/ESPE) (P90). As restaurações (n=3) foram avaliadas com lupa estereoscópica. A resistência a flexão foi avaliada por meio de ensaio de flexão em três pontos. Para este ensaio foram confeccionados dez corpos de prova (n=10) de cada material com dimensões de 10x2x1mm. Para o teste de tensão de contração foram utilizados cilindros de polimetacrilato com 5 mm de diâmetro e 13 ou 28mm de comprimento. Os bastões foram fixados na EMIC com um espaço de 2mm entre eles, onde os materiais foram inseridos. Foram realizadas cinco repetições para cada grupo (n=5) e a tensão proveniente da contração foi medida por até 10 minutos após o início da fotopolimerização. O Grau de Conversão (GC) foi determinado por espectroscopia no infravermelho com transformada de Fourier (FTIR). Os resultados foram tratados estatisticamente por análise de variância (ANOVA) e Teste de Tukey (p<0,05). Fenda marginal: Z350F = CIV > SDR = P90. Tensão de contração: Z350F > SDR > CIV = P90. Resistência a flexão: P90 > SDR = Z350F > CIV. Módulo de Elasticidade: P90 > CIV = SDR = Z350F. GC: Z350F = SDR > P90 > CIV. Conclusões: existe correlação entre a formação de fenda marginal e as propriedades físico químicas ...

The shrinkage of composite resin polymerization is an undesirable characteristic that compromises the integrity of the tooth / restoration interface. The aim of this study was to evaluate in vitro the influence of different materials used in composite resin class II restorations in terms of contraction stress, flexural strength, degree of conversion and marginal gap formation. Class II preparation were performed with 4x4x2mm dimensions in third molars freshly extracted for the evaliation of marginal gap formation. The cavities were filled with Riva Light Cure (SDI) glass ionomer cement (CIV), SureFil ® SDR ™ (Dentsply) low shrinkage resin (SDR), Filtek ™ Z350Flow (3M/ESPE) flowable composite (Z350F) and Filtek ™ P90 (3M/ESPE) composite resin (P90). The restorations (n = 3) were evaluated with magnifying stereoscopic. The flexural strength was assessed by means of three point bending test. For this test ten specimens (n = 10) of each material were made, each with 10x2x1mm dimensions. For the shrinkage stress test polymethacrylate cylinders with 5 mm in diameter and 13 or 28mm in length were used. Bats were attached to the EMIC with a 2mm space between them, where the materials were inserted. The test were repeated five times for each group (n = 5) and the contraction stress was measured for up to 10 minutes after initiation of photopolymerization. The Degree of Conversion (DC) was determined by Fourier transform infrared (FTIR). The results were statistically analyzed by the variance analysis (ANOVA) and Tukey test (p <0.05). Marginal gap: Z350F = CIV > SDR = P90. Contraction stress: Z350F > SDR> CIV = P90. Flexural strength: P90 > SDR = Z350F > CIV. Elasticity Modulus: P90 > CIV = SDR = Z350F. DC: Z350F = SDR > P90 > CIV. Conclusion: There is a correlation between formation of marginal gap and physicochemical properties of the materials tested whereas low shrinkage resins provided better marginal ...

Trauma dentário: tratamento multidisciplinar: Relato de caso / Dental trauma: Multidisciplinary treatment: Case report

O traumatismo dentário afeta, principalmente, crianças na faixa etária entre 2 a 10 anos, sendo mais afetados os incisivos centrais superiores, devido ao posicionamento vulnerável na arcada. De acordo com a necessidade estética e a fragilidade do estágio de desenvolvimento do dente, o tratamento deve ser acompanhado de diferentes formas. Esse relato clínico tem po objetivo apresentar o acompanhamento multidisciplinar de acordo com a evolução do caso clínico. A determinação de cada procedimento se baseou na manutenção da saúde dos tecidos periodontais e na reabilitação dentária e, por conclusão, que o planejamento do tratamento multidisciplinar é fundamental para a otimização dos resultados obtidos na realização dos procedimentos que visam o restabelecimento estético-biológico satisfatório do elemento dentário afetado pelo trauma.

Dental trauma mainly affects children, between 2 - 10 years old. Due to the vulnerable positioning, upper central incisors are the most affected. According to the esthetic needing and the fragile stage of tooth development, the treatment must be accompanied in different ways. This clinical report aims to present the multidisciplinary follow-up of a clinical case evolution. Each procedure determination was based on maintaining periodontal tissue health and dental rehabilitation and,by conclusion, the multidisciplinary treatment is essential to meet requirements during the case development, ensuring satisfactory esthetic and biological results in trauma affected teeth affected.

A zircônia na odontologia restauradora / Zirconia in restorative dentistry

A necessidade de melhores propriedades mecânicas dos materiais cerâmicos levou à introdução da zircônia na Odontologia. A zircônia é um polimorfo bem conhecido que existe sob três formas: monoclínica (m), tetragonal (t) e cúbica (c). O notável desempenho da zircônia, já explorado em diversas aplicações médicas e de engenharia, deve-se principalmente à transformação da fase tetragonal metaestável para a fase monoclínica (T → M). O objetivo deste trabalho foi realizar uma revisão da literatura pertinente à zircônia visando um melhor entendimento de sua utilização na Odontologia, bem como descrever um caso clínico realizado com este material.

Differential survival of Escherichia coli uvrA, uvrB, and uvrC mutants to psoralen plus UV-A (PUVA): Evidence for uncoupled action of nucleotide excision repair to process DNA adducts.

The nucleotide excision repair mechanism (NER) of Escherichia coli is responsible for the recognition and elimination of more than twenty different DNA lesions. Herein, we evaluated the in vivo role of NER in the repair of DNA adducts generated by psoralens (mono- or bi-functional) and UV-A light (PUVA) in E. coli. Cultures of wild-type E. coli K12 and mutants for uvrA, uvrB, uvrC or uvrAC genes were treated with PUVA and cell survival was determined. In parallel, kinetics of DNA repair was also evaluated by the comparison of DNA sedimentation profiles in all the strains after PUVA treatment. The uvrB mutant was more sensitive to PUVA treatment than all the other uvr mutant strains. Wild-type strain, and uvrA and uvrC mutants were able to repair PUVA-induced lesions, as seen by DNA sedimentation profiles, while the uvrB mutant was unable to repair the lesions. In addition, a quadruple fpg nth xth nfo mutant was unable to nick PUVA-treated DNA when the crude cell-free extract was used to perform plasmid nicking. These data suggest that DNA repair of PUVA-induced lesions may require base excision repair functions, despite proficient UvrABC activity. These results point to a specific role for UvrB protein in the repair of psoralen adducts, which appear to be independent of UvrA or UvrC proteins, as described for the classical UvrABC endonuclease mechanism.