An indenide-tethered N-heterocyclic stannylene.

The structure of (µ-1κN:2(η2),κ2 N,N'-(2-{[2,6-bis(propan-2-yl)phen-yl]aza-nid-yl}eth-yl)[2-(1H-inden-1-yl)eth-yl]aza-nido)(1,4,7,10,13,16-hexa-oxa-cyclo-octa-dec-ane-1κ6 O)lithiumtin, [LiSn(C8H16O4)(C25H31N2)], at 100 K has monoclinic (P21/n) symmetry. Analysis of the coordination of the Sn to the indenyl ring shows that the Sn inter-acts in an η2 fashion. A database survey showed that whilst this coordination mode is unusual for Ge and Pb compounds, Sn displays a wider range of coordination modes to cyclo-penta-dienyl ligands and their derivatives.

Preparation and reactivity of rhodium and iridium complexes containing a methylborohydride based unit supported by two 7-azaindolyl heterocycles.

The synthesis and characterisation of a new anionic flexible scorpionate ligand, methyl(bis-7-azaindolyl)borohydride [MeBai]- is reported herein. The ligand was coordinated to a series of group nine transition metal centres forming the complexes, [Ir(MeBai)(COD)] (1), [Rh(MeBai)(COD)] (2), [Rh(MeBai)(CODMe)] (2-Me) and [Rh(MeBai)(NBD)] (3), where COD = 1,5-cyclooctadiene, CODMe = 3-methyl-1,5-cyclooctadiene and NBD = 2,5-norbornadiene. In all cases, the boron based ligand was found to bind to the metal centres via a κ3-N,N,H coordination mode. The ligand and complexes were fully characterised by spectroscopic and analytical methods. The structures of the ligand and three of the complexes were confirmed by X-ray crystallography. The potential for migration of the "hydride" or "methyl" units from boron to the metal centre was also explored. During these studies an unusual transformation, involving the oxidation of the rhodium centre, was observed in complex 2. In this case, the η4-COD unit transformed into a η1,η3-C8H12 unit where the ring was bound via one sigma bond and one allyl unit. This is the first time such a transformation has been observed at a rhodium centre.

Aminophobanes: hydrolytic stability, tautomerism and application in Cr-catalysed ethene oligomerisation.

9-Amino-9-phosphabicyclo[3.3.1]nonanes, (PhobPNHR'; R = Me or (i)Pr) are readily prepared by aminolysis of PhobPCl and are significantly less susceptible to hydrolysis than the acyclic analogues Cy2PNHR'. Treatment of Cy2PNHMe with Cy2PCl readily gave Cy2PNMePCy2. By contrast, treatment of PhobPCl with PhobPNHMe in the presence of Et3N does not afford PhobPNMePPhob but instead the salt [PhobP(= NMeH)PPhob]Cl is formed which, upon addition of [PtCl2(NC(t)Bu)2] gives the zwitterionic complex [PtCl3(PhobP(= NMeH)PPhob)]. The neutral PhobP(= NMe)PPhob is accessible from PhobNMeLi and is converted to the chelate [PdCl2(PhobPNMePPhob)] by addition of [PdCl2(cod)]. The anomalous preference of the PhobP group for the formation of PPN products is discussed. The unsymmetrical diphos ligands PhobPNMePAr2 (Ar = Ph, o-Tol) are prepared, converted to [Cr(CO)4(PhobPNMePAr2)] and shown to form Cr-catalysts for ethene oligomerisation, producing a pattern of higher alkenes that corresponds to a Schulz-Flory distribution overlaid on selective tri/tetramerisation.

B-Methylated Amine-Boranes: Substituent Redistribution, Catalytic Dehydrogenation, and Facile Metal-Free Hydrogen Transfer Reactions.

Although the dehydrogenation chemistry of amine-boranes substituted at nitrogen has attracted considerable attention, much less is known about the reactivity of their B-substituted analogues. When the B-methylated amine-borane adducts, RR'NH·BH2Me (1a: R = R' = H; 1b: R = Me, R' = H; 1c: R = R' = Me; 1d: R = R' = iPr), were heated to 70 °C in solution (THF or toluene), redistribution reactions were observed involving the apparent scrambling of the methyl and hydrogen substituents on boron to afford a mixture of the species RR'NH·BH3-xMex (x = 0-3). These reactions were postulated to arise via amine-borane dissociation followed by the reversible formation of diborane intermediates and adduct reformation. Dehydrocoupling of 1a-1d with Rh(I), Ir(III), and Ni(0) precatalysts in THF at 20 °C resulted in an array of products, including aminoborane RR'N═BHMe, cyclic diborazane [RR'N-BHMe]2, and borazine [RN-BMe]3 based on analysis by in situ (11)B NMR spectroscopy, with peak assignments further supported by density functional theory (DFT) calculations. Significantly, very rapid, metal-free hydrogen transfer between 1a and the monomeric aminoborane, iPr2N═BH2, to yield iPr2NH·BH3 (together with dehydrogenation products derived from 1a) was complete within only 10 min at 20 °C in THF, substantially faster than for the N-substituted analogue MeNH2·BH3. DFT calculations revealed that the hydrogen transfer proceeded via a concerted mechanism through a cyclic six-membered transition state analogous to that previously reported for the reaction of the N-dimethyl species Me2NH·BH3 and iPr2N═BH2. However, as a result of the presence of an electron donating methyl substituent on boron rather than on nitrogen, the process was more thermodynamically favorable and the activation energy barrier was reduced.

Facile hydrolysis and alcoholysis of palladium acetate.

Palladium(II) acetate is readily converted into [Pd3 (µ(2) -OH)(OAc)5 ] (1) in the presence of water in a range of organic solvents and is also slowly converted in the solid state. Complex 1 can also be formed in nominally anhydrous solvents. Similarly, the analogous alkoxide complexes [Pd3 (µ(2) -OR)(OAc)5 ] (3) are easily formed in solutions of palladium(II) acetate containing a range of alcohols. An examination of a representative Wacker-type oxidation shows that the Pd-OH complex 1 and a related Pd-oxo complex 4 can be excluded as potential catalytic intermediates in the absence of exogenous water.

Iron-catalyzed dehydropolymerization: a convenient route to poly(phosphinoboranes) with molecular-weight control.

The catalyst loading is the key to control the molecular weight of the polymer in the iron-catalyzed dehydropolymerization of phosphine-borane adducts. Studies showed that the reaction proceeds through a chain-growth coordination-insertion mechanism.

Evidence for a SN2-type pathway in the exchange of phosphines at a [PhSe]+ centre.

A range of thio- and seleno-phosphonium cationic complexes [RE(PR'3)](+)[X](-) (R = Me, Ph; E = S, Se; X = GaCl4, SbF6) have been synthesised and structurally characterised. Reaction of [PhSPPh3][GaCl4] and [PhSePPh3][GaCl4] with P(t)Bu3 results in the ready transfer of the "RS(+)" and "RSe(+)" fragments from PPh3 to the stronger electron donor P(t)Bu3. NMR experiments combined with an Eyring analysis on the corresponding degenerate phosphine exchange reaction allowed the thermodynamic values for the phosphine exchange reaction of the sulfur cation (ΔH(‡) 18.7 ± 12.0 kJ mol(-1); ΔS(‡) -99.3 ± 36.3 J mol(-1) K(-1)) to be compared with the corresponding values (ΔH(‡) 2.4 ± 1.1 kJ mol(-1) and ΔS(‡) -58.1 ± 5.0 J mol(-1) K(-1)) for the [PhSePPh3](+) system. Importantly, the large negative entropy of activation and linear dependence on the rate of exchange are compatible with an SN2-type exchange process. This conclusion is supported by DFT calculations which confirm that the phosphine exchange process occurs via an associative mechanism. The rate of exchange was found to increase from sulfur to selenium and those with aryl substituents underwent exchange faster than those with alkyl substituents.

Influence of cyclopentadienyl ring-tilt on electron-transfer reactions: redox-induced reactivity of strained [2] and [3]ruthenocenophanes.

In contrast to ruthenocene [Ru(η(5) -C5 H5 )2 ] and dimethylruthenocene [Ru(η(5) -C5 H4 Me)2 ] (7), chemical oxidation of highly strained, ring-tilted [2]ruthenocenophane [Ru(η(5) -C5 H4 )2 (CH2 )2 ] (5) and slightly strained [3]ruthenocenophane [Ru(η(5) -C5 H4 )2 (CH2 )3 ] (6) with cationic oxidants containing the non-coordinating [B(C6 F5 )4 ](-) anion was found to afford stable and isolable metalmetal bonded dicationic dimer salts [Ru(η(5) -C5 H4 )2 (CH2 )2 ]2 [B(C6 F5 )4 ]2 (8) and [Ru(η(5) -C5 H4 )2 (CH2 )3 ]2 [B(C6 F5 )4 ]2 (17), respectively. Cyclic voltammetry and DFT studies indicated that the oxidation potential, propensity for dimerization, and strength of the resulting RuRu bond is strongly dependent on the degree of tilt present in 5 and 6 and thereby degree of exposure of the Ru center. Cleavage of the RuRu bond in 8 was achieved through reaction with the radical source [(CH3 )2 NC(S)SSC(S)N(CH3 )2 ] (thiram), affording unusual dimer [(CH3 )2 NCS2 Ru(η(5) -C5 H4 )(η(3) -C5 H4 )C2 H4 ]2 [B(C6 F5 )4 ]2 (9) through a haptotropic η(5) -η(3) ring-slippage followed by an apparent [2+2] cyclodimerization of the cyclopentadienyl ligand. Analogs of possible intermediates in the reaction pathway [C6 H5 ERu(η(5) -C5 H4 )2 C2 H4 ][B(C6 F5 )4 ] [E=S (15) or Se (16)] were synthesized through reaction of 8 with C6 H5 EEC6 H5 (E=S or Se).

Ring-opening polymerization of a strained [3]nickelocenophane: a route to polynickelocenes, a class of S = 1 metallopolymers.

We report the synthesis, reactivity studies, and ring-opening polymerization of a tricarba[3]nickelocenophane. The resulting green polynickelocene (5) possesses a -(CH2)3- spacer between the nickelocene units and is shown to be of high molecular weight. SQUID magnetometry measurements indicate that 5 is a macromolecular material with an S = 1 repeat unit.

TMEDA in iron-catalyzed Kumada coupling: amine adduct versus homoleptic "ate" complex formation.

The reactions of iron chlorides with mesityl Grignard reagents and tetramethylethylenediamine (TMEDA) under catalytically relevant conditions tend to yield the homoleptic "ate" complex [Fe(mes)3 ](-) (mes=mesityl) rather than adducts of the diamine, and it is this ate complex that accounts for the catalytic activity. Both [Fe(mes)3 ](-) and the related complex [Fe(Bn)3 ](-) (Bn=benzyl) react faster with representative electrophiles than the equivalent neutral [FeR2 (TMEDA)] complexes. Fe(I) species are observed under catalytically relevant conditions with both benzyl and smaller aryl Grignard reagents. The X-ray structures of [Fe(Bn)3 ](-) and [Fe(Bn)4 ](-) were determined; [Fe(Bn)4 ](-) is the first homoleptic σ-hydrocarbyl Fe(III) complex that has been structurally characterized.

A simple route to azaborinylphosphines: isoelectronic B-N analogues of arylphosphine ligands.

Azaborinylphosphines are readily prepared by the reaction of silylphosphines with a chloroborane under mild conditions; they are shown to contain P-B bonds that are sufficiently robust to allow these ligands to be used in homogeneous catalysis.

Tunable porous organic crystals: structural scope and adsorption properties of nanoporous steroidal ureas.

Previous work has shown that certain steroidal bis-(N-phenyl)ureas, derived from cholic acid, form crystals in the P6(1) space group with unusually wide unidimensional pores. A key feature of the nanoporous steroidal urea (NPSU) structure is that groups at either end of the steroid are directed into the channels and may in principle be altered without disturbing the crystal packing. Herein we report an expanded study of this system, which increases the structural variety of NPSUs and also examines their inclusion properties. Nineteen new NPSU crystal structures are described, to add to the six which were previously reported. The materials show wide variations in channel size, shape, and chemical nature. Minimum pore diameters vary from ~0 up to 13.1 Å, while some of the interior surfaces are markedly corrugated. Several variants possess functional groups positioned in the channels with potential to interact with guest molecules. Inclusion studies were performed using a relatively accessible tris-(N-phenyl)urea. Solvent removal was possible without crystal degradation, and gas adsorption could be demonstrated. Organic molecules ranging from simple aromatics (e.g., aniline and chlorobenzene) to the much larger squalene (M(w) = 411) could be adsorbed from the liquid state, while several dyes were taken up from solutions in ether. Some dyes gave dichroic complexes, implying alignment of the chromophores in the NPSU channels. Notably, these complexes were formed by direct adsorption rather than cocrystallization, emphasizing the unusually robust nature of these organic molecular hosts.

Alkene to carbyne: tandem Lewis acid activation and dehydrogenation of a molybdenum ethylene complex.

Carbyne formation: Treatment of a molybdenum ethylene complex with B(C6 F5 )3 induces ditopic activation of an ethylene ligand and acceptor-assisted ethane elimination to generate a novel type of zwitterionic carbyne complex.

Practical and highly selective sulfur ylide-mediated asymmetric epoxidations and aziridinations using a cheap and readily available chiral sulfide: extensive studies to map out scope, limitations, and rationalization of diastereo- and enantioselectivities.

The chiral sulfide, isothiocineole, has been synthesized in one step from elemental sulfur, γ-terpinene, and limonene in 61% yield. A mechanism involving radical intermediates for this reaction is proposed based on experimental evidence. The application of isothiocineole to the asymmetric epoxidation of aldehydes and the aziridination of imines is described. Excellent enantioselectivities and diastereoselectivities have been obtained over a wide range of aromatic, aliphatic, and α,ß-unsaturated aldehydes using simple protocols. In aziridinations, excellent enantioselectivities and good diastereoselectivities were obtained for a wide range of imines. Mechanistic models have been put forward to rationalize the high selectivities observed, which should enable the sulfide to be used with confidence in synthesis. In epoxidations, the degree of reversibility in betaine formation dominates both the diastereoselectivity and the enantioselectivity. Appropriate tuning of reaction conditions based on understanding the reaction mechanism enables high selectivities to be obtained in most cases. In aziridinations, betaine formation is nonreversible with semistabilized ylides and diastereoselectivities are determined in the betaine forming step and are more variable as a result.

Mechanisms of the thermal and catalytic redistributions, oligomerizations, and polymerizations of linear diborazanes.

Linear diborazanes R3N-BH2-NR2-BH3 (R = alkyl or H) are often implicated as key intermediates in the dehydrocoupling/dehydrogenation of amine-boranes to form oligo- and polyaminoboranes. Here we report detailed studies of the reactivity of three related examples: Me3N-BH2-NMe2-BH3 (1), Me3N-BH2-NHMe-BH3 (2), and MeNH2-BH2-NHMe-BH3 (3). The mechanisms of the thermal and catalytic redistributions of 1 were investigated in depth using temporal-concentration studies, deuterium labeling, and DFT calculations. The results indicated that, although the products formed under both thermal and catalytic regimes are identical (Me3N·BH3 (8) and [Me2N-BH2]2 (9a)), the mechanisms of their formation differ significantly. The thermal pathway was found to involve the dissociation of the terminal amine to form [H2B(µ-H)(µ-NMe2)BH2] (5) and NMe3 as intermediates, with the former operating as a catalyst and accelerating the redistribution of 1. Intermediate 5 was then transformed to amine-borane 8 and the cyclic diborazane 9a by two different mechanisms. In contrast, under catalytic conditions (0.3-2 mol % IrH2POCOP (POCOP = κ(3)-1,3-(OPtBu2)2C6H3)), 8 was found to inhibit the redistribution of 1 by coordination to the Ir-center. Furthermore, the catalytic pathway involved direct formation of 8 and Me2N═BH2 (9b), which spontaneously dimerizes to give 9a, with the absence of 5 and BH3 as intermediates. The mechanisms elucidated for 1 are also likely to be applicable to other diborazanes, for example, 2 and 3, for which detailed mechanistic studies are impaired by complex post-redistribution chemistry. This includes both metal-free and metal-mediated oligomerization of MeNH═BH2 (10) to form oligoaminoborane [MeNH-BH2]x (11) or polyaminoborane [MeNH-BH2]n (16) following the initial redistribution reaction.

Copper and silver complexes bearing flexible hybrid scorpionate ligand mpBm.

The addition of flexible scorpionate ligand, [mpBm]⁻{i.e. HB(mt)2(mp), where mt = methyl-2-mercaptoimidazole and mp = 2-mercaptopyridine} to group eleven centres is reported for the first time. The coordination of this hybrid ligand to copper(I) and silver(I) centres in the presence of triphenylphosphine and trialkylphosphine co-ligands has been investigated. The trialkylphosphines coordinates to both copper and silver centres while the less basic triarylphosphine only successfully coordinates to the copper centre. Structural characterisation of [Cu{HB(mt)2(mp)}(PPh3)], [Cu{HB(mt)2(mp)}(PCy3)] and [Ag{HB(mt)2(mp)}(PCy3)] confirm κ³-SSH coordination modes for ligand where one of the mt 'arms' and the mp 'arm' of the scorpionate ligand are coordinated to the metal centre. The second mt 'arm' remains uncoordinated in all three complexes. A comparison has been made with the parent sulfur based scorpionate ligand, [Tm]⁻{HB(mt)3}.

New Cu(I)-ethylene complexes based on tridentate imine ligands: synthesis and structure.

A new bulky facially coordinating N3-donor tach-based ligand (tach: cis,cis-1,3,5-triaminocyclohexane) [1: cis,cis-1,3,5-tris(2-fluoro-6-(trifluoromethyl)benzylideneamino)cyclohexane] has been obtained from the condensation of tach with 3 equiv of the appropriate benzaldehyde. Reaction of 1 with [Cu(NCMe)4][PF6] gave the complex [(1)Cu(NCMe)][PF6]. Displacement of the acetonitrile ligand is possible with CO and C2H4 (3-5 bar). Cu(I)-ethylene complexes of ligands 1 and 2 [2: cis,cis-1,3,5-(mesitylideneamino)cyclohexane] were prepared successfully by treatment of the ligands with CuBr and AgSbF6 in the presence of ethylene. These complexes display reversible complexation of the ethylene molecule under mild changes to pressure, suggesting possible application in olefin separation and extraction.

A new class of remote N-heterocyclic carbenes with exceptionally strong σ-donor properties: introducing benzo[c]quinolin-6-ylidene.

We make the case for benzo[c]quinolin-6-ylidene (1) as a strongly electron-donating carbene ligand. The facile synthesis of 6-trifluoromethanesulfonylbenzo[c]quinolizinium trifluoromethanesulfonate (2) gives straightforward access to a useful precursor for oxidative addition to low-valent metals, to yield the desired carbene complexes. This concept has been achieved in the case of [Mn(benzo[c]quinolin-6-ylidene)(CO)5](+) (15) and [Pd(benzo[c]quinolin-6-ylidene)(PPh3)2(L)](2+) L = THF (21), OTf (22) or pyridine (23). Attempts to coordinate to nickel result in coupling products from two carbene precursor fragments. The CO IR-stretching-frequency data for the manganese compound suggests benzo[c]quinolin-6-ylidene is at least as strong a donor as any heteroatom-stabilised carbene ligand reported.

Interplay of bite angle and cone angle effects. A comparison between o-C6H4(CH2PR2)(PR'2) and o-C6H4(CH2PR2)(CH2PR'2) as ligands for Pd-catalysed ethene hydromethoxycarbonylation.

The following unsymmetrical diphosphines have been prepared: o-C6H4(CH2PtBu2)(PR2) where R = PtBu2 (L3a); PCg (L3b); PPh2 (L3c); P(o-C6H4CH3)2 (L3d); P(o-C6H4OCH3)2 (L3e) and o-C6H4(CH2PCg)(PCg) (L3f) where PCg is 6-phospha-2,4,8-trioxa-1,3,5,7-tetramethyladamant-6-yl. Hydromethoxycarbonylation of ethene under commercially relevant conditions has been investigated in the presence of Pd complexes of each of the ligands L3a­f and the results compared with those obtained with the commercially used o-C6H4(CH2PtBu2)2 (L1a). The Pd complexes of the bulkiest ligands L3a, L3b and L3f are highly active catalysts but the Pd complexes of L3c, L3d and L3e are completely inactive. The crystal structures of the complexes [PtCl2(L1a)] (1a) and [PtCl2(L3a)] (2a) have been determined and show that the crystallographic bite angles and cone angles are greater for L1a than L3a. Solution NMR studies show that the seven-membered chelate in 1a is more rigid than the six-membered chelate in 2a. Treatment of [PtCl(CH3)(cod)] with L3a­f gave [PtCl(CH3)(L3a­f)] as mixtures of 2 isomers 3a­f and 4a­f. The ratio of the products 4:3 ranges from 100:1 to 1:20, the precise proportion is apparently governed by a balance of two competing factors, steric bulk and the antisymbiotic effect. The palladium complexes [PdCl(CH3)(L3b)] (5b/6b) and [PdCl(CH3)(L3c)] (5c/6c) react with labelled 13CO to give the corresponding acyl species [PdCl(13COCH3)(L3b)] (7b/8b) and [PdCl(13COCH3)(L3c)] (7c/8c). Treatment of [PdCl(13COCH3)(L)] with MeOH gave CH3(13)COOMe rapidly when L = L3b but very slowly when L = L3c paralleling the contrasting catalytic activity of the Pd complexes of these two ligands.