RESUMEN
This current study investigated the removal of metronidazole from aqueous media by C. vulgaris. Two different initial sizes of inoculum (0.05 and 0.5â¯gâ¯L-1) were tested for a wide concentration range of metronidazole (1-50⯵M). The effect of metronidazole concentrations on biomass production was studied for 20 days. The exopolymeric substances (EPS) were quantified and correlated with the removal of antibiotics from aqueous media. Specifically, MDZ stimulated the production of EPS in C. vulgaris, which played the major role in the adsorption of this antibiotic. Also, metronidazole significantly influenced the zeta potential of C. vulgaris in the test cultures, indicating a change in surface characteristics. This decrease in surface negative charge caused auto-flocculation phenomena at a stationary phase. Chronic and acute toxicity experiments showed that metronidazole was harmful to C. vulgaris at stationary phase. Results from this study would advance our knowledge on the treatment of metronidazole-contaminated waters with C. vulgaris as a green technology-oriented process.
Asunto(s)
Chlorella vulgaris/metabolismo , Metronidazol/análisis , Microalgas/metabolismo , Contaminantes Químicos del Agua/análisis , Purificación del Agua/métodos , Biomasa , Chlorella vulgaris/efectos de los fármacos , Chlorella vulgaris/crecimiento & desarrollo , Relación Dosis-Respuesta a Droga , Metronidazol/metabolismo , Metronidazol/toxicidad , Microalgas/crecimiento & desarrollo , Modelos Teóricos , Propiedades de Superficie , Pruebas de Toxicidad , Contaminantes Químicos del Agua/metabolismo , Contaminantes Químicos del Agua/toxicidadRESUMEN
In this work, ceramic ultrafiltration membranes deposited with different metal oxides (i.e., TiO2, Fe2O3, MnO2, CuO, and CeO2) of around 10 nm in thickness and similar roughness were tested for O/W emulsion treatment. A distinct membrane fouling tendency was observed, which closely correlated to the properties of the filtration-layer metal oxides (i.e., surface hydroxyl groups, hydrophilicity, surface charge, and adhesion energy for oil droplets). Consistent with the distinct bond strength of the surface hydroxyl groups, hydrophilicity of these common metal oxides is quite different. The differences in hydrophilicity consequently lead to different adhesion of these metal oxides toward oil droplets, consistent with the irreversible membrane fouling tendency. In addition, the surface charge of the metal oxide opposite to that of emulsion can help to alleviate irreversible membrane fouling in ultrafiltration. Highly hydrophilic Fe2O3 with the lowest fouling tendency could be a potential filtration-layer material for the fabrication/modification of ceramic membranes for O/W emulsion treatment. To the best of our knowledge, this is the first study clearly showing the correlations between surface properties of filtration-layer metal oxides and ceramic membrane fouling tendency by O/W emulsion.
Asunto(s)
Compuestos Férricos , Ultrafiltración , Cerámica/química , Membranas Artificiales , Metales , Óxidos , Propiedades de Superficie , Purificación del AguaRESUMEN
Photosensitizing properties of different dissolved organic matter (DOM) were investigated according to their performance in singlet oxygen ((1)O2), triplet state of DOM ((3)DOM*), and hydroxyl radical (·OH) productions. The photobleaching of DOM solutions after irradiation was characterized by fluorescence excitation-emission matrix and UV-Vis spectroscopy. The photosensitizing properties of pre-irradiated DOM solutions were changed in a sunlight simulator. The performance of DOMs in photosensitized degradation of several contaminants was investigated. For a 20 h exposure, the observed degradation rate constant (kobs) of some contaminants decreased as a function of exposure time, and highly depended on the properties of both DOM and contaminant. Degradation of contaminants with lower kobs was more susceptible to DOM photobleaching-induced decrease in kobs. Under the current experimental conditions, the photobleaching-induced decrease of DOM photo-reactivity in contaminant degradation was mainly attributed to indirect phototransformation of DOM caused by the interactions between photo-inductive DOM moieties and photochemically-produced reactive species. Reactive contaminants can inhibit DOM indirect photobleaching by scavenging reactive species, photosensitized degradation of these contaminants exhibited a stable kobs as a result. This is the first study to report DOM photobleaching-induced changes in the simultaneous DOM photosensitized degradation of contaminants and the inhibitory effect of reactive contaminants on DOM photobleaching.