Biochar from palm fiber wastes as an activator of different oxidants for the elimination of pharmaceuticals from diverse classes in aqueous samples.

Biochar (BP) obtained from palm fiber wastes was combined with H2O2, peroxymonosulfate (PMS), or persulfate (PDS) to treat valsartan, acetaminophen, and cephalexin in water. BP activated PMS and PDS but no H2O2. Computational calculations indicated that interactions of PMS and PDS with BP are more favored than those with HP. The highest synergistic effect was obtained for the removal of valsartan by BP + PMS. This carbocatalytic process was optimized, evaluating the effects of pH, BP dose, and peroxymonosulfate concentration, and minimizing the oxidant quantity to decrease costs and environmental impacts of the process. SO4•-, HO•, 1O2, and O2•- were the agents involved in the degradation of the pharmaceuticals. The reusability of BP was tested, showing that the carbocatalytic process removed ∼80% of target pollutants after 120 min of treatment even at the fourth reuse cycle. Also, the process decreased the phytotoxicity of the treated sample. Simulated hospital wastewater was treated and its components induced competing effects, but the system achieved the target pharmaceuticals removal in this matrix. Additionally, the analysis of environmental impact using a life cycle assessment unraveled that the carbocatalytic process had a carbon footprint of 2.87 Kg CO2-Eq, with the biochar preparation (which involves the use of ZnCl2 and electric energy consumption) as the main hotspot in the process.

Kinetics, isotherms, effect of structure, and computational analysis during the removal of three representative pharmaceuticals from water by adsorption using a biochar obtained from oil palm fiber.

Acetaminophen (ACE), cephalexin (CPX), and valsartan (VAL) are recognized water pollutants, which can be removed by adsorption. Herein, the removal of these pharmaceuticals using a biochar (BP), prepared from oil palm fiber, was tested. It was studied the structural effects of the pharmaceuticals and biochar on the adsorption process supported by experimental and computational results, plus characterizations of the material. The biochar has 76.05 m2 g-1 of surficial area, and carboxylic groups (1.343 mmol g-1) predominantly. The maximum adsorption uptakes were 7.3, 7.9, and 23.85 mg g-1 for ACE, CPX, and VAL, respectively; following pseudo-second-order kinetics. The best pollutants removal was obtained at acidic pH (3.0). Computational analyses indicated that oxygenated groups of BP (able to generate H-bond interactions) influenced the adsorption of pharmaceuticals. It can be remarked that BP is a low-cost adsorbent synthesized easily from wastes, with high feasibility to remove pharmaceutical structures from water.