Displacement-pressure biparametrically regulated softness sensory system for intraocular pressure monitoring.

High intraocular pressure (IOP) is one of the high-risk pathogenic factors of glaucoma. Existing methods of IOP measurement are based on the direct interaction with the cornea. Commercial ophthalmic tonometers based on snapshot measurements are expensive, bulky, and their operation requires trained personnel. Theranostic contact lenses are easy to use, but they may block vision and cause infection. Here, we report a sensory system for IOP assessment that uses a soft indentor with two asymmetrically deployed iontronic flexible pressure sensors to interact with the eyelid-eyeball in an eye-closed situation. Inspired by human fingertip assessment of softness, the sensory system extracts displacement-pressure information for soft evaluation, achieving high accuracy IOP monitoring (>96%). We further design and custom-make a portable and wearable ophthalmic tonometer based on the sensory system and demonstrate its high efficacy in IOP screening. This sensory system paves a way towards cost-effective, robust, and reliable IOP monitoring.

Integrated Fibrous Iontronic Pressure Sensors with High Sensitivity and Reliability for Human Plantar Pressure and Gait Analysis.

Flexible sensing systems (FSSs) designed to measure plantar pressure can deliver instantaneous feedback on human movement and posture. This feedback is crucial not only for preventing and controlling diseases associated with abnormal plantar pressures but also for optimizing athletes' postures to minimize injuries. The development of an optimal plantar pressure sensor hinges on key metrics such as a wide sensing range, high sensitivity, and long-term stability. However, the effectiveness of current flexible sensors is impeded by numerous challenges, including limitations in structural deformability, mechanical incompatibility between multifunctional layers, and instability under complex stress conditions. Addressing these limitations, we have engineered an integrated pressure sensing system with high sensitivity and reliability for human plantar pressure and gait analysis. It features a high-modulus, porous laminated ionic fiber structure with robust self-bonded interfaces, utilizing a unified polyimide material system. This system showcases a high sensitivity (156.6 kPa-1), an extensive sensing range (up to 4000 kPa), and augmented interfacial toughness and durability (over 150,000 cycles). Additionally, our FSS is capable of real-time monitoring of plantar pressure distribution across various sports activities. Leveraging deep learning, the flexible sensing system achieves a high-precision, intelligent recognition of different plantar types with a 99.8% accuracy rate. This approach provides a strategic advancement in the field of flexible pressure sensors, ensuring prolonged stability and accuracy even amidst complex pressure dynamics and providing a feasible solution for long-term gait monitoring and analysis.

3D printing of customized bioceramics for promoting bone tissue regeneration by regulating sympathetic nerve behavior.

Numerous studies have shown that there are multiple neural activities involved in the process of bone resorption and bone regeneration, and promoting osteogenesis by promoting neural network reconstruction is an effective strategy for repairing critical size bone defects. However, traumatic bone defects often cause activation of the sympathetic nervous system (SNS) in the damaged area, releasing excess catecholamines (CAs), resulting in a decrease in the rate of bone formation. Herein, a 3D-printed scaffold loaded with propranolol (PRN) is proposed to reduce CA concentrations in bone defect areas and promote bone regeneration through drug release. For this purpose, PRN-loaded methacrylated gelatin (GelMA) microspheres were mixed with low-concentration GelMA and perfused into a 3D-printed porous hydroxyapatite (HAp) scaffold. By releasing PRN, which can block ß-adrenergic receptors, it hinders the activation of sympathetic nerves and inhibits the release of excess CA by the SNS. At the same time, the composite scaffold recruits bone marrow mesenchymal stem cells (BMSCs) and promotes the differentiation of BMSCs in the direction of osteoblasts, which effectively promotes bone regeneration in the rabbit femoral condyle defect model. The results of the study showed that the release of PRN from the composite scaffold could effectively hinder the activation of sympathetic nerves and promote bone regeneration, providing a new strategy for the treatment of bone defects.

Ultrafast piezocapacitive soft pressure sensors with over 10 kHz bandwidth via bonded microstructured interfaces.

Flexible pressure sensors can convert mechanical stimuli to electrical signals to interact with the surroundings, mimicking the functionality of the human skins. Piezocapacitive pressure sensors, a class of most widely used devices for artificial skins, however, often suffer from slow response-relaxation speed (tens of milliseconds) and thus fail to detect dynamic stimuli or high-frequency vibrations. Here, we show that the contact-separation behavior of the electrode-dielectric interface is an energy dissipation process that substantially determines the response-relaxation time of the sensors. We thus reduce the response and relaxation time to ~0.04 ms using a bonded microstructured interface that effectively diminishes interfacial friction and energy dissipation. The high response-relaxation speed allows the sensor to detect vibrations over 10 kHz, which enables not only dynamic force detection, but also acoustic applications. This sensor also shows negligible hysteresis to precisely track dynamic stimuli. Our work opens a path that can substantially promote the response-relaxation speed of piezocapacitive pressure sensors into submillisecond range and extend their applications in acoustic range.

Transcriptomic Insights and Cytochrome P450 Gene Analysis in Kadsura coccinea for Lignan Biosynthesis.

Kadsura coccinea is a medicinal plant from the Schisandraceae family that is native to China and has great pharmacological potential due to its lignans. However, there are significant knowledge gaps regarding the genetic and molecular mechanisms of lignans. We used transcriptome sequencing technology to analyze root, stem, and leaf samples, focusing on the identification and phylogenetic analysis of Cytochrome P450 (CYP) genes. High-quality data containing 158,385 transcripts and 68,978 unigenes were obtained. In addition, 36,293 unigenes in at least one database, and 23,335 across five databases (Nr, KEGG, KOG, TrEMBL, and SwissProt) were successfully annotated. The KEGG pathway classification and annotation of these unigenes identified 10,825 categorized into major metabolic pathways, notably phenylpropanoid biosynthesis, which is essential for lignan synthesis. A key focus was the identification and phylogenetic analysis of 233 Cytochrome P450 (CYP) genes, revealing their distribution across 38 families in eight clans, with roots showing specific CYP gene expression patterns indicative of their role in lignan biosynthesis. Sequence alignment identified 22 homologous single genes of these CYPs, with 6 homologous genes of CYP719As and 1 of CYP81Qs highly expressed in roots. Our study significantly advances the understanding of the biosynthesis of dibenzocyclooctadiene lignans, offering valuable insights for future pharmacological research and development.

Creep-free polyelectrolyte elastomer for drift-free iontronic sensing.

Artificial pressure sensors often use soft materials to achieve skin-like softness, but the viscoelastic creep of soft materials and the ion leakage, specifically for ionic conductors, cause signal drift and inaccurate measurement. Here we report drift-free iontronic sensing by designing and copolymerizing a leakage-free and creep-free polyelectrolyte elastomer containing two types of segments: charged segments having fixed cations to prevent ion leakage and neutral slippery segments with a high crosslink density for low creep. We show that an iontronic sensor using the polyelectrolyte elastomer barely drifts under an ultrahigh static pressure of 500 kPa (close to its Young's modulus), exhibits a drift rate two to three orders of magnitude lower than that of the sensors adopting conventional ionic conductors and enables steady and accurate control for robotic manipulation. Such drift-free iontronic sensing represents a step towards highly accurate sensing in robotics and beyond.

Mechanical Tester Driven by Surface Tension.

The measurement of in-plane mechanical properties, such as Young's modulus and strength, of thin and stretchable materials has long been a challenge. Existing measurements, including wrinkle instability and nano indentation, are either indirect or destructive, and are inapplicable to meshes or porous materials, while the conventional tension test fails to measure the mechanical properties of nanoscale films. Here, we report a technique to test thin and stretchable films by loading a thin film afloat via differential surface tension and recording its deformation. We have demonstrated the method by measuring the Young's moduli of homogeneous films of soft materials including polydimethylsiloxane and Ecoflex and verified the results with known values. We further measured the strain distributions of meshes, both isotropic and anisotropic, which were otherwise nearly impossible to measure. The method proposed herein is expected to be generally applicable to many material systems that are thin, stretchable, and water-insoluble.

Therapeutic factors and biomaterial-based delivery tools for degenerative intervertebral disc repair.

Intervertebral disc degeneration (IDD) is the main cause of low back pain (LBP), which significantly impacts global wellbeing and contributes to global productivity declines. Conventional treatment approaches, encompassing conservative and surgical interventions, merely serve to postpone the advancement of IDD without offering a fundamental reversal. Consequently, there is an urgent demand for an effective approach to prevent the progression of IDD. Recent investigations focusing on the treatment of IDD utilizing diverse bioactive substances integrated within various biomaterials have exhibited promising outcomes. Various bioactive substances, encompassing conventional small molecule drugs, small molecule nucleic acids, and cell therapies, exhibit distinct capacities for repairing IDD. Additionally, various biological material delivery systems, such as nano micelles, microspheres, and hydrogels, possess diverse biological and release characteristics. Consequently, these diverse materials and drugs hold promise for advancing the treatment of IDD. This article aims to provide a concise overview of the IDD process and investigate the research advancements in biomaterials and bioactive substances for IDD treatment, delving into their mechanisms.

Hemostatic Tranexamic Acid-Induced Fast Gelation and Mechanical Reinforcement of Polydimethylacrylamide/Carboxymethyl Chitosan Hydrogel for Hemostasis and Wound Healing.

The combinational properties with excellent mechanical properties, adhesive performance, hemostatic ability, antibacterial action, and wound healing efficacy are highly desirable for injectable hydrogels' practical applications in hemorrhage control and wound closure, but designing one single hydrogel system integrating with such properties is still difficult. Herein, a simplified yet straightforward strategy is proposed to prepare an injectable and robust poly(N,N-dimethylacrylamide) (PDMAA)/carboxymethyl chitosan (CMCS) hydrogel induced by tranexamic acid (TXA). TXA not only promotes the rapid generation of free radicals but also introduces multiple hydrogen bonds into the hydrogel network. Moreover, as a common clinical hemostatic drug, TXA itself has excellent hemostatic effects. In addition, CMCS imparts sterilization and hemostasis effects to the hydrogel, thereby promoting wound healing. Besides, the amino and carboxyl groups on TXA molecules and the hydroxyl, amino, and carboxyl groups on CMCS molecules can form multiple hydrogen bonds with wet biological tissues, leading to good wet tissue adhesion of the hydrogel. As a result, the hydrogel with excellent mechanical properties (up to 1.83 MPa at 90% compression strain), adhesion performance (up to 18.7 kPa adhesion strength to porcine skin tissue), biocompatibility, hemostatic ability, antibacterial activity, and wound healing properties can be fabricated within several minutes. These combinational advantages enable the hydrogel to efficiently stop hemorrhage (blood loss amount: 110 mg; hemostasis time: 25 s) and promote the wound healing process (wound closure rate at 2 weeks: 83%), which can be verified using rat models of liver bleeding and infected full thickness skin defect. Overall, this facile strategy to design a hydrogel incorporating such unique advantages will greatly advance the hydrogel's clinical application in rapid hemostasis and wound healing.

Alveolar ridge preservation of two-wall bone defects using mineralized dentin matrix: An experimental pre-clinical study.

OBJECTIVES: To study bone healing of two-wall bone defects after alveolar ridge preservation using mineralized dentin matrix. MATERIALS AND METHODS: After distal roots extraction of second and fourth premolars (P2, P4) on one lateral mandible in 12 beagles, two-wall bone defects (5 × 5 × 5 mm) were surgically created distally to the remaining mesial roots of P2 and P4. A total of 24 sites were randomly allocated to three groups (implant material- time of execution): mineralized dentin matrix (MDM)-3 m (MDM + collagen membrane; 3 months), MDM-6 m (MDM particles + collagen membrane; 6 months), and C-6 m (collagen membrane only; 6 months). Clinical, radiographic, digital, and histological examinations were performed 3 and 6 months after surgery. RESULTS: The bone healing in MDM groups were better compared to Control group (volume of bone regenerated in total: 25.12 mm3 vs. 13.30 mm3, p = .046; trabecular volume/total volume: 58.84% vs. 39.18%, p = .001; new bone formation rate: 44.13% vs. 31.88%, p = .047). Vertically, the radiological bone level of bone defect in MDM-6 m group was higher than that in C-6 m group (vertical height of bone defect: 1.55 mm vs. 2.74 mm, p = .018). Horizontally, no significant differences in buccolingual bone width were found between MDM and C groups at any time or at any level below the alveolar ridge. The percentages of remaining MDM were <1% in both MDM-3 m and MDM-6 m groups. CONCLUSIONS: MDM improved bone healing of two-wall bone defects and might be considered as a socket fill material used following tooth extraction.

Air pollution and the risk of incident chronic kidney disease in patients with diabetes: An exposure-response analysis.

Impact of air pollution on incident chronic kidney disease (CKD) in diabetic patients is insufficiently studied. We aimed to examine exposure-response associations of PM2.5, PM10, PM2.5-10, NO2, and NOX with incident CKD in diabetic patients in the UK. We also widened exposure level of PM2.5 and examined PM2.5-CKD association in diabetic patients across the entire range of global concentration. Based on data from UK biobank cohort, we applied Cox proportional hazards models and the shape constrained health impact function to investigate the associations between air pollutants and incident CKD in diabetic patients. Global exposure mortality model was applied to combine the PM2.5-CKD association in diabetic patients in the UK with all other published associations. Multiple air pollutants were positively associated with incident CKD in diabetic patients in the UK, with hazard ratios (HRs) of 1.034 (95 %CI: 1.015-1.053) and 1.021 (95 %CI: 1.007-1.036) for every 1 µg/m3 increase in PM2.5 and PM10 concentration, and 1.113 (95 %CI: 1.053-1.177) and 1.058 (95 %CI: 1.027-1.091) for every 10 µg/m3 increase in NO2 and NOX concentration, respectively. For PM2.5-10, associations with CKD in diabetic patients did not reach the statistical significance. Exposure-response associations with CKD in diabetic patients showed a near-linear trend for PM2.5, PM10, NO2, and NOX in the UK, whereas PM2.5-DKD associations in the globe exhibited a non-linear increasing trend. This study supports that air pollution could significantly increase the risk of CKD onset in diabetic patients.

Regulating inflammation and apoptosis: A smart microgel gene delivery system for repairing degenerative nucleus pulposus.

The progression of intervertebral disc degeneration (IDD) is attributed to the gradual exacerbation of cellular apoptosis and impaired extracellular matrix (ECM) synthesis, both of which are induced by progressive inflammation. Therefore, it is crucial to address the inflammatory microenvironment and rectify the excessive apoptosis of nucleus pulposus cells (NPCs) to achieve intervertebral disc (IVD) regeneration. In this study, we devised a smart microgel gene delivery system that incorporates functionalized gene nanoparticles (NPs) for the purpose of IVD regeneration. siGrem1 was loaded into the NPs to enhance their antiapoptotic ability and protective effects. Furthermore, the encapsulation of HADA further endows the NPs (referred to as HSGN) with targeted delivery and anti-inflammatory effects, as well as reactive oxygen species (ROS) scavenging capacities. To create an microenvironment-responsive microgel system, phenylboronic acid-functionalized microspheres (referred to as M.S.) were fabricated and dynamically loaded with the HSGN. This microgel system (MHSGN), which is highly biocompatible, enables the sustained release of siGrem1, effectively modulating inflammation, scavenging ROS, and alleviating apoptosis in NPCs. These multifunctional capabilities promote the restoration of metabolic homeostasis within the nucleus pulposus ECM, ultimately leading to delayed IDD.

Effects of repetitive transcranial magnetic stimulation over the contralesional dorsal premotor cortex on upper limb function in severe ischaemic stroke: study protocol for a randomised controlled trial.

INTRODUCTION: Repetitive transcranial magnetic stimulation (rTMS) is an evidence-based treatment widely recommended to promote hand motor recovery after ischaemic stroke. However, the therapeutic efficacy of rTMS over the motor cortex in stroke patients is currently restricted and heterogeneous. This study aimed to determine whether excitatory rTMS over the contralesional dorsal premotor cortex (cPMd) facilitates the functional recovery of the upper limbs during the postacute stage of severe ischaemic stroke. METHODS AND ANALYSIS: This study will be conducted as a single-blind, controlled, randomised study, in which 44 patients with poststroke hemiplegia with a course of disease ranging from 1 week to 3 months and Fugl-Meyer upper limb score ≤22 will be enrolled. The study participants will be randomly assigned to groups A (n=22) and B (n=22). The two groups are based on routine rehabilitation training and drug treatment; group A will be treated with low-frequency (1 Hz) rTMS over the contralesional primary motor cortex (cM1), and group B will be treated with high-frequency (10 Hz) rTMS over cPMd. For 2 weeks, rTMS will be administered once a day, 5 days a week. The primary outcome is the Fugl-Meyer assessment of the upper limb. The secondary outcomes include the Arm Subscore of the Motricity Index, Hong Kong edition of Functional Test for the Hemiplegic Upper Extremity, Modified Barthel Index and Modified Ashworth Scale score of the paralysed pectoralis major and biceps brachii. Furthermore, data of diffusion tensor imaging and functional MRI will be collected. These outcomes will be assessed before and after the completion of the intervention. ETHICS AND DISSEMINATION: This study has been approved by the Ethics Committee of the First Affiliated Hospital of Nanjing Medical University (2020 SR-266). The findings of this study will be spread through networks of scientists, professionals and the general public as well as peer-reviewed scientific papers and presentations at pertinent conferences. TRIAL REGISTRATION NUMBER: ChiCTR2000038049.

Prevalence of overactive bladder in Chinese women: A systematic review and meta-analysis.

BACKGROUND: Overactive bladder (OAB) is a significant public health issue that adversely affects the quality of life of patients and imposes a significant socioeconomic burden, with varying prevalence rates across study populations in Chinese women. A systematic review and meta-analysis were conducted to estimate the prevalence of OAB in Chinese women. METHODS: Relevant published articles on the prevalence of OAB in Chinese women were searched through July 21, 2022, using PubMed, EMbase, The Cochrane Library, China Biology Medicine (CBM), China National Knowledge Infrastructure (CNKI), WanFang Data, and VIP databases. After the independent screening of articles, data extraction, and quality assessment of included studies by two investigators, a meta-analysis was performed using Stata 16.0 software, and the prevalence was determined using a random-effects model. To identify potential sources of heterogeneity, subgroup analyses were conducted with subgroup categories including age, Body Mass Index (BMI), region, and survey year. Publication bias was assessed by visually examining the funnel plot and Egger's test. RESULTS: Twenty studies were included in this meta-analysis. The results of the random-effects model indicated that the prevalence of OAB in Chinese women was 14% (95% Confidence Interval: 9%-18%). The prevalence increased significantly in the past decade (from 8% in pre-2006 to 18% in 2016-2021). A prevalence (18%) was observed among women aged 31-40 compared with other age groups. The BMI range of 24-27.9 (18%) was higher than the other groups. Additionally, the prevalence of this BMI range was comparatively higher in North China and Southwest China (21%) than in Central China and East China. In addition, publication bias was observed. CONCLUSIONS: OAB incidence has increased in Chinese women over the last two decades, affecting more than 20% of women aged 31-40 years and above. With the increasing prevalence of OAB, greater emphasis has been placed on implementing preventative and control measures.

Application and development of hydrogel biomaterials for the treatment of intervertebral disc degeneration: a literature review.

Low back pain caused by disc herniation and spinal stenosis imposes an enormous medical burden on society due to its high prevalence and refractory nature. This is mainly due to the long-term inflammation and degradation of the extracellular matrix in the process of intervertebral disc degeneration (IVDD), which manifests as loss of water in the nucleus pulposus (NP) and the formation of fibrous disc fissures. Biomaterial repair strategies involving hydrogels play an important role in the treatment of intervertebral disc degeneration. Excellent biocompatibility, tunable mechanical properties, easy modification, injectability, and the ability to encapsulate drugs, cells, genes, etc. make hydrogels good candidates as scaffolds and cell/drug carriers for treating NP degeneration and other aspects of IVDD. This review first briefly describes the anatomy, pathology, and current treatments of IVDD, and then introduces different types of hydrogels and addresses "smart hydrogels". Finally, we discuss the feasibility and prospects of using hydrogels to treat IVDD.

Designing customized temporomandibular fossa prosthesis based on envelope surface of condyle movement: validation via in silico musculoskeletal simulation.

Objective: This study presents an innovative articular fossa prosthesis generated by the envelope surface of condyle movement, and compares its mandible movements, muscle activities, and joint reaction forces with two temporomandibular joint (TMJ) prostheses using multibody musculoskeletal simulation. Methods: A healthy 23-year-old female was recruited for this study. Cone-beam computed tomographic (CBCT) was performed to reconstruct the mandibular bone geometry. A customized TMJ fossa prosthesis was designed based on the subject-specific envelope surface of condyle movement (ESCM). Mandibular kinematics and jaw-closing muscle electromyography (EMG) were simultaneously recorded during maximum jaw opening-closing movements. To validate our prosthesis design, a mandibular musculoskeletal model was established using flexible multibody dynamics and the obtained kinematics and EMG data. The Biomet fossa prosthesis and the ellipsoidal fossa prosthesis designed by imitating the lower limb prostheses were used for comparison. Simulations were performed to analyze the effects of different fossa prostheses on jaw opening-closing motions, mandibular muscle activation, and contact forces. Results: The maximum opening displacement for the envelope-based fossa prosthesis was greater than those for Biomet and ellipsoidal prostheses (36 mm, 35 mm, and 33 mm, respectively). The mandibular musculoskeletal model with ellipsoidal prosthesis led to dislocation near maximal jaw opening. Compared to Biomet, the envelope-based fossa reduced the digastric and lateral pterygoid activation at maximal jaw opening. It also reduced the maximal resistance to condylar sliding on the intact side by 63.2 N. Conclusion: A customized TMJ fossa prosthesis was successfully developed using the ESCM concept. Our study of musculoskeletal multibody modeling has highlighted its advantages and potential. The artificial fossa design successfully achieved a wider condylar range of motion. It also reduced the activation of jaw opening muscles on the affected side and resistance on the intact side. This study showed that an ESCM-based approach may be useful for optimizing TMJ fossa prostheses design.

A robotic sensory system with high spatiotemporal resolution for texture recognition.

Humans can gently slide a finger on the surface of an object and identify it by capturing both static pressure and high-frequency vibrations. Although modern robots integrated with flexible sensors can precisely detect pressure, shear force, and strain, they still perform insufficiently or require multi-sensors to respond to both static and high-frequency physical stimuli during the interaction. Here, we report a real-time artificial sensory system for high-accuracy texture recognition based on a single iontronic slip-sensor, and propose a criterion-spatiotemporal resolution, to corelate the sensing performance with recognition capability. The sensor can respond to both static and dynamic stimuli (0-400 Hz) with a high spatial resolution of 15 µm in spacing and 6 µm in height, together with a high-frequency resolution of 0.02 Hz at 400 Hz, enabling high-precision discrimination of fine surface features. The sensory system integrated on a prosthetic fingertip can identify 20 different commercial textiles with a 100.0% accuracy at a fixed sliding rate and a 98.9% accuracy at random sliding rates. The sensory system is expected to help achieve subtle tactile sensation for robotics and prosthetics, and further be applied to haptic-based virtual reality and beyond.

Fucoidan Ameliorates Ferroptosis in Ischemia-reperfusion-induced Liver Injury through Nrf2/HO-1/GPX4 Activation.

Background and Aims: Liver ischemia-reperfusion (IR) injury is a common pathological process in liver surgery. Ferroptosis, which is closely related to lipid peroxidation, has recently been confirmed to be involved in the pathogenesis of IR injury. However, the development of drugs that regulate ferroptosis has been slow, and a complete understanding of the mechanisms underlying ferroptosis has not yet been achieved. Fucoidan (Fu) is a sulfated polysaccharide that has attracted research interest due to its advantages of easy access and wide biological activity. Methods: In this study, we established models of IR injury using erastin as an activator of ferroptosis, with the ferroptosis inhibitor ferrostatin-1 (Fer-1) as the control. We clarified the molecular mechanism of fucoidan in IR-induced ferroptosis by determining lipid peroxidation levels, mitochondrial morphology, and key pathways in theta were involved. Results: Ferroptosis was closely related to IR-induced hepatocyte injury. The use of fucoidan or Fer-1 inhibited ferroptosis by eliminating reactive oxygen species and inhibiting lipid peroxidation and iron accumulation, while those effects were reversed after treatment with erastin. Iron accumulation, mitochondrial membrane rupture, and active oxygen generation related to ferroptosis also inhibited the entry of nuclear factor erythroid 2-related factor 2 (Nrf2) into the nucleus and reduced downstream heme oxygenase-1 (HO-1) and glutathione peroxidase 4 (GPX4) protein levels. However, fucoidan pretreatment produced adaptive changes that reduced irreversible cell damage induced by IR or erastin. Conclusions: Fucoidan inhibited ferroptosis in liver IR injury via the Nrf2/HO-1/GPX4 axis.

Arteriosclerosis Assessment Based on Single-Point Fingertip Pulse Monitoring Using a Wearable Iontronic Sensor.

Arteriosclerosis, which appears as a hardened and narrowed artery with plaque buildup, is the primary cause of various cardiovascular diseases such as stroke. Arteriosclerosis is often evaluated by clinically measuring the pulse wave velocity (PWV) using a two-point approach that requires bulky medical equipment and a skilled operator. Although wearable photoplethysmographic sensors for PWV monitoring are developed in recent years, likewise, this technique is often based on two-point measurement, and the signal can easily be interfered with by natural light. Herein, a single-point strategy is reported based on stable fingertip pulse monitoring using a flexible iontronic pressure sensor for heart-fingertip PWV (hfPWV) measurement. The iontronic sensor exhibits a high pressure-resolution on the order of 0.1 Pa over a wide linearity range, allowing the capture of characteristic peaks of fingertip pulse waves. The forward and reflected waves of the pulse are extracted and the time difference between the two waves is computed for hfPWV measurement using Hiroshi's method. Furthermore, a hfPWV-based model is established for arteriosclerosis evaluation with an accuracy comparable to that of existing clinical criteria, and the validity of the model is verified clinically. The work provides a reliable technique that can be used in wearable arteriosclerosis assessment systems.