Injectable polyoxazoline grafted hyaluronic acid thermoresponsive hydrogels for biomedical applications.

Injectable thermosensitive hydrogels based on hyaluronic acid (HA) grafted with lower critical solution temperature (LCST) polyoxazoline (copolymers of poly(isopropyl-co-butyl oxazoline)) or P(iPrOx-co-BuOx) have been elaborated with tunable solution/gel temperature transitions and gel state elastic modulus. A suitable HA-g-P(iPrOx-co-BuOx-67/33)-0.10 sample with an iPrOx/BuOx ratio of 67/33, a polymerization degree (DP) of 25, a substitution degree (DS) of 10%, and displaying thermally induced gelling character with elastic (G') and viscous (G'') moduli crossover points at 25 °C and a G' at 37 °C around 80 Pa has been chosen for medical application. Hydrogels obtained with HA-g-P(iPrOx-co-BuOx-67/33)-0.10 exhibited high stability at 37 °C and excellent injectability properties with full and quick reversibility. The incorporation of a secondary network (HA), until 35 wt%, into the thermosensitive hydrogel also demonstrated very good stability and injectability.

In vitro evaluation of NA1-115-7-loaded nanoemulsions, an MCL-1-specific inhibitor of natural origin, intended to treat B-cell lymphoproliferative disorders after oral administration.

MCL-1, an anti-apoptotic member of the BCL-2 protein family, is overexpressed in many types of cancer and contributes to chemotherapy resistance. The drimane derivative NA1-115-7 is a natural compound isolated from Zygogynum pancheri that can be considered as a very promising lead for treating MCL-1-dependent hematological malignancies. As this drug suffers from low stability in acidic conditions and poor aqueous solubility, we evaluated the potential oral use of NA1-115-7 by encapsulating it in lipid nanoemulsions (NA-NEs) prepared by spontaneous emulsification. NA-NEs showed a particle size of 41.9 ± 2.2 nm, PDI of 0.131 ± 0.016, zeta potential of -5.8 ± 3.4 mV, encapsulation efficiency of approximately 100 % at a concentration of 24 mM. The stability of NA-1-115-7 was sixfold higher than that of the unencapsulated drug in simulated gastric fluid. NA-NEs significantly restored apoptosis and halved the effective doses of NA1-115-7 on BL2, a Burkitt lymphoma cell line, without toxicity in normal cells. Such a drug-delivery system appears to be particularly interesting for the oral administration of NA1-115-7, as it improves its solubility and stability, as well as efficacy, by reducing the therapeutic dose, making it possible to further consider in-vivo studies of this promising drug in BL2 xenografted mice.

NA1-115-7, from Zygogynum pancheri, is a new selective MCL-1 inhibitor inducing the apoptosis of hematological cancer cells but non-toxic to normal blood cells or cardiomyocytes.

The overexpression of antiapoptotic members (BCL-2, BCL-xL, MCL-1, etc.) of the BCL-2 family contributes to tumor development and resistance to chemotherapy or radiotherapy. Synthetic inhibitors targeting these proteins have been developed, and some hematological malignancies are now widely treated with a BCL-2 inhibitor (venetoclax). However, acquired resistance to venetoclax or chemotherapy drugs due to an upregulation of MCL-1 has been observed, rendering MCL-1 an attractive new target for treatment. Six MCL-1 inhibitors (S64315, AZD-5991, AMG-176, AMG-397, ABBV-467 and PRT1419) have been evaluated in clinical trials since 2016, but some were affected by safety issues and none are currently used clinically. There is, therefore, still a need for alternative molecules. We previously described two drimane derivatives as the first covalent BH3 mimetics targeting MCL-1. Here, we described the characterization and biological efficacy of one of these compounds (NA1-115-7), isolated from Zygogynum pancheri, a plant belonging to the Winteraceae family. NA1-115-7 specifically induced the apoptosis of MCL-1-dependent tumor cells, with two hours of treatment sufficient to trigger cell death. The treatment of lymphoma cells with NA1-115-7 stabilized MCL-1, disrupted its interactions with BAK, and rapidly induced apoptosis through a BAK- and BAX-mediated process. Importantly, a similar treatment with NA1-115-7 was not toxic to erythrocytes, peripheral blood mononuclear cells, platelets, or cardiomyocytes. These results highlight the potential of natural products for use as specific BH3 mimetics non-toxic to normal cells, and they suggest that NA1-115-7 may be a promising tool for use in cancer treatment.

How nano-engineered delivery systems can help marketed and repurposed drugs in Alzheimer's disease treatment?

Given the continual increase in the number of patients and the lack of curative treatment, the development of new therapies to treat Alzheimer's disease (AD) is becoming ever more urgent. In this review, we summarize the most promising preclinical studies in, and the significant benefits offered by, nanocarriers to realize the full potential of marketed drugs and identify repurposed drugs. No clinical trials have yet been conducted on nanocarriers for drug repurposing in AD. However, recent preclinical results suggest that nanocarriers could overcome the bioavailability and/or selectivity issues of repurposed drugs, improving their therapeutic efficacy.

Active Targeted Nanoemulsions for Repurposing of Tegaserod in Alzheimer's Disease Treatment.

BACKGROUND AND PURPOSE: The activation of 5-HT4 receptors with agonists has emerged as a valuable therapeutic strategy to treat Alzheimer's disease (AD) by enhancing the nonamyloidogenic pathway. Here, the potential therapeutic effects of tegaserod, an effective agent for irritable bowel syndrome, were assessed for AD treatment. To envisage its efficient repurposing, tegaserod-loaded nanoemulsions were developed and functionalized by a blood-brain barrier shuttle peptide. RESULTS: The butyrylcholinesterase inhibitory activity of tegaserod and its neuroprotective cellular effects were highlighted, confirming the interest of this pleiotropic drug for AD treatment. In regard to its drugability profile, and in order to limit its peripheral distribution after IV administration, its encapsulation into monodisperse lipid nanoemulsions (Tg-NEs) of about 50 nm, and with neutral zeta potential characteristics, was performed. The stability of the formulation in stock conditions at 4 °C and in blood biomimetic medium was established. The adsorption on Tg-NEs of peptide-22 was realized. The functionalized NEs were characterized by chromatographic methods (SEC and C18/HPLC) and isothermal titration calorimetry, attesting the efficiency of the adsorption. From in vitro assays, these nanocarriers appeared suitable for enabling tegaserod controlled release without hemolytic properties. CONCLUSION: The developed peptide-22 functionalized Tg-NEs appear as a valuable tool to allow exploration of the repurposed tegaserod in AD treatment in further preclinical studies.

Drimane Derivatives as the First Examples of Covalent BH3 Mimetics that Target MCL-1.

Drimane sesquiterpenoid dialdehydes are natural compounds with antiproliferative properties. Nevertheless, their mode of action has not yet been discovered. Herein, we demonstrate that various drimanes are potent inhibitors of MCL-1 and BCL-xL, two proteins of the BCL-2 family that are overexpressed in various cancers, including lymphoid malignancies. Subtle changes in their structure significantly modified their activity on the target proteins. The two most active compounds are MCL-1 selective and bind in the BH3 binding groove of the protein. Complementary studies by NMR spectroscopy and mass spectrometry analyses, but also synthesis, showed that they covalently inhibit MCL-1 though the formation of a pyrrole adduct. In addition, cytotoxic assays revealed that these two compounds show a cytotoxic selectivity for BL2, a MCL-1/BCL-xL-dependent cell line and induce apoptosis.

Relevant Physicochemical Methods to Functionalize, Purify, and Characterize Surface-Decorated Lipid-Based Nanocarriers.

Surface functionalization of lipid-based nanocarriers (LBNCs) with targeting ligands has attracted huge interest in the field of nanomedicines for their ability to overcome some physiological barriers and their potential to deliver an active molecule to a specific target without causing damage to healthy tissues. The principal objective of this review is to summarize the present knowledge on LBNC decoration used for biomedical applications, with an emphasis on the ligands used, the functionalization approaches, and the purification methods after ligand corona formation. The most potent experimental techniques for the LBNC surface characterization are described. The potential of promising methods such as nuclear magnetic resonance spectroscopy and isothermal titration calorimetry to characterize ligand surface corona is also outlined.

Design of Non-Haemolytic Nanoemulsions for Intravenous Administration of Hydrophobic APIs.

Among advanced formulation strategies, nanoemulsions are considered useful drug-delivery systems allowing to improve the solubility and the bioavailability of lipophilic drugs. To select safe excipients for nanoemulsion formulation and to discard any haemolytic potential, an in vitro miniaturized test was performed on human whole blood. From haemolysis results obtained on eighteen of the most commonly used excipients, a medium chain triglyceride, a surfactant, and a solubilizer were selected for formulation assays. Based on a design of experiments and a ternary diagram, the feasibility of nanoemulsions was determined. The composition was defined to produce monodisperse nanodroplets with a diameter of either 50 or 120 nm, and their physicochemical properties were optimized to be suitable for intravenous administration. These nanoemulsions, stable over 21 days in storage conditions, were shown to be able to encapsulate with high encapsulation efficiency and high drug loading, up to 16% (w/w), two water practically insoluble drug models: ibuprofen and fenofibrate. Both drugs may be released according to a modulable profile in sink conditions. Such nanoemulsions appear as a very promising and attractive strategy for the efficient early preclinical development of hydrophobic drugs.

Pharmacotechnical Development of a Nasal Drug Delivery Composite Nanosystem Intended for Alzheimer's Disease Treatment.

Direct nose-to-brain delivery has been raised as a non-invasive powerful strategy to deliver drugs to the brain bypassing the blood-brain barrier (BBB). This study aimed at preparing and characterizing an innovative composite formulation, associating the liposome and hydrogel approaches, suitable for intranasal administration. Thermosensitive gel formulations were obtained based on a mixture of two hydrophilic polymers (Poloxamer 407, P407 and Poloxamer 188, P188) for a controlled delivery through nasal route via liposomes of an active pharmaceutical ingredient (API) of potential interest for Alzheimer's disease. The osmolarity and the gelation temperature (T° sol-gel) of formulations, defined in a ternary diagram, were investigated by rheometry and visual determination. Regarding the issue of assays, a mixture composed of P407/P188 (15/1%, w/w) was selected for intranasal administration in terms of T° sol-gel and for the compatibility with the olfactory mucosal (280 ± 20 mOsmol, pH 6). Liposomes of API were prepared by the thin film hydration method. Mucoadhesion studies were performed by using mucin disc, and they showed the good natural mucoadhesive characteristics of in situ gel formulations, which increased when liposomes were added. The study demonstrated successful pharmacotechnical development of a promising API-loaded liposomes in a thermosensitive hydrogel intended for nasal Alzheimer's disease treatment.

A comparison of different strategies for antimicrobial peptides incorporation onto/into lipid nanocapsules.

Aim: Over the last decade, antimicrobial peptides (AMPs) have emerged as a promising alternative for the treatment of various infections. The aim of this work is to explore the potential of lipid nanocapsules for the delivery of AMPs. Three approaches were compared in terms of encapsulation efficiency, peptide activity and protection against proteases: peptide encapsulation, surface adsorption or covalent attachment of three selected AMPs. Results: A potentiation of the antimicrobial activity and a partial protection of the peptides after adsorption were demonstrated compared with native peptides. Conversely, encapsulation allowed better peptide stability, correlated with higher encapsulation efficiencies and a preservation of the activity. Finally, the covalent attachment strategy turned out to be less conclusive due to peptide inactivation. Conclusion: In brief, a lipid nanocapsule-based platform appears suitable to deliver AMPs.

Reverse micelle-lipid nanocapsules: a novel strategy for drug delivery of the plectasin derivate AP138 antimicrobial peptide.

INTRODUCTION: Resistance to traditional antibiotics is an increasingly serious problem. Antimicrobial peptides (AMPs) have emerged as a new therapeutic class with great potential against infectious diseases, as they are less prone to induce resistance. Nanotechnology-based delivery strategies can improve the efficiency and stability of AMPs, particularly against proteolytic degradation. Lipid nanocapsules (LNCs) are a new generation of biomimetic nanocarriers and were used in this study to deliver peptides. METHODS: AMP-loaded reverse micelles (RM) were developed and incorpo rated into LNCs by the phase inversion process and the antimicrobial activity of the AMPs-loaded LNC was evaluated by the minimum inhibitory concentration method. We studied the activity of AMP solutions and AMP-loaded LNCs against Gram-positive and Gram-negative bacterial strains and then evaluated the encapsulation of a new cationic AMP called AP138. Finally, we analyzed the effect of enzymatic attack on AP138 and AP138-RM-LNCs after incubation with trypsin. RESULTS: AP138 was efficiently encapsulated in the LNCs (encapsulation efficiency = 97.8% at a drug loading of 0.151%), resulting in protection against degradation by proteases and the preservation of antimicrobial activity against Staphylococcus aureus, including methicillin-resistant Staphylococcus aureus. CONCLUSION: This study shows that RM-LNCs are an excellent candidate system to deliver AMPs.

Understanding the adsorption of salmon calcitonin, antimicrobial peptide AP114 and polymyxin B onto lipid nanocapsules.

The adsorption of therapeutic molecules, e.g., peptides, onto nanocarriers is influenced by the properties of the carrier, adsorbed molecule and continuous phase. Hence, through changes in the composition of the nanocarrier and the medium, it should be possible to tune the system to make it capable of efficiently adsorbing peptides. The adsorption of calcitonin, antimicrobial peptide AP114 and polymyxin B onto lipid nanocapsules was investigated. The adsorption data were fitted to a Langmuir isotherm. Dynamic light scattering and laser Doppler velocimetry were used to investigate the changes in the hydrodynamic diameter and zeta potential, respectively, of the nanocarrier. The peptide adsorption was primarily governed by electrostatic forces; however, even without the presence of an ionisable surfactant, a significant amount of each tested molecule was adsorbed due to the enormous surface area of the nanocarriers and to peptide-nanocarrier interactions. The addition of an ionisable lipophilic surfactant, lecithin, improved the adsorption yield, which reached values of up to 100%. The adsorption yield and the properties of the nanocarrier, particularly the zeta potential, depended on the carrier and peptide concentrations and their mixing ratio. The adsorption of all tested molecules obeyed the Langmuir model over a limited concentration range.

Lipid-based nanoformulations for peptide delivery.

Nanoformulations have attracted a lot of attention because of their size-dependent properties. Among the array of nanoformulations, lipid nanoformulations (LNFs) have evoked increasing interest because of the advantages of their high degree of biocompatibility and versatility. The performance of lipid nanoformulations is greatly influenced by their composition and structure. Therapeutic peptides represent a growing share of the pharmaceutical market. However, the main challenge for their development into commercial products is their inherent physicochemical and biological instability. Important peptides such as insulin, calcitonin and cyclosporin A have been incorporated into LNFs. The association or encapsulation of peptides within lipid-based carriers has shown to protect the labile molecules against enzymatic degradation. This review describes strategies used for the formulation of peptides and some methods used for the assessment of association efficiency. The advantages and drawbacks of such carriers are also described.

Mucus models to evaluate nanomedicines for diffusion.

In the fast-growing field of nanomedicine, mucus is often the first barrier encountered by drug products in the body, and can be the only barrier if it is not overcome by the drug delivery system. Thus, there is a need to design new nanomedicines that are able to diffuse easily across mucus to reach their pharmacological targets. In this design process, mucus diffusion studies are mandatory and have an important role in the selection of the best drug candidates. However, there is currently no standard procedure for diffusion studies across mucus. In this Foundation Review, we discuss the differences observed within mucus models and experimental protocols in diffusion studies, with an emphasis on nanomedicine diffusion.

Development of 2D and 3D mucus models and their interactions with mucus-penetrating paclitaxel-loaded lipid nanocapsules.

PURPOSE: To study, diffusion through mucus (3D model) of different formulations of paclitaxel loaded lipid nanocapsules (Ptx-LNCs), to interpret the results in the light of LNC behavior at air-mucus interface (2D model). METHODS: LNC surface properties were modified with chitosan or poly(ethylene glycol) (PEG) coatings of different size (PEG 2,000 to 5,000 Da) and surface charges. LNC diffusion through 446 µm pig intestinal mucus layer was studied using Transwell(®). LNCs were spread at the air-water-mucus interface then interfacial pressure and area changes were monitored and the efficiency of triglyceride (TG) inclusion was determined. RESULTS: Ptx-LNCs of surface charges ranging from -35.7 to +25.3 mV were obtained with sizes between 56.2 and 75.1 nm. The diffusion of paclitaxel in mucus was improved after encapsulation in neutral or positively charged particles (p < 0.05 vs Taxol(®)). No significative difference was observed in the 2,000-5,000 PEG length for diffusion both on the 2D or 3D models. On 2D model positive or neutral LNCs interacted less with mucus. Highest efficiency of TG inclusion was observed for particles with smallest PEG length. CONCLUSIONS: The results obtained with 2D and 3D model allowed us to select the best candidates for in vivo studies (neutral or positive LNCs with smaller PEG length).

Fate of paclitaxel lipid nanocapsules in intestinal mucus in view of their oral delivery.

The bioavailability of paclitaxel (Ptx) has previously been improved via its encapsulation in lipid nanocapsules (LNCs). In this work, the interactions between LNCs and intestinal mucus are studied because they are viewed as an important barrier to successful oral delivery. The rheological properties of different batches of pig intestinal mucus were studied under different conditions (the effect of hydration and the presence of LNCs). Fluorescence resonance energy transfer (FRET) was used to study the stability of LNCs in mucus at 37°C for at least 3 hours. Diffusion through 223, 446, and 893 µm mucus layers of 8.4, 16.8, and 42 µg/mL Ptx formulated as Taxol® (Bristol-Myers Squibb, Rueil-Malmaison, France) or encapsulated in LNCs (Ptx-LNCs) were investigated. The effect of the size of the LNCs on their diffusion was also investigated (range, 25-110 nm in diameter). Mucus behaves as a non-Newtonian gel with rheofluidifying properties and a flow threshold. The viscous (G″) and elastic (G') moduli and flow threshold of the two mucus batches varied with water content, but G' remained below G″. LNCs had no effect on mucus viscosity and flow threshold. The FRET efficiency remained at 78% after 3 hours. Because the destruction of the LNCs would lead to a FRET efficiency below 25%, these results suggest only a slight modification of LNCs after their contact with mucus. The diffusion of Taxol® and Ptx-LNCs in mucus decreases if the mucus layer is thicker. Interestingly, the apparent permeability across mucus is higher for Ptx-LNCs than for Taxol® for drug concentrations of 16.8 and 42 µg/mL Ptx (P<0.05). The diffusion of Ptx-LNCs through mucus is not size-dependent. This study shows that LNCs are stable in mucus, do not change mucus rheological properties, and improve Ptx diffusion at low concentrations, thus making these systems good candidates for Ptx oral delivery. The study of the physicochemical interaction between the LNC surface and its diffusion in mucus is now envisioned.