Distinctive Imaging Characteristics of Retinal and Cerebral Vessels between Central and Branch Retinal Vein Occlusion by MRI and AI-Based Image Analyzer.

Retinal vessels have been good predictive and prognostic imaging biomarkers for systemic or eye diseases. Numerous studies have shown that the two retinal vein occlusion entities may correlate with cardiovascular and cerebrovascular events or primary open-angle glaucoma. This study aims to investigate if there is a disparity in the correlations between branch RVO (BRVO) and central RVO (CRVO) with systemic disorders or POAG, thus explaining the pathogenic difference between BRVO and CRVO. This retrospective case-control study enrolled 59 RVO subjects (118 eyes), including 25 CRVO and 34 BRVO subjects, who received routine eye and brain MRI examinations. The geometric characteristics of the caliber of the retinal and cerebral blood vessels and the optic nerve subarachnoid space width (ONSASW) were measured. Multivariable logistic regression analysis showed that ONSASW at 3 mm behind the globe (p = 0.044) and the relative retinal venular calibers (p = 0.031) were independent risk factors for the CRVO-affected eyes group in comparison with the BRVO-affected eyes group after adjusting for age, duration of hypertension, BMI, and IOP. In the CRVO-affected eyes, narrower relative retinal arteriolar calibers (p = 0.041) and wider relative venular calibers (p = 0.011) were independent risk factors compared with the CRVO-contralateral normal eyes when adjusting for IOP. We concluded that BRVO may be more associated with cerebrovascular diseases, and CRVO may be correlated with primary angle glaucoma. The geometric characteristics difference between the retinal and cerebrovascular may explain the pathological difference between CRVO and BRVO.

Application of Bone Marrow-Derived Macrophages Combined with Bone Mesenchymal Stem Cells in Dual-Channel Three-Dimensional Bioprinting Scaffolds for Early Immune Regulation and Osteogenic Induction in Rat Calvarial Defects.

The host immune response to biomaterials is critical for determining scaffold fate and bone regeneration outcomes. Three-dimensional (3D) bioprinted scaffolds encapsulated with living cells can improve the inflammatory microenvironment and further accelerate bone repair. Here, we screened and adopted 8% methacrylamidated gelatin (GelMA)/1% methacrylamidated hyaluronic acid (HAMA) as the encapsulation system for rat bone marrow-derived macrophages (BMMs) and 3% Alginate/0.5 mg/mL graphene oxide (GO) as the encapsulation system for rat bone mesenchymal stem cells (BMSCs), thus forming a dual-channel bioprinting scaffold. The 8% GelMA/1% HAMA/3% Alginate/0.5 mg/mL GO (8/1/3/0.5) group could form a scaffold with a stable structure, good mechanical properties, and satisfied biocompatibility. When exploring the crosstalk between BMMs and BMSCs in vitro, we found that BMSCs could promote the polarization of BMMs to M2 type at the early stage, reduce the pro-inflammatory gene expression, and increase anti-inflammatory gene expression; conversely, BMMs can promote the osteogenic differentiation of BMSCs. In addition, in the model of rat calvarial defects, the dual-channel scaffold encapsulated with BMMs and BMSCs was more effective than the single-cell scaffold and the acellular scaffold. The paracrine of BMMs and BMSCs in the biodegradable dual-channel scaffold effectively promoted the M2-type polarization of macrophages in the microenvironment of early bone defects, avoided excessive inflammatory responses, and further promoted bone repair. In conclusion, our findings suggested that using 3D bioprinting to simultaneously encapsulate two primary cells of BMMs and BMSCs in a dual-channel system may be an effective way to promote bone repair from the perspective of early immune regulation and late induction of osteogenesis.

Synthesis of thermally robust benzimidazolone-based wholly aromatic polyketones.

A series of wholly aromatic polyketones bearing benzimidazolone moieties (PK-BI) were synthesized via N-C coupling polycondensation. Calcium carbonate coupled with potassium carbonate was used for the first time to achieve a high molecular weight, with T g of the polymer as high as 299 °C. The polymer structure was confirmed by solid state 13C NMR and FT-IR. The thermal stability of wholly aromatic polyketones with a benzimidazolone unit in the main chain was significantly improved, being higher than those of PEEKs and other amorphous PAEKs, proved by thermogravimetric analysis (TGA) and derivative thermogravimetric (DTG) analysis. The degradation activation energy (E k) values estimated by Flynn-Wall-Ozawa (FWO) and Kissinger methods were 260.33 kJ mol-1 and 282.57 kJ mol-1, respectively, which are higher than those of PEEKs.

New Insight of Circular RNAs in Human Musculoskeletal Diseases.

Circular RNAs (circRNAs), a novel group of noncoding RNAs, are present in most eukaryotic cells. Different from messenger RNAs, circRNAs have a covalently closed single-stranded stable structure and often act in cell type and tissue-specific manners, indicating that they can be used as biomarkers. With the advance of high-throughput RNA sequencing technology and bioinformatics, a large number of circRNAs have been identified in association with musculoskeletal diseases, but the functions of most circRNAs have not been clarified. circRNAs regulate biological processes by adsorbing microRNA as "sponges," binding to proteins, acting as transcriptional regulators, and participating in translation of proteins. In this study, we discuss the latest understanding of biogenesis and gene regulatory mechanisms of circRNAs with special emphasis on new targets for musculoskeletal disease diagnosis and clinical treatment.

Preparation of Amorphous Poly(aryl ether nitrile ketone) and Its Composites with Nano Hydroxyapatite for 3D Artificial Bone Printing.

PEEK had been used to fabricate artificial bones by 3D printing widely, but it expressed unsatisfactory interlayer performance of 3D printing and weak compatibility with nano hydroxyapatite(nHA) due to the limits of molecular structures. Here an amorphous poly(aryl ether ketone) for 3D bone printing, PEK-CN, was designed and synthesized via nucleophilic substitution from 4,4'-difluorobenzophenone, phenolphthalein and 2,6-dichlorobenzonitrile, which possessed much stronger interlayer strength due to van der Waals force between polar groups(-CNs). Specifically, the stronger interlayer strength resulted in lower porosity(3% with 100% infill rate) and more comparable mechanical properties(the maximum tensile strength was ∼110 MPa) to cortical bone. Importantly, PEK-CN had passed in vitro cytotoxicity testing and samples of human mandible and maxillary bones based on PEK-CN were printed by fused deposition modeling(FDM) successfully. Moreover, PEK-CN/nHA composites were obtained to enhance bioactivity of resin, and PEK-CN without limits of crystal lattices expressed excellent compatibility with nano hydroxyapatite. Our work provided a high performance resin for 3D bone printing, which would bring better solutions for artificial bone materials.

Bioinspired Modifications of PEEK Implants for Bone Tissue Engineering.

In recent years, polyetheretherketone (PEEK) has been increasingly employed as an implant material in clinical applications. Although PEEK is biocompatible, chemically stable, and radiolucent and has an elastic modulus similar to that of natural bone, it suffers from poor integration with surrounding bone tissue after implantation. To improve the bioactivity of PEEK, numerous strategies for functionalizing the PEEK surface and changing the PEEK structure have been proposed. Inspired by the components, structure, and function of bone tissue, this review discusses strategies to enhance the biocompatibility of PEEK implants and provides direction for fabricating multifunctional implants in the future.

Integrated bioinformatics analysis of miRNA expression in Ewing sarcoma and potential regulatory effects of miR-21 via targeting ALCAM/CD166.

MicroRNAs (miRNAs) play essential functions in pathogenesis of Ewing sarcoma (ES). However, the molecular mechanisms responsible for ES occurrence and development through the regulation of miRNAs remain largely unknown. This study is aimed to explore the differential expressed miRNAs and mRNAs that play vital roles in ES. GSE80201 miRNA and GSE68776 mRNA microarray dataset were selected to carry out a series of bioinformatics analysis such as GEO 2R, gene ontology, pathway enrichment analysis, Venn analysis and PPI network construction to predict hub genes. Furthermore, using quantitative real-time PCR, RNA interference and luciferase reporter assay we demonstrated that activated leukocyte cell adhesion molecule (ALCAM/CD166) is a direct target of miR-21-3p in human ES cell lines. Our results suggest that the miR-21/CD166 axis has the potential to serve as both diagnostic markers and therapeutic targets for ES.