Epidermis of Cereus hildmannianus as a biomimetic scaffold for tissue engineering.

A thin plastic-like film separated from the epidermis of Cereus hildmannianus has excellent tensile strength, resistance to water and high antimicrobial activity and supports the growth of mouse fibroblast cells. Cactuses are one of the most under explored plant species with high potential for food, materials, pharmaceutical and other applications. Although studies have shown the ability of cactuses to be used for food, as a source for fibers, as reinforcement for composites and other applications, the role of individual layers and their properties has been studied to a limited extent. In this paper, a thin translucent layer was separated from the epidermis of C. hildmannianus and studied for its composition, structure and properties. The layer is composed of about 73% cellulose and 2% lignin and morphologically, shows surface with uneven and serrated edges. Films with length of up to 36 cm, strength of 6.8 MPa and elongation of 2.5% could be peeled from the cactus suggesting their suitability for food packaging and other applications. X-ray diffraction patterns and FTIR spectrums indicated that the films are similar to that of cellulose and major thermal degradation occurred above 280°C. Compared to standards, the cactus films showed about 41% and 44% inhibition against gram positive and gram negative bacteria and 67% inhibition of the common fungal strain (A. niger). Films showed high stability in water and to common chemicals. When used as substrates for mouse fibroblast cell growth, no cytotoxicity was observed and the cactus peel supported the attachment and proliferation of cells demonstrating potential to be used as a biomaterial for tissue engineering applications.

MAPP Compatibilized Recycled Woodchips Reinforced Polypropylene Composites with Exceptionally High Strength and Stability.

Wood chips were used in their original form without any physical or chemical treatment as reinforcement for polypropylene to develop composites as potential replacement for medium density fiber (MDF) boards, gypsum based false ceiling and other building materials. Wood chips are generated as byproducts and have limited and low value applications. Composites with up to 90% wood chips were developed through compression molding and the mechanical, acoustic and thermal properties were studied. Further, maleated polypropylene (MAPP) was used (1-5% w/w based on woodchips used) as compatibilizer and changes in properties were recorded. Up to 300% increase in tensile properties were observed when 5% compatibilizer was present. Tensile properties of the composites containing MAPP were higher than that of commercially available medium density plywood boards and also gypsum based ceiling tiles. Addition of MAPP did not change thermal conductivity but decreased sound absorption. Wood chips reinforced PP composites containing MAPP show exceedingly high properties and could replace particle, fiber boards and other building materials in current use. Utilizing the wood waste also results in environmentally friendly, sustainable and low cost building materials.

Natural sub-bituminous coal as filler enhances mechanical, insulation and flame retardant properties of coir-polypropylene bio-composites.

Additives provide substantial improvement in the properties of composites. Although bio-based composites are preferred over synthetic polymer and metal-based composites, they do not have the requisite properties to meet specific needs. Hence, organic, inorganic and metallic additives are included to improve the properties of bio-based composites. Coal is a readily available resource with high thermal insulation, flame resistance and other properties. This work demonstrates the addition of 20-30% natural sub-bituminous coal as filler for coir-reinforced polypropylene (PP) composites and exhibits an increased tensile strength by 66% and flexural strength by 55% compared to the composites without any filler. Such composites are intended for insulation applications and as a replacement for gypsum-based false ceiling tiles. Various ratios of coal samples were included in the composites and their effect on mechanical, acoustic, thermal insulation, flame and water resistance have been determined. A substantial improvement in both flexural and tensile properties has been observed due to the addition of coal. However, a marginal improvement has been observed in both thermal conductivity (0.65 W/mK) and flame resistance values due to the presence of coal. Adding coal increases the intensity of noise absorption, particularly at a higher frequency, whereas water sorption of the composites tends to decrease with an increase in the coal content. The addition of coal improves and adds unique properties to composites, allowing coir-coal-PP composites to outperform commercially available gypsum-based insulation panels.

Properties of chitin and chitosan extracted from silkworm pupae and egg shells.

Chitin and chitosan from silkworm pupae and egg shells show distinct properties with excellent antimicrobial properties and cytocompatiblity. Spent silkworm pupae and hatched egg shells are discarded as waste but contain valuable carbohydrates, proteins and lipids. Chitosan has excellent antimicrobial properties and is widely used for food, medical and biotechnological applications. In this paper, we report the properties of chitin and chitosan from silkworm pupae and egg shells in comparison to commercially available chitosan. Defatted and deproteinated pupae and shells were demineralized and later deacetylated to form chitosan. Thermal behavior, physical structure, antimicrobial activity and ability to support the attachment and growth of NIH3T3 cells were studied. Chitin and chitosan from both pupae and shells had similar structure and composition. Crystallinity of the pupae chitosan was 48% compared to 38% for egg shell chitosan. Silkworm chitosan showed considerably higher antibacterial and antifungal activity compared to standard. Cells were viable in the presence of pupae and egg shell chitosan in all the concentrations tested. Based on these observations, it can be inferred that silkworm pupae and shells provide a renewable and sustainable source for chitosan with properties suitable for food and medical applications.

Extraction and characterisation of natural cellulose fibers from Kigelia africana.

Kigelia africana also known as sausage plant, yields highly fibrous fruit with a hard shell. Many medicinal uses are reported for the extracts from the fruits, seeds and leaves of sausage trees. In this research, natural cellulose fibers were extracted from the fruit using NaOH and later bleached and characterized for their properties. Results revealed that significant amount of hemicellulose and lignin was lost after the alkali treatment and bleaching leading to a highly cellulosic fiber (up to 71 %). Morphologically, surface of the fibers varied from rough to smooth depending on the extent of treatment. The thermal stability, crystallinity and hydrophobicity increased after the treatment. Sausage fibers also possessed anti-microbial activity against common gram negative and gram positive bacteria. Overall, sausage fibers have properties similar to that of cotton and better than fibers obtained from many unconventional sources. With improved hydrophobicity and anti-bacterial properties, sausage fibers could be potentially applied in functional polymer composites.

Biofibers and biocomposites from sabai grass: A unique renewable resource.

Natural cellulose fibers were extracted from a fast growing perennial grass Eulaliopsis binata (commonly known as Sabai) and characterized for their structure and properties. The untreated sabai grass has been used as reinforcement for polypropylene composites and properties of the composites have been investigated. Although the composition of the sabai grass is typical to other lignocellulosic sources, there is a high content of flavonoids (630 mg/g) and phenols (510 mg/g) which provides high antibacterial, and antifungal properties to the fibers and composites developed. Fiber bundles extracted from the grass had tensile strength of 493 MPa and tensile modulus of 21 GPa, similar to common natural cellulose fibers. Both tensile and flexural properties of polypropylene composites increased with increasing ratio of sabai grass. Polypropylene composites reinforced with sabai grass show high noise insulation and thermal resistance properties suggesting their suitability for automotive and building applications.

Highly porous carbon from a natural cellulose fiber as high efficiency sorbent for lead in waste water.

The persistence of hollow centre in the carbon obtained from milkweed floss provides exceptional sorption characteristics, not seen in common biomasses or their derivatives. A considerably high sorption of 320mg of lead per gram of milkweed carbon was achieved without any chemical modification to the biomass. In this research, we have carbonized milkweed floss and used the carbon as a sorbent for lead in waste water. A high surface area of 170m2g-1 and pore volume of 1.07cm3g-1 was seen in the carbon. Almost complete removal (>99% efficiency) of lead could be achieved within 5min when the concentration of lead in the solution was 100ppm, close to that prevailing in industrial waste water. SEM images showed that the carbon was hollow and confocal images confirmed that the sorbate could penetrate inside the hollow tube.