RESUMEN
To address the problem of the time-sharing recording of dual-wavelength low-coherence holograms while avoiding the use of customized achromatic optical elements, a snapshot dual-wavelength digital holography with LED and laser hybrid illumination is proposed. In this method, the parallel phase-shifting method is firstly employed to suppress zero-order and twin-image noise, and to record a LED hologram with low speckle noise and full field of view. Secondly, another laser hologram with a different center wavelength affected by speckle noise is recorded simultaneously using the spatial multiplexing technique. Finally, dual-wavelength wrapped phase images are reconstructed from a spatial multiplexing hologram, and then are combined to achieve low-noise phase unwrapping utilizing the iterative algorithm. Simulation and optical experiments on a reflective step with a depth of 1.38µm demonstrate that the proposed method can achieve single-shot and large-range height measurements while maintaining low-noise and full-field imaging.
RESUMEN
Recent advancements in ptychography have demonstrated the potential of coded ptychography (CP) for high-resolution optical imaging in a lensless configuration. However, CP suffers imaging throughput limitations due to scanning inefficiencies. To address this, we propose what we believe is a novel 'fly-scan' scanning strategy utilizing two eccentric rotating mass (ERM) vibration motors for high-throughput coded ptychographic microscopy. The intrinsic continuity of the 'fly-scan' technique effectively eliminates the scanning overhead typically encountered during data acquisition. Additionally, its randomized scanning trajectory considerably reduces periodic artifacts in image reconstruction. We also developed what we believe to be a novel rolling-shutter distortion correction algorithm to fix the rolling-shutter effects. We built up a low-cost, DIY-made prototype platform and validated our approach with various samples including a resolution target, a quantitative phase target, a thick potato sample and biospecimens. The reported platform may offer a cost-effective and turnkey solution for high-throughput bio-imaging.
RESUMEN
Conventional multi-height microscopy techniques introduce different object-to-detector distances to obtain multiple measurements for phase retrieval. However, surpassing the diffraction limit imposed by the numerical aperture (NA) of the objective lens remains a challenging task. Here, we report a novel structured modulation multi-height microscopy technique for quantitative high-resolution imaging. In our platform, a thin diffuser is placed in between the sample and the objective lens. By translating the diffuser to different axial positions, a sequence of modulated intensity images is captured for reconstruction. The otherwise inaccessible high-resolution object information can thus be encoded into the optical system for detection. In the construction process, we report a ptychographic phase retrieval algorithm to recover the existing wavefront of the complex object. We validate our approach using a resolution target, a phase target, and various biological samples. We demonstrate a â¼4-fold resolution gain over the diffraction limit. We also demonstrate our approach to achieve a 6.5 mm by 4.3 mm field of view and a half-pitch resolution of 1.2 µm. The reported methodology provides a portable, turnkey solution for quantitative high-resolution imaging with potential applications in disease diagnosis, sample screening, and other fields.
RESUMEN
First envisioned for determining crystalline structures, ptychography has become a useful imaging tool for microscopists. However, ptychography remains underused by biomedical researchers due to its limited resolution and throughput in the visible light regime. Recent developments of spatial- and Fourier-domain ptychography have successfully addressed these issues and now offer the potential for high-resolution, high-throughput optical imaging with minimal hardware modifications to existing microscopy setups, often providing an excellent trade-off between resolution and field of view inherent to conventional imaging systems, giving biomedical researchers the best of both worlds. Here, we provide extensive information to enable the implementation of ptychography by biomedical researchers in the visible light regime. We first discuss the intrinsic connections between spatial-domain coded ptychography and Fourier ptychography. A step-by-step guide then provides the user instructions for developing both systems with practical examples. In the spatial-domain implementation, we explain how a large-scale, high-performance blood-cell lens can be made at negligible expense. In the Fourier-domain implementation, we explain how adding a low-cost light source to a regular microscope can improve the resolution beyond the limit of the objective lens. The turnkey operation of these setups is suitable for use by professional research laboratories, as well as citizen scientists. Users with basic experience in optics and programming can build the setups within a week. The do-it-yourself nature of the setups also allows these procedures to be implemented in laboratory courses related to Fourier optics, biomedical instrumentation, digital image processing, robotics and capstone projects.
Asunto(s)
Procesamiento de Imagen Asistido por Computador , Microscopía , Microscopía/métodos , Procesamiento de Imagen Asistido por Computador/métodos , Imagen ÓpticaRESUMEN
Imaging a large number of bio-specimens at high speed is essential for many biomedical applications. The common strategy is to place specimens at different lateral positions and image them sequentially. Here we report a new on-chip imaging strategy, termed depth-multiplexed ptychographic microscopy (DPM), for parallel imaging and sensing at high speed. Different from the common strategy, DPM stacks multiple specimens in the axial direction and images the entire z-stack all at once. In our prototype platform, we modify a low-cost car mirror for programmable steering of the incident laser beam. A blood-coated image sensor is then placed underneath the stacked sample for acquiring the resulting diffraction patterns. With the captured images, we perform blind recovery of the incident beam angle and model different layers of the stacked sample as different coded surfaces for object reconstruction. For in vitro experiment, we demonstrate time-lapse cell culture monitoring by imaging 3 stacked microfluidic channels on the coded sensor. For high-throughput cytometric analysis, we image 5 stacked brain sections with a 205-mm2 field of view in â¼50 s. Cytometric analysis is also performed to quantify the cellular proliferation biomarkers on the slides. The DPM approach adds a new degree of freedom for data multiplexing in microscopy, enabling parallel imaging of multiple specimens using a single detector. The demonstrated 6-mm depth of field is among the longest ones in microscopy imaging. The novel depth-multiplexed configuration also complements the miniaturization provided by microfluidics devices, offering a solution for on-chip sensing and imaging with efficient sample handling.
Asunto(s)
Técnicas Biosensibles , Microscopía , Dispositivos Laboratorio en un Chip , Luz , MicrofluídicaRESUMEN
The applications of conventional ptychography are limited by its relatively low resolution and throughput in the visible light regime. The new development of coded ptychography (CP) has addressed these issues and achieved the highest numerical aperture for large-area optical imaging in a lensless configuration. A high-quality reconstruction of CP relies on precise tracking of the coded sensor's positional shifts. The coded layer on the sensor, however, prevents the use of cross correlation analysis for motion tracking. Here we derive and analyze the motion tracking model of CP. A novel, to the best of our knowledge, remote referencing scheme and its subsequent refinement pipeline are developed for blind image acquisition. By using this approach, we can suppress the correlation peak caused by the coded surface and recover the positional shifts with deep sub-pixel accuracy. In contrast with common positional refinement methods, the reported approach can be disentangled from the iterative phase retrieval process and is computationally efficient. It allows blind image acquisition without motion feedback from the scanning process. It also provides a robust and reliable solution for implementing ptychography with high imaging throughput. We validate this approach by performing high-resolution whole slide imaging of bio-specimens.
Asunto(s)
Luz , Imagen Óptica , Movimiento (Física)RESUMEN
The recent advent of whole slide imaging (WSI) systems has moved digital pathology closer to diagnostic applications and clinical practices. Integrating WSI with machine learning promises the growth of this field in upcoming years. Here we report the design and implementation of a handheld, colour-multiplexed, and AI-powered ptychographic whole slide scanner for digital pathology applications. This handheld scanner is built using low-cost and off-the-shelf components, including red, green, and blue laser diodes for sample illumination, a modified stage for programmable sample positioning, and a synchronized image sensor pair for data acquisition. We smear a monolayer of goat blood cells on the main sensor for high-resolution lensless coded ptychographic imaging. The synchronized secondary sensor acts as a non-contact encoder for precisely tracking the absolute object position for ptychographic reconstruction. For WSI, we introduce a new phase-contrast-based focus metric for post-acquisition autofocusing of both stained and unstained specimens. We show that the scanner can resolve the 388-nm linewidth on the resolution target and acquire gigapixel images with a 14 mm × 11 mm area in â¼70 seconds. The imaging performance is validated with regular stained pathology slides, unstained thyroid smears, and malaria-infected blood smears. The deep neural network developed in this study further enables high-throughput cytometric analysis using the recovered complex amplitude. The reported do-it-yourself scanner offers a portable solution to transform the high-end WSI system into one that can be made widely available at a low cost. The capability of high-throughput quantitative phase imaging may also find applications in rapid on-site evaluations.
Asunto(s)
Ensayos Analíticos de Alto Rendimiento , Procesamiento de Imagen Asistido por Computador , Microscopía , Inteligencia Artificial , Tecnología Digital , Diseño de Equipo , Ensayos Analíticos de Alto Rendimiento/instrumentación , Ensayos Analíticos de Alto Rendimiento/métodos , Humanos , Procesamiento de Imagen Asistido por Computador/instrumentación , Procesamiento de Imagen Asistido por Computador/métodos , Microscopía/instrumentación , Microscopía/métodosRESUMEN
The Blu-ray drive is an engineering masterpiece that integrates disc rotation, pickup head translation, and three lasers in a compact and portable format. Here, we integrate a blood-coated image sensor with a modified Blu-ray drive for high-throughput cytometric analysis of various biospecimens. In this device, samples are mounted on the rotating Blu-ray disc and illuminated by the built-in lasers from the pickup head. The resulting coherent diffraction patterns are then recorded by the blood-coated image sensor. The rich spatial features of the blood-cell monolayer help down-modulate the object information for sensor detection, thus forming a high-resolution computational biolens with a theoretically unlimited field of view. With the acquired data, we develop a lensless coherent diffraction imaging modality termed rotational ptychography for image reconstruction. We show that our device can resolve the 435 nm line width on the resolution target and has a field of view only limited by the size of the Blu-ray disc. To demonstrate its applications, we perform high-throughput urinalysis by locating disease-related calcium oxalate crystals over the entire microscope slide. We also quantify different types of cells on a blood smear with an acquisition speed of â¼10,000 cells per second. For in vitro experiments, we monitor live bacterial cultures over the entire Petri dish with single-cell resolution. Using biological cells as a computational lens could enable new intriguing imaging devices for point-of-care diagnostics. Modifying a Blu-ray drive with the blood-coated sensor further allows the spread of high-throughput optical microscopy from well-equipped laboratories to citizen scientists worldwide.
Asunto(s)
Rayos Láser , MicroscopíaRESUMEN
Traditional microbial detection methods often rely on the overall property of microbial cultures and cannot resolve individual growth event at high spatiotemporal resolution. As a result, they require bacteria to grow to confluence and then interpret the results. Here, we demonstrate the application of an integrated ptychographic sensor for lensless cytometric analysis of microbial cultures over a large scale and with high spatiotemporal resolution. The reported device can be placed within a regular incubator or used as a standalone incubating unit for long-term microbial monitoring. For longitudinal study where massive data are acquired at sequential time points, we report a new temporal-similarity constraint to increase the temporal resolution of ptychographic reconstruction by 7-fold. With this strategy, the reported device achieves a centimeter-scale field of view, a half-pitch spatial resolution of 488 nm, and a temporal resolution of 15-s intervals. For the first time, we report the direct observation of bacterial growth in a 15-s interval by tracking the phase wraps of the recovered images, with high phase sensitivity like that in interferometric measurements. We also characterize cell growth via longitudinal dry mass measurement and perform rapid bacterial detection at low concentrations. For drug-screening application, we demonstrate proof-of-concept antibiotic susceptibility testing and perform single-cell analysis of antibiotic-induced filamentation. The combination of high phase sensitivity, high spatiotemporal resolution, and large field of view is unique among existing microscopy techniques. As a quantitative and miniaturized platform, it can improve studies with microorganisms and other biospecimens at resource-limited settings.
Asunto(s)
Técnicas Biosensibles , Estudios Longitudinales , MicroscopíaRESUMEN
Multi-height phase retrieval introduces different object-to-detector distances for obtaining phase diversity measurements. In the acquisition process, the slow-varying phase information, however, cannot be converted to intensity variations for detection. Therefore, the low-frequency contents of the phase profile are lost during acquisition and cannot be properly restored via phase retrieval. Here, we demonstrate the use of a coded image sensor for addressing this challenge in multi-height phase retrieval. In our scheme, we add a coded layer on top of the image sensor for encoding the slow-varying complex wavefronts into intensity variations of the modulated patterns. Inspired by the concept of blind ptychography, we report a reconstruction scheme to jointly recover the complex object and the unknown coded layer using multi-height measurements. With both simulation and experimental results, we show that the recovered phase is quantitative and the slow-varying phase profiles can be properly restored using lensless multi-height measurements. We also show that the image quality using the coded sensor is better than that of a regular image sensor. For demonstrations, we validate the reported scheme with various biospecimens and compare the results to those of regular lensless multi-height phase retrieval. The use of a coded image sensor may enable true quantitative phase imaging for the lensless multi-height, multi-wavelength, and transport-of-intensity equation approaches.
RESUMEN
Whole slide imaging (WSI) has moved the traditional manual slide inspection process to the era of digital pathology. A typical WSI system translates the sample to different positions and captures images using a high numerical aperture (NA) objective lens. Performing oil-immersion microscopy is a major obstacle for WSI as it requires careful liquid handling during the scanning process. Switching between dry objective and oil-immersion lens is often impossible as it disrupts the acquisition process. For a high-NA objective lens, the sub-micron depth of field also poses a challenge to acquiring in-focus images of samples with uneven topography. Additionally, it implies a small field of view for each tile, thus limiting the system throughput and resulting in a long acquisition time. Here we report a deep learning-enabled WSI platform, termed DeepWSI, to substantially improve the system performance and imaging throughput. With this platform, we show that images captured with a regular dry objective lens can be transformed into images comparable to that of a 1.4-NA oil immersion lens. Blurred images with defocus distance from -5 µm to +5 µm can be virtually refocused to the in-focus plane post measurement. We demonstrate an equivalent data throughput of >2 gigapixels per second, the highest among existing WSI systems. Using the same deep neural network, we also report a high-resolution virtual staining strategy and demonstrate it for Fourier ptychographic WSI. The DeepWSI platform may provide a turnkey solution for developing high-performance diagnostic tools for digital pathology.
Asunto(s)
Sangre/diagnóstico por imagen , Procesamiento de Imagen Asistido por Computador/métodos , Antígeno Ki-67/análisis , Leucemia/diagnóstico por imagen , Microscopía/instrumentación , Tripanosomiasis/diagnóstico por imagen , Animales , Aprendizaje Profundo , Humanos , Inmersión , Coloración y EtiquetadoRESUMEN
We report the implementation of a fully on-chip, lensless microscopy technique termed optofluidic ptychography. This imaging modality complements the miniaturization provided by microfluidics and allows the integration of ptychographic microscopy into various lab-on-a-chip devices. In our prototype, we place a microfluidic channel on the top surface of a coverslip and coat the bottom surface with a scattering layer. The channel and the coated coverslip substrate are then placed on top of an image sensor for diffraction data acquisition. Similar to the operation of a flow cytometer, the device utilizes microfluidic flow to deliver specimens across the channel. The diffracted light from the flowing objects is modulated by the scattering layer and recorded by the image sensor for ptychographic reconstruction, where high-resolution quantitative complex images are recovered from the diffraction measurements. By using an image sensor with a 1.85 µm pixel size, our device can resolve the 550 nm linewidth on the resolution target. We validate the device by imaging different types of biospecimens, including C. elegans, yeast cells, paramecium, and closterium sp. We also demonstrate a high-resolution ptychographic reconstruction at a video framerate of 30 frames per second. The reported technique can address a wide range of biomedical needs and engenders new ptychographic imaging innovations in a flow cytometer configuration.
Asunto(s)
Caenorhabditis elegans , Dispositivos Laboratorio en un Chip , Animales , Microfluídica , Microscopía , MiniaturizaciónRESUMEN
We report a new, to the best of our knowledge, lensless microscopy configuration by integrating the concepts of transverse translational ptychography and defocus multi-height phase retrieval. In this approach, we place a tilted image sensor under the specimen for introducing linearly increasing phase modulation along one lateral direction. Similar to the operation of ptychography, we laterally translate the specimen and acquire the diffraction images for reconstruction. Since the axial distance between the specimen and the sensor varies at different lateral positions, laterally translating the specimen effectively introduces defocus multi-height measurements while eliminating axial scanning. Lateral translation further introduces sub-pixel shift for pixel super-resolution imaging and naturally expands the field of view for rapid whole slide imaging. We show that the equivalent height variation can be precisely estimated from the lateral shift of the specimen, thereby addressing the challenge of precise axial positioning in conventional multi-height phase retrieval. Using a sensor with 1.67 µm pixel size, our low-cost and field-portable prototype can resolve the 690 nm linewidth on the resolution target. We show that a whole slide image of a blood smear with a 120mm2 field of view can be acquired in 18 s. We also demonstrate accurate automatic white blood cell counting from the recovered image. The reported approach may provide a turnkey solution for addressing point-of-care and telemedicine-related challenges.
Asunto(s)
MicroscopíaRESUMEN
Whole slide imaging (WSI) systems convert the conventional biological samples into digital images. Existing commercial WSI systems usually require an expensive high-performance motorized stage to implement the precise mechanical control, and the cost is prohibitive for most individual pathologists. In this work, we report a low-cost WSI system using the off-the-shelf components, including a computer numerical control (CNC) router, a photographic lens, a programmable LED array, a fluorescence filter cube, and a surface-mount LED. To perform real-time single-frame autofocusing, we exploited two elements of a programmable LED array to illuminate the sample from two different incident angles. The captured image would contain two copies of the sample with a certain separation determined by the defocus distance of the sample. Then the defocus distance can be recovered by identifying the translational shift of the two copies. The reported WSI system can reach a resolution of â¼0.7 µm. The time to determine the optimal focusing position for each tile is only 0.02 s, which is about an 83% improvement compared to our previous work. We quantified the focusing performance on 1890 different tissue tiles. The mean focusing error is â¼0.34 µm, which is well below the ± 0.7 µm depth of field range of our WSI system. The reported WSI system can handle both the semitransparent and the transparent sample, enabling us to demonstrate the implementation of brightfield, fluorescence, and phase-contrast WSI. An automatic digital distortion correction strategy is also developed to avoid the stitching errors. The reported prototype has an affordable cost and can make it broadly available and utilizable for individual pathologists as well as can promote the development of digital pathology.
RESUMEN
Fourier ptychographic microscopy (FPM) is a computational approach geared towards creating high-resolution and large field-of-view images without mechanical scanning. Acquiring color images of histology slides often requires sequential acquisitions with red, green, and blue illuminations. The color reconstructions often suffer from coherent artifacts that are not presented in regular incoherent microscopy images. As a result, it remains a challenge to employ FPM for digital pathology applications, where resolution and color accuracy are of critical importance. Here we report a deep learning approach for performing unsupervised image-to-image translation of FPM reconstructions. A cycle-consistent adversarial network with multiscale structure similarity loss is trained to perform virtual brightfield and fluorescence staining of the recovered FPM images. In the training stage, we feed the network with two sets of unpaired images: (1) monochromatic FPM recovery and (2) color or fluorescence images captured using a regular microscope. In the inference stage, the network takes the FPM input and outputs a virtually stained image with reduced coherent artifacts and improved image quality. We test the approach on various samples with different staining protocols. High-quality color and fluorescence reconstructions validate its effectiveness.
RESUMEN
Whole slide imaging (WSI) has moved digital pathology closer to diagnostic practice in recent years. Due to the inherent tissue topography variability, accurate autofocusing remains a critical challenge for WSI and automated microscopy systems. The traditional focus map surveying method is limited in its ability to acquire a high degree of focus points while still maintaining high throughput. Real-time approaches decouple image acquisition from focusing, thus allowing for rapid scanning while maintaining continuous accurate focus. This work reviews the traditional focus map approach and discusses the choice of focus measure for focal plane determination. It also discusses various real-time autofocusing approaches including reflective-based triangulation, confocal pinhole detection, low-coherence interferometry, tilted sensor approach, independent dual sensor scanning, beam splitter array, phase detection, dual-LED illumination and deep-learning approaches. The technical concepts, merits and limitations of these methods are explained and compared to those of a traditional WSI system. This review may provide new insights for the development of high-throughput automated microscopy imaging systems that can be made broadly available and utilizable without loss of capacity.
Asunto(s)
Procesamiento de Imagen Asistido por Computador , MicroscopíaRESUMEN
We report an angle-tilted, wavelength-multiplexed ptychographic modulation approach for multispectral lensless on-chip microscopy. In this approach, we illuminate the specimen with lights at five wavelengths simultaneously. A prism is added at the illumination path for spectral dispersion. Thus, lightwaves at different wavelengths hit the specimen at slightly different incident angles, breaking the ambiguities in mixed-state ptychographic reconstruction. At the detection path, we place a thin diffuser between the specimen and the monochromatic image sensor for encoding the spectral information into 2D intensity measurements. By scanning the sample to different x-y positions, we acquire a sequence of monochromatic images for reconstructing the five complex object profiles at the five wavelengths. An up-sampling procedure is integrated into the recovery process to bypass the resolution limit imposed by the imager pixel size. We demonstrate a half-pitch resolution of 0.55 µm using an image sensor with 1.85 µm pixel size. We also demonstrate quantitative and high-quality multispectral reconstructions of stained tissue sections for digital pathology applications.
RESUMEN
Antibiotic resistance genes (ARGs) and antibiotics in the aquatic environment raise health concerns particularly on the dispersal and persistence of antibiotic resistance. Large lakes, which serve as catch basins of anthropogenic inputs provide an ideal environment for understanding the occurrence and accumulation of ARGs and antibiotics in freshwater environments. Here, the largest freshwater lake in China, Poyang Lake, located in the developing district of Yangtze valley was used to study the characterization of the spatial and seasonal variation of both ARGs and antibiotics. Results showed that twelve tested ARGs (sul1, sul2, sul3, tetA, tetB, tetC, tetH, tetW, tetO, tetM, qnrS, and qnrB) were detected in the surface waters of Poyang Lake, with a detection frequency ranging from 19.2% to 100%, and sul2 and tetA genes were identified as potential indicators of ARG pollution in this region. Among the 11 analyzed antibiotics, sulfonamides were the predominant antibiotics with a contribution of more than 50% to the total concentrations of tested antibiotics. The total concentrations of both ARGs and antibiotics were higher in the dry season than those in the wet season. Furthermore, ARGs and antibiotics in the surface waters also varied with sampling locations, being consistently at riverine tributaries. Positive correlations were also observed between the concentrations of ARGs and antibiotics, as well as the integron gene (intI1), indicating that antibiotics and intI1 may be playing important roles in the occurrence and dispersal of ARGs in the surface waters. Lastly, our results suggest that intensive anthropogenic activities related to antibiotic usage have substantially contributed to the occurrence and persistence of ARGs and antibiotics in Poyang Lake.
Asunto(s)
Antibacterianos/análisis , Farmacorresistencia Bacteriana/genética , Lagos/química , Lagos/microbiología , Contaminantes del Agua/análisis , China , Monitoreo del Ambiente , Genes Bacterianos , Integrones/genética , Estaciones del Año , Sulfonamidas/análisisRESUMEN
We report a novel lensless on-chip microscopy platform based on near-field blind ptychographic modulation. In this platform, we place a thin diffuser in between the object and the image sensor for light wave modulation. By blindly scanning the unknown diffuser to different x-y positions, we acquire a sequence of modulated intensity images for quantitative object recovery. Different from previous ptychographic implementations, we employ a unit magnification configuration with a Fresnel number of â¼50 000, which is orders of magnitude higher than those of previous ptychographic setups. The unit magnification configuration allows us to have the entire sensor area, 6.4 mm by 4.6 mm, as the imaging field of view. The ultra-high Fresnel number enables us to directly recover the positional shift of the diffuser in the phase retrieval process, addressing the positioning accuracy issue plaguing regular ptychographic experiments. In our implementation, we use a low-cost, DIY scanning stage to perform blind diffuser modulation. Precise mechanical scanning that is critical in conventional ptychography experiments is no longer needed in our setup. We further employ an up-sampling phase retrieval scheme to bypass the resolution limit set by the imager pixel size and demonstrate a half-pitch resolution of 0.78 µm. We validate the imaging performance via in vitro cell cultures, transparent and stained tissue sections, and a thick biological sample. We show that the recovered quantitative phase map can be used to perform effective cell segmentation of a dense yeast culture. We also demonstrate 3D digital refocusing of the thick biological sample based on the recovered wavefront. The reported platform provides a cost-effective and turnkey solution for large field-of-view, high-resolution, and quantitative on-chip microscopy. It is adaptable for a wide range of point-of-care-, global-health-, and telemedicine-related applications.
Asunto(s)
MicroscopíaRESUMEN
We report a new coherent imaging technique, termed ptychographic structured modulation (PSM), for quantitative super-resolution microscopy. In this technique, we place a thin diffuser (i.e., a scattering lens) in between the sample and the objective lens to modulate the complex light waves from the object. The otherwise inaccessible high-resolution object information can thus be encoded into the captured images. We then employ a ptychographic phase retrieval process to jointly recover the exit wavefront of the complex object and the unknown diffuser profile. Unlike the illumination-based super-resolution approach, the recovered image of our approach depends upon how the complex wavefront exits the sample-not enters it. Therefore, the sample thickness becomes irrelevant during reconstruction. After recovery, we can propagate the super-resolution complex wavefront to any position along the optical axis. We validate our approach using a resolution target, a quantitative phase target, a two-layer sample, and a thick polydimethylsiloxane sample. We demonstrate a 4.5-fold resolution gain over the diffraction limit. We also show that a four-fold resolution gain can be achieved with as few as â¼30 images. The reported approach may provide a quantitative super-resolution strategy for coherent light, x-ray, and electron imaging.