CoFeBP Micro Flowers (MFs) for Highly Efficient Hydrogen Evolution Reaction and Oxygen Evolution Reaction Electrocatalysts.

Hydrogen is one of the most promising green energy alternatives due to its high gravimetric energy density, zero-carbon emissions, and other advantages. In this work, a CoFeBP micro-flower (MF) electrocatalyst is fabricated as an advanced water-splitting electrocatalyst by a hydrothermal approach for hydrogen production with the highly efficient hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). The fabrication process of the CoFeBP MF electrocatalyst is systematically optimized by thorough investigations on various hydrothermal synthesis and post-annealing parameters. The best optimized CoFeBP MF electrode demonstrates HER/OER overpotentials of 20 mV and 219 mV at 20 mA/cm2. The CoFeBP MFs also exhibit a low 2-electrode (2-E) cell voltage of 1.60 V at 50 mA/cm2, which is comparable to the benchmark electrodes of Pt/C and RuO2. The CoFeBP MFs demonstrate excellent 2-E stability of over 100 h operation under harsh industrial operational conditions at 60 °C in 6 M KOH at a high current density of 1000 mA/cm2. The flower-like morphology can offer a largely increased electrochemical active surface area (ECSA), and systematic post-annealing can lead to improved crystallinity in CoFeBP MFs.

Dual-Functional Ru/Ni-B-P Electrocatalyst Toward Accelerated Water Electrolysis and High-Stability.

Development of advanced electrocatalysts for the green hydrogen production by water electrolysis is an important task to reduce the climate and environmental issues as well as to meet the future energy demands. Herein, Ru/Ni-B-P sphere electrocatalyst is demonstrated by a combination of hydrothermal and soaking approaches, meeting the industrial requirement of low cell voltage with stable high-current operation. The Ru/Ni-B-P sphere catalyst demonstrates low overpotentials of 191 and 350 mV at 300 mA cm-2 with stable high current operation, ranking it as one of the best oxygen evolution reaction (OER) electrocatalysts. The bifunctional 2-E system demonstrates a low cell voltage of 2.49 V at 2000 mA cm-2 in 6 m KOH at 60 °C of harsh industrial operation condition. It also demonstrates outstanding stability with continuous 120 h (5 days) CA operation at 1000 mA cm-2. Further, the hybrid configuration of Ru/Ni-B-P || Pt/C being paired with the conventional benchmark electrode demonstrates a record low 2-E cell voltage of 2.40 V at 2000 mA cm-2 in 6 m KOH and excellent stability at high current of 1500 mA cm-2 under industrial operational condition.

Evaluation of Heavy Metal Contamination in Soil Samples around Rampal, Bangladesh.

Rising soil pollution has recently emerged as a significant global issue as a result of increased industrialization, urbanization, and inadequate waste management. In Rampal Upazila, soil contamination with heavy metals resulted in a significant deterioration of quality of life and life expectancy, so the study's goal is to appraise the level of heavy metal contamination in soil samples. Inductively coupled plasma-optical emission spectrometry was used to identify 13 heavy metals (Al, Na, Cr, Co, Cu, Fe, Mg, Mn, Ni, Pb, Ca, Zn, and K) from 17 soil samples that were collected at random from Rampal. Enrichment factor (EF), geo-accumulation index (Igeo), contamination factor (CF), pollution load index, elemental fractionation, and potential ecological risk analysis were used to evaluate the level of pollution and sources of metal. The average concentration of heavy metals implies that they are below in the permissible limit except for Pb. Environmental indices also showed the same result for Pb. The ecological risk index (RI) for six elements-Mn, Zn, Cr, Fe, Cu, and Pb-is 26.575. For investigating the behavior and origin of elements, multivariate statistical analysis was also applied. From the EF, Na, Cr, Fe, and Mg are in the anthropogenic region, and Al, Co, Cu, Mn, Ni, Ca, K, and Zn are minorly polluted, but Pb is highly contaminated in the Rampal area. The geo-accumulation index exhibits that Pb is slightly contaminated but others are not, while CF shows no contamination in this region. From the ecological RI, the value which is below 150 is called uncontaminated, which indicates that our studied area is ecologically free. There are various classifications of heavy metal contamination in the study area. Therefore, regular monitoring of soil pollution is required, and the public awareness needs to be raised to ensure a safe environment.

MoS2 Nanoplatelets on Hybrid Core-Shell (HyCoS) AuPd NPs for Hybrid SERS Platform for Detection of R6G.

In this work, a novel hybrid SERS platform incorporating hybrid core-shell (HyCoS) AuPd nanoparticles (NPs) and MoS2 nanoplatelets has been successfully demonstrated for strong surface-enhanced Raman spectroscopy (SERS) enhancement of Rhodamine 6G (R6G). A significantly improved SERS signal of R6G is observed on the hybrid SERS platform by adapting both electromagnetic mechanism (EM) and chemical mechanism (CM) in a single platform. The EM enhancement originates from the unique plasmonic HyCoS AuPd NP template fabricated by the modified droplet epitaxy, which exhibits strong plasmon excitation of hotspots at the nanogaps of metallic NPs and abundant generation of electric fields by localized surface plasmon resonance (LSPR). Superior LSPR results from the coupling of distinctive AuPd core-shell NP and high-density background Au NPs. The CM enhancement is associated with the charge transfer from the MoS2 nanoplatelets to the R6G. The direct contact via mixing approach with optimal mixing ratio can effectively facilitate the charges transfer to the HOMO and LUMO of R6G, leading to the orders of Raman signal amplification. The enhancement factor (EF) for the proposed hybrid platform reaches ~1010 for R6G on the hybrid SERS platform.

How to clean a tubewell: the effectiveness of three approaches in reducing coliform bacteria.

Access to safe drinking water in rural Bangladesh remains a perpetual challenge. Most households are exposed to either arsenic or faecal bacteria in their primary source of drinking water, usually a tubewell. Improving tubewell cleaning and maintenance practices might reduce exposure to faecal contamination at a potentially low cost, but whether current cleaning and maintenance practices are effective remains uncertain, as does the extent to which best practice approaches might improve water quality. We used a randomized experiment to evaluate how effectively three approaches to cleaning a tubewell improved water quality, measured by total coliforms and E. coli. The three approaches comprise the caretaker's usual standard of care and two best-practice approaches. One best-practice approach, disinfecting the well with a weak chlorine solution, consistently improved water quality. However, when caretakers cleaned the wells themselves, they followed few of the steps involved in the best-practice approaches, and water quality declined rather than improved, although the estimated declines are not consistently statistically significant. The results suggest that, while improvements to cleaning and maintenance practices might help reduce exposure to faecal contamination in drinking water in rural Bangladesh, achieving widespread adoption of more effective practices would require significant behavioural change.

Hybrid UV Photodetector Design Incorporating AuPt Alloy Hybrid Nanoparticles, ZnO Quantum Dots, and Graphene Quantum Dots.

A hybrid device scheme is an attractive strategy in the construction of advanced UV photodetectors due to the flexibility in selecting the components and correspondingly improved optoelectronic properties by the cooperation of various components, which cannot be achieved by a single component device. In this work, a novel hybrid UV photodetector (PD) is demonstrated by adapting AuPt alloy hybrid nanoparticles (AHNPs), ZnO quantum dots (QDs), and graphene quantum dots (GQDs), namely, GQD/ZnO/AHNP PD. The optimized device achieves high-end figure-of-merit performance with a responsivity of 2299 mA/W, detectivity of 7.04 × 1010 jones, and external quantum efficiency of 741%. Enhanced photocurrent can be associated with the hot electron generation around the AuPt AHNPs and swift transfer to the conduction band of ZnO QDs. At the same time, the added carrier injection is achieved by a thin layer of GQDs. High density of hotspots and electromagnetic fields are generated by the strong localized surface plasmon resonance (LSPR) by the uniquely designed AuPt AHNPs with the fully alloyed AuPt NPs and adjacent small background Au NPs. The e-field distribution of various NP configurations is systematically investigated with finite-difference time-domain (FDTD) simulations.

Vanadium-Doped FeBP Microsphere Croissant for Significantly Enhanced Bi-Functional HER and OER Electrocatalyst.

Ultra-fine hydrogen produced by electrochemical water splitting without carbon emission is a high-density energy carrier, which could gradually substitute the usage of traditional fossil fuels. The development of high-performance electrocatalysts at affordable costs is one of the major research priorities in order to achieve the large-scale implementation of a green hydrogen supply chain. In this work, the development of a vanadium-doped FeBP (V-FeBP) microsphere croissant (MSC) electrocatalyst is demonstrated to exhibit efficient bi-functional water splitting for the first time. The FeBP MSC electrode is synthesized by a hydrothermal approach along with the systematic control of growth parameters such as precursor concentration, reaction duration, reaction temperature and post-annealing, etc. Then, the heteroatom doping of vanadium is performed on the best FeBP MSC by a simple soaking approach. The best optimized V-FeBP MSC demonstrates the low HER and OER overpotentials of 52 and 180 mV at 50 mA/cm2 in 1 M KOH in a three-electrode system. In addition, the two-electrode system, i.e., V-FeBP || V-FeBP, demonstrates a comparable water-splitting performance to the benchmark electrodes of Pt/C || RuO2 in 1 M KOH. Similarly, exceptional performance is also observed in natural sea water. The 3D MSC flower-like structure provides a very high surface area that favors rapid mass/electron-transport pathways, which improves the electrocatalytic activity. Further, the V-FeBP electrode is examined in different pH solutions and in terms of its stability under industrial operational conditions at 60 °C in 6 M KOH, and it shows excellent stability.

Design of a Highly Sensitive Photonic Crystal Fiber Sensor for Sulfuric Acid Detection.

In this research, a photonic crystal fiber (PCF)-based sulfuric acid detector is proposed and investigated to identify the exact concentration of sulfuric acid in a mixture with water. In order to calculate the sensing and propagation characteristics, a finite element method (FEM) based on COMSOL Multiphysics software is employed. The extensive simulation results verified that the proposed optical detector could achieve an ultra-high sensitivity of around 97.8% at optimum structural and operating conditions. Furthermore, the proposed sensor exhibited negligible loss with suitable numerical aperture and single-mode propagation at fixed operating conditions. In addition, the circular air holes in the core and cladding reduce fabrication complexity and can be easily produced using the current technology. Therefore, we strongly believe that the proposed detector will soon find its use in numerous industrial applications.

Rheological Analysis of Bio-ink for 3D Bio-printing Processes.

3D bio-printing is an emerging technology to fabricate tissue scaffold in-vitro through the controlled allocation of biomaterial and cells, which can mimic the in-vivo counterpart of living tissue. Live cells are often encapsulated into the biomaterials (i.e., bio-ink) and extruded by controlling the printing parameters. The functionality of the bioink depends upon three factors: (a) printability, (b) shape fidelity, and (c) bio-compatibility. Increasing viscosity will improve the printability and the shape fidelity but require higher applied extrusion pressure, which is detrimental to the living cell dwelling in the bio-ink, which is often ignored in the bio-ink optimization process. This paper demonstrates a roadmap to develop and optimize bio-inks, ensuring printability, shape fidelity, and cell survivability. The pressure exerted on the bio-ink during extrusion processes is measured analytically, and the information is incorporated in the bio-ink's rheology design. Cell-laden filaments are fabricated with multiple cell lines, i.e., Human Embryonic Kidney (HEK 293), BxPC3, and prostate cancer cells which are analyzed for cell viability. The cross-sectional live-dead assay of the extruded filament demonstrates a spatial pattern for HEK 293 cell viability, which correlates with our analytical finding of the shear stress at the nozzle tip. All three cell lines were able to sustain a transient shear stress of 3.7 kPa and demonstrate 90% viability with our designed bio-ink after 15 days of incubation. Simultaneously, the shape fidelity and printability matrices show its suitability for 3D bio-printing process.

Genomic characterization of the dominating Beta, V2 variant carrying vaccinated (Oxford-AstraZeneca) and nonvaccinated COVID-19 patient samples in Bangladesh: A metagenomics and whole-genome approach.

Bangladesh is experiencing a second wave of COVID-19 since March 2021, despite the nationwide vaccination drive with ChAdOx1 (Oxford-AstraZeneca) vaccine from early February 2021. Here, we characterized 19 nasopharyngeal swab (NPS) samples from COVID-19 suspect patients using genomic and metagenomic approaches. Screening for SARS-CoV-2 by reverse transcriptase polymerase chain reaction and metagenomic sequencing revealed 17 samples of COVID-19 positive (vaccinated = 10, nonvaccinated = 7) and 2 samples of COVID-19 negative. We did not find any significant correlation between associated factors including vaccination status, age or sex of the patients, diversity or abundance of the coinfected organisms/pathogens, and the abundance of SARS-CoV-2. Though the first wave of the pandemic was dominated by clade 20B, Beta, V2 (South African variant) dominated the second wave (January 2021 to May 2021), while the third wave (May 2021 to September 2021) was responsible for Delta variants of the epidemic in Bangladesh including both vaccinated and unvaccinated infections. Noteworthily, the receptor binding domain (RBD) region of S protein of all the isolates harbored similar substitutions including K417N, E484K, and N501Y that signify the Beta, while D614G, D215G, D80A, A67V, L18F, and A701V substitutions were commonly found in the non-RBD region of Spike proteins. ORF7b and ORF3a genes underwent a positive selection (dN/dS ratio 1.77 and 1.24, respectively), while the overall S protein of the Bangladeshi SARS-CoV-2 isolates underwent negative selection pressure (dN/dS = 0.621). Furthermore, we found different bacterial coinfections like Streptococcus agalactiae, Neisseria meningitidis, Elizabethkingia anophelis, Stenotrophomonas maltophilia, Klebsiella pneumoniae, and Pseudomonas plecoglossicida, expressing a number of antibiotic resistance genes such as tetA and tetM. Overall, this approach provides valuable insights on the SARS-CoV-2 genomes and microbiome composition from both vaccinated and nonvaccinated patients in Bangladesh.