Upgrading Polyolefin Plastic Waste into Multifunctional Porous Graphene using Silicone-Assisted Direct Laser Writing.

The widespread use of plastics, especially polyolefin including polyethylene and polypropylene, has led to severe environmental crises. Chemical recycling, a promising solution for extracting value from plastic waste, however, is underutilized due to its complexity. Here, a simple approach, silicone-assisted direct laser writing (SA-DLW) is developed, to upgrade polyolefin plastic waste into multifunctional porous graphene, called laser-induced graphene (LIG). This method involves infiltrating polyolefins with silicone, which retards ablation during the DLW process and supplies additional carbon atoms, as confirmed by experimental and molecular dynamic results. A remarkable conversion yield of 38.3% is achieved. The upgraded LIG exhibited a porous structure and high conductivity, which is utilized for the fabrication of diverse energy and electronic devices with commendable performance. Furthermore, the SA-DLW technique is versatile for upgrading plastic waste in various types and forms. Upgrading plastic waste in the form of fabric has significantly simplified pre-treatment. Finally, a wearable flex sensor is fabricated on the non-woven fabric of a discarded medical mask, which is applied for gesture monitoring. This work offers a simple but effective solution to upgrade plastic waste into valuable products, contributing to the mitigation of environmental challenges posed by plastic pollution.

Application of Machine Learning in Material Synthesis and Property Prediction.

Material innovation plays a very important role in technological progress and industrial development. Traditional experimental exploration and numerical simulation often require considerable time and resources. A new approach is urgently needed to accelerate the discovery and exploration of new materials. Machine learning can greatly reduce computational costs, shorten the development cycle, and improve computational accuracy. It has become one of the most promising research approaches in the process of novel material screening and material property prediction. In recent years, machine learning has been widely used in many fields of research, such as superconductivity, thermoelectrics, photovoltaics, catalysis, and high-entropy alloys. In this review, the basic principles of machine learning are briefly outlined. Several commonly used algorithms in machine learning models and their primary applications are then introduced. The research progress of machine learning in predicting material properties and guiding material synthesis is discussed. Finally, a future outlook on machine learning in the materials science field is presented.

Research Progress on the Preparation and Applications of Laser-Induced Graphene Technology.

Graphene has been regarded as a potential application material in the field of new energy conversion and storage because of its unique two-dimensional structure and excellent physical and chemical properties. However, traditional graphene preparation methods are complicated in-process and difficult to form patterned structures. In recent years, laser-induced graphene (LIG) technology has received a large amount of attention from scholars and has a wide range of applications in supercapacitors, batteries, sensors, air filters, water treatment, etc. In this paper, we summarized a variety of preparation methods for graphene. The effects of laser processing parameters, laser type, precursor materials, and process atmosphere on the properties of the prepared LIG were reviewed. Then, two strategies for large-scale production of LIG were briefly described. We also discussed the wide applications of LIG in the fields of signal sensing, environmental protection, and energy storage. Finally, we briefly outlined the future trends of this research direction.

[Ammonia Nitrogen Removal Performance with Parallel Operation of Conventional and Inverted A2/O Sewage Treatment Processes in Winter].

Ammonia nitrogen (NH4+-N) removal capacities of the A2/O and inverted A2/O processes were analyzed with the same inlet and parallel operation during winter. When the operating water temperature was 14℃, the inverted A2/O process exhibited lower NH4+-N removal from the volumetric load[0.13 kg ·(m3 ·d)-1vs. 0.29 kg ·(m3 ·d)-1] and a lower ammonia oxidation rate (AOR)[0.07 kg ·(kg ·d)-1 vs. 0.11 kg ·(kg ·d)-1] than the A2/O process, whereas the two processes exhibited similar performance at 26℃.The quantitative results for the ammonia oxidizing bacteria (AOB) population were almost the same in the two parallel processes (3.2%±0.24% for the inverted A2/O process and 3.4%±0.31% for the A2/O process). Clone library analysis showed that at low temperatures, the inverted A2/O process had a lower capacity for ammonia nitrogen removal than A2/O process. This is because the particular AOB species[spirillum (Nitrosospira)] facilitated the slower AOR type (K-growth strategy) of nitrosation in the inverted A2/O process, whereas in the A2/O process, the faster AOR type (r-growth strategy) of nitrosation was facilitated by bacterium (Nitrosomonas). At 26℃, the dominant species in the two processes were Nitrosomonas. Through comprehensive analysis of the pollutants during the removal process, we found that although temperature is the leading cause of AOB advantage in species succession, the changes in the inverted A2/O process structure, caused by the aerobic unit, resulted in high COD load and high NH4+-N concentration, which were unfavorable for the growth of AOB. This shows that under conventional sewage conditions, the K-growth strategy is advantageous for the AOB species. Therefore, the structure of the inverted A2/O process for heterotrophic bacteria (phosphorus accumulating bacteria and denitrifying bacteria) indirectly affects the population distribution and succession of autotrophic ammonia-oxidizing bacteria, through COD load and other factors, thereby leading to weakened nitrification capacity at low temperatures.

Magnetically Recyclable Wool Keratin Modified Magnetite Powders for Efficient Removal of Cu2+ Ions from Aqueous Solutions.

The treatment of wastewater containing heavy metals and the utilization of wool waste are very important for the sustainable development of textile mills. In this study, the wool keratin modified magnetite (Fe3O4) powders were fabricated by using wool waste via a co-precipitation technique for removal of Cu2+ ions from aqueous solutions. The morphology, chemical compositions, crystal structure, microstructure, magnetism properties, organic content, and specific surface area of as-fabricated powders were systematically characterized by various techniques including field emission scanning electron microscopy (FESEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), vibrating sample magnetometer (VSM), thermogravimetric (TG) analysis, and Brunauer-Emmett-Teller (BET) surface area analyzer. The effects of experimental parameters such as the volume of wool keratin hydrolysate, the dosage of powder, the initial Cu2+ ion concentration, and the pH value of solution on the adsorption capacity of Cu2+ ions by the powders were examined. The experimental results indicated that the Cu2+ ion adsorption performance of the wool keratin modified Fe3O4 powders exhibited much better than that of the chitosan modified ones with a maximum Cu2+ adsorption capacity of 27.4 mg/g under favorable conditions (0.05 g powders; 50 mL of 40 mg/L CuSO4; pH 5; temperature 293 K). The high adsorption capacity towards Cu2+ ions on the wool keratin modified Fe3O4 powders was primarily because of the strong surface complexation of -COOH and -NH2 functional groups of wool keratins with Cu2+ ions. The Cu2+ ion adsorption process on the wool keratin modified Fe3O4 powders followed the Temkin adsorption isotherm model and the intraparticle diffusion and pseudo-second-order adsorption kinetic models. After Cu2+ ion removal, the wool keratin modified Fe3O4 powders were easily separated using a magnet from aqueous solution and efficiently regenerated using 0.5 M ethylene diamine tetraacetic acid (EDTA)-H2SO4 eluting. The wool keratin modified Fe3O4 powders possessed good regenerative performance after five cycles. This study provided a feasible way to utilize waste wool textiles for preparing magnetic biomass-based adsorbents for the removal of heavy metal ions from aqueous solutions.

[Distribution of Antibiotic Concentration in Domestic Wastewater Treatment Facilities in Villages and Towns].

Antibiotics discharged into the environment cause increased environmental resistance. Four types of antibiotics (quinolones, tetracyclines, macrolides, and ß-lactams) were selected for this study. In a comparison with the municipal wastewater plant, the concentration and removal of antibiotics in influent and effluent of domestic wastewater treatment facilities of different scales in villages and towns was investigated using high-performance liquid chromatography (HPLC) and tandem mass spectrometry (MS). The results showed that the highest amount of ofloxacin in rural wastewater treatment facilities reached 32663.5 ng·L-1. Due to the different situations of influent fluctuation, discharge requirements, and management between urban and rural wastewater plants, only 33% of the rural domestic wastewater facilities detected an antibiotics removal rate of more than 60%. The effective removal of some antibiotics can be achieved when the rural domestic wastewater treatment facilities maintain the standard discharge of conventional pollutants.

Simultaneous Preparation and Comparison of the Osteogenic Effects of Epimedins A - C and Icariin from Epimedium brevicornu.

In this study, epimedins A-, B-, and C-, and icariin-rich extracts were simultaneously isolated from Epimedium brevicornu Maxim. through a convenient four-stage process consisting of solvent extraction, macroporous resin column pre-concentration, extraction fractionation, and reversed-phase (RP) silica gel column chromatography. Single factor experiments and response surface methodology (RSM) were used to optimize the preparation conditions. In the final products, the purities of epimedins A - C and icariin were 23.04%, 64.50%, 54.92%, and 77.54%, respectively, which will lay a foundation for the further purification of epimedin monomers and full utilization of Epimedium resources. Meanwhile, the osteogenic effects of epimedins A - C were investigated for the first time and compared with that of icariin, which will provide guidance for the clinical applications of Epimedium in the treatment of osteoporosis.

Biodegradation of PVA by the new mixed strains isolated from a de-sizing process.

The degradation characteristics of the new mixed strains isolated from a de-sizing process which could degrade PVA thoroughly were studied. The interrelation of seven kinds of single bacterium separated from mixed strains was studied through combination experiments. The degradation process was analysed through UV spectrum, IR, GPC and other methods. The enzymatic properties and enzymatic reaction dynamic processes were studied. The results showed that PVA with the initial average molecular weight of 51,260 Da could be degraded thoroughly by seven kinds of single bacterium because of their mutual coordination effect. In addition, some carboxylic acid and methyl ketone substances could be produced in the PVA degradation process by some bacteria (mainly A4 and C1). These middle smaller molecular weight materials would be further degraded thoroughly by other bacteria (mainly A1 and A3). The PVA-degrading enzyme that was produced by the mixed strains was mainly an exocellular enzyme. The enzyme reaction kinetics equation was v = 19.5[S]/(2.06 × 10(-3) + [S]).