Paternal imprinting of dosage-effect defective1 contributes to seed weight xenia in maize.

Historically, xenia effects were hypothesized to be unique genetic contributions of pollen to seed phenotype, but most examples represent standard complementation of Mendelian traits. We identified the imprinted dosage-effect defective1 (ded1) locus in maize (Zea mays) as a paternal regulator of seed size and development. Hypomorphic alleles show a 5-10% seed weight reduction when ded1 is transmitted through the male, while homozygous mutants are defective with a 70-90% seed weight reduction. Ded1 encodes an R2R3-MYB transcription factor expressed specifically during early endosperm development with paternal allele bias. DED1 directly activates early endosperm genes and endosperm adjacent to scutellum cell layer genes, while directly repressing late grain-fill genes. These results demonstrate xenia as originally defined: Imprinting of Ded1 causes the paternal allele to set the pace of endosperm development thereby influencing grain set and size.

Protein, weight, and oil prediction by single-seed near-infrared spectroscopy for selection of seed quality and yield traits in pea (Pisum sativum).

BACKGROUND: Pea (Pisum sativum) is a prevalent cool-season crop that produces seeds valued for their high protein content. Modern cultivars have incorporated several traits that improved harvested yield. However, progress toward improving seed quality has received less emphasis, in part due to the lack of tools for easily and rapidly measuring seed traits. In this study we evaluated the accuracy of single-seed near-infrared spectroscopy (NIRS) for measuring pea-seed weight, protein, and oil content. A total of 96 diverse pea accessions were analyzed using both single-seed NIRS and wet chemistry methods. To demonstrate field relevance, the single-seed NIRS protein prediction model was used to determine the impact of seed treatments and foliar fungicides on the protein content of harvested dry peas in a field trial. RESULTS: External validation of partial least squares (PLS) regression models showed high prediction accuracy for protein and weight (R2 = 0.94 for both) and less accuracy for oil (R2 = 0.74). Single-seed weight was weakly correlated with protein and oil content in contrast with previous reports. In the field study, the single-seed NIRS predicted protein values were within 10 mg g-1 of an independent analytical reference measurement and were sufficiently precise to detect small treatment effects. CONCLUSION: The high accuracy of protein and weight estimation show that single-seed NIRS could be used in the dual selection of high-protein, high-weight peas early in the breeding cycle, allowing for faster genetic advancement toward improved pea nutritional quality. © 2020 Society of Chemical Industry.

Modulation of early maize seedling performance via priming under sub-optimal temperatures.

Seeds planted in early spring frequently experience low temperature stress in the soil during germination and early plant growth. Seed pretreatments such as priming have been shown to ameliorate the negative effects of cold soil in some crops. However, the potential beneficial effects of priming have not been widely investigated for Zea mays (maize). To investigate seed priming effects, 24 diverse maize inbred lines were primed using a synthetic solid matrix, Micro-Cel E, and then exposed to 10°C soil conditions. Six DSLR cameras captured time lapsed images of emerging seedlings. Manual scoring was used to determine treatment effects on three seedling emergence metrics. Chilling substantially reduced total emergence for two of 24 genotypes evaluated. For these genotypes, priming provided protection allowing nearly full emergence. Priming significantly reduced mean emergence time and increased the emergence uniformity of chilling sensitive genotypes. The results suggest that the cold sensitive genotypes may benefit from priming pretreatment. Kernel density, weight, oil, protein, and starch traits, as determined by single-kernel near infrared spectroscopy, were not correlated with seedling emergence traits supporting a conclusion that early seedling performance cannot be determined from these maize kernel characteristics.

Ovary abortion is prevalent in diverse maize inbred lines and is under genetic control.

Crop improvement programs focus on characteristics that are important for plant productivity. Typically genes underlying these traits are identified and stacked to create improved cultivars. Hence, identification of valuable traits for plant productivity is critical for plant improvement. Here we describe an important characteristic for maize productivity. Despite the fact mature maize ears are typically covered with kernels, we find that only a fraction of ovaries give rise to mature kernels. Non-developed ovaries degenerate while neighboring fertilized ovaries produce kernels that fill the ear. Abortion occurs throughout the ear, not just at the tip. We show that the fraction of aborted ovaries/kernels is genetically controlled and varies widely among maize lines, and low abortion genotypes are rare. Reducing or eliminating ovary abortion could substantially increase yield, making this characteristic a new target for selection in maize improvement programs.

Quantitative trait loci associated with soybean seed weight and composition under different phosphorus levels.

Seed size and composition are important traits in food crops and can be affected by nutrient availability in the soil. Phosphorus (P) is a non-renewable, essential macronutrient, and P deficiency limits soybean (Glycine max) yield and quality. To investigate the associations of seed traits in low- and high-P environments, soybean recombinant inbred lines (RILs) from a cross of cultivars Fiskeby III and Mandarin (Ottawa) were grown under contrasting P availability environments. Traits including individual seed weight, seed number, and intact mature pod weight were significantly affected by soil P levels and showed transgressive segregation among the RILs. Surprisingly, P treatments did not affect seed composition or weight, suggesting that soybean maintains sufficient P in seeds even in low-P soil. Quantitative trait loci (QTLs) were detected for seed weight, intact pods, seed volume, and seed protein, with five significant QTLs identified in low-P environments and one significant QTL found in the optimal-P environment. Broad-sense heritability estimates were 0.78 (individual seed weight), 0.90 (seed protein), 0.34 (seed oil), and 0.98 (seed number). The QTLs identified under low P point to genetic regions that may be useful to improve soybean performance under limiting P conditions.

Enhanced Single Seed Trait Predictions in Soybean (Glycine max) and Robust Calibration Model Transfer with Near-Infrared Reflectance Spectroscopy.

Single seed near-infrared reflectance (NIR) spectroscopy predicts soybean (Glycine max) seed quality traits of moisture, oil, and protein. We tested the accuracy of transferring calibrations between different single seed NIR analyzers of the same design by collecting NIR spectra and analytical trait data for globally diverse soybean germplasm. X-ray microcomputed tomography (µCT) was used to collect seed density and shape traits to enhance the number of soybean traits that can be predicted from single seed NIR. Partial least-squares (PLS) regression gave accurate predictive models for oil, weight, volume, protein, and maximal cross-sectional area of the seed. PLS models for width, length, and density were not predictive. Although principal component analysis (PCA) of the NIR spectra showed that black seed coat color had significant signal, excluding black seeds from the calibrations did not impact model accuracies. Calibrations for oil and protein developed in this study as well as earlier calibrations for a separate NIR analyzer of the same design were used to test the ability to transfer PLS regressions between platforms. PLS models built from data collected on one NIR analyzer had minimal differences in accuracy when applied to spectra collected from a sister device. Model transfer was more robust when spectra were trimmed from 910 to 1679 nm to 955-1635 nm due to divergence of edge wavelengths between the two devices. The ability to transfer calibrations between similar single seed NIR spectrometers facilitates broader adoption of this high-throughput, nondestructive, seed phenotyping technology.

Efficient molecular marker design using the MaizeGDB Mo17 SNPs and Indels track.

Positional cloning in maize (Zea mays) requires development of markers in the region of interest. We found that primers designed to amplify annotated insertion-deletion polymorphisms of seven base pairs or greater between B73 and Mo17 produce polymorphic markers at a 97% frequency with 49% of the products showing co-dominant fragment length polymorphisms. When the same polymorphisms are used to develop markers for B73 and W22 or Mo17 and W22 mapping populations, 22% and 31% of markers are co-dominant, respectively. There are 38,223 Indel polymorphisms that can be converted to markers providing high-density coverage throughout the maize genome. This strategy significantly increases the efficiency of marker development for fine-mapping in maize.

Analysis of maize ( Zea mays ) kernel density and volume using microcomputed tomography and single-kernel near-infrared spectroscopy.

Maize kernel density affects milling quality of the grain. Kernel density of bulk samples can be predicted by near-infrared reflectance (NIR) spectroscopy, but no accurate method to measure individual kernel density has been reported. This study demonstrates that individual kernel density and volume are accurately measured using X-ray microcomputed tomography (µCT). Kernel density was significantly correlated with kernel volume, air space within the kernel, and protein content. Embryo density and volume did not influence overall kernel density. Partial least-squares (PLS) regression of µCT traits with single-kernel NIR spectra gave stable predictive models for kernel density (R(2) = 0.78, SEP = 0.034 g/cm(3)) and volume (R(2) = 0.86, SEP = 2.88 cm(3)). Density and volume predictions were accurate for data collected over 10 months based on kernel weights calculated from predicted density and volume (R(2) = 0.83, SEP = 24.78 mg). Kernel density was significantly correlated with bulk test weight (r = 0.80), suggesting that selection of dense kernels can translate to improved agronomic performance.

Structure and evolution of the plant cation diffusion facilitator family of ion transporters.

BACKGROUND: Members of the cation diffusion facilitator (CDF) family are integral membrane divalent cation transporters that transport metal ions out of the cytoplasm either into the extracellular space or into internal compartments such as the vacuole. The spectrum of cations known to be transported by proteins of the CDF family include Zn, Fe, Co, Cd, and Mn. Members of this family have been identified in prokaryotes, eukaryotes, and archaea, and in sequenced plant genomes. CDF families range in size from nine members in Selaginella moellendorffii to 19 members in Populus trichocarpa. Phylogenetic analysis suggests that the CDF family has expanded within plants, but a definitive plant CDF family phylogeny has not been constructed. RESULTS: Representative CDF members were annotated from diverse genomes across the Viridiplantae and Rhodophyta lineages and used to identify phylogenetic relationships within the CDF family. Bayesian phylogenetic analysis of CDF amino acid sequence data supports organizing land plant CDF family sequences into 7 groups. The origin of the 7 groups predates the emergence of land plants. Among these, 5 of the 7 groups are likely to have originated at the base of the tree of life, and 2 of 7 groups appear to be derived from a duplication event prior to or coincident with land plant evolution. Within land plants, local expansion continues within select groups, while several groups are strictly maintained as one gene copy per genome. CONCLUSIONS: Defining the CDF gene family phylogeny contributes to our understanding of this family in several ways. First, when embarking upon functional studies of the members, defining primary groups improves the predictive power of functional assignment of orthologous/paralogous genes and aids in hypothesis generation. Second, defining groups will allow a group-specific sequence motif to be generated that will help define future CDF family sequences and aid in functional motif identification, which currently is lacking for this family in plants. Third, the plant-specific expansion resulting in Groups 8 and 9 evolved coincident to the early primary radiation of plants onto land, suggesting these families may have been important for early land colonization.

Reciprocal grafting separates the roles of the root and shoot in zinc hyperaccumulation in Thlaspi caerulescens.

* The extreme phenotype of zinc (Zn) hyperaccumulation, which is found in several Brassicaceae species, is determined by mechanisms that promote elevated Zn tolerance and high Zn accumulation in shoots. * We used reciprocal grafting between a Zn hyperaccumulator, Thlaspi caerulescens, and a Zn nonaccumulator, Thlaspi perfoliatum, to determine the relative importance of roots and shoots in Zn hyperaccumulation and hypertolerance. * Leaves from plants with a T. perfoliatum rootstock and a T. caerulescens shoot scion did not hyperaccumulate Zn, whereas plants with a T. caerulescens rootstock and a T. perfoliatum shoot scion did hyperaccumulate Zn. However, although leaves from plants with a T. caerulescens rootstock and a T. perfoliatum shoot scion hyperaccumulated Zn, at high Zn loads these leaves showed significant symptoms of Zn toxicity, unlike leaves of self grafted T. caerulescens. * Hyperaccumulation of Zn in leaves of the hyperaccumulator T. caerulescens is pri-marily dictated by root processes. Further, the mechanisms controlling Zn hypertolerance in the hyperaccumulator T. caerulescens are driven primarily by shoot processes.

MTP1-dependent Zn sequestration into shoot vacuoles suggests dual roles in Zn tolerance and accumulation in Zn-hyperaccumulating plants.

The integral membrane protein Thlaspi goesingense metal tolerance protein 1 (TgMTP1) has been suggested to play an important role in Zn hyperaccumulation in T. goesingense. Here, we show that the TgMTP1 protein is accumulated to high levels at the vacuolar membrane in shoot tissue of T. goesingense. TgMTP1 is likely to act in the transport of Zn into the vacuole, enhancing both Zn accumulation and tolerance. By specifically expressing TgMTP1 in Arabidopsis thaliana shoots, we show that TgMTP1, localized at the vacuolar membrane, can drive the enhanced shoot accumulation of Zn by initiating a systemic Zn deficiency response. The systematic response includes increased expression of Zn transporters (ZIP3, ZIP4, ZIP5 and ZIP9) in both shoot and root tissue. Furthermore, shoot-specific accumulation of TgMTP1 at the vacuolar membrane also leads to increased resistance to Zn in A. thaliana, probably through enhanced Zn compartmentalization in the vacuole. Such evidence leads to the conclusion that the high levels of TgMTP1 at the vacuolar membrane in shoot tissue of the Zn hyperaccumulator T. goesingense play a role in both Zn tolerance and enhanced Zn uptake and accumulation, via the activation of a systemic Zn deficiency response.

The plant CDF family member TgMTP1 from the Ni/Zn hyperaccumulator Thlaspi goesingense acts to enhance efflux of Zn at the plasma membrane when expressed in Saccharomyces cerevisiae.

To avoid metal toxicity, organisms have evolved mechanisms including efflux of metal ions from cells and sequestration into internal cellular compartments. Members of the ubiquitous cation diffusion facilitator (CDF) family are known to play an important role in these processes. Overexpression of the plant CDF family member metal tolerance protein 1 (MTP1) from the Ni/Zn hyperaccumulator Thlaspi goesingense (TgMTP1), in the Saccharomyces cerevisiaeDelta zinc resistance conferring (zrc)1Delta cobalt transporter (cot)1 double mutant, suppressed the Zn sensitivity of this strain. T. goesingense was found to contain several allelic variants of TgMTP1, all of which confer similar resistance to Zn in Deltazrc1Deltacot1. Similarly, MTP1 from various hyperaccumulator and non-accumulator species also confer similar resistance to Zn. Deltazrc1Deltacot1 lacks the ability to accumulate Zn in the vacuole and has lower accumulation of Zn after either long- or short-term Zn exposure. Expression of TgMTP1 in Deltazrc1Deltacot1 leads to further lowering of Zn accumulation and an increase in Zn efflux from the cells. Expression of TgMTP1 in a V-type ATPase-deficient S. cerevisiae strain also confers increased Zn resistance. In vivo and in vitro immunological staining of hemagglutinin (HA)-tagged TgMTP1::HA reveals the protein to be localized in both the S. cerevisiae vacuolar and plasma membranes. Taken together, these data are consistent with MTP1 functioning to enhance plasma membrane Zn efflux, acting to confer Zn resistance independent of the vacuole in S. cerevisiae. Transient expression in Arabidopsis thaliana protoplasts also reveals that TgMTP1::green fluorescent protein (GFP) is localized at the plasma membrane, suggesting that TgMTP1 may also enhance Zn efflux in plants.