Leaching and VOC Emission Tests of Polymer Composites Produced from Post-Consumer Waste in Terms of Application in the Construction Sector.

One of the existing priorities of the European Union is to search for rational waste management and to keep such waste in the economic cycle, while meeting the highest safety requirements. The paper presents the results of environmental tests of composites based on the polyethylene (rPE) and polypropylene (rPP) matrix and reinforced with cellulose fibres (newsprint, NP). Raw materials were obtained by recycling post-consumer waste such as beverage bottles and newsprint. The composites were tested for their potential use as materials in cladding panels and acoustic barriers. Given that normative documents for these products do not define specific environmental requirements, the composites were tested for the release of dangerous substances, such as anions of inorganic compounds, heavy metals, volatile organic compounds (VOCs), and their impact on the environment. A detailed in-depth analysis of the mechanisms of release of substances (diffusion, dissolution, surface leaching and depletion) from the rPP/NP composite into surface water, groundwater and soil was carried out. In turn, emission of VOCs from the rPE (low-density:high-density (LD:HD)-50:50) and rPE (LD:HD-30:70) composites into indoor air was also carried out. Raw materials in the form of granulates and loose cellulose fibres, used to produce the composites, were also tested for their environmental impact.

Comparison of VOC Emissions Produced by Different Types of Adhesives Based on Test Chambers.

Volatile organic compounds (VOCs) emitted from building materials into the indoor air may cause discomfort associated with a perceptible chemical odour and may irritate the upper respiratory tract. Hence, it is vital to control indoor air pollution sources, such as interior finishing materials, including adhesives. The study involved carrying out a series of experimental tests of VOC emissions of 25 adhesives based on the ISO 16000 series standards. The research concerns three groups of construction adhesives with indoor applications, i.e., flooring (10), finishing walls and ceilings (6), and for other applications such as edge-gluing or gluing tiles or mirrors (9) differing in chemical composition. A series of temperature tests were carried out for a representative floor adhesive at selected temperatures: 25 °C, 35 °C and 45 °C. The theoretical correlation approach was adopted to characterise the relationship between the emission rate and temperature of selected chemical compounds.

Ultrasensitive electrochemical determination of the cancer biomarker protein sPD-L1 based on a BMS-8-modified gold electrode.

This work describes the modification of a gold electrode with the BMS-8 compound that interacts with the Programmed Death-Ligand 1 (PD-L1), an immune checkpoint protein. The results show that we can confirm the presence of the sPD-L1 in the concentration range of 10-18 to 10-8 M using electrochemical impedance spectroscopy (EIS) with a limit of detection (LOD) of 1.87 × 10-14 M for PD-L1 (S/N = 3.3) and at a concentration of 10-14 M via cyclic voltammetry (CV). Additionally, high-resolution X-ray photoelectron spectroscopy (XPS), contact angle, and surface free energy measurements were applied to confirm the functionalization of the electrode. We investigated the selectivity of the electrode for other proteins: Programmed Death-1 (PD-1), cluster of differentiation 160 (CD160), and B- and T-lymphocyte attenuator (BTLA) at concentrations of 10-8 M. Differentiation between PD-L1 and PD-1 was achieved based on the analysis of the capacitance effect frequency dispersion at the surface of the modified Au electrode with BMS-8 after incubation at various concentrations of PD-L1 and PD-1 proteins in the range of 10-18 to 10-8 M. Significant differences were observed in the heterogeneity of PD-L1 and PD-1. The results of the quasi-capacitance studies demonstrate that BMS-8 strongly and specifically interacts with the PD-L1 protein.

Development of the Inhibitors that Target the PD-1/PD-L1 Interaction-A Brief Look at Progress on Small Molecules, Peptides and Macrocycles.

Cancer immunotherapy based on antibodies targeting the immune checkpoint PD-1/PD-L1 pathway has seen unprecedented clinical responses and constitutes the new paradigm in cancer therapy. The antibody-based immunotherapies have several limitations such as high production cost of the antibodies or their long half-life. Small-molecule inhibitors of the PD-1/PD-L1 interaction have been highly anticipated as a promising alternative or complementary therapeutic to the monoclonal antibodies (mAbs). Currently, the field of developing anti-PD-1/PD-L1 small-molecule inhibitors is intensively explored. In this paper, we review anti-PD-1/PD-L1 small-molecule and peptide-based inhibitors and discuss recent structural and preclinical/clinical aspects of their development. Discovery of the therapeutics based on small-molecule inhibitors of the PD-1/PD-L1 interaction represents a promising but challenging perspective in cancer treatment.

NMR fragment-based screening for development of the CD44-binding small molecules.

The cell-surface protein CD44, a primary receptor for hyaluronic acid (HA), is one of the most promising targets for cancer therapies. It is prominently involved in the process of tumor growth and metastasis. The possibility of modulating the CD44-HA interaction with a pharmacological inhibitor is therefore of great importance, yet until now there are only few small molecules reported to bind to CD44. Here, we describe the results of the NMR fragment-based screening conducted against CD44 by which we found eight new hit compounds that bind to the receptor with the affinity in milimolar range. The NMR-based characterization revealed that there are two possible binding modes for these compounds, and for some of them the binding is no longer possible in the presence of hyaluronic acid. This could provide an interesting starting point for the development of new high-affinity ligands targeting the CD44-HA axis.

A patent review on PD-1/PD-L1 antagonists: small molecules, peptides, and macrocycles (2015-2018).

INTRODUCTION: The protein-protein interaction PD1/PD-L1 is an important immune checkpoint and several recently approved monoclonal antibodies show promising anti cancer activities in the clinical practice. However, only a small percentage of cancer patients benefit from PD1/PD-L1 directed mAbs. Moreover, some patients experience immune related side effects upon treatment with these mAbs. Recently, several atomic-resolution structures of human PD1/PD-L1, and small molecules, peptides and mAbs with PD-L1 and PD1 open the field for structure based drug design. Small molecules and peptides targeting PD1/PD-L1 promise to enhance tumor activity while showing less immune related side effects. AREAS COVERED: We reviewed the small molecules classes and peptides targeting PD1/PD-L1. EXPERT OPINION: Currently approved PD1/PD-L1 directed therapeutics show room for improvement. Three classes of non mAb small molecule classes have been discovered so far: (cyclic) peptides as direct competitive PD1/PD-L1 antagonists; small molecules disrupting PD1/PD-L1 and inducing a PD-L1 dimerization; and a small molecule class of unknown mode-of-action. An example of the later group CA-170 is currently investigated in a Phase 1 trial in patients with advanced solid tumors and lymphomas. Potential advantages of small molecules over mAbs include high distribution and better tumor penetration, improved PK/PD, less side effects and oral bioavailability.

Small-molecule inhibitors of PD-1/PD-L1 immune checkpoint alleviate the PD-L1-induced exhaustion of T-cells.

Antibodies targeting the PD-1/PD-L1 immune checkpoint achieved spectacular success in anticancer therapy in the recent years. In contrast, no small molecules with cellular activity have been reported so far. Here we provide evidence that small molecules are capable of alleviating the PD-1/PD-L1 immune checkpoint-mediated exhaustion of Jurkat T-lymphocytes. The two optimized small-molecule inhibitors of the PD-1/PD-L1 interaction, BMS-1001 and BMS-1166, developed by Bristol-Myers Squibb, bind to human PD-L1 and block its interaction with PD-1, when tested on isolated proteins. The compounds present low toxicity towards tested cell lines and block the interaction of soluble PD-L1 with the cell surface-expressed PD-1. As a result, BMS-1001 and BMS-1166 alleviate the inhibitory effect of the soluble PD-L1 on the T-cell receptor-mediated activation of T-lymphocytes. Moreover, the compounds were effective in attenuating the inhibitory effect of the cell surface-associated PD-L1. We also determined the X-ray structures of the complexes of BMS-1001 and BMS-1166 with PD-L1, which revealed features that may be responsible for increased potency of the compounds compared to their predecessors. Further development may lead to the design of an anticancer therapy based on the orally delivered immune checkpoint inhibition.

Small-Molecule Inhibitors of the Programmed Cell Death-1/Programmed Death-Ligand 1 (PD-1/PD-L1) Interaction via Transiently Induced Protein States and Dimerization of PD-L1.

Blockade of the PD-1/PD-L1 immune checkpoint pathway with monoclonal antibodies has provided significant advances in cancer treatment. The antibody-based immunotherapies carry a number of disadvantages such as the high cost of the antibodies, their limited half-life, and immunogenicity. Development of small-molecule PD-1/PD-L1 inhibitors that could overcome these drawbacks is slow because of the incomplete structural information for this pathway. The first chemical PD-1/PD-L1 inhibitors have been recently disclosed by Bristol-Myers Squibb. Here we present NMR and X-ray characterization for the two classes of these inhibitors. The X-ray structures of the PD-L1/inhibitor complexes reveal one inhibitor molecule located at the center of the PD-L1 homodimer, filling a deep hydrophobic channel-like pocket between two PD-L1 molecules. Derivatives of (2-methyl-3-biphenylyl)methanol exhibit the structures capped on one side of the channel, whereas the compounds based on [3-(2,3-dihydro-1,4-benzodioxin-6-yl)-2-methylphenyl]methanol induce an enlarged interaction interface that results in the open "face-back" tunnel through the PD-L1 dimer.

1,4,5-Trisubstituted Imidazole-Based p53-MDM2/MDMX Antagonists with Aliphatic Linkers for Conjugation with Biological Carriers.

The tumor suppressor protein p53, the "guardian of the genome", is inactivated in nearly all cancer types by mutations in the TP53 gene or by overexpression of its negative regulators, oncoproteins MDM2/MDMX. Recovery of p53 function by disrupting the p53-MDM2/MDMX interaction using small-molecule antagonists could provide an efficient nongenotoxic anticancer therapy. Here we present the syntheses, activities, and crystal structures of the p53-MDM2/MDMX inhibitors based on the 1,4,5-trisubstituted imidazole scaffold which are appended with aliphatic linkers that enable coupling to bioactive carriers. The compounds have favorable properties at both biochemical and cellular levels. The most effective compound 19 is a tight binder of MDM2 and activates p53 in cancer cells that express the wild-type p53, leading to cell cycle arrest and growth inhibition. Crystal structures reveal that compound 19 induces MDM2 dimerization via the aliphatic linker. This unique dimerization-binding mode opens new prospects for the optimization of the p53-MDM2/MDMX inhibitors and conjugation with bioactive carriers.

Structural basis for small molecule targeting of the programmed death ligand 1 (PD-L1).

Targeting the PD-1/PD-L1 immunologic checkpoint with monoclonal antibodies has provided unprecedented results in cancer treatment in the recent years. Development of chemical inhibitors for this pathway lags the antibody development because of insufficient structural information. The first nonpeptidic chemical inhibitors that target the PD-1/PD-L1 interaction have only been recently disclosed by Bristol-Myers Squibb. Here, we show that these small-molecule compounds bind directly to PD-L1 and that they potently block PD-1 binding. Structural studies reveal a dimeric protein complex with a single small molecule which stabilizes the dimer thus occluding the PD-1 interaction surface of PD-L1s. The small-molecule interaction "hot spots" on PD-L1 surfaces suggest approaches for the PD-1/PD-L1 antagonist drug discovery.

Structure of the Complex of Human Programmed Death 1, PD-1, and Its Ligand PD-L1.

Targeting the PD-1/PD-L1 immunologic checkpoint with monoclonal antibodies has recently provided breakthrough progress in the treatment of melanoma, non-small cell lung cancer, and other types of cancer. Small-molecule drugs interfering with this pathway are highly awaited, but their development is hindered by insufficient structural information. This study reveals the molecular details of the human PD-1/PD-L1 interaction based on an X-ray structure of the complex. First, it is shown that the ligand binding to human PD-1 is associated with significant plasticity within the receptor. Second, a detailed molecular map of the interaction surface is provided, allowing definition of the regions within both interacting partners that may likely be targeted by small molecules.

Fragment-based library generation for the discovery of a peptidomimetic p53-Mdm4 inhibitor.

On the basis of our recently resolved first cocrystal structure of Mdm4 in complex with a small molecule inhibitor (PDB ID 3LBJ ), we devised an approach for the generation of potential Mdm4 selective ligands. We performed the Ugi four-component reaction (Ugi-4CR) in 96-well plates with an indole fragment, which is specially designed to mimic Trp23, a key amino acid for the interaction between p53 and Mdm4. Generally the reaction yielded mostly precipitates collected by 96-well filter plates. The best hit compound was found to be active and selective for Mdm4 (Ki=5 µM, 10-fold stronger than Mdm2). This initial hit may serve as the starting point for designing selective p53-Mdm4 inhibitor with higher affinity.