A compound eye-like morphology formed through hexagonal array of hemispherical microparticles where an alkyl-fullerene derivative self-assembled at atmosphere-sealed air/water interface.

Self-assembly processes are widely used in nature to form hierarchically organized structures, prompting us to investigate such processes at the macroscopic scale. We report an unprecedented approach toward the self-assembly of alkyl-fullerene (C60) derivatives into a hexagonal array of hemispherical microparticles akin to the morphology of a compound eye. The method includes casting solvated alkyl-C60compound on an air/water interface followed by controlled evaporation of the solvent under atmosphere-sealed conditions. This leads to the formation of a thin film floating on water with a diameter of up to 1.3 centimeters and exhibiting a hexagonally-packed hemispherical structure with a diameter of approximately 38µm. Various measurements of the formed film reveal that amorphousness is necessary for suppressing uncontrollable crystallization, which affects the microparticle size and film formation mechanism. We tested the feasibility of this approach for the self-assembly of a relatively common C60derivative, [6,6]-phenyl-C61-butyric acid methyl ester (PC61BM), resulting in the formation of a film with a similar pattern of hexagonally-packed larger microparticles approximately 152µm in size of diameter.

Anionic Effect on Electrical Transport Properties of Solid Co2+/3+ Redox Mediators.

In a solid-state dye-sensitized solar cell, a fast-ion conducting (σ25°C > 10-4 S cm-1) solid redox mediator (SRM; electrolyte) helps in fast dye regeneration and back-electron transfer inhibition. In this work, we synthesized solid Co2+/3+ redox mediators using a [(1 - x)succinonitrile: x poly(ethylene oxide)] matrix, LiX, Co(tris-2,2'-bipyridine)3(bis(trifluoromethyl) sulfonylimide)2, and Co(tris-2,2'-bipyridine)3(bis(trifluoromethyl) sulfonylimide)3 via the solution-cast method, and the results were compared with those of their acetonitrile-based liquid counterparts. The notation x is a weight fraction (=0, 0.5, and 1), and X represents an anion. The anion was either bis(trifluoromethyl) sulfonylimide [TFSI-; ionic size, 0.79 nm] or trifluoromethanesulfonate [Triflate-; ionic size, 0.44 nm]. The delocalized electrons and a low value of lattice energy for the anions made the lithium salts highly dissociable in the matrix. The electrolytes exhibited σ25°C ≈ 2.1 × 10-3 (1.5 × 10-3), 7.2 × 10-4 (3.1 × 10-4), and 9.7 × 10-7 (6.3 × 10-7) S cm-1 for x = 0, 0.5, and 1, respectively, with X = TFSI- (Triflate-) ions. The log σ-T-1 plot portrayed a linear curve for x = 0 and 1, and a downward curve for x = 0.5. The electrical transport study showed σ(TFSI-) > σ(Triflate-), with lower activation energy for TFSI- ions. The anionic effect increased from x = 0 to 1. This effect was explained using conventional techniques, such as Fourier transform infrared spectroscopy (FT-IR), X-ray diffractometry (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), UV-visible spectroscopy (UV-vis), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA).

Functional outcome of total hip arthroplasty in tubercular hip arthritis: A prospective study.

Background: Total hip arthroplasty (THA) is a well-established procedure to cure tubercular hip arthritis in patients with healed tuberculosis while its role in active tuberculosis is still debatable. The aim of the study is to investigate the functional outcomes of THA in active tuberculosis with advanced hip arthritis. The reactivation of tuberculosis and complications postoperatively has also been assessed. Materials and methods: The current open-ended prospective cohort study was carried out at a tertiary center from 2018 to 2020. Twenty patients of active tubercular hip arthritis (8 females and 12 males) were taken with a follow-up period ranging from 1 year to 3 years, with a mean of 14 months.Biochemical investigations were done both preoperatively and postoperatively. Preoperative anti-tubercular therapy (ATT) regimen was administered, as per standard norms, to patients for a minimum period of 6 weeks, and postoperatively for 6 months-12 months. Postero-lateral and Hardinge approaches were employed in all cases. Clinical and radiological parameters were assessed and functional outcomes were evaluated using the Harris Hip score (HHS). Results: The mean age of patients was 37.6 ± 11.38 years. Biochemical parameters were also found to improve postoperatively (p < 0.0001). The mean flexion, extension, abduction, external and internal rotation were found to increase postoperatively (p < 0.001). The mean flexion deformity in the preoperative period was 12.35 ± 4.716, whereas none of the patients had flexion deformities post operatively. The mean shortening was 2.12 ± 0.60 and 1 ± 0 at preoperative and postoperative respectively. The Total hip arthroplasty implant was found stable in all patients. The mean Harris score increased subsequently throughout the follow-up interval and differences were statistically significant (p < 0.0001). None of the patients had reactivation of tuberculosis infection postoperatively. Conclusion: Total hip arthroplasty is a reliable option to treat active advanced tubercular hip arthritis and gives good functional outcome with proper preoperative and postoperative ATT regimen.

Electrical transport properties of [(1 - x)succinonitrile:xpoly(ethylene oxide)]-LiCF3SO3-Co[tris-(2,2'-bipyridine)]3(TFSI)2-Co[tris-(2,2'-bipyridine)]3(TFSI)3 solid redox mediators.

A solid redox mediator (solid electrolyte) with an electrical conductivity (σ25°C) greater than 10-4 S cm-1 is an essential requirement for a dye-sensitized solar cell in the harsh weather of Gulf countries. This paper reports the electrical properties of solid redox mediators prepared using highly dissociable ionic salts: Co[tris-(2,2'-bipyridine)]3(TFSI)2, Co[tris-(2,2'-bipyridine)]3(TFSI)3, and LiCF3SO3 as a source of Co2+, Co3+, and Li+ ions, respectively, in a solid matrix: [(1 - x)succinonitrile:xpoly(ethylene oxide)], where x = 0, 0.5, and 1 in weight fraction. In the presence of large size of cations (Co2+ and Co3+) and large-sized and weakly-coordinated anions (TFSI- and CF3SO3-), only the succinonitrile-poly(ethylene oxide) blend (x = 0.5) resulted in highly conductive amorphous regions with σ25°C of 4.7 × 10-4 S cm-1 for EO/Li+ = 108.4 and 3.1 × 10-4 S cm-1 for EO/Li+ = 216.8. These values are slightly lower than 1.5 × 10-3 S cm-1 for x = 0 and higher than 6.3 × 10-7 S cm-1 for x = 1. Only blend-based electrolytes exhibited a downward curve in the log σ-T-1 plot, a low value of pseudo-activation energy (0.06 eV), a high degree of transparency, and high thermal stability, making it useful for device applications.

Defining neutralization and allostery by antibodies against COVID-19 variants.

The changing landscape of SARS-CoV-2 Spike protein is linked to the emergence of variants, immune-escape and reduced efficacy of the existing repertoire of anti-viral antibodies. The functional activity of neutralizing antibodies is linked to their quaternary changes occurring as a result of antibody-Spike trimer interactions. Here, we reveal the conformational dynamics and allosteric perturbations linked to binding of novel human antibodies and the viral Spike protein. We identified epitope hotspots, and associated changes in Spike dynamics that distinguish weak, moderate and strong neutralizing antibodies. We show the impact of mutations in Wuhan-Hu-1, Delta, and Omicron variants on differences in the antibody-induced conformational changes in Spike and illustrate how these render certain antibodies ineffective. Antibodies with similar binding affinities may induce destabilizing or stabilizing allosteric effects on Spike, with implications for neutralization efficacy. Our results provide mechanistic insights into the functional modes and synergistic behavior of human antibodies against COVID-19 and may assist in designing effective antiviral strategies.

Highly Soluble Ambipolar anti-Perylene-3,4 : 9,10-bis(benzimidazole)s Stabilize a Room-Temperature Columnar Hexagonal Phase.

A new series of highly soluble perylene anti-bis(4,5-dialkoxybenzimidazole)s bearing branched flexible chains stabilizing room temperature columnar hexagonal phase and with balanced ambipolar charge carrier mobility is reported for the first time. Only the anti isomer was successfully separated and characterized. These compounds have a high extinction coefficient, small optical band gap and wide absorption range, thus making them a promising class of ambipolar organic semiconductors capable of self-organizing.

Studies on Polybenzimidazole and Methanesulfonate Protic-Ionic-Liquids-Based Composite Polymer Electrolyte Membranes.

In the present work, different methanesulfonate-based protic ionic liquids (PILs) were synthesized and their structural characterization was performed using FTIR, 1H, and 13C NMR spectroscopy. Their thermal behavior and stability were studied using DSC and TGA, respectively, and EIS was used to study the ionic conductivity of these PILs. The PIL, which was diethanolammonium-methanesulfonate-based due to its compatibility with polybenzimidazole (PBI) to form composite membranes, was used to prepare proton-conducting polymer electrolyte membranes (PEMs) for prospective high-temperature fuel cell application. The prepared PEMs were further characterized using FTIR, DSC, TGA, SEM, and EIS. The FTIR results indicated good interaction among the PEM components and the DSC results suggested good miscibility and a plasticizing effect of the incorporated PIL in the PBI polymer matrix. All the PEMs showed good thermal stability and good proton conductivity for prospective high-temperature fuel cell application.

Alkyl-C60 liquid electrets as deformable mechanoelectric generators.

Special attention is being paid to the potential applicability of various soft electronics in deformable/wearable devices. These devices must be constantly connected to energy sources to ensure their uninterrupted operation. Electrets, which are capable of retaining quasi-permanent electric charges inside or on the surface of materials, are expected to be a battery-less power source. Here, we present a strategy for harvesting the charges in alkyl-C60 liquids. Suitable substitution of bulky yet flexible branched long-alkyl chains generated C60-mono-adducts and regioisomeric bis-adducts as room-temperature solvent-free liquids. These alkyl-C60 liquids were negatively poled by the corona-discharging and soaked in nylon fabric. The liquid of the C60 bis-adduct exhibited better charge retention in comparison to the liquid of the C60 mono-adduct. This suggests that the bulky long-alkyl chains provided proper insulation for the C60 core and charge trapping in the liquid. This charge-trapping behaviour and the inherent fluidity of the alkyl-C60 liquids enabled their fabrication into deformable mechanoelectric generator (MEG) devices. The MEG exhibited applicability as a deformable micropower source or vibration sensor by generating output voltage pulses even under folded/twisted/rolled conditions. The alkylated-liquid-based MEGs worked at frequencies similar to human body motion, showing promising potential for body motion sensors and healthcare applications.

First example of ambipolar naphthalene diimide exhibiting a room temperature columnar phase.

A self-assembled ambipolar organic semiconductor based on naphthalene diimide with low clearing temperature, solution processability, and high molar extinction coefficient, exhibiting a room temperature columnar hexagonal liquid crystalline phase is reported.

Dyeing Non-Recyclable Polyethylene Plastic with Photoacid Phycocyanobilin from Spirulina Algae: Ultrafast Photoluminescence Studies.

Despite the enormous environmental damage caused by plastic waste, it makes up over one-third of globally produced plastics. Polyethylene (PE) wastes have low recycling but high production rates. Towards the construction of ionic solar cells from PE, the present work describes the loading of a bioactive photoacid phycocyanobilin (PCB) dye from the pigment of Spirulina blue-green algae (as a natural resource) on low-density polyethylene (LDPE) plastic film. Dyeing was confirmed by X-ray photoelectron spectroscopy (XPS). Upon excitation of the Soret-band (400 nm), the photoluminescence (PL) spectra of PCB in neat solvents revealed two prominent emission peaks at 450-550 and 600-700 nm. The first band assigned to bilirubin-like (PCBBR) species predominated the spectral profile in the highly rigid solvent glycerol and upon loading 0.45 % (w/w) of the dye on plastic. The photoluminescence excitation (PLE) spectra of PCB for the second region (Q-band) at 672 nm in the same solvents confirmed the ground state heterogenicity previously associated with the presence of PCBA (neutral), PCBB (cationic), and PCBC (anionic) conformers. Time-resolved photoluminescence (TRPL) measurements induced via excitation of all PCB species at 510 nm in methanol revealed three-lifetime components with τ1 = ~0.1 ns and τ2 = ~2 ns associated with PCBBR species and τ3 = ~5 ns pertinent to the long-living photoproduct X*. Decay-associated spectra (DAS) analysis of the photoluminescence transient spectra of the final dyed films in the solid-state confirmed the improved generation of the long-living photoproduct as manifested in a significant increase in the PL intensity (~100-fold) and lifetime value (~90 ns) in the Q-region upon loading 6.92 % (w/w) of the dye on plastic. The photoproduct species were presumably assigned to the deprotonated PCB species, suggesting improved ionic mobility. The potential implementation of the PCB-sensitized PE solid wastes for the fabrication of ionic solar cells is discussed.

Characterization of the enhanced infectivity and antibody evasion of Omicron BA.2.75.

Recently emerged SARS-CoV-2 Omicron subvariant, BA.2.75, displayed a growth advantage over circulating BA.2.38, BA.2.76, and BA.5 in India. However, the underlying mechanisms for enhanced infectivity, especially compared with BA.5, remain unclear. Here, we show that BA.2.75 exhibits substantially higher affinity for host receptor angiotensin-converting enzyme 2 (ACE2) than BA.5 and other variants. Structural analyses of BA.2.75 spike shows its decreased thermostability and increased frequency of the receptor binding domain (RBD) in the "up" conformation under acidic conditions, suggesting enhanced low-pH-endosomal cell entry. Relative to BA.4/BA.5, BA.2.75 exhibits reduced evasion of humoral immunity from BA.1/BA.2 breakthrough-infection convalescent plasma but greater evasion of Delta breakthrough-infection convalescent plasma. BA.5 breakthrough-infection plasma also exhibits weaker neutralization against BA.2.75 than BA.5, mainly due to BA.2.75's distinct neutralizing antibody (NAb) escape pattern. Antibody therapeutics Evusheld and Bebtelovimab remain effective against BA.2.75. These results suggest BA.2.75 may prevail after BA.4/BA.5, and its increased receptor-binding capability could support further immune-evasive mutations.

Structural, Thermal, and Electrical Properties of Poly(Ethylene Oxide)-Tetramethyl Succinonitrile Blend for Redox Mediators.

An all-solid−state dye-sensitized solar cell is one of the non-fossil fuel-based electrochemical devices for electricity generation in a high-temperature region. This device utilizes a redox mediator, which is a fast ion-conducting solid polymer electrolyte (SPE). The SPE makes the device economical, thinner, and safer in high-temperature regions. The SPE generally has a form of matrix−plasticizer−redox salts. Succinonitrile (SN) is generally employed as a plasticizer for reducing the crystallinity of poly(ethylene oxide), abbreviated as PEO, a common polymeric matrix. In the present paper, the structural and thermal properties of tetramethyl succinonitrile (TMSN) were compared with SN for its application as a solid plasticizer. TMSN and SN both are plastic crystals. TMSN has four methyl groups by replacing the hydrogen of the SN, resulting in higher molecular weight, solid−solid phase transition temperature, and melting temperature. We thoroughly studied the structural, thermal, and electrical properties of the [(1−x)PEO: xTMSN] blend for utilizing it as a matrix, where x = 0−0.25 in mole fraction. The FT-IR spectra and XRD patterns of the blends exhibited PEO-alike up to x = 0.15 mole and TMSN-alike for x > 0.15 mole. Differential scanning calorimetry revealed formation of a eutectic phase from x = 0.1 mole and phase separation from x = 0.15 mole. The blends with x = 0.1−0.15 mole had a low value of PEO crystallinity. Thermogravimetric analysis showed thermal stability of the blends up to 75 °C. The blends exhibited electrical conductivity, σ25°C more than 10−9 S cm−1, and Arrhenius behavior (activation energy, ~0.8 eV) in a temperature region, 25−50 °C.

Electrical Transport, Structural, Optical and Thermal Properties of [(1-x)Succinonitrile: xPEO]-LiTFSI-Co(bpy)3(TFSI)2-Co(bpy)3(TFSI)3 Solid Redox Mediators.

The solar cell has been considered one of the safest modes for electricity generation. In a dye-sensitized solar cell, a commonly used iodide/triiodide redox mediator inhibits back-electron transfer reactions, regenerates dyes, and reduces triiodide into iodide. The use of iodide/triiodide redox, however, imposes several problems and hence needs to be replaced by alternative redox. This paper reports the first Co2+/Co3+ solid redox mediators, prepared using [(1−x)succinonitrile: xPEO] as a matrix and LiTFSI, Co(bpy)3(TFSI)2, and Co(bpy)3(TFSI)3 as sources of ions. The electrolytes are referred to as SN_E (x = 0), Blend 1_E (x = 0.5 with the ethereal oxygen of the PEO-to-lithium ion molar ratio (EO/Li+) of 113), Blend 2_E (x = 0.5; EO/Li+ = 226), and PEO_E (x = 1; EO/Li+ = 226), which achieved electrical conductivity of 2.1 × 10−3, 4.3 × 10−4, 7.2 × 10−4, and 9.7 × 10−7 S cm−1, respectively at 25 °C. Only the blend-based polymer electrolytes exhibited the Vogel-Tamman-Fulcher-type behavior (vitreous nature) with a required low pseudo-activation energy (0.05 eV), thermal stability up to 125 °C, and transparency in UV-A, visible, and near-infrared regions. FT-IR spectroscopy demonstrated the interaction between salt and matrix in the following order: SN_E < Blend 2_E < Blend 1_E << PEO_E. The results were compared with those of acetonitrile-based liquid electrolyte, ACN_E.

Tetramethyl Succinonitrile as a Solid Plasticizer in a Poly(ethylene oxide)8 -LiI-I2 Solid Polymer Electrolyte.

Dye-sensitized solar cell (DSSC) is a promising alternative to the commercially available amorphous silicon-based solar cell because of several advantageous properties. A DSSC with a fast ion conducting solid polymer electrolyte is required for the arid atmosphere of Gulf countries. In this work, a new matrix, poly(ethylene oxide)-tetramethyl succinonitrile blend to synthesize a blend-LiI-I2 solid polymer electrolyte for the DSSC application has been proposed. The tetramethyl succinonitrile is a member of plastic crystal with a solid-solid phase transition temperature (Tpc ) of ≈71 °C and melting temperature (Tm ) of ≈170.5 °C. Its molar fraction, 0.1-0.15 is sufficient enough for synthesizing a polymer electrolyte with electrical conductivity of >10-4 S cm-1 at room temperature. This electrolyte shows Vogel-Tamman-Fulcher type behavior with a low value (≈0.083 eV) of pseudo-activation energy for easy ion transport. The results of Fourier-transform infrared spectroscopy, X-ray diffractometry, and differential scanning calorimetry studies reveal the plasticizing effect of tetramethyl succinonitrile to form an amorphous phase. This electrolyte results in a ≈661% gain in short-circuit current density and thereby a ≈552% gain in the cell efficiency (≈3.5%) with respect to the DSSC prepared with the tetramethyl succinonitrile-free electrolyte.

Samba II PCR testing for COVID-19 in pregnant women: a retrospective cohort study and literature review.

BACKGROUND: Asymptomatic carriage of COVID-19 in pregnant women has been reported and could lead to outbreaks in maternity units. We sought to ascertain the impact of rapid isothernal nucleic acid based testing for COVID-19 in an unselected cohort of pregnant women attending our maternity unit. We also assessed the correlation between community prevalence and asymptomatic carriage. METHODS: Data for the retrospective cohort study were collected from a large UK tertiary maternity unit over a 4-week period using computerised hospital records. Literature searches were performed across multiple repositories. COVID-19 prevalence was extracted from online repositories. RESULTS: Nasopharyngeal and oropharyngeal swabs were obtained from 457/465 (98%) women during the study period. The median turnaround time for results was 5.3 h (interquartile range (IQR) 2.6-8.9 h), with 92% of the results returned within 24 h. In our cohort, only one woman tested positive, giving a screen positive rate of 0.22% (1/457; 95% CI: 0.04-1.23%). One woman who tested negative developed a fever postnatally following discharge but was lost to follow-up. From our literature review, we did not find any correlation between asymptomatic carriage in pregnant women and the reported regional prevalence of COVID-19. CONCLUSIONS: Testing using the SAMBA-II machine was acceptable to the vast majority of pregnant women requiring admission and had a low turnaround time. Asymptomatic carriage is low, but not correlated to community prevalence rates. Screening pregnant women on admission will remain an important component in order to minimise nosocomial infection.

Understanding the Electrical Transport-Structure Relationship and Photovoltaic Properties of a [Succinonitrile-Ionic Liquid]-LiI-I2 Redox Electrolyte.

The properties of succinonitrile-based electrolytes can be enhanced by the addition of an ionic liquid (IL). Here, we have reported the relationship between the electrical transport properties and the structure of a new [(1 - x)succinonitrile:xIL]-LiI-I2 electrolyte, where the mole fraction (x) of the IL (1-butyl-3-methyl imidazolium iodide) was varied from 0 to 40%. Compositional variation revealed the optimum conducting electrolyte (OCE) at x = 10 mol %, possessing an electrical conductivity (σ25°C) of ∼7.5 mS cm-1 with an enhancement of ∼369%. The partial replacement of succinonitrile by the IL eliminated the abrupt change in the slope of the log σ vs T -1 plot at the melting temperature of the succinonitrile-LiI-I2 system, showing the Vogel-Tamman-Fulcher-type behavior owing to molecular chain disorder. Raman spectroscopy showed the I3 - concentration nearly twice the I5 - concentration for the OCE. Vibrational spectroscopy exhibited red shifts in the νC≡N, νCH2 , νa,CC, νa,N-CH3 , and νs,N-butyl modes, indicating an interaction between succinonitrile and the IL. The area ratio A CH2 /A C≡N increased slightly for x = 10 mol % (OCE) and largely for x > 10 mol %, indicating an increase in the C-H bond length. These observations indicated that the interaction between succinonitrile and the IL was enhanced at x > 10 mol %, which decreased the electrical conductivity of these electrolytes. Owing to fast ion transport, an OCE-based dye-sensitized solar cell showed a 40-55% decrease in the charge-transfer and Warburg resistances, resulting in ∼139 and ∼122% increases in J SC and η, respectively.

Evidence for HIV-1 cure after CCR5Δ32/Δ32 allogeneic haemopoietic stem-cell transplantation 30 months post analytical treatment interruption: a case report.

BACKGROUND: The London patient (participant 36 in the IciStem cohort) underwent allogeneic stem-cell transplantation with cells that did not express CCR5 (CCR5Δ32/Δ32); remission was reported at 18 months after analytical treatment interruption (ATI). Here, we present longer term data for this patient (up to 30 months after ATI), including sampling from diverse HIV-1 reservoir sites. METHODS: We used ultrasensitive viral load assays of plasma, semen, and cerebrospinal fluid (CSF) samples to detect HIV-1 RNA. In gut biopsy samples and lymph-node tissue, cell-copy number and total HIV-1 DNA levels were quantified in multiple replicates, using droplet digital PCR (ddPCR) and quantitative real-time PCR. We also analysed the presence of intact proviral DNA using multiplex ddPCR targeting the packaging signal (ψ) and envelope (env). We did intracellular cytokine staining to measure HIV-1-specific T-cell responses. We used low-sensitive and low-avidity antibody assays to measure the humoral response to HIV-1. We predicted the probability of rebound using a mathematical model and inference approach. FINDINGS: HIV-1 viral load in plasma remained undetectable in the London patient up to 30 months (last tested on March 4, 2020), using an assay with a detection limit of 1 copy per mL. The patient's CD4 count was 430 cells per µL (23·5% of total T cells) at 28 months. A very low-level positive signal for HIV-1 DNA was recorded in peripheral CD4 memory cells at 28 months. The viral load in semen was undetectable in both plasma (lower limit of detection [LLD] <12 copies per mL) and cells (LLD 10 copies per 106 cells) at 21 months. CSF was within normal parameters at 25 months, with HIV-1 RNA below the detection limit (LLD 1 copy per mL). HIV-1 DNA by ddPCR was negative in rectum, caecum, and sigmoid colon and terminal ileum tissue samples at 22 months. Lymph-node tissue from axilla was positive for the long-terminal repeat (33 copies per 106 cells) and env (26·1 copies per 106 cells), negative for ψ and integrase, and negative by the intact proviral DNA assay, at 27 months. HIV-1-specific CD4 and CD8 T-cell responses have remained absent at 27 months. Low-avidity Env antibodies have continued to decline. Mathematical modelling suggests that the probability of remission for life (cure) is 98% in the context of 80% donor chimerism in total HIV target cells and greater than 99% probability of remission for life with 90% donor chimerism. INTERPRETATION: The London patient has been in HIV-1 remission for 30 months with no detectable replication-competent virus in blood, CSF, intestinal tissue, or lymphoid tissue. Donor chimerism has been maintained at 99% in peripheral T cells. We propose that these findings represent HIV-1 cure. FUNDING: Wellcome Trust and amfAR (American Foundation for AIDS Research).

Perylene-Based Liquid Crystals as Materials for Organic Electronics Applications.

Columnar phases formed by the stacking of disclike molecules with an intimate π-π overlap forms a 1D pathway for the anisotropic charge migration along the columns. Columnar phases have great potential in organic electronic devices to be utilized as active semiconducting layers in comparison to organic single crystals or amorphous polymers in terms of processability, ease of handling, and high charge carrier mobility. Intelligent molecular engineering of perylene and its derivatives provided access to tune the physical properties and self-assembly behavior. The columnar phase formed by perylene derivatives has great potential in the fabrication of organic electronic devices. There are several positions on the perylene molecule, which can be functionalized to tune its self-assembly, as well as optoelectronic properties. Thus, many liquid-crystalline molecules stabilizing the columnar phase, which are based on perylene tetraesters, perylene diester imides, and perylene bisimides, have been synthesized over the years. Their longitudinal and laterally extended derivatives, bay-substituted derivatives exhibiting a columnar phase, are reported. In addition, several liquid-crystalline oligomers and polymers based on perylene derivatives were also reported. All such modifications provide an option to tune the energy levels of frontier molecular orbitals with respect to the work function of the electrodes in devices and also the processability of such materials. In this feature article, we attempt to provide an overview of the molecular design developed to tune the applicable properties and self-assembly of perylene derivatives as well as recent developments related to their application in the fabrication of organic solar cells, organic light-emitting diodes, and organic field-effect transistors.

Microwave-Assisted Method for the Synthesis of Perylene Ester Imides as a Gateway Toward Unsymmetrical Perylene Bisimides.

A high yielding microwave-assisted synthetic method to obtain unsymmetrical perylene diester monoimide (PEI) by treating the perylene tetrester (PTE) with a requisite amine is reported. Perylene-based molecules are widely used in the construction of self-assembled supramolecular structures because of their propensity to aggregate under various conditions. In comparison to perylene bisimides (PBIs), PEIs are less studied in organic electronics/self-assembly due to the synthetic difficulty and low yields in their preparation. PEIs are less electron deficient and have an unsymmetric structure in comparison to PBIs. Further, the PEIs have a higher solubility than PBIs. The present method is applicable with a wide range of substrates like aliphatic, aromatic, benzyl amines, PTEs, and bay-annulated PTEs. This method provides a tuning handle for the optical/electronic properties of perylene derivatives and also provides an easy access to unsymmetrical PBIs from the PEIs.