Improved biocompatibility of dendrimer-based gene delivery by histidine-modified nuclear localization signals.

Polyamidoamine (PAMAM) dendrimers have been explored as an alternative to polyethylenimine (PEI) as a gene delivery carrier because of their relatively low cytotoxicity and excellent biocompatibility. The transfection efficiency of PAMAM dendrimers can be improved by the addition of nuclear localization signal (NLS), a positively charged peptide sequence recognized by cargo proteins in the cytoplasm for nuclear transport. However, increased positive charges from NLS can cause damage to the cytoplasmic and mitochondrial membranes and lead to reactive oxygen species (ROS)-induced cytotoxicity. This negative effect of NLS can be negated without a significant reduction in transfection efficiency by adding histidine, an essential amino acid known as a natural antioxidant, to NLS. However, little is known about the exact mechanism by which histidine reduces cytotoxicity of NLS-modified dendrimers. In this study, we selected cystamine core PAMAM dendrimer generation 2 (cPG2) and conjugated it with NLS derived from Merkel cell polyomavirus large T antigen and histidine (n = 0-3) to improve transfection efficiency and reduce cytoxicity. NLS-modified cPG2 derivatives showed similar or higher transfection efficiency than PEI 25 kDa in NIH3T3 and human mesenchymal stem cells (hMSC). The cytotoxicity of NLS-modified cPG2 derivatives was substantially lower than PEI 25 kDa and was further reduced as the number of histidine in NLS increased. To understand the mechanism of cytoprotective effect of histidine-conjugated NLS, we examined ROS scavenging, hydroxyl radical generation and mitochondrial membrane potential as a function of the number of histidine in NLS. As the number of hisidine increased, cPG2 scavenged ROS more effectively as evidenced by the hydroxyl radical antioxidant capacity (HORAC) assay. This was consistent with the reduced intracellular hydroxyl radical concentration measured by 2',7'-dichlorodihydrofluorescein diacetate (DCFDA) assay in NIH3T3. Finally, fluorescence imaging with JC-1 confirmed that the mitochondrial membranes of NIH 3T3 were well-protected during the transfection when NLS contained histidine. These experimental results confirm the hypothesis that histidine residues scavenge ROS that is generated during the transfection process, preventing the excessive damage to mitochondrial membranes, leading to reduced cytotoxicity.

Hierarchical Wrinkle-Structured Catalyst Layer/Membrane Interface for Ultralow Pt-Loading Polymer Electrolyte Membrane Fuel Cells (PEMFCs).

The optimal architecture of three-dimensional (3D) interface between a polymer electrolyte membrane (PEM) and catalyst layer (CL) is one of the most important issues to improve PEM fuel cells' (PEMFCs) performance. Here, we report the fabrication of hierarchical wrinkled PEM/CL interface over a large area. We fabricated the hierarchical wrinkles on a multiscale from nanometers to micrometers by bottom-up-based facile, scalable, and simple method. Notably, it allows one to go beyond the limit of the catalyst utilization by extremely enlarged interfacial area. The resulting hierarchical wrinkled PEM/CL displays a dramatically increased electrochemically active surface area (ECSA) and power performance by the enhancement factors of 89% and 67% compared with those of flat interface, which is one of the best enhancements compared to previous PEMFCs. We believe the scalability of hierarchical wrinkled interface can be exploited to design advanced 3D interfaces for high-performance PEMFCs even with ultralow Pt-loading.

EARLY STARVATION 1 Is a Functionally Conserved Protein Promoting Gravitropic Responses in Plants by Forming Starch Granules.

Starch granules in the endodermis of plant hypocotyls act as statoliths that promote hypocotyl negative gravitropism-the directional growth of hypocotyls against gravity-in the dark. To identify the molecular components that regulate hypocotyl negative gravitropism, we performed a mutagenesis screen and isolated reduced gravitropic 1 (rgv1) mutants that lack starch granules in their hypocotyl endodermis and show reduced hypocotyl negative gravitropism in the dark. Using whole genome sequencing, we identified three different rgv1 mutants that are allelic to the previously reported early starvation 1 mutant, which is rapidly depleted of starch just before the dawn. ESV1 orthologs are present in starch-producing green organisms, suggesting ESV1 is a functionally conserved protein necessary for the formation of starch granules. Consistent with this, we found that liverwort and rice ESV1 can complement the Arabidopsis ESV1 mutant phenotype for both starch granules and hypocotyl negative gravitropism. To further investigate the function of ESV1 in other plants, we isolated rice ESV1 mutants and found that they show reduced levels of starch in their leaves and loosely packed starch granules in their grains. Both Arabidopsis and rice ESV1 mutants also lack starch granules in root columella and show reduced root gravitropism. Together, these results indicate ESV1 is a functionally conserved protein that promotes gravitropic responses in plants via its role in starch granule formation.

Nonviral gene delivery using PAMAM dendrimer conjugated with the nuclear localization signal peptide derived from human papillomavirus type 11 E2 protein.

Polyamidoamine (PAMAM) dendrimers are biocompatible polymers utilized in multiple biomedical applications including tissue engineering, medical diagnosis, drug and gene delivery systems, and biosensors. Normally, high-generation PAMAM dendrimers are advantageous for use in gene therapy research because they have a relatively high transfection efficiency. A high-generation PAMAM dendrimer has a high charge density, which induces greater damage to the membranous organelles than that induced by a low-generation PAMAM dendrimer. In this study, we added NLS sequences derived from the human papillomavirus (HPV) type 11 E2 protein to the low-generation PAMAM generation 2 (PAMAM G2) dendrimer and simultaneously introduced histidine residues to reduce cytotoxicity. RKRARH-PAMAM G2 showed similar and high transfection efficiencies in Neuro-2A and NIH3T3 cell lines and relatively low cytotoxicities relative to that of polyethylenimine 25 kDa (PEI 25 kDa).

Three-Dimensional Interlocking Interface: Mechanical Nanofastener for High Interfacial Robustness of Polymer Electrolyte Membrane Fuel Cells.

A scalable nanofastener featuring a 3D interlocked interfacial structure between the hydrocarbon membrane and perfluorinated sulfonic acid based catalyst layer is presented to overcome the interfacial issue of hydrocarbon membrane based polymer electrolyte membrane fuel cells. The nanofastener-introduced membrane electrode assembly (MEA) withstands more than 3000 humidity cycles, which is 20 times higher durability than that of MEA without nanofastener.

Highly Durable Supportless Pt Hollow Spheres Designed for Enhanced Oxygen Transport in Cathode Catalyst Layers of Proton Exchange Membrane Fuel Cells.

Supportless Pt catalysts have several advantages over conventional carbon-supported Pt catalysts in that they are not susceptible to carbon corrosion. However, the need for high Pt loadings in membrane electrode assemblies (MEAs) to achieve state-of-the-art fuel cell performance has limited their application in proton exchange membrane fuel cells. Herein, we report a new approach to the design of a supportless Pt catalyst in terms of catalyst layer architecture, which is crucial for fuel cell performance as it affects water management and oxygen transport in the catalyst layers. Large Pt hollow spheres (PtHSs) 100 nm in size were designed and prepared using a carbon template method. Despite their large size, the unique structure of the PtHSs, which are composed of a thin-layered shell of Pt nanoparticles (ca. 7 nm thick), exhibited a high surface area comparable to that of commercial Pt black (PtB). The PtHS structure also exhibited twice the durability of PtB after 2000 potential cycles (0-1.3 V, 50 mV/s). A MEA fabricated with PtHSs showed significant improvement in fuel cell performance compared to PtB-based MEAs at high current densities (>800 mA/cm2). This was mainly due to the 2.7 times lower mass transport resistance in the PtHS-based catalyst layers compared to that in PtB, owing to the formation of macropores between the PtHSs and high porosity (90%) in the PtHS catalyst layers. The present study demonstrates a successful example of catalyst design in terms of catalyst layer architecture, which may be applied to a real fuel cell system.

Application of Transmitted Kikuchi Diffraction in Studying Nano-oxide and Ultrafine Metallic Grains.

Transmitted Kikuchi diffraction (TKD) is an emerging SEM-based technique that enables investigation of highly refined grain structures. It offers higher spatial resolution by utilizing conventional electron backscattered diffraction equipment on electron-transparent samples. A successful attempt has been made to reveal nano-oxide grain structures as well as ultrafine severely deformed metallic grains. The effect of electron beam current was studied. Higher beam currents enhance pattern contrast and intensity. Lower detector exposure times could be employed to accelerate the acquisition time and minimize drift and carbon contamination. However, higher beam currents increase the electron interaction volume and compromise the spatial resolution. Lastly, TKD results were compared to orientation mapping results in TEM (ASTAR). Results indicate that a combination of TKD and EDS is a capable tool to characterize nano-oxide grains such as Al2O3 and Cr2O3 with similar crystal structures.

Designing an ultrathin silica layer for highly durable carbon nanofibers as the carbon support in polymer electrolyte fuel cells.

A critical issue for maintaining long-term applications of polymer electrolyte fuel cells (PEFCs) is the development of an innovative technique for the functionalization of a carbon support that preserves their exceptional electrical conductivity and robustly enriches their durability. Here, we report for the first time how the formation of a partially coated, ultrathin, hydrophobic silica layer around the surfaces of the carbon nanofiber (CNF) helps improve the durability of the CNF without decreasing the significant electrical conductivity of the virgin CNF. The synthesis involved the adsorption of polycarbomethylsilane (PS) on the CNF's sidewalls, followed by high temperature pyrolysis of PS, resulting in a highly durable, conductive carbon support in PEFCs. The Pt nanoparticles are in direct contact with the surface of the carbon in the empty spaces between unevenly coated silica layers, which are not deposited directly onto the silica layer. The presence of a Pt nanoparticle layer that was thicker than the silica layer would be a quite advantageous circumstance that provides contact with other neighboring CNFs without having a significant adverse effect that deeply damages the electrical conductivity of the neighboring CNF composites with the silica layer. Furthermore, the ultrathin, hydrophobic silica layer around the surfaces of the CNF provides great potential to reduce the presence of water molecules in the vicinity of the carbon supports and the ˙OH radicals formed on the surface of the Pt catalyst. As a result, the CNF with a 5 wt% silica layer that we prepared has had extremely high initial performance and durability under severe carbon corrosion conditions, starting up with 974 mA cm(-2) at 0.6 V and ending up with more than 58% of the initial performance (i.e., 569 mA cm(-2) at 0.6 V) after a 1.6 V holding test for 6 h. The beginning-of-life and end-of-life performances based on the virgin CNF without the silica layer were 981 and 340 mA cm(-2) at 0.6 V, respectively. The CNF having a silica layer had long-term durability which was superior to that of the virgin CNF.