Semiconducting Polymer Dots Directly Stabilized with Serum Albumin: Preparation, Characterization, and Cellular Immunolabeling.

Semiconducting polymer dots (Pdots) are brightly fluorescent nanoparticles of growing interest for bioanalysis and imaging. A recurring challenge with these materials is obtaining robust physical and colloidal stability and low nonspecific binding. Here, we prepared and characterized Pdots with bovine serum albumin (BSA) as the stabilizing agent (BSA-Pdots) instead of a more conventionally used amphiphilic polymer, both without and with cross-linking of the protein using glutaraldehyde (BSA(GA)-Pdots) or disuccinimidyl glutarate. Characterization included fluorescence properties; colloidal stability as a function of pH, ionic strength, and solvent perturbation; shape retention and hardness; and nonspecific binding with common assay substrates, fixed cells, and live cells. These properties were contrasted with the same properties for amphiphilic polymer-stabilized Pdots and silica-coated Pdots. On balance, the BSA-stabilized Pdots were similar or more favorable in their properties, with BSA(GA)-Pdots being especially advantageous. Bioconjugation of the BSA-stabilized Pdots was possible using amine-reactive active-ester chemistry, including biotinylation and bioorthogonal functionalization for immunoconjugation via tetrazine-strained-alkene click chemistry. These approaches were used for selective fluorescent labeling of cells based on ligand-receptor and antibody-antigen binding, respectively. Overall, direct BSA stabilization is a very promising strategy for preparing Pdots with improved physical and colloidal stability, reduced nonspecific interactions, and utility for in vitro diagnostics and other bioanalyses and imaging.

Polymer Dots with Enhanced Photostability, Quantum Yield, and Two-Photon Cross-Section using Structurally Constrained Deep-Blue Fluorophores.

Semiconducting polymer dots (Pdots) have emerged as versatile probes for bioanalysis and imaging at the single-particle level. Despite their utility in multiplexed analysis, deep blue Pdots remain rare due to their need for high-energy excitation and sensitivity to photobleaching. Here, we describe the design of deep blue fluorophores using structural constraints to improve resistance to photobleaching, two-photon absorption cross sections, and fluorescence quantum yields using the hexamethylazatriangulene motif. Scanning tunneling microscopy was used to characterize the electronic structure of these chromophores on the atomic scale as well as their intrinsic stability. The most promising fluorophore was functionalized with a polymerizable acrylate handle and used to give deep-blue fluorescent acrylic polymers with Mn > 18 kDa and D < 1.2. Nanoprecipitation with amphiphilic polystyrene-graft-(carboxylate-terminated poly(ethylene glycol)) gave water-soluble Pdots with blue fluorescence, quantum yields of 0.81, and molar absorption coefficients of (4 ± 2) × 108 M-1 cm-1. This high brightness facilitated single-particle visualization with dramatically improved signal-to-noise ratio and photobleaching resistance versus an unencapsulated dye. The Pdots were then conjugated with antibodies for immunolabeling of SK-BR3 human breast cancer cells, which were imaged using deep blue fluorescence in both one- and two-photon excitation modes.

Photoluminescent Nanoparticles for Chemical and Biological Analysis and Imaging.

Research related to the development and application of luminescent nanoparticles (LNPs) for chemical and biological analysis and imaging is flourishing. Novel materials and new applications continue to be reported after two decades of research. This review provides a comprehensive and heuristic overview of this field. It is targeted to both newcomers and experts who are interested in a critical assessment of LNP materials, their properties, strengths and weaknesses, and prospective applications. Numerous LNP materials are cataloged by fundamental descriptions of their chemical identities and physical morphology, quantitative photoluminescence (PL) properties, PL mechanisms, and surface chemistry. These materials include various semiconductor quantum dots, carbon nanotubes, graphene derivatives, carbon dots, nanodiamonds, luminescent metal nanoclusters, lanthanide-doped upconversion nanoparticles and downshifting nanoparticles, triplet-triplet annihilation nanoparticles, persistent-luminescence nanoparticles, conjugated polymer nanoparticles and semiconducting polymer dots, multi-nanoparticle assemblies, and doped and labeled nanoparticles, including but not limited to those based on polymers and silica. As an exercise in the critical assessment of LNP properties, these materials are ranked by several application-related functional criteria. Additional sections highlight recent examples of advances in chemical and biological analysis, point-of-care diagnostics, and cellular, tissue, and in vivo imaging and theranostics. These examples are drawn from the recent literature and organized by both LNP material and the particular properties that are leveraged to an advantage. Finally, a perspective on what comes next for the field is offered.

Near-Infrared-Emitting Boron-Difluoride-Curcuminoid-Based Polymers Exhibiting Thermally Activated Delayed Fluorescence as Biological Imaging Probes.

Near-infrared-emitting polymers were prepared using four boron-difluoride-curcuminoid-based monomers using ring-opening metathesis polymerization (ROMP). Well-defined polymers with molecular weights of ≈20 kDa and dispersities <1.07 were produced and exhibited near-infrared (NIR) emission in solution and in the solid state with photoluminescence quantum yields (ΦPL ) as high as 0.72 and 0.18, respectively. Time-resolved emission spectroscopy revealed thermally activated delayed fluorescence (TADF) in polymers containing highly planar dopants, whereas room-temperature phosphorescence dominated with twisted species. Density functional theory demonstrated that rotation about the donor-acceptor linker can give rise to TADF, even where none would be expected based on calculations using ground-state geometries. Incorporation of TADF-active materials into water-soluble polymer dots (Pdots) gave NIR-emissive nanoparticles, and conjugation of these Pdots with antibodies enabled immunofluorescent labeling of SK-BR3 human breast-cancer cells.

Fully Self-Assembled Silica Nanoparticle-Semiconductor Quantum Dot Supra-Nanoparticles and Immunoconjugates for Enhanced Cellular Imaging by Microscopy and Smartphone Camera.

There is a growing need for brighter luminescent materials to improve the detection and imaging of biomarkers. Relevant contexts include low-abundance biomarkers and technology-limited applications, where an example of the latter is the emerging use of smartphones and other nonoptimal but low-cost and portable devices for point-of-care diagnostics. One approach to achieving brighter luminescent materials is incorporating multiple copies of a luminescent material into a larger supra-nanoparticle (supra-NP) assembly. Here, we present a facile method for the preparation and immunoconjugation of supra-NP assemblies (SiO2@QDs) that comprised many quantum dots (QDs) around a central silica nanoparticle (SiO2 NP). The assembly was entirely driven by spontaneous affinity interactions between the constituent materials, which included imidazoline-functionalized silica nanoparticles, ligand-coated QDs, imidazole-functionalized dextran, and tetrameric antibody complexes (TACs). The physical and optical properties of the SiO2@QDs were characterized at both the ensemble and single-particle levels. Notably, the optical properties of the QDs were preserved upon assembly into supra-NPs, and single SiO2@QDs were approximately an order of magnitude brighter than single QDs and nonblinking. In proof-of-concept applications, including selective immunolabeling of breast cancer cells, the SiO2@QDs provided higher sensitivity and superior signal-to-background ratios whether using research-grade fluorescence microscopy or smartphone-based imaging. Overall, the SiO2@QDs are promising materials for enhanced bioanalysis and imaging.

Comparison of Semiconducting Polymer Dots and Semiconductor Quantum Dots for Smartphone-Based Fluorescence Assays.

Fluorescent nanoparticles have transformative potential for smartphone-based point-of-need diagnostics because an optimal material can reduce the technical burden to meet assay performance requirements. Semiconductor quantum dots (QDs) are a now well-established example of such a material. Semiconducting polymer dots (Pdots) and conjugated-polymer nanoparticles (CPNs) are emerging materials that bring the advantages of being bright, easy to synthesize, and metal-free when compared with QDs, but they frequently present the trade-off of spectrally broad emission and less well-defined surface chemistry. Here, we compare these two classes of nanoparticles in the context of a "bare bones" device that uses a smartphone for all-in-one excitation and imaging of fluorescence. The greater per-particle brightness of Pdots provides orders of magnitude better imaging sensitivity versus QDs, and this advantage translates to a model lateral flow assay. Our data suggest that Pdots will support multicolor imaging on a smartphone in an optimized assay, although QDs are likely superior for this purpose. These pros and cons lead to discussion of how physicochemical differences between QDs and Pdots may influence assay performance beyond differences in optical properties. Overall, Pdots have great potential for enabling smartphone-based fluorescence assays with high sensitivity and low detection limits.