RESUMEN
Objective: To identify objective metrics for evaluating the esthetics of facial profiles in skeletal Class III patients undergoing camouflage orthodontic treatment. Methods: Eighty Asian-Chinese patients classified as skeletal Class III were included. Thirty cephalometric measurements of pre- and posttreatment cephalograms were analyzed. Ten orthodontists assigned visual analog scale (VAS) scores to the pre- and posttreatment profiles based on standardized lateral photographs. Correlations between subjective VAS scores and objective measurements were assessed using Pearson correlation and stepwise multiple linear regression analysis. Results: Lower incisor (L1) protrusion, nasolabial angle, lower lip-E line distance, SNB angle, and L1 to AP plane were significantly correlated with VAS scores of pretreatment profiles of skeletal Class III patients. Factors such as retraction of the lower incisor, increased interincisal angle and overjet, reduction of lower lip-E line distance, as well as augmentation of the Z angle and nasolabial angle were significantly correlated with the changes in VAS scores post-camouflage orthodontic treatment. Stepwise multiple linear regression analysis revealed that pretreatment nasolabial angle, changes in the lower lip-E line distance, and pretreatment Pog-NB distance were the key factors influencing the posttreatment facial profile esthetics of skeletal Class III patients with camouflage orthodontic treatment. Conclusion: Several cephalometric measurements correlate with subjective facial esthetic evaluations of skeletal Class III patients. Changes in lower lip prominence, the pretreatment nasolabial angle, and Pog-NB distance are the main factors related to facial esthetics in skeletal Class III patients after camouflage orthodontic treatment.
Asunto(s)
Cefalometría , Cara , Maloclusión de Angle Clase III , Humanos , Femenino , Maloclusión de Angle Clase III/terapia , Masculino , Estudios Retrospectivos , Cara/anatomía & histología , Cara/patología , Adolescente , Adulto Joven , Adulto , Estética Dental , Ortodoncia CorrectivaRESUMEN
BACKGROUND/OBJECTIVES: To compare the biomechanical characteristics of maxillary molar distalization with clear aligners in conjunction with three types of miniscrew anchorage. MATERIALS/METHODS: Three-dimensional (3D) finite element models of maxillary molar distalization with clear aligners and three types of miniscrew anchorage were established, including (A) control group, (B) direct buccal miniscrew anchorage group, (C) direct palatal miniscrew anchorage group, and (D) indirect buccal miniscrew anchorage group. The 3D displacement of maxillary teeth and the principal stress (maximum tensile and compressive stress) on the root and periodontal ligament (PDL) during molar distalization were recorded. RESULTS: The tooth displacement pattern during maxillary molar distalization in the four groups showed similarities, including labial tipping of anterior teeth, mesial and buccal tipping of premolars, and distal and buccal tipping of molars, but with varying magnitudes. Group C exhibited the greatest molar distalization, with the first molar achieving 0.1334 mm of crown distalization. Group D demonstrated a notable buccal crown movement (0.0682 mm) and intrusion (0.0316 mm) of the first premolar. Compared to Groups A and B, Groups C and D showed less labial crown tipping of the central incisor. Group B showed the greatest amount of maxillary incisor intrusion (central incisor: 0.0145 mm, lateral incisor: 0.0094 mm). Moreover, Groups C and D displayed significantly lower levels of compressive and tensile stress in the roots and PDL of the maxillary central and lateral incisors. LIMITATION: Molar distalization is a dynamic process involving sequential tooth movement stages; however, our research primarily examined the tooth movement patterns in the initial aligner. CONCLUSIONS/IMPLICATIONS: The use of miniscrew anchorage, especially direct palatal miniscrew anchorage, may enhance the treatment efficacy of maxillary molar distalization with clear aligners, leading to increased molar distalization, reduced mesial movement of premolars, and minimized labial tipping of anterior teeth.
Asunto(s)
Maloclusión Clase II de Angle , Aparatos Ortodóncicos Removibles , Humanos , Maloclusión Clase II de Angle/terapia , Análisis de Elementos Finitos , Cefalometría/métodos , Técnicas de Movimiento Dental/métodos , Diente Molar , MaxilarRESUMEN
BACKGROUND: The evaluation of the facial profile of skeletal Class II patients with camouflage treatment is of great importance for patients and orthodontists. The aim of this study is to explore the key factors in evaluating the facial profile esthetics and to predict the posttreatment facial profile esthetics of skeletal Class II extraction patients. METHODS: 124 skeletal Class II extraction patients were included. The pretreatment and posttreatment cephalograms were analyzed by a trained expert orthodontist. The facial profile esthetics of pretreatment and posttreatment lateral photographs were evaluated by 10 expert orthodontists using the visual analog scale (VAS). The correlation between subjective facial profile esthetics and objective cephalometric measurements was assessed. Three machine-learning methods were used to predict posttreatment facial profile esthetics. RESULTS: The distances from lower and upper lip to the E plane and U1-APo showed the stronger correlation with profile esthetics. The changes in lower lip to the E plane and U1-APo during extraction exhibited the stronger correlation with changes in VAS score (r = - 0.551 and r = - 0.469). The random forest prediction model had the lowest mean absolute error and root mean square error, demonstrating a better prediction accuracy and fitting effect. In this model, pretreatment upper lip to E plane, pretreatment Pog-NB and the change of U1-GAll were the most important variables in predicting the posttreatment score of facial profile esthetics. CONCLUSIONS: The maxillary incisor protrusion and lower lip protrusion are key objective indicators for evaluating and predicting facial profile esthetics of skeletal Class II extraction patients. An artificial intelligence prediction model could be a new method for predicting the posttreatment esthetics of facial profiles.
Asunto(s)
Inteligencia Artificial , Maloclusión Clase II de Angle , Humanos , Proyectos Piloto , Estética Dental , Labio/anatomía & histología , Maxilar , Cefalometría/métodos , Maloclusión Clase II de Angle/diagnóstico por imagen , Maloclusión Clase II de Angle/terapiaRESUMEN
OBJECTIVE: To evaluate alveolar bone remodelling and stability of mandibular incisors in adult orthodontic extraction patients. MATERIALS AND METHODS: Cone-beam computed tomography images of 25 adult patients undergoing extraction were collected before orthodontic treatment (T1), after orthodontic treatment (T2), and after at least 1 year of retention (T3). The labial and lingual alveolar bone heights (ABH), thickness (ABT), and tooth movement of the mandibular incisors were measured during the retraction (T2-T1) and retention (T3-T2) periods. According to the tooth movement during the retention period, the mandibular incisors were further divided into stable and unstable groups, and the correlation between L1-BMe and stability was evaluated. RESULTS: The labial and lingual ABHs significantly increased after orthodontic treatment and decreased during the retention period. The lingual ABH was 7.36 ± 2.27 mm at T2 and 5.37 ± 1.98 mm at T3, indicating a great bone remodelling capacity. The labial ABT exhibited a significant increase during orthodontic treatment and a slight decrease during the retention period, while the lingual ABT showed an opposite trend. During the retention period, the root apex moved labially into the alveolar bone housing. L1-BMe significantly increased during orthodontic treatment and decreased during the retention period. Compared to the stable group, lingual ABH and L1-BMe at T2 was significantly higher, and lingual ABT was smaller in the unstable group. CONCLUSION: Post-treatment lingual alveolar bone defects of the mandibular incisors could recover to some extent during the retention period. There was a negative correlation between post-treatment L1-BMe and mandibular incisor stability.
RESUMEN
BACKGROUND: Alveolar bone defects, particularly palatal bone dehiscence (PBD) and labial bone fenestration (LBF), occur frequently as a result of retraction of the maxillary anterior teeth. The study aims to explore the long-term bone remodeling of maxillary anterior teeth in adult patients with post-orthodontic treatment PBD and LBF. MATERIALS AND METHODS: The study includes 24 adult patients with maxillary protrusion (8 males, 16 females) who were treated with extraction of four first premolars and had alveolar bone defects (PBD or LBF) in maxillary anterior teeth following orthodontic treatment. Cone-beam computed tomography imaging measurements were obtained before (T1), after (T2) orthodontic treatment, and after at least 1-year removable thermoplastic retainer retention (T3). The maxillary anterior teeth with PBD or LBF at T2 were divided into the PBD or LBF groups, respectively. The labial and palatal alveolar bone height (ABH), alveolar bone thickness (ABT), and movement of maxillary anterior teeth were measured during retraction (T2-T1) and retention (T3-T2) periods. RESULTS: The incidence of PBD and LBF in maxillary anterior teeth significantly increased after orthodontic treatment and decreased during the retention period. In the PBD group, the palatal ABH of all maxillary anterior teeth significantly increased from T1 to T2 but decreased from T2 to T3. The ABT of the maxillary central incisor and canine significantly increased on the palatal side and decreased on the labial side during the retention period. In the LBF group, the labial ABT of the maxillary central incisor at the apical level showed a significant decrease from T1 to T2, followed by an increase from T2 to T3. In both groups, the maxillary central incisor showed significant labial movement, with a relative intrusion during the retention period. CONCLUSION: For adult patients with maxillary protrusion, the alveolar bone defect of maxillary anterior teeth caused by orthodontic retraction significantly improved during the retention period, indicating good long-term bone remodeling. Our findings suggest that a combination of spontaneous reorientation of maxillary anterior teeth and bone remodeling contributed to alveolar bone covering in these patients.
Asunto(s)
Tomografía Computarizada de Haz Cónico , Incisivo , Masculino , Femenino , Humanos , Adulto , Estudios de Seguimiento , Estudios Prospectivos , Incisivo/diagnóstico por imagen , Maxilar/diagnóstico por imagen , Remodelación ÓseaRESUMEN
Acute kidney injury (AKI) is a prevalent pathological condition that is characterized by a precipitous decline in renal function. In recent years, a growing body of studies have demonstrated that renal maladaptation following AKI results in chronic kidney disease (CKD). Therefore, targeting the transition of AKI to CKD displays excellent therapeutic potential. However, the mechanism of AKI to CKD is mediated by multifactor, and there is still a lack of effective treatments. Ferroptosis, a novel nonapoptotic form of cell death, is believed to have a role in the AKI to CKD progression. In this study, we retrospectively examined the history and characteristics of ferroptosis, summarized ferroptosis's research progress in AKI and CKD, and discussed how ferroptosis participates in regulating the pathological mechanism in the progression of AKI to CKD. Furthermore, we highlighted the limitations of present research and projected the future evolution of ferroptosis. We hope this work will provide clues for further studies of ferroptosis in AKI to CKD and contribute to the study of effective therapeutic targets to prevent the progression of kidney diseases.
Asunto(s)
Lesión Renal Aguda , Ferroptosis , Insuficiencia Renal Crónica , Humanos , Ferroptosis/genética , Estudios Retrospectivos , Insuficiencia Renal Crónica/patología , Lesión Renal Aguda/metabolismo , Riñón/patologíaRESUMEN
INTRODUCTION: This study aimed to evaluate labial and palatal cortical bone remodeling (BR) characteristics and related aspects of maxillary incisors after retraction, as these aspects are still controversial among orthodontists. METHODS: Cortical BR and incisor movement of 44 patients (aged 26.18 ± 4.71 years) who underwent maxillary first premolar extraction and incisor retraction were analyzed using superimposed cone-beam computed tomography images. Labial BR/tooth movement (BT) ratios at the crestal, midroot (S2), and apical (S3) levels were compared using the Friedman test and pairwise comparisons. Multivariate linear regressions were used to explore the relationships between the labial BT ratio and several factors, including age, ANB angle, mandibular plane angle, and incisor movement patterns. According to the type of palatal cortical BR observed, the patients were divided into 3 groups: type I (no BR without root penetration of the original palatal border [RPB]), type II (BR with RPB), and type III (no BR with RPB). Student's t test was used to compare the type II and III groups. RESULTS: The mean labial BT ratios at all levels were <1.00 (0.68-0.89). This value at the S3 level was significantly smaller than that at the crestal and S2 levels (P <0.01). Multivariate linear regression indicated that the tooth movement pattern negatively correlates with the BT ratio at S2 and S3 levels (P <0.01). Type I was noted in 40.9% of the patients, and similar proportions exhibited type II (29.5%, 25.0%) or type III remodeling (29.5%, 34.1%). The retraction distance of the incisors in type III patients was significantly larger than in type II patients (P <0.05). CONCLUSIONS: The amount of cortical BR secondary to maxillary incisor retraction is less than the tooth movement. Bodily retraction may lead to lower labial BT ratios at the S3 and S2 levels. Roots penetrating the original border of the cortical plate are necessary for palatal cortical BR initiation.
Asunto(s)
Incisivo , Maxilar , Humanos , Incisivo/diagnóstico por imagen , Maxilar/diagnóstico por imagen , Tomografía Computarizada de Haz Cónico , Diente Premolar/diagnóstico por imagen , Remodelación ÓseaRESUMEN
INTRODUCTION: This study aimed to investigate the efficacy of molar distalization with or without anterior teeth retraction. METHODS: Forty-three patients who received maxillary molar distalization with clear aligners were retrospectively enrolled and further divided into 2 groups: a retraction group (with maxillary incisor retraction ≥2 mm in ClinCheck) and a nonretraction group (without anteroposterior movement or with the labial movement of the maxillary incisor in ClinCheck). Pretreatment and posttreatment models were collected and laser-scanned to obtain the virtual models. Three-dimensional digital assessments of molar movement, anterior retraction and arch width were analyzed in the reverse engineering software Rapidform 2006. To calculate the efficacy of tooth movement, the achieved tooth movement assessed on the virtual model was compared with the predicted tooth movement in ClinCheck. RESULTS: The achieved efficacy rates of molar distalization for the maxillary first and second molars were 36.48% and 41.94%, respectively. There was a significant difference in molar distalization efficacy between the retraction group (31.50% at the first molar and 35.63% at the second molar) and the nonretraction group (48.14% at the first molar and 52.51% at the second molar). In the retraction group, the efficacy of incisor retraction was 56.10%. The efficacy of dental arch expansion was more than 100% at the first molar levels in the retraction group and at the second premolar and first molar levels in the nonretraction group. CONCLUSIONS: There is a discrepancy between the outcome and the predicted maxillary molar distalization with clear aligners. The efficacy of molar distalization with clear aligners was significantly affected by anterior teeth retraction, and the arch width significantly increased at the premolar and molar levels.
Asunto(s)
Maloclusión Clase II de Angle , Aparatos Ortodóncicos Removibles , Humanos , Estudios Retrospectivos , Maloclusión Clase II de Angle/terapia , Diente Molar , Técnicas de Movimiento Dental/métodos , Maxilar , CefalometríaRESUMEN
This study aims to investigate hard and soft tissue asymmetry in skeletal Class III patients to elucidate how soft tissue thickness alters overall asymmetry and whether menton deviation is correlated with bilateral differences in hard and soft tissue prominence and soft tissue thickness. The cone-beam computed tomography data of 50 skeletal Class III adults were divided based on menton deviation into symmetric (n = 25; deviation ≤ 2.0 mm) and asymmetric (n = 25; deviation > 2.0 mm) groups. Forty-four corresponding hard and soft tissue points were identified. Bilateral hard and soft tissue prominence and soft tissue thickness were compared using paired t-tests. The correlations between bilateral differences in these variables and menton deviation were examined using Pearson's correlation analysis. In the symmetric group, no significant bilateral differences in soft and hard tissue prominence and soft tissue thickness were observed. In the asymmetric group, both hard and soft tissue prominence were significantly greater on the deviated side than the non-deviated side at most of the points; however, no significant differences in soft tissue thickness were detected except at point 9 (ST9/ST'9, p = 0.011). The difference of hard and soft tissue prominence at point 8 (H8/H'8 and S8/S'8) was positively correlated with menton deviation, whereas the soft tissue thickness at point 5 (ST5/ST'5) and point 9 (ST9/ST'9) was negatively correlated with menton deviation (p = 0.05). Soft tissue thickness does not affect overall asymmetry in the presence of underlying hard tissue asymmetry. Soft tissue thickness at the centre of the ramus may be correlated with the degree of menton deviation in patients with asymmetry; however, this correlation needs to be confirmed by further studies.
RESUMEN
OBJECTIVE: To compare the three-dimensional (3-D) movement of maxillary teeth in response to three common miniscrew anchorage systems in extraction patients with maxillary dentoalveolar protrusion. MATERIALS AND METHODS: The study employed a randomized controlled single-blinded design with three arms. Thirty extraction patients who required maximum anchorage to retract maxillary anterior teeth were included and randomly allocated into three treatment groups: space closure with direct miniscrew anchorage and low crimpable hooks (DL group), indirect miniscrew anchorage and low crimpable hooks (IL group), and direct miniscrew anchorage and high crimpable hooks (DH group). Cone beam computed tomography (CBCT) images of all included patients were obtained immediately before (T0) and after (T1) space closure. The outcomes were 3-D positional changes of maxillary central incisor, lateral incisor, canine, second premolar, and first molar. The repeated measures analysis of variance with post hoc LSD test was used to evaluate differences among groups. RESULTS: A significant intrusion (- 1.34 mm; 95% CI, - 1.60 mm, 1.08 mm) and buccal (- 6.92°; 95% CI, - 8.67°, - 5.13°) and distal (4.90°; 95% CI, 3.75°, 6.04°) inclination of the maxillary first molars were observed in the DL group, compared to the other two groups. The mesial movement (- 0.40 mm; 95% CI, - 0.83 mm, - 0.03 mm) of the maxillary first molars was found in the IL group, while the DL (0.44 mm; 95% CI, 0.15 mm, 0.73 mm) and IL (0.62 mm; 95% CI, 0.28 mm, 0.96 mm) groups exhibited distal movement. In the DH group, the lingual inclination changes of maxillary central incisor (5.04°; 95% CI, 2.82°, 7.26°) were significantly lower, which is indicative of good lingual root torque control of the maxillary anterior teeth. CONCLUSION: Three miniscrew anchorage systems produced significantly different 3-D maxillary tooth movement. The maxillary first molars were significantly buccally and distally inclined and intruded in patients using direct miniscrew anchorages with low crimpable hooks. Direct miniscrew anchorages with high crimpable hooks could help to achieve better lingual root torque control of the maxillary incisors. Trial registration The trial was registered at www.chictr.org.cn (ChiCTR1900026960). Registered 27 October 2019.
Asunto(s)
Métodos de Anclaje en Ortodoncia , Métodos de Anclaje en Ortodoncia/métodos , Técnicas de Movimiento Dental/métodos , Maxilar/diagnóstico por imagen , Incisivo/diagnóstico por imagen , Diente Molar/diagnóstico por imagen , Diente Molar/cirugíaRESUMEN
BACKGROUND: Previous studies of pulpal blood flow (PBF) changes in anterior teeth have been limited in the early phase of orthodontic treatment; less is known about the blood supply of anterior teeth in bimaxillary protrusion patients after orthodontic retraction. METHODS: Fifty bimaxillary protrusion patients (25 orthodontic patients ready for debonding and 25 non-orthodontic patients) were selected as study participants. The PBF of maxillary and mandibular anterior teeth were measured using laser Doppler flowmetry. For orthodontic patients, the PBF was measured at 1 day (T1), 1 month (T2), and 3 months (T3) after fixed appliance removal. Non-orthodontic patient PBF was measured as a control. Cone-beam computed tomography (CBCT) examinations before and after orthodontic treatment were performed for orthodontic patients to measure the root resorption. The anterior teeth in orthodontic group were further divided into subgroups according to root resorption and patient age. RESULTS: At T1 and T3, PBF changes did not differ significantly between the orthodontic and non-orthodontic groups. Maxillary lateral incisor, maxillary central incisor, and mandibular lateral incisor PBFs at T2 were significantly higher in the orthodontic group (P = 0.048, P = 0.04, and P = 0.021). No significant difference in PBF was found between the root resorption and non-resorption subgroups at any time point. Adolescent patients showed a higher PBF in the maxillary lateral incisor at T2 (12.23 ± 3.48) relative to that at T1 (9.10 ± 3.76) and T3 (9.81 ± 2.80) with statistically significant difference (P = 0.020). CONCLUSION: For bimaxillary protrusion patients with four premolars extraction, PBF in the maxillary anterior teeth increased transiently after orthodontic appliance removal and then returned to non-orthodontic levels 3 months later. This effect was more pronounced in adolescents. The PBF of anterior teeth after orthodontic retraction may not be influenced by root resorption.
Asunto(s)
Pulpa Dental , Maloclusión , Resorción Radicular , Adolescente , Humanos , Pulpa Dental/diagnóstico por imagen , Pulpa Dental/irrigación sanguínea , Incisivo/diagnóstico por imagen , Maxilar/diagnóstico por imagen , Estudios ProspectivosRESUMEN
BACKGROUND: Previous studies have reported inconsistent effects of premolar extraction on the oropharynx and hyoid bones. Currently, no strong evidence is available regarding the effect of extraction on upper airway size. Hence, the aim of this study was to analyse the effects of first premolar extraction on the oropharynx and hyoid bone positions in female adult patients, and further explored differences in oropharynx and hyoid bone changes among skeletal patterns. METHODS: The study population included 40 female adult patients who did not undergo extraction and 120 female adult patients who underwent extraction of four premolars; the including patients had four distinct sagittal and vertical skeletal patterns. Cone-beam computed tomography was performed before (T0) and after (T1) orthodontic treatment. Eight oropharynx variables and five hyoid bone variables were measured using Dolphin 3D Imaging software. Paired and independent t-tests were used to analyse measurements between timepoints and groups, respectively. RESULTS: The oropharynx volume increased significantly in the extraction group; changes did not differ significantly between extraction and non-extraction groups. Oropharynx variables did not differ significantly at T0 among the four skeletal pattern groups. After orthodontic extraction treatment, the oropharynx volume increased significantly in the class I-norm and class I-hyper subgroups, but not in the class II-norm and class II-hyper subgroups. Significant increases were observed in the oropharynx volume and most constricted axial area from T0 to T1 in the moderate retraction group, but not in the maximum retraction group. Extraction patients exhibited significant posterior movement of the hyoid, particularly among maximum retraction patients. CONCLUSIONS: In female adult patients, first premolar extraction tends to increase the oropharynx size and cause posterior movement of the hyoid bone, particularly in skeletal class I patients. For skeletal class II and hyperdivergent patients with a narrow oropharynx, first premolar extraction does not negatively influence oropharynx size or hyoid bone position. The differences of oropharyngeal changes between moderate retraction patients and maximum retraction patients were not significant.
Asunto(s)
Diente Premolar , Huesos , Tomografía Computarizada de Haz Cónico , Hueso Hioides , Orofaringe , Extracción Dental , Adulto , Diente Premolar/diagnóstico por imagen , Diente Premolar/cirugía , Huesos/anatomía & histología , Huesos/diagnóstico por imagen , Tomografía Computarizada de Haz Cónico/métodos , Femenino , Humanos , Hueso Hioides/diagnóstico por imagen , Orofaringe/diagnóstico por imagen , Estudios RetrospectivosRESUMEN
INTRODUCTION: Patients with severe periodontitis typically present with pathologic tooth migration. To improve esthetics and masticatory function, orthodontic treatment is required. Research on periodontal orthodontic treatment has been sparse, particularly from the microbial perspective. Hence, we analyzed the microbial and clinical changes in patients with well-controlled periodontitis in the early stage of orthodontic treatment. METHODS: Ten patients with well-controlled periodontitis were asked to collect saliva before and 1 and 3 months after appliance placement (T0, T1, and T2, respectively) and underwent clinical examinations before and 1, 3, and 6 months after appliance placement (T0, T1, T2, and T3, respectively). The microbial community of saliva was analyzed by 16S rRNA gene sequencing. Gingival index, the plaque index, and the probing pocket depth were clinically assessed. RESULTS: The plaque index significantly increased from T0 to T1 and decreased at T2 and T3. The probing pocket depth and gingival index increased slightly at T2, but not significantly, in both the high-risk site and low-risk site. The alpha and beta diversity increased at T1. The microbial community structure was similar at T0 and T2. The relative abundance of core genera and periodontal pathogens was stable during the initial 3 months of orthodontic treatment. CONCLUSIONS: The orthodontic appliance promoted plaque accumulation and altered the microbial community of patients with well-controlled periodontitis during the first month of orthodontic treatment. The microbial community returned to the basal composition at 3 months after appliance placement, and the periodontal inflammation during the 6-months orthodontic treatment was under control.
Asunto(s)
Microbiota , Periodontitis , Índice de Placa Dental , Estética Dental , Humanos , ARN Ribosómico 16S/genéticaRESUMEN
Orthodontic tooth movement is achieved by periodontal tissue remodeling triggered by mechanical force. It is essential to investigate the reaction of periodontal ligament stem cells (PDLSCs) for improving orthodontic therapeutic approaches. Autophagy is an endogenous defense mechanism to prevent mechanical damage of environmental change. Long non-coding RNAs (lncRNAs) are key regulators in gene regulation, but their roles are still largely uncharacterized in the reaction of PDLSCs during orthodontic tooth movement. In this study, we showed that autophagy was significantly induced in PDLSCs under compressive force, as revealed by the markers of autophagy, microtubule-associated protein light chain 3 (LC3) II/I and Beclin1, and the formation of autophagosomes. After the application of compressive force, lncRNA FER1L4 was strongly upregulated. Overexpression of FER1L4 increased the formation of autophagosome and autolysosomes in PDLSCs, while knockdown of FER1L4 reversed the autophagic activity induced by mechanical force. In mechanism, FER1L4 inhibited the phosphorylation of protein kinase B (AKT) and subsequently increased the nuclear translocation of forkhead box O3 (FOXO3) and thus mediated autophagic cascades under compressive strain. In mouse model, the expression of Lc3 as well as Fer1l4 was increased in the pressure side of periodontal ligament during tooth movement. These findings suggest a novel mechanism of autophagy regulation by lncRNA during periodontal tissue remodeling of orthodontic treatment.
RESUMEN
The association between tooth movement and remodelling of surrounding bone is controversial. To analyse the effect of tooth movement on alveolar bone changes in maxillary and mandibular anterior teeth by cone-beam computed tomography (CBCT). The Embase, Cochrane Library and Medline databases were searched without any language restrictions. Longitudinal studies using CBCT to observe alveolar bone changes of maxillary and mandibular anterior teeth during orthodontic treatment were included. Two independent reviewers performed the study selection, data extraction and methodological quality assessment. A total of 26 studies were included in this review, 14 of which were eligible for quantitative synthesis. In extraction cases, meta-analysis showed vertical bone loss on the labial (0.36 mm) and lingual (0.94 mm) sides of maxillary incisors, and lingual bone thickness decreased significantly at the cervical level (0.57 mm). In non-extraction cases, vertical alveolar bone loss was significant on the labial side (0.97 mm) and lingual side (0.86 mm) of mandibular incisors. Subgroup analysis for skeletal class III patients indicated that vertical alveolar bone loss was 1.16 mm on the labial side and 0.83 mm on the lingual side of mandibular incisors. The absence of high-quality studies and the high heterogeneity of the included studies were limitations of this systematic review and meta-analysis. Based on limited evidence, alveolar bone height and thickness, especially at the cervical level, decreased during both labial and lingual movement of anterior teeth.
Asunto(s)
Mandíbula , Maxilar , Tomografía Computarizada de Haz Cónico , Humanos , Incisivo/diagnóstico por imagen , Maxilar/diagnóstico por imagen , Técnicas de Movimiento Dental/efectos adversosRESUMEN
OBJECTIVE: To investigate and compare the effects of maxillary protraction therapy on Class III patients with unilateral cleft lip and palate (UCLP) and Class III patients with noncleft. DESIGN: Prospective controlled clinical trial. PATIENTS: Twenty-six Class III patients with UCLP (mean age: 10.32 ± 1.29 years) and 26 Class III patients with noncleft (mean age: 9.82 ± 1.03 years) were included and treated with maxillary protraction therapy. INTERVENTIONS: Maxillary protraction therapy was performed with an intraoral Hyrax appliance and extraoral facemask. Cone beam computed tomography scans were taken before and after treatment. Pretreatment skeletal and dental characteristics and treatment changes were analyzed and compared. RESULTS: The average treatment duration was 18.44 ± 4.16 months in the UCLP group, which was substantially longer than the 12.46 ± 4.03-month average treatment duration in the noncleft group (P < .001). No significant difference was found in the maxillary changes (length, advancement of point A, and SNA angle) and improvement of intermaxillary relationship (ANB angle) between the 2 groups. The UCLP group had 1.40° more mandibular clockwise rotation (P = .034). Regarding dental changes, the UCLP group had more upper incisor proclination (P = .006) and less lower incisor retroclination (P = .023). CONCLUSIONS: Approximately extended maxillary protraction therapy in patients with UCLP could be as effective as in patients with noncleft. Further study is required to follow patients until completion of growth to elucidate the long-term stability of the treatment.
Asunto(s)
Labio Leporino , Fisura del Paladar , Maloclusión de Angle Clase III , Cefalometría , Niño , Labio Leporino/diagnóstico por imagen , Labio Leporino/terapia , Fisura del Paladar/diagnóstico por imagen , Fisura del Paladar/terapia , Aparatos de Tracción Extraoral , Humanos , Maloclusión de Angle Clase III/diagnóstico por imagen , Maloclusión de Angle Clase III/terapia , Maxilar , Estudios ProspectivosRESUMEN
PURPOSE: Periodontitis is the leading cause of tooth loss. The role of long non-coding RNA (lncRNA) in periodontal inflammation remains unclear. The aim of this study was to investigate the role of lncRNA H19 in periodontitis and its possible regulation of autophagy in periodontitis. MATERIAL AND METHODS: Inflammation level was determined by quantitative reverse-transcription polymerase chain reaction (qRT-PCR) and enzyme-linked immunosorbent assay (ELISA) in periodontal ligament cells (PDLCs). Western blotting, flow cytometric analysis, and immunofluorescence staining were used to detect the autophagy flux. Overexpression or knockdown of H19 was used to confirm its function. Ligature-induced periodontitis model in mice and periodontitis-affected human gingival tissue were used in vivo. RNA sequencing was performed to determine the differentially expressed genes. RESULTS: Autophagy was significantly increased in PDLCs after inflammatory stimulation as well as in a ligature-induced periodontitis model in mice and periodontitis-affected human gingival tissue. During the inflammatory process, H19 expression was also significantly upregulated. Further, the levels of autophagic markers were significantly upregulated after overexpressing H19 in PDLCs, and the increased autophagic activity induced by inflammatory stimulation was reversed by H19 knockdown. RNA sequencing showed that the expression profiles of mRNAs were significantly altered after H19 overexpression, and the differentially expressed genes were enriched in the PI3K/AKT signaling pathway, which was confirmed by the decreased p-AKT protein expression in the H19 overexpression group. CONCLUSION: Periodontal inflammation activates autophagy flux, and H19 mediates the activation of autophagy via AKT pathway in periodontitis. This study expands our understanding of molecular regulation in periodontitis.
RESUMEN
OBJECTIVE: Secondary alveolar bone grafting (SABG) has become the principal means of treating alveolar cleft defects. We reviewed the literature on 2-dimensional (2-D) and 3-dimensional (3-D) radiographic evaluation of SABG in patients with cleft lip and alveolus (CLA) and those with cleft lip and palate (CLP), with a focus on outcomes. STUDY DESIGN: We searched several electronic databases to the end of 2018. The inclusion criteria were nonsyndromic CLA or CLP treated with SABG at an optimal age and evaluation performed no earlier than 3 months postoperatively. Study quality was evaluated by using the Methodological Index for Non-Randomized Studies and the Cochrane Collaboration tool. RESULTS: We identified 282 articles from 3 databases. Full texts of 102 articles were analyzed, and finally 11 articles were included for qualitative analysis. 2-D and 3-D radiographic evaluations were performed in each study. Traditional 2-D radiographic imaging tended to overestimate success; bone resorption in the labiopalatal direction was inaccurate in 2-D views. Most articles were observational in nature and of moderate methodologic quality. CONCLUSIONS: 2-D evaluation tended to overestimate SABG outcomes; 3-D evaluation was more precise and reliable than 2-D radiography. A gold standard 3-D evaluation protocol is required for quantitative comparisons in the future.
Asunto(s)
Injerto de Hueso Alveolar , Labio Leporino , Fisura del Paladar , Trasplante Óseo , Labio Leporino/diagnóstico por imagen , Labio Leporino/cirugía , Fisura del Paladar/diagnóstico por imagen , Fisura del Paladar/cirugía , HumanosRESUMEN
BACKGROUND: Periodontal ligament stromal cells (PDLSCs) are ideal cell sources for periodontal tissue repair and regeneration, but little is known about what determines their osteogenic capacity. Long non-coding RNAs (lncRNAs) are important regulatory molecules at both transcriptional and post-transcriptional levels. However, their roles in the osteogenic differentiation of PDLSCs are still largely unknown. METHODS: The expression of lncRNA Fer-1-like family member 4 (FER1L4) during the osteogenic differentiation of PDLSCs was detected by quantitative reverse transcription polymerase chain reaction. Overexpression or knockdown of FER1L4 was used to confirm its regulation of osteogenesis in PDLSCs. Alkaline phosphatase and Alizarin red S staining were used to detect mineral deposition. Dual luciferase reporter assays were used to analyze the binding of miR-874-3p to FER1L4 and vascular endothelial growth factor A (VEGFA). Bone regeneration in critical-sized calvarial defects was assessed in nude mice. New bone formation was analyzed by micro-CT, hematoxylin and eosin staining, Masson's trichrome staining, and immunohistochemical analyses. RESULTS: FER1L4 levels increased gradually during consecutive osteogenic induction of PDLSCs. Overexpression of FER1L4 promoted the osteogenic differentiation of PDLSCs, as revealed by alkaline phosphatase activity, Alizarin red S staining, and the expression of osteogenic markers, whereas FER1L4 knockdown inhibited these processes. Subsequently, we identified a predicted binding site for miR-874-3p on FER1L4 and confirmed a direct interaction between them. Wild-type FER1L4 reporter activity was significantly inhibited by miR-874-3p, whereas mutant FER1L4 reporter was not affected. MiR-874-3p inhibited osteogenic differentiation and reversed the promotion of osteogenesis in PDLSCs by FER1L4. Moreover, miR-874-3p targeted VEGFA, a crucial gene in osteogenic differentiation, whereas FER1L4 upregulated the expression of VEGFA. In vivo, overexpression of FER1L4 led to more bone formation compared to the control group, as demonstrated by micro-CT and the histologic analyses. CONCLUSION: FER1L4 positively regulates the osteogenic differentiation of PDLSCs via miR-874-3p and VEGFA. Our study provides a promising target for enhancing the osteogenic potential of PDLSCs and periodontal regeneration.