Hyaluronic acid-based hydrogels loaded with chemoattractant and anticancer drug - new formulation for attracting and tackling glioma cells.

Over the last few years, significant interest has emerged in the development of localised therapeutic strategies for the treatment of glioblastoma (GBM). The concept of attracting and trapping residual tumour cells within a confined area to facilitate their eradication has developed progressively. Herein, we propose a new design of hyaluronic acid-based hydrogel which can be utilized as a matrix containing a soluble chemoattractant to attract residual glioma cells and chemotherapeutic agents to eradicate them in a less invasive and more efficient way compared to the currently available methods. Hydrogels were prepared at different crosslinking densities, e.g. low and high density, by crosslinking hyaluronic acid with various concentrations of adipic acid dihydrazide and U87MG GBM cell morphology, survival and CD44 expression were evaluated. As a proof-of-concept, hydrogels were loaded with a small peptide chemokine, human urotensin II (hUII), and the migration and survival of U87MG GBM cells were studied. Chemoattractant-containing hydrogels were also loaded with chemotherapeutic drugs to promote cell death in culture. The results showed that U87MG cells were able to invade the hydrogel network and to migrate in response to the chemoattractant hUII. In addition, in static condition, hydrogels loaded with doxorubicin demonstrated significant cytotoxicity leading to less than 80% U87MG cell viability after 48 hours when compared to the control sample. In addition, in in vitro invasive assays, it was originally shown that the chemoattractant effect of hUII can be effective before the cytotoxic action of doxorubicin on the U87MG cells trapped in the hydrogel. Our results provide new insights into a promising approach which can be readily translated in vivo for the treatment of one of the most devastating brain tumours.

Comprehensive framework for human health risk assessment of nanopesticides.

Nanopesticides are not only in an advanced state of research and development but have started to appear on the market. Industry and regulatory agencies need a consolidated and comprehensive framework and guidance for human health risk assessments. In this perspective we develop such a comprehensive framework by exploring two case studies from relevant product types: an active ingredient delivered with a nanocarrier system, and a nanoparticle as an active ingredient. For a nanocarrier system, three entities are tracked during the assessment: the nanocarrier-active ingredient complex, the empty nanocarrier remaining after the complete release of the active ingredient, and the released active ingredient. For the nanoparticle of pure active ingredient, only two entities are relevant: the nanoparticle and the released ions. We suggest important adaptations of the existing pesticide framework to determine the relevant nanopesticide entities and their concentrations for toxicity testing. Depending on the nature of the nanopesticides, additional data requirements, such as those pertaining to durability in biological media and potential for crossing biological barriers, have also been identified. Overall, our framework suggests a tiered approach for human health risk assessment, which is applicable for a range of nanopesticide products to support regulators and industry in making informed decisions on nanopesticide submissions. Brief summaries of suitable methods including references to existing standards (if available) have been included together with an analysis of current knowledge gaps. Our study is an important step towards a harmonized approach accepted by regulatory agencies for assessing nanopesticides.

Nanomedicines and microneedles: a guide to their analysis and application.

The fast-advancing progress in the research of nanomedicine and microneedle applications in the past two decades has suggested that the combination of the two concepts could help to overcome some of the challenges we are facing in healthcare. They include poor patient compliance with medication and the lack of appropriate administration forms that enable the optimal dose to reach the target site. Nanoparticles as drug vesicles can protect their cargo and deliver it to the target site, while evading the body's defence mechanisms. Unfortunately, despite intense research on nanomedicine in the past 20 years, we still haven't answered some crucial questions, e.g. about their colloidal stability in solution and their optimal formulation, which makes the translation of this exciting technology from the lab bench to a viable product difficult. Dissolvable microneedles could be an effective way to maintain and stabilise nano-sized formulations, whilst enhancing the ability of nanoparticles to penetrate the stratum corneum barrier. Both concepts have been individually investigated fairly well and many analytical techniques for tracking the fate of nanomaterials with their precious cargo, both in vitro and in vivo, have been established. Yet, to the best of our knowledge, a comprehensive overview of the analytical tools encompassing the concepts of microneedles and nanoparticles with specific and successful examples is missing. In this review, we have attempted to briefly analyse the challenges associated with nanomedicine itself, but crucially we provide an easy-to-navigate scheme of methods, suitable for characterisation and imaging the physico-chemical properties of the material matrix.

Polycarboxylated Dextran as a Multivalent Linker: Synthesis and Target Recognition of the Antibody-Nanoparticle Bioconjugates in PBS and Serum.

Nanoparticles (NPs) functionalized with antibodies on their surface are used in a wide range of research applications. However, the bioconjugation chemistry between the antibodies and the surface of nanoparticles can be very challenging, often accompanied by several undesired effects such as nanoparticle aggregation, antibody denaturation, or poor target recognition of the surface-bound antibodies. Here, we report on a synthesis of fluorescent silica nanoparticle-antibody (NP-Ab) conjugates, in which polycarboxylated dextran is used as the multivalent linker. First, we present a synthetic methodology to prepare polycarboxylated dextrans with molecular weights of 6, 40, and 70 kDa. Second, we used water-soluble, polycarboxylated dextrans as a multivalent spacers/linkers to immobilize antibodies onto fluorescent silica nanoparticles. The prepared NP-Ab conjugates were tested in a direct binding assay format in both phosphate-buffered saline buffer and whole serum to investigate the role of the spacer/linker in the capacity of the NP-Ab to specifically recognize their target in "clean" and also in complex media. We have compared the dextran conjugates with two standards: (a) NP-Ab with antibodies attached on the surface of nanoparticles through the classical physical adsorption method and (b) NP-Ab where an established poly(amidoamine) (PAMAM) dendrimer was used as the linker. Our results showed that the polycarboxylated 6 kDa dextran facilitates antibody immobilization efficiency of nearly 92%. This was directly translated into the improved molecular recognition of the NP-Ab, which was measured by a direct binding assay. The signal-to-noise ratio in buffered solution for the 6 kDa dextran NP-Ab conjugates was 81, nearly 3 times higher than that of PAMAM G4.5 conjugates and 9 times higher than the physically adsorbed NP-Ab sample. In whole serum, the effect of 6 kDa dextran was more hindered due to the formation of protein corona but the signal-to-noise ratio was at least double that of the physically adsorbed NP-Ab conjugates.

Coumarin-based, switchable fluorescent substrates for enzymatic bacterial detection.

Enzymatically-switchable fluorescent substrates, such as the commercially available 4-methyl umbelliferones (4-MU) are used as standard indicators of enzymatic activity for the detection of various microorganisms and pathogens. However, a major disadvantage of 4-MU is its relatively high pKa leading to only partial dissociation of the fluorescent anion under the conditions where the enzymes are most effective (pH 6-6.5). Here we present a method for new, enzymatically-switchable, fluorescent substrates with improved photo-physico/chemical properties. The lead derivative, 4-AAU, shows excellent solubility in aqueous media (0.81 mg/mL) when compared to 4-MU (0.16 mg/mL), significantly improved quantum yield and wider dynamic range of its fluorescence properties. The corresponding bacterial substrate ß-4-AAUG showed superior selectivity in the detection of clinically relevant amounts of E. coli, Enterococcus and K. pneumonia (1 CFU). The fluorescence intensity of ß-4-AAUG was almost 5 times higher than that of the standard, the detection was possible in reasonably short time (∼ 2.5 h) and with excellent sensitivity.

pH-Dependent silica nanoparticle dissolution and cargo release.

The dissolution of microporous silica nanoparticles (NP) in aqueous environments of different biologically relevant pH was studied in order to assess their potential as drug delivery vehicles. Silica NPs, loaded with fluorescein, were prepared using different organosilane precursors (tetraethoxysilane, ethyl triethoxysilane or a 1:1 molar ratio of both) and NP dissolution was evaluated in aqueous conditions at pH 4, pH 6 and pH 7.4. These conditions correspond to the acidity of the intracellular environment (late endosome, early endosome, cytosol respectively) and gastrointestinal tract ('fed' stomach, duodenum and jejunum respectively). All NPs degraded at pH 6 and pH 7.4, while no dissolution was observed at pH 4. NP dissolution could be clearly visualised as mesoporous hollows and surface defects using electron microscopy, and was supported by UV-vis, fluorimetry and DLS data. The dissolution profiles of the NPs are particularly suited to the requirements of oral drug delivery, whereby NPs must resist degradation in the harsh acidic conditions of the stomach (pH 4), but dissolve and release their cargo in the small intestine (pH 6-7.4). Particle cores made solely of ethyl triethoxysilane exhibited a 'burst release' of encapsulated fluorescein at pH 6 and pH 7.4, whereas NPs synthesised with tetraethoxysilane released fluorescein in a more sustained fashion. Thus, by varying the organosilane precursor used in NP formation, it is possible to modify particle dissolution rates and tune the release profile of encapsulated fluorescein. The flexible synthesis afforded by silica NPs to achieve pH-responsive dissolution therefore makes this class of nanomaterial an adaptable platform that may be well suited to oral delivery applications.

Improving colloidal stability of silica nanoparticles when stored in responsive gel: application and toxicity study.

When silica nanoparticles (SiNP) are stored in aqueous solution, even for few hours, they have a tendency to form agglomerates and therefore adapt inhomogeneous structures. Here we present a very practical method to store SiNP in responsive hydrogel. We have confirmed that SiNP kept in the responsive hydrogel do not undergo through undesirable morphological changes and while in storage they maintain their excellent colloidal stability. The effect of SiNP hollowing (i.e. dissolution of the core of the particles that leaves empty cavity inside) was significantly inhibited in the hydrogel, which is a critical feature for any nano-medical applications (e.g. controlled drug release). To demonstrate the applicability of the hydrogel-storing concept within a biologically relevant context, in this work we have evaluated the toxicological effects of the responsive SiNP-gel formulation in a model in vitro (human cell line U87GM and hemocompatibility using red blood cells) and ex ovo (hen's egg test) experiments. Particles stored in the gel as well as the pure gel did not affect the hemocompatibility (hemolysis and erythrocyte aggregation) up to a concentration of 100 µg/mL. Furthermore, systemic injections into the blood circulation of the chick area vasculosa confirmed the biocompatibility in a more complex biological environment. All evaluated toxicological values (hemorrhage, thrombosis, vascular lysis, and lethality) were comparable with the negative control, and no differences in toxicological response could be observed between the SiNP stored in hydrogel and the control nanoparticles stored in the solution.

Surface engineering of poly(methylmethacrylate): Effects on fluorescence immunoassay.

The authors present surface engineering modifications through chemistry of poly(methylmethacrylate) (PMMA) that have dramatic effects on the result of surface-bound fluorescence immunoassays, both for specific and nonspecific signals. The authors deduce the most important effect to be clustering of antibodies on the surface leading to significant self-quenching. Secondary effects are attributable to the formation of sparse multilayers of antibody. The authors compare PMMA as an antibody support surface with ultraviolet-ozone oxidized PMMA and also to substrates that were, after the oxidation, surface modified by a four-unit poly(ethyleneglycol) carboxylic acid (PEG4), a branched tricarboxylic acid, and a series of carboxylic acid-terminated dendrimers, from generation 1.5 to 5.5. Fluorescence immunoassay and neutron reflectometry were used to compare the apparent antibody surface loading, antigen binding and nonspecific binding on these various surfaces using anti-human IgG as a model antibody, chemically coupled to the surface by amide formation. Simple physical adsorption of the antibody on PMMA resulted in a thick antibody multilayer with small antigen binding capacity. On the carboxylated surfaces, with chemical coupling, a simple monolayer was formed. The authors deduce that antibody clustering was driven by conformational inflexibility and high carboxylate density. The PEG4-modified surface was the most conformationally flexible. The dendrimer-modified interfaces showed a collapse and densification. In fluorescence immunoassay, the optimal combination of high specific and low nonspecific fluorescence signal was found for the G3.5 dendrimer.

Simultaneous Measurement of the Dissolution Kinetics of Responsive DNA Hydrogels at Multiple Length Scales.

Recent years have seen increasing study of stimulus-responsive hydrogels constructed from aptamer-connected DNA building blocks. Presumably due to a lack of simple, quantitative tools with which to measure gel responsiveness, however, the literature describing these materials is largely qualitative. In response, we demonstrate here simple, time-resolved, multiscale methods for measuring the response kinetics of these materials. Specifically, by employing trace amounts of fluorophore-quencher labeled cross-linkers and the rheology of entrapped fluorescent particles, we simultaneously measure dissolution at molecular, hundred-nanometer, and hundred-micron length-scales. For our test-bed system, an adenine-responsive hydrogel, we find biphasic response kinetics dependent on both effector concentration and depth within the gel and a dissolution pattern uniform at scales longer than a few times the monomer-monomer distance. Likewise, we find that, in agreement with theoretical predictions, dissolution kinetics over the hundred nanometer length scale exhibit a power-law-like dependence on the fraction of disrupted cross-links before a distinct crossover from solid-like to liquid-like behavior.

Simple approach to study biomolecule adsorption in polymeric microfluidic channels.

Herein a simple analytical method is presented for the characterization of biomolecule adsorption on cyclo olefin polymer (COP, trade name: Zeonor(®)) substrates which are widely used in microfluidic lab-on-a-chip devices. These Zeonor(®) substrates do not possess native functional groups for specific reactions with biomolecules. Therefore, depending on the application, such substrates must be functionalized by surface chemistry methods to either enhance or suppress biomolecular adsorption. This work demonstrates a microfluidic method for evaluating the adsorption of antibodies and oligonucleotides surfaces. The method uses centrifugal microfluidic flow-through chips and can easily be implemented using common equipment such as a spin coater. The working principle is very simple. The user adds 40 L of the solution containing the sample to the starting side of a microfluidic channel, where it is moved through by centrifugal force. Some molecules are adsorbed in the channel. The sample is then collected at the other end in a small reservoir and the biomolecule concentration is measured. As a pilot application, we characterized the adsorption of goat anti-human IgG and a 20-mer DNA on Zeonor(®), and on three types of functionalized Zeonor: 3-aminopropyltriethoxysilane (APTES) modified surface with mainly positive charge, negatively charged surface with immobilized bovine serum albumin (BSA), and neutral, hydrogel-like film with polyethylene glycol (PEG) characteristics. This simple analytical approach adds to the fundamental understanding of the interaction forces in real, microfluidic systems. This method provides a straightforward and rapid way to screen surface compositions and chemistry, and relate these to their effects on the sensitivity and resistance to non-specific binding of bioassays using them. In an additional set of experiments, the surface area of the channels in this universal microfluidic chip was increased by precision milling of microscale trenches. This modified surface was then coated with APTES and tested for its potential to serve as a unique protein dilution feature.

Inhibition of neuroblastoma tumor growth by targeted delivery of microRNA-34a using anti-disialoganglioside GD2 coated nanoparticles.

BACKGROUND: Neuroblastoma is one of the most challenging malignancies of childhood, being associated with the highest death rate in paediatric oncology, underlining the need for novel therapeutic approaches. Typically, patients with high risk disease undergo an initial remission in response to treatment, followed by disease recurrence that has become refractory to further treatment. Here, we demonstrate the first silica nanoparticle-based targeted delivery of a tumor suppressive, pro-apoptotic microRNA, miR-34a, to neuroblastoma tumors in a murine orthotopic xenograft model. These tumors express high levels of the cell surface antigen disialoganglioside GD2 (GD(2)), providing a target for tumor-specific delivery. PRINCIPAL FINDINGS: Nanoparticles encapsulating miR-34a and conjugated to a GD(2) antibody facilitated tumor-specific delivery following systemic administration into tumor bearing mice, resulted in significantly decreased tumor growth, increased apoptosis and a reduction in vascularisation. We further demonstrate a novel, multi-step molecular mechanism by which miR-34a leads to increased levels of the tissue inhibitor metallopeptidase 2 precursor (TIMP2) protein, accounting for the highly reduced vascularisation noted in miR-34a-treated tumors. SIGNIFICANCE: These novel findings highlight the potential of anti-GD(2)-nanoparticle-mediated targeted delivery of miR-34a for both the treatment of GD(2)-expressing tumors, and as a basic discovery tool for elucidating biological effects of novel miRNAs on tumor growth.

Ultrathin and smooth poly(methyl methacrylate) (PMMA) films for label-free biomolecule detection with total internal reflection ellipsometry (TIRE).

Ultrathin poly(methyl methacrylate) PMMA films were prepared on gold substrates by spin coating PMMA dissolved in toluene. By varying the concentration of PMMA, spin coating speed and curing condition, we obtained very smooth and ultrathin PMMA films. The PMMA films were transformed into highly reactive film containing carboxylic functionalities using UV/O(3) irradiation. These films were shown to remain stable and reactive for at least one week. We then demonstrated the application of the UV/O(3) treated PMMA films for the detection of microRNAs using a label-free detection method called total internal reflection ellipsometry (TIRE). A limit of detection of 10 pM was established. The technique proposed here is a simple and quick method for generating carboxylic functional films for label-free bioanalytical detection techniques.

Improving the sensitivity of immunoassays with PEG-COOH-like film prepared by plasma-based technique.

Herein we report on a preparation and performance of stable, hydrophilic and biocompatible polymeric material suitable for functionalization of disposable substrates used in biosensors. This new material features COOH surface groups cross-linked with ethylene glycol molecules and was prepared in situ on disposable, plastic substrate by high-throughput and environmentally friendly technique called plasma-enhanced chemical vapor deposition (PECVD). The film is grafted to the plasma activated plastic by sequential deposition of tetraethylorthosilicate, forming a bonding layer, and mixed vapors of acrylic acid and diethyleneglycol dimethylether (AA/PEG) that provide the desired functional groups forming a sensing, contact layer. A superior performance of the AA/PEG coating as suitable material for substrates in biomedical devices was demonstrated in a model fluorescence linked immunosorbent assay. The results were compared with other commonly used surface materials prepared by wet chemistry methods. The unique characteristic of the AA/PEG film is that the immunoassay can be executed without the need for a blocking step, typically using albumins, without negative consequences on the bioassay results. In fact, the superior quality of the materials modified with AA/PEG film was highlighted by improving the sensitivity of an immunoassay by two orders of magnitude when compared with substrates prepared by standard surface chemistry methods.

Multi-layered plasma-polymerized chips for SPR-based detection.

The surface functionalization of a noble metal is crucial in a surface plasmon resonance-based biomolecular detection system because the interfacial coating must retain the activity of immobilized biomolecules while enhancing the optimal loading. We present here a one-step, room-temperature, high-speed, gas-phase plasma polymerization process for functionalizing gold substrates using siloxane as an adhesion layer and acrylic acid as a functional layer. Siloxane- and thiol-based coatings were compared for their performance as adhesion and the interfacial layer for subsequent functionalization. An in situ sequential deposition of siloxane and acrylic acid resulted in a 7-fold increase in carboxylic functionality surfacial content compared to films deposited with thiol-containing precursors. Grading of the layer composition achieved as a consequence of ion-induced mixing on the surface coating under the application of the plasma is confirmed through secondary ion mass spectroscopic studies. DNA hybridization assays were demonstrated on gold/glass substrates using surface plasmon enhanced ellipsometry and the applicability of this coating for protein immunoassays were demonstrated with plasma functionalized gold/plastic substrates in Biacore 3000 SPR instrument.

Evaluation of different nonspecific binding blocking agents deposited inside poly(methyl methacrylate) microfluidic flow-cells.

Poly(methyl methacrylate) (PMMA) flow-cells containing microwells were deposited with different nonspecific binding blocking agents, namely, bovine serum albumin (BSA), cationic lipid (DOTAP:DOPE) and diethylene glycol dimethyl ether (DEGDME). Water contact angle (WCA) and atomic force microscope (AFM) measurements were carried out to confirm the successful depositions of BSA, DOTAP, and DEGDME onto the PMMA surfaces. Fluorescent intensity measurements were performed to evaluate the degree of nonspecific adsorption of Cy5-labeled anti-IgG proteins onto plain and oxygen plasma-treated (PT) PMMA flow-cells as well as PMMA flow-cells deposited with different above-mentioned blocking agents. We then employed a label-free detection method called total internal reflection ellipsometry (TIRE) to evaluate the stability of the deposited blocking agents inside the PMMA flow-cells. It was found that, while DOTAP:DOPE was the best agent for blocking the nonspecific adsorption, it could be removed from the PMMA surfaces of the flow-cells upon rinsing with phosphate buffered saline (PBS) and later deposited back onto the Au-coated glass sensing substrate of the TIRE. The removal of the blocking agents from PMMA surfaces and their deposition onto the sensing substrate were further manifested by measuring the kinetics and the amount of adsorbed anti-α-hCG proteins. Overall, the dry DEGDME coating by plasma-enhanced chemical vapor deposition (PECVD) showed very good blocking and excellent stability for subsequent assay inside the microwells. Our results could be useful when one considers what blocking agents should be used for PMMA-based microfluidic immunosensor or biosensor devices by looking at both the blocking efficiency and the stability of the blocking agent.

Kinetics of immunoassays with particles as labels: effect of antibody coupling using dendrimers as linkers.

In this article, we report on poly(amidoamine) dendrimers (PAMAM) as coupling agents for recombinant single-chain (ScFv) antibodies to nanoparticle (NP) labels, for use in immunoassay. We present a simple theory for the kinetics of particle capture onto a surface by means of an antibody-antigen reaction, in which the important parameter is the fraction of the particle surface that is active for reaction. We describe how increasing the generation number of the linking dendrimers significantly increased the fraction of the NP surface that is active for antigen binding and consequently also increased the assay kinetic rates. Use of dendrimers for conjugation of the NP to the antibody resulted in a significantly higher surface coverage of active antibody, in comparison with mono-valent linker chemistry. As a direct consequence, the increase in effective avidity significantly out-weighed any effect of a decreased diffusion coefficient due to the NP, when compared to that of a molecular dye-labelled antibody. The signal to noise ratio of the G4.5 dendrimer-sensitised nanoparticles out-performed the dye-labelled antibody by approximately four-fold. Particle aggregation experiments with the multi-valent antigen CRP demonstrated reaction-limited aggregation whose rate increased significantly with increasing generation number of the dendrimer linker.

TIRF microscopy as a screening method for non-specific binding on surfaces.

We report a method for studying nanoparticle-biosensor surface interactions based on total internal reflection fluorescence (TIRF) microscopy. We demonstrate that this simple technique allows for high throughput screening of non-specific adsorption (NSA) of nanoparticles on surfaces of different chemical composition. Binding events between fluorescent nanoparticles and functionalized Zeonor® surfaces are observed in real-time, giving a measure of the attractive or repulsive properties of the surface and the kinetics of the interaction. Three types of coatings have been studied: one containing a polymerized aminosilane network with terminal -NH(2) groups, a second film with a high density of -COOH surface groups and the third with sterically restraining branched poly(ethylene)glycol (PEG) functionality. TIRF microscopy revealed that the NSA of nanoparticles with negative surface charge on such modified coatings decreased in the following order -NH(2)>-branched PEG>-COOH. The surface specificity of the technique also allows discrimination of the degree of NSA of the same surface at different pH.

Total internal reflection ellipsometry as a label-free assessment method for optimization of the reactive surface of bioassay devices based on a functionalized cycloolefin polymer.

We report a label-free optical detection technique, called total internal reflection ellipsometry (TIRE), which can be applied to study the interactions between biomolecules and a functionalized polymer surface. Zeonor (ZR), a cycloolefin polymer with low autofluorescence, high optical transmittance and excellent chemical resistance, is a highly suitable material for optical biosensor platforms owing to the ease of fabrication. It can also be modified with a range of reactive chemical groups for surface functionalization. We demonstrate the applications of TIRE in monitoring DNA hybridization assays and human chorionic gonadotrophin sandwich immunoassays on the ZR surface functionalized with carboxyl groups. The Ψ and Δ spectra obtained after the binding of each layer of analyte have been fitted to a four-layer ellipsometric model to quantitatively determine the amount of analytes bound specifically to the functionalized ZR surface. Our proposed TIRE technique with its very low analyte consumption and its microfluidic array format could be a useful tool for evaluating several crucial parameters in immunoassays, DNA interactions, adsorption of biomolecules to solid surfaces, or assessment of the reactivity of a functionalized polymer surface towards a specific analyte.

Functionalization of cyclo-olefin polymer substrates by plasma oxidation: stable film containing carboxylic acid groups for capturing biorecognition elements.

Many current designs in biomedical diagnostics devices are based on the use of low cost, disposable, easy-to-fabricate chips made of plastic material, typically a cyclo-olefin polymer (COP). Low autofluorescence properties of such material, among others, make it ideal substrate for fluorescence-based applications. Functionalization of this plastic substrate for biomolecule attachment is therefore of great importance and the quality of films produced on such surface have often a significant influence on the performance of the device. In this communication we discuss the surface chemistry and some other characteristics of hydrophilic films, containing carboxylic acid functional groups, formed by plasma oxidation of COP and also films containing cross-linked, polymerized acryclic acid produced by sequential deposition of tetraorthosilicate and acrylic acid by plasma enhanced chemical vapor deposition (PECVD). Immobilization of labeled, single stranded DNA revealed high binding capacity for both coatings. To our best knowledge, this is the first example of direct immobilization of biomolecules on just plasma oxidized COP. Furthermore, more sophisticated treatment of the oxidized plastic substrate by PECVD with other organic precursors increased the binding capacity by some 40% than that of just plasma oxidized COP. The carboxy functionalized surfaces, due to the negative charge of the carboxy groups, showed very positive trends towards increasing the signal to noise ratio when charged biomolecules such as DNA, are used.