RESUMEN
As wastewater contains a variety of contaminating bacteria and oily residues, there is an urgent need for environmentally safe bactericidal agents and surfactants which can be applied for wastewater treatment. The present study emphasizes on the potential of hydrophobin-like protein (HFB-NJ1) extracted from sporulating mycelia of Aspergillus sp. NJ1 for wastewater treatment. The purified HFB-NJ1, depicted the presence of one single protein band of molecular size approximately 11-12 kDa on silver-stained SDS-PAGE gel. HFB-NJ1 also presented properties such as surface modification of glass and stable emulsification of sunflower oil. HFB-NJ1 depicted exceptional antibacterial activity against bacterial pathogens such as Bacillus subtilis and Pseudomonas aeruginosa at low MIC of 0.5 µg/mL and 0.75 µg/mL respectively. Additionally, HFB-NJ1 depicted enhanced emulsification of various vegetable and petroleum-based oils (E24 > 80%). HFB-NJ1 effectively reduced gold ions, producing nanospheres with a size of 15.33 nm - a recognized antimicrobial agent. This study underscores the multifunctional attributes of HFB-NJ1, highlighting its efficacy in removing pathogenic bacteria, emulsifying organic compounds from wastewater, and demonstrating a reduction ability for nanoparticle synthesis.
Asunto(s)
Proteínas Fúngicas , Aguas Residuales , Aguas Residuales/química , Proteínas Fúngicas/farmacología , Antibacterianos/farmacología , Antibacterianos/química , Aspergillus/efectos de los fármacos , Pseudomonas aeruginosa/efectos de los fármacos , Eliminación de Residuos Líquidos/métodos , Bacillus subtilis/efectos de los fármacos , Pruebas de Sensibilidad Microbiana , Purificación del Agua/métodosRESUMEN
The current investigation reports the usage of adaptive neuro-fuzzy inference system (ANFIS) and artificial neural network (ANN), the two recognized machine learning techniques in modelling tetracycline (TC) adsorption onto Cynometra ramiflora fruit biomass derived activated carbon (AC). Many characterization methods utilized, confirmed the porous structure of synthesized AC. ANN and ANFIS models utilized pH, dose, initial TC concentration, mixing speed, time duration, and temperature as input parameters, whereas TC removal percentage was designated as the output parameter. The optimized configuration for the ANN model was determined as 6-8-1, while the ANFIS model employed trimf input and linear output membership functions. The obtained results showed a strong correlation, indicated by high R2 values (ANNR2: 0.9939 & ANFISR2: 0.9906) and low RMSE values (ANNRMSE: 0.0393 & ANFISRMSE: 0.0503). Apart from traditional isotherms, the dataset was fitted to statistical physics models wherein, the double-layer with a single energy satisfactorily explained the physisorption mechanism of TC adsorption. The sorption energy was 21.06 kJ/mol, and the number of TC moieties bound per site (n) was found to be 0.42, conclusive of parallel binding of TC molecules to the adsorbent surface. The adsorption capacity at saturation (Qsat) was estimated to be 466.86 mg/g - appreciably more than previously reported values. These findings collectively demonstrate that the AC derived from C. ramiflora fruit holds great potential for efficient removal of TC from a given system, and machine learning approaches can effectively model the adsorption processes.
Asunto(s)
Biomasa , Carbón Orgánico , Aprendizaje Automático , Redes Neurales de la Computación , Tetraciclina , Adsorción , Tetraciclina/química , Tetraciclina/análisis , Carbón Orgánico/química , Frutas/química , Contaminantes Químicos del Agua/química , Contaminantes Químicos del Agua/análisisRESUMEN
The present study reports the synthesis, characterization, and application of sustainable magnetic biochar composite. The inedible fruits of Vateria indica, a powerful ayurvedic plant were hydrothermally transformed into magnetic biochar (BC-Fe3O4) in a single step and characterized by several sophisticated techniques. FESEM analysis portrayed fibrous irregular mesh-like biochar with surface clustered Fe3O4 nanoparticles, while the incidence of carbon, oxygen, and iron in the elemental analysis by EDS established magnetic biochar formation. Numerous peaks consistent with planes of (220), (311), (400), (422), (511), (440), and (120) also substantiated the occurrence of magnetite nanoparticles and biochar respectively, as analyzed by XRD. XPS analysis showed signals at 285.65 eV, 533.28 eV, 711.08 eV, and 724.68 eV corroborating a strong C-O bond, O1s orbit, Fe2+, and Fe3+ respectively. BC-Fe3O4 was superparamagnetic with saturation magnetization of 4.74 emu/g, as per VSM studies, while its specific surface area, pore volume, and pore diameter were 5.74 m2/g, 0.029 cm3/g, and 20.86 nm respectively. The Fenton-like degradation of methylene blue (5.0-25.0 ppm) was accomplished by synthesized BC-Fe3O4, in the presence of H2O2. Within 180 min, almost complete degradation was achieved, with first-order kinetics having rate constants between 0.0299 and 0.0167 min-1. Stability and recyclability studies performed over 7 cycles exhibited unaltered degradation between 93.98 and 97.59%. This study exhibits the exceptional characteristics and degradation capabilities of BC-Fe3O4 synthesized from a sustainable plant biomass.
Asunto(s)
Carbón Orgánico , Carbón Orgánico/química , Frutas/química , Colorantes/química , Peróxido de Hidrógeno/química , Hierro/química , Catálisis , Contaminantes Químicos del Agua/químicaRESUMEN
The adsorption properties of 2,4-Dichlorophenoxyacetic acid (2,4-D) onto biochar, obtained through HCl-assisted hydrothermal carbonization process of Vateria indica fruits (VI-BC), were extensively studied using traditional and statistical physics approaches. The traditional adsorption investigations encompassed kinetics, equilibrium, and thermodynamics studies. Subsequently, the Hill statistical physics model was employed to interpret the mechanism. Also, artificial neural network (ANN) and adaptive neuro-fuzzy inference system (ANFIS) machine learning tools were successfully employed to model the adsorption data wherein both models had high prediction potential (R2 > 0.99). The outcomes demonstrated that the produced VI-BC exhibited remarkable adsorptive traits, having a considerable specific surface area (111.54 m2/g), pore size (5.89 nm), a variety of functional groups, and appropriate attributes for efficiently adsorbing 2,4-D. For 10 mg/L 2,4-D, at pH 2.0 and with 0.3 g/L dose, an impressive 91.67% adsorption efficiency was achieved within a 120-min. Pseudo-second-order model aptly depicted the kinetic behavior of 2,4-D adsorption, while the Freundlich model provided a more accurate representation of the isotherms. 2,4-D maximum adsorption capacity stood at 131.39 mg/g at 303 K. The Hill statistical physics model elucidated that the adsorption primarily occurred via physisorption mechanisms, involving electrostatic attractions, π-π conjugation, and pore filling. This conclusion was further substantiated by post-adsorption characterization of the VI-BC. Thermodynamic analysis indicated that the interactions between VI-BC and 2,4-D were favorable, spontaneous, and exothermic. The calculated low energy of adsorption (1.255 kJ/mol) and ΔH° value (-20.49 kJ/mol) further supported physisorption as the dominant mechanism. In summary, this study underscores the significant potential of the newly developed biochar as a promising alternative material for efficiently removing the 2,4-D herbicide from polluted environments.
Asunto(s)
Dipterocarpaceae , Herbicidas , Contaminantes Químicos del Agua , Biomasa , Frutas , Carbón Orgánico/química , Termodinámica , Física , Adsorción , Cinética , Ácido 2,4-Diclorofenoxiacético , Concentración de Iones de HidrógenoRESUMEN
Benzo(a)pyrene, a five-ring polyaromatic hydrocarbon, originating from coal tar, crude oil, tobacco, grilled foods, car exhaust etc, is highly persistent in the environment. It has been classified as a Group I carcinogen, as on its ingestion in human body, diol epoxide metabolites are generated, which bind to DNA causing mutations and eventual cancer. Among various removal methods, bioremediation is most preferred as it is a sustainable approach resulting in complete mineralization of benzo(a)pyrene. Therefore, in this study, biodegradation of benzo(a)pyrene was performed by two strains of Pseudomonas, i. e WDE11 and WD23, isolated from refinery effluent. Maximum benzo(a)pyrene tolerance was 250 mg/L and 225 mg/L against Pseudomonas sp. WD23 and Pseudomonas sp. WDE11 correspondingly. Degradation rate constants varied between 0.0468 and 0.0513/day at 50 mg/L with half-life values between 13.5 and 14.3 days as per first order kinetics, while for 100 mg/L, the respective values varied between 0.006 and 0.007 L/mg. day and 15.28-16.67 days, as per second order kinetics. The maximum specific growth rate of strains WDE11 and WD23 was 0.3512/day and 0.38/day accordingly, while concentrations over 75 mg/L had an inhibitory effect on growth. Major degradation metabolites were identified as dihydroxy-pyrene, naphthalene-1,2-dicarboxylic acid, salicylic acid, and oxalic acid, indicating benzo(a)pyrene was degraded via pyrene intermediates by salicylate pathway through catechol meta-cleavage. The substantial activity of the catechol 2,3 dioxygenase enzyme was noted during the benzo(a)pyrene metabolism by both strains with minimal catechol 1,2 dioxygenase activity. This study demonstrates the exceptional potential of indigenous Pseudomonas strains in complete metabolism of benzo(a)pyrene.
Asunto(s)
Benzo(a)pireno , Petróleo , Humanos , Biodegradación Ambiental , Benzo(a)pireno/metabolismo , Pseudomonas/metabolismo , Petróleo/metabolismo , Pirenos/metabolismo , Redes y Vías MetabólicasRESUMEN
Microplastics have been identified in all living forms including human beings, the present need is to restrain its spread and devise measures to remediate microplastics from polluted ecosystems. In this regard, the present review emphasizes on the occurrence, sources detection and toxic effects of microplastics in various ecosystems. The removal of microplastics is prevalent by various physico-chemical and biological methods, although the removal efficiency by biological methods is low. It has been noted that the degradation of plastics by insect gut larvae is a well-known aspect, however, the underlying mechanism has not been completely identified. Studies conducted have shown the magnificent contribution of gut microbiota, which have been isolated and exploited for microplastic remediation. This review also focuses on this avenue, as it highlights the contribution of insect gut microbiota in microplastic degradation along with challenges faced and future prospects in this area.
Asunto(s)
Microbioma Gastrointestinal , Contaminantes Químicos del Agua , Humanos , Animales , Microplásticos , Plásticos , Ecosistema , Contaminantes Químicos del Agua/análisis , Larva , InsectosRESUMEN
Herein, the sustainable fabrication of magnetic iron oxide nanoadsorbent prepared with activated carbon of inedible Cynometra ramiflora fruit has been investigated. Activated carbon was obtained from phosphoric acid-treated C. ramiflora fruit, which was then utilized for the synthesis of magnetic nanocomposite (CRAC@Fe2O3). The formed nanocomposite was a porous irregular dense matrix of amorphous evenly sized spherical nanoparticles, as visualized by FESEM, and also contained carbon, oxygen, iron, and phosphorous in its elemental composition. FT-IR spectrum depicted characteristic bands attributing to Fe-O, C-OH, C-N, CC, and -OH bonds. VSM and XRD results proved that CRAC@Fe2O3 was superparamagnetic with a moderate degree of crystallinity and high saturation magnetization value (1.66 emu/g). Superior surface area, pore size, and pore volume of 766.75 m2/g, 2.11 nm, and 0.4050 cm3/g respectively were measured on BET analysis of CRAC@Fe2O3 nanocomposite, indicating their suitability for use as an adsorbent. On application of this nanocomposite for adsorption of tetracycline, maximum removal of 95.78% of 50 ppm TC at pH 4, CRAC@Fe2O3 0.4 g/L in 240 min. The adsorption of TC by CRAC@Fe2O3 was confirmed as monolayer sorption by ionic interaction (R2 = 0.9999) as it followed pseudo-second-order kinetics and Langmuir isotherm (R2 = 0.9801). CRAC@Fe2O3 showed a maximum adsorption capacity of 312.5 mg/g towards TC antibiotics indicating its potential for the treatment of antibiotic-contaminated samples. Since negative ΔGo and positive ΔHo and ΔSo values were obtained at all tested temperatures during the thermodynamic studies, the adsorption was confirmed to be endothermic, spontaneous, and feasible with an enhanced degree of randomness.
Asunto(s)
Nanocompuestos , Contaminantes Químicos del Agua , Adsorción , Carbón Orgánico/química , Frutas , Espectroscopía Infrarroja por Transformada de Fourier , Contaminantes Químicos del Agua/química , Tetraciclina/química , Nanocompuestos/química , Agua/química , Antibacterianos , Cinética , Termodinámica , Fenómenos MagnéticosRESUMEN
In the present study, ferric oxide nanoparticles impregnated with activated carbon from Ulva prolifera biomass (UPAC-Fe2O3) were prepared and employed to remove 2,4-Dichlorophenoxyacetic acid (2,4-D) by adsorption. The UPAC-Fe2O3 nanocomposite was characterized for its structural and functional properties by a variety of techniques. The nanocomposite had a jagged, irregular surface with pores due to uneven scattering of Fe2O3 nanoparticles, whereas elemental analysis portrayed the incidence of carbon, oxygen, and iron. XRD analysis established the crystalline and amorphous planes corresponding to the iron oxide and carbon phase respectively. FT-IR analyzed the functional groups that confirmed the integration of Fe2O3 nanoparticles onto nanocomposite surfaces. VSM and XPS studies uncovered the superparamagnetic nature and presence of carbon and Fe2O3, respectively, in the UPAC-Fe2O3 nanocomposite. While the surface area was 292.51 m2/g, the size and volume of the pores were at 2.61 nm and 0.1906 cm3/g, respectively, indicating the mesoporous nature and suitability of the nanocomposites that could be used as adsorbents. Adsorptive removal of 2,4-D by nanocomposite for variations in process parameters like pH, dosage, agitation speed, adsorption time, and 2,4-D concentration was studied. The adsorption of 2,4-D by UPAC-Fe2O3 nanocomposite was monolayer chemisorption owing to Langmuir isotherm behavior along with a pseudo-second-order kinetic model. The maximum adsorption capacity and second order rate constant values were 60.61 mg/g and 0.0405 g/mg min respectively. Thermodynamic analysis revealed the spontaneous and feasible endothermic adsorption process. These findings confirm the suitability of the synthesized UPAC-Fe2O3 nanocomposite to be used as an adsorbent for toxic herbicide waste streams.
Asunto(s)
Herbicidas , Nanocompuestos , Contaminantes Químicos del Agua , Adsorción , Carbón Orgánico , Espectroscopía Infrarroja por Transformada de Fourier , Contaminantes Químicos del Agua/análisis , Nanocompuestos/química , Herbicidas/análisis , Cinética , Termodinámica , Fenoxiacetatos , Ácido 2,4-Diclorofenoxiacético , Fenómenos Magnéticos , Concentración de Iones de HidrógenoRESUMEN
The current study emphasizes the activated carbon fabrication from rubber fig leaves, the establishment of its composite with iron oxide nanoparticles (RFAC@Fe2O3), and its relevance in the adsorptive elimination of tetracycline. The physical and functional properties of RFAC@Fe2O3 nanocomposite were uncovered by multiple approaches. Elemental analysis portrayed the existence of carbon, oxygen, and iron, while FESEM analysis revealed that Fe2O3 nanoparticle agglomerates were entrenched in the activated carbon matrix rendering it a rough abrasive texture. FT-IR analysis reported the presence of functional groups attributing to CC, -OH, crystalline iron oxide, and Fe-O stretching vibrations, and XRD corroborated graphitic crystalline structure, oxygenated functional groups attached to carbon accompanied by crystalline plane corresponding to Fe2O3 nanoparticles. XPS spectra depicted signature peaks for C, O, and Fe, while VSM studies designated its superparamagnetic nature. The high surface area (662.73 m2/g), pore size (3.12 nm), and mesoporous nature of RFAC@Fe2O3 make it apt for the adsorption of pollutants from contaminated samples. The adsorption of tetracycline (50 ppm) by RFAC@Fe2O3 was maximum at pH 4.0. As the nanocomposite dosage and stirring speed increased to 2.0 g/L and 150 rpm, maximum adsorption was observed due to more active binding sites and improved mixing. Freundlich isotherm along with pseudo-second-order model well described adsorption process divulging that tetracycline was adsorbed onto RFAC@Fe2O3 composite in multi-layers by chemisorption. Thermodynamic analysis signified negative values for ΔG°, while positive values for ΔH° and ΔS were obtained, indicating spontaneous feasible endothermic adsorption.
Asunto(s)
Ficus , Hevea , Contaminantes Químicos del Agua , Adsorción , Carbón Orgánico , Goma , Árboles , Espectroscopía Infrarroja por Transformada de Fourier , Contaminantes Químicos del Agua/análisis , Cinética , Tetraciclina/química , Agua , Termodinámica , Antibacterianos/análisis , Hojas de la Planta , Fenómenos Magnéticos , Concentración de Iones de HidrógenoRESUMEN
Overexploitation of natural resources to meet human needs has considerably impacted CO2 emissions, contributing to global warming and severe climatic change. This review furnishes an understanding of the sources, brutality, and effects of CO2 emissions and compelling requirements for metamorphosis from a linear to a circular bioeconomy. A detailed emphasis on microalgae, its types, properties, and cultivation are explained with significance in attaining a zero-carbon circular bioeconomy. Microalgal treatment of a variety of wastewaters with the conversion of generated biomass into value-added products such as bio-energy and pharmaceuticals, along with agricultural products is elaborated. Challenges encountered in large-scale implementation of microalgal technologies for low-carbon circular bioeconomy are discussed along with solutions and future perceptions. Emphasis on the suitability of microalgae in wastewater treatment and its conversion into alternate low-carbon footprint bio-energies and value-added products enforcing a zero-carbon circular bioeconomy is the major focus of this review.
Asunto(s)
Microalgas , Humanos , Aguas Residuales , Carbono , Biocombustibles , Dióxido de Carbono , BiomasaRESUMEN
Global industrialisation and overexploitation of fossil fuels significantly impact greenhouse gas emissions, resulting in global warming and other environmental problems. Hence, investigations on capturing, storing, and utilising atmospheric CO2 create novel technologies. Few microorganisms, microalgae, and macroalgae utilise atmospheric CO2 for their growth and reduce atmospheric CO2 levels. Activated carbon and biochar from biomasses also capture CO2. Nanomaterials such as metallic oxides, metal-organic frameworks, and MXenes illustrate outstanding adsorption characteristics, and convert CO2 to carbon-neutral fuels, creating a balance between CO2 production and elimination, thus zeroing the carbon footprint. The need for a paradigm shift from fossil fuels and promising technologies on renewable energies, carbon capture mechanisms, and carbon sequestration techniques that help reduce CO2 emissions for a better tomorrow are reviewed to achieve the world's sustainable development goals. The challenges and possible solutions with future perspectives are also discussed.
RESUMEN
Bacillus sp. WD22, previously isolated from refinery effluent, degraded 71% of C8 hydrocarbons present in 1.0% v/v PCO in seawater (control medium), which reduced to 16.3%, on addition of yeast extract. The bacteria produced a biosurfactant in both media, whose surface was observed to be amorphous in nature under FESEM-EDAX analysis. The biosurfactant was characterized as a linear surfactin by LCMS and FT-IR analysis. The critical micelle concentration was observed as 50 mg/L and 60 mg/L at which the surface tension of water was reduced to 30 mN/m. Purified biosurfactant could emulsify petroleum-based oils and vegetable oils effectively and was stable at all tested conditions of pH, salinity and temperature up to 80 °C. The biosurfactant production was found to be mixed growth associated in control medium, while it was strictly growth associated in medium with yeast extract as studied by the Leudeking-Piret model.
Asunto(s)
Bacillus , Petróleo , Petróleo/análisis , Bacillus/metabolismo , Espectroscopía Infrarroja por Transformada de Fourier , Tensoactivos/farmacología , Tensoactivos/química , Tensión Superficial , Biodegradación AmbientalRESUMEN
The final sinkers of polyaromatic hydrocarbons are water sources, where they undergo bioaccumulation and biomagnification, leading to adverse mutagenic, carcinogenic, and teratogenic effects on exposure in flora, fauna, and humans. Two indigenous strains, Pseudomonas sp. WDE11 and Pseudomonas sp. WD23, isolated from refinery effluent, degraded over 97.5% of benzo(a)fluorene (10 mg/L) in 7 days. On growth at concentration dependent amounts (50 mg/L and 100 mg/L), the degradation reduced to approximately 90% and 80% respectively in 56 days. Degradation kinetics was concentration dependent, as degradation followed first-order and second-order kinetics for 50 mg/L and 100 mg/L respectively. The half-life for degradation of benzo(a)fluorene ranged between 11.64 - 12.26 days and 13.11-14.5 days for strains WDE11 and WD23 respectively. The values of Andrew-Haldane kinetic parameters i.e. µmax, Ks, and Ki were 0.306 day-1, 11.11 mg/L, and 120.41 mg/L for strain WDE11 respectively, while for strain WD23, the respective values were 0.312 day-1, 9.97 mg/L, and 152 mg/L. Degradation metabolites were identified by their MS patterns as 3,4-dihydroxy fluorene, 2-(1-oxo-2,3-dihydro-1H-inden-2-yl) acetic acid, 3,4-dihydrocoumarin, salicylic acid, catechol, and oxalic acid. Metabolic pathway of degradation constructed, revealed that benzo(a)fluorene was metabolized via the formation of fluorene, further metabolized by salicylate pathway forming catechol. The catechol formed was degraded into simpler metabolites by meta-cleavage pathway, which was validated by catechol 2,3 dioxygenase enzyme activity.
Asunto(s)
Hidrocarburos Policíclicos Aromáticos , Pseudomonas , Biodegradación Ambiental , Catecol 2,3-Dioxigenasa/metabolismo , Catecoles/metabolismo , Fluorenos/metabolismo , Humanos , Cinética , Ácido Oxálico/metabolismo , Hidrocarburos Policíclicos Aromáticos/metabolismo , Pseudomonas/metabolismo , Ácido Salicílico/metabolismoRESUMEN
This study deals with the synthesis of hydroxyapatite nanoparticles (HAPnps) mediated by Acacia falcata leaf extract. Aggregates of needle-shaped crystalline nanostructures were confirmed by FE-SEM and TEM analysis. Well-defined rings in the SAED patterns corroborated the polycrystalline nature of the HAPnps. Individual elements present in the HAPnps were attested by the specific signals for Ca, P, and O in the EDS and XPS analyses. The distinct peaks observed in the XRD spectrum matched well with the HAP hexagonal patterns with a mean crystallite size of 55.04 nm. The FTIR study unveiled the coating of the nanoparticles with the biomolecules from Acacia falcata leaves. The suspension HAPnps exhibited polydispersity (0.446) and remarkable stability (zeta potential: - 31.9 mV) as evident from DLS studies. The pore diameter was 25.7 nm as obtained from BET analysis, suggesting their mesoporous nature. The HAPnps showed the cytotoxic effect on A549 lung and MDA-MB231 breast carcinoma cell lines, with an IC50 value of 55 µg/mL. The distortion of the cell membrane and cell morphology, along with the chromatin condensation and cell necrosis on treatment with HAPnps were detected under fluorescence microscopy post acridine orange/ethidium bromide dye staining. This study reports the anti-cancerous potential of non-drug-loaded plant-mediated HAPnps. Therefore, the HAPnps obtained in this investigation could play a vital role in the biomedical field of cancer therapy.
Asunto(s)
Acacia , Nanopartículas del Metal , Animales , Línea Celular , Durapatita , Mamíferos , Nanopartículas del Metal/química , Extractos Vegetales/farmacología , Plata/químicaRESUMEN
Heavy metals are dumped into the environment as a result of human activities, posing a serious threat to ecology and human health. Surface water, potable drinking water, potable groundwater, and majority of wastewater include their traces, due to which, their detection by nanoparticles has received a lot of attention in recent years. Although microorganisms are utilized for green nanoparticle production, plant materials have recently been explored because they are more environmentally friendly, easier to scale up, and require fewer specific growth conditions. The production and attributes of nanoparticles synthesized by plant mediation could be enhanced through design of experiments approach, extending their feasibility in the detection of heavy metals in polluted environmental samples. A concise review on green synthesis of silver and gold nanoparticles utilizing plant phytochemicals, its mechanism of synthesis along with significance of design of experiments for enhancement, and their use as heavy metal contamination detectors is presented in the current study.
Asunto(s)
Nanopartículas del Metal , Metales Pesados , Oro/química , Humanos , Nanopartículas del Metal/química , Extractos Vegetales/química , Plata/químicaRESUMEN
Effect of oil spills on living forms demands for safe, ecofriendly and cost-effective methods to repair the damage. Pseudomonads have exceptional tolerance to xenobiotics and can grow at varied environmental conditions. This study aims at biosurfactant mediated degradation of petroleum crude oil by an indigenous Pseudomonas sp. WD23 in sea water. Pseudomonas sp. WD23 degraded 34% of petroleum crude oil (1.0% v/v) on supplementation of yeast extract (0.05 g/L) with glucose (1.0 g/L) in seawater. The strain produced a biosurfactant which was confirmed as a rhamnolipid (lipid: rhamnose 1:3.35) by FT-IR, LCMS and quantitative analysis. Produced rhamnolipid had low CMC (20.0 mg/L), emulsified petroleum oils (75-80%) and had high tolreance to varied conditions of pH, temperature and ionic strength. OFAT studies were performed to analyse the effect of petroleum crude oil, glucose, inoculum, yeast extract, pH, agitation speed and incubation time on degradation by Pseudomonas sp. WD23. Petroleum crude oil and glucose had significant effect on biodegradation, rhamnolipid production and growth, further optimized by central composite design. At optimum conditions of 3.414% v/v PCO and 6.53 g/L glucose, maximum degradation of 81.8 ± 0.67% was observed at pH 7.5, 100 RPM, 15.0% v/v inoculum in 28 days, with a 3-fold increase in biodegradation. GCMS analysis revealed degradation (86-100%) of all low and high molecular weight hydrocarbons present in petroleum crude oil. Hence, the strain Pseudomonas sp. WD23 can be effectively developed for management of oil spills in seas and oceans due to its excellent degradation abilities.
Asunto(s)
Petróleo , Pseudomonas , Biodegradación Ambiental , Glucosa/metabolismo , Glucolípidos , Nitrógeno/análisis , Petróleo/análisis , Pseudomonas/metabolismo , Agua de Mar , Espectroscopía Infrarroja por Transformada de Fourier , Tensoactivos/químicaRESUMEN
Kleibsiella pneumoniae Kpn555, isolated from coffee waste pulp showed high level of tolerance to lead with a minimum inhibitory concentration of 900 mg/L. On its growth in nutrient broth supplemented with lead, brown clumps were visualised at the bottom of the flask. On scanning and transmission electron microscopic studies the brown clumps were corroborated to be bacterial cells with lead biosorbed on the cell surface and accumulated inside the cytoplasm. Biochemical and FT-IR analysis of the extracellular polymeric substance produced on exposure to lead revealed its chemical nature as glycolipid with protein moieties. Purified EPS (100 mg/L) could remove 50% of lead from aqueous solution (200 mg/L). Isolation of plasmid from Klebsiella pneumoniae Kpn555 revealed the presence of a plasmid of size 30-40 kb. This capability of the bacteria was proven to be plasmid mediated as the Escherichia coli DH5α cells transformed with the plasmid of Klebsiella pneumoniae Kpn555 also could tolerate 900 mg/L of lead and form brown clumps. This study shows that these bacteria, aided by EPS could serve as an effective agent for the removal of lead from contaminated water environmental samples.
RESUMEN
Use of novel biological materials as adsorbents for removal of xenobiotics is gaining significance owing to their exceptional advantages. An extracellular polymeric substance (EPS) produced by Lysinibacillus sp. SS1 had rough porous surface as observed by SEM analysis. Adsorption ability of EPS was estimated against various textile dyes such as Malachite Green (MG), Methyl Orange, Congo Red and Coomassie Blue. About 82% of MG (100 mg/L) was adsorbed onto 2.5 mg EPS within 30 min. Effect of MG concentration, EPS weight, agitation speed and incubation time on adsorption, studied by one factor at a time approach, revealed that adsorption was influenced by all factors. Maximum adsorption of 99.01 ± 0.61% was achieved at 100 mg/L MG, 10 mg EPS, 120 RPM in 75 min with maximum adsorption capacity of 247.5 mg/g. Kinetics was affected by MG and EPS amounts, with shift from pseudo first to pseudo second order with increase in concentration. Adsorption of MG by EPS of Lysinibacillus sp. SS1 was identified as unilayer chemisorption as it followed Langmuir isotherm with maximum adsorption capacity (Q m ) of 178.57 mg/g (R 2 = 0.9889). This is the first report on potential of EPS produced by Lysinibacillus sp. SS1 as novel biodegradable adsorbent with high efficacy of MG removal from aqueous solutions.
RESUMEN
In the current investigation, statistical approaches were adopted to hydrolyse non-edible seed cake (NESC) of Pongamia and optimize the hydrolysis process by response surface methodology (RSM). Through the RSM approach, the optimized conditions were found to be 1.17%v/v of HCl concentration at 54.12 min for hydrolysis. Under optimized conditions, the release of reducing sugars was found to be 53.03 g/L. The RSM data were used to train the artificial neural network (ANN) and the predictive ability of both models was compared by calculating various statistical parameters. A three-layered ANN model consisting of 2:12:1 topology was developed; the response of the ANN model indicates that it is precise when compared with the RSM model. The fit of the models was expressed with the regression coefficient R2, which was found to be 0.975 and 0.888, respectively, for the ANN and RSM models. This further demonstrated that the performance of ANN was better than that of RSM.
RESUMEN
Enterococcus durans NCIM5427 (ED-27), capable of producing an intracellular acid stable lipase, was isolated from fish processing waste. Its growth and subsequent lipase production was optimized by Box Behneken design (optimized conditions: 5 % v/v fish waste oil (FWO), 0.10 mg/ml fish waste protein hydrolysates (FWPH) at 48 h of fermentation time). Under optimized conditions, ED-27 showed a 3.0 fold increase (207.6 U/ml to 612.53 U/ml) in lipase production, as compared to un-optimized conditions. Cell growth and lipase production was modeled using Logistic and Luedeking-Piret model, respectively; and lipase production by ED-27 was found to be growth-associated. Lipase produced by ED-27 showed stability at low pH ranges from 2 to 5 with its optimal activity at 30 °C , pH 4.6; showed metal ion dependent activity wherein its catalytic activity was activated by barium, sodium, lithium and potassium (10 mM); reduced by calcium and magnesium (10 mM). However, iron and mercury (5 mM) completely inactivated the enzyme. In addition, modifying agents like SDS, DTT, ß-ME (1%v/v) increased activity of lipase of ED-27; while, PMSF, DEPC and ascorbic acid resulted in a marked decrease. ED-27 had maximum cell growth of 9.90309 log CFU/ml under optimized conditions as compared to 13 log CFU/ml in MRS. The lipase produced has potential application in poultry and slaughterhouse waste management.