PEGylated Recombinant Aplysia punctata Ink Toxin Depletes Arginine and Lysine and Inhibits the Growth of Tumor Xenografts.

In recent years, a novel treatment method for cancer has emerged, which is based on the starvation of tumors of amino acids like arginine. The deprivation of arginine in serum is based on enzymatic degradation and can be realized by arginine deaminases like the l-amino acid oxidase found in the ink toxin of the sea hare Aplysia punctata. Previously isolated from the ink, the l-amino acid oxidase was described to oxidate the essential amino acids l-lysine and l-arginine to their corresponding deaminated alpha-keto acids. Here, we present the recombinant production and functionalization of the amino acid oxidase Aplysia punctata ink toxin (APIT). PEGylated APIT (APIT-PEG) increased the blood circulation time. APIT-PEG treatment of patient-derived xenografted mice shows a significant dose-dependent reduction of tumor growth over time mediated by amino acid starvation of the tumor. Treatment of mice with APIT-PEG, which led to deprivation of arginine, was well tolerated.

Perfusable Tissue Bioprinted into a 3D-Printed Tailored Bioreactor System.

Bioprinting provides a powerful tool for regenerative medicine, as it allows tissue construction with a patient's specific geometry. However, tissue culture and maturation, commonly supported by dynamic bioreactors, are needed. We designed a workflow that creates an implant-specific bioreactor system, which is easily producible and customizable and supports cell cultivation and tissue maturation. First, a bioreactor was designed and different tissue geometries were simulated regarding shear stress and nutrient distribution to match cell culture requirements. These tissues were then directly bioprinted into the 3D-printed bioreactor. To prove the ability of cell maintenance, C2C12 cells in two bioinks were printed into the system and successfully cultured for two weeks. Next, human mesenchymal stem cells (hMSCs) were successfully differentiated toward an adipocyte lineage. As the last step of the presented strategy, we developed a prototype of an automated mobile docking station for the bioreactor. Overall, we present an open-source bioreactor system that is adaptable to a wound-specific geometry and allows cell culture and differentiation. This interdisciplinary roadmap is intended to close the gap between the lab and clinic and to integrate novel 3D-printing technologies for regenerative medicine.

Matrix Metalloproteinase-Responsive Delivery of PEGylated Fibroblast Growth Factor 2.

Attachment of polyethylene glycol (PEG) chains is a common, well-studied, and Food and Drug Administration-approved method to address the pharmacokinetic challenges of therapeutic proteins. Occasionally, PEGylation impairs the activity of pharmacodynamics (PD). To overcome this problem, disease-relevant cleavable linkers between the polymer and the therapeutic protein can unleash full PD by de-PEGylating the protein at its target site. In this study, we engineered a matrix metalloproteinase (MMP)-responsive fibroblast growth factor 2 (FGF-2) mutant that was site-specifically extended with a PEG polymer chain. Using bioinspired strategies, the bioconjugate was designed to release the native protein at the desired structure/environment with preservation of the proliferative capacity in vitro on NIH3T3 cells. In vivo, hepatic exposure was diminished but not its renal distribution over time compared to unconjugated FGF-2. By releasing the growth factor from the PEG polymer in response to MMP cleavage, restored FGF-2 may enter hard-to-reach tissues and activate cell surface receptors or nuclear targets.

PEGylation of Human Vascular Endothelial Growth Factor.

Vascular endothelial growth factor A-165 (VEGF-A165) positively modulates neointimal hyperplasia, lumen stenosis, and neovascularization. One challenge for the use of VEGF-A165 for potential therapy is its short serum half-life. Therefore, we are designing VEGF-A165 bioconjugates carrying polyethylene glycol (PEG). The purity of the recombinantly expressed human VEGF-A165 exceeded 90%. The growth factor had a half-maximal effective concentration of 0.9 ng/mL (EC50) and induced tube formation of human umbilical vein endothelial cells. PEGylation was conducted by Schiff base reaction followed by reductive amination. After purification, two species were obtained, with one or two PEG attached per VEGF-A165 dimer. Both resulting bioconjugates had a purity exceeding 90%, wild-type bioactivity, and increased hydrodynamic radii as required for prolonging the half-life.

Jackdaws form categorical prototypes based on experience with category exemplars.

Categorization represents one cognitive ability fundamental to animal behavior. Grouping of elements based on perceptual or semantic features helps to reduce processing resources and facilitates appropriate behavior. Corvids master complex categorization, yet the detailed categorization learning strategies are less well understood. We trained two jackdaws on a delayed match to category paradigm using a novel, artificial stimulus type, RUBubbles. Both birds learned to differentiate between two session-unique categories following two distinct learning protocols. Categories were either introduced via central category prototypes (low variability approach) or using a subset of diverse category exemplars from which diagnostic features had to be identified (high variability approach). In both versions, the stimulus similarity relative to a central category prototype explained categorization performance best. Jackdaws consistently used a central prototype to judge category membership, regardless of whether this prototype was used to introduce distinct categories or had to be inferred from multiple exemplars. Reliance on a category prototype occurred already after experiencing only a few trials with different category exemplars. High stimulus set variability prolonged initial learning but showed no consistent beneficial effect on later generalization performance. High numbers of stimuli, their perceptual similarity, and coherent category structure resulted in a prototype-based strategy, reflecting the most adaptive, efficient, and parsimonious way to represent RUBubble categories. Thus, our birds represent a valuable comparative animal model that permits further study of category representations throughout learning in different regions of a brain producing highly cognitive behavior.

An exploratory study on the effect of mechanical stress on particle formation in monoclonal antibody infusions.

Monoclonal antibody infusions (mAb-i) are administered for the treatment of various diseases. They are often transported over long distances from the compounding site to the site of administration. However, transport studies are typically carried out with the original drug product but not with compounded mAb-i. To address this gap, the impact of mechanical stress on the formation of subvisible/nanoparticles in mAb-i was investigated by dynamic light scattering and flow imaging microscopy. Different mAb-i concentrations were subjected to vibrational orbital shaking and stored at 2-8°C up to 35 days. The screening revealed that pembrolizumab and bevacizumab infusions show the highest propensity for particle formation. Especially bevacizumab at low concentrations exhibited an increase in particle formation. Because of the unknown health risks associated with the long-term application of subvisible particles (SVPs)/nanoparticles in infusion bags, stability studies carried out in the frame of licensing application procedures should also focus on SVP formation in mAb-i. In general, pharmacists should minimize the time of storage and mechanical stress during transport, especially in the case of low-concentrated mAb-i. Moreover, if siliconized syringes are used, they should be washed once with saline solution to minimize particle entry.

Unraveling an Alternative Mechanism in Polymer Self-Assemblies: An Order-Order Transition with Unusual Molecular Interactions between Hydrophilic and Hydrophobic Polymer Blocks.

Polymer self-assembly leading to cooling-induced hydrogel formation is relatively rare for synthetic polymers and typically relies on H-bonding between repeat units. Here, we describe a non-H-bonding mechanism for a cooling-induced reversible order-order (sphere-to-worm) transition and related thermogelation of solutions of polymer self-assemblies. A multitude of complementary analytical tools allowed us to reveal that a significant fraction of the hydrophobic and hydrophilic repeat units of the underlying block copolymer is in close proximity in the gel state. This unusual interaction between hydrophilic and hydrophobic blocks reduces the mobility of the hydrophilic block significantly by condensing the hydrophilic block onto the hydrophobic micelle core, thereby affecting the micelle packing parameter. This triggers the order-order transition from well-defined spherical micelles to long worm-like micelles, which ultimately results in the inverse thermogelation. Molecular dynamics modeling indicates that this unexpected condensation of the hydrophilic corona onto the hydrophobic core is due to particular interactions between amide groups in the hydrophilic repeat units and phenyl rings in the hydrophobic ones. Consequently, changes in the structure of the hydrophilic blocks affecting the strength of the interaction could be used to control macromolecular self-assembly, thus allowing for the tuning of gel characteristics such as strength, persistence, and gelation kinetics. We believe that this mechanism might be a relevant interaction pattern for other polymeric materials as well as their interaction in and with biological environments. For example, controlling the gel characteristics could be considered important for applications in drug delivery or biofabrication.

Executive Control of Sequence Behavior in Pigeons Involves Two Distinct Brain Regions.

Executive functions arise from multiple regions of the brain acting in concert. To facilitate such cross-regional computations, the brain is organized into distinct executive networks, like the frontoparietal network. Despite similar cognitive abilities across many domains, little is known about such executive networks in birds. Recent advances in avian fMRI have shown a possible subset of regions, including the nidopallium caudolaterale (NCL) and the lateral part of medial intermediate nidopallium (NIML), that may contribute to complex cognition, forming an action control system of pigeons. We investigated the neuronal activity of NCL and NIML. Single-cell recordings were obtained during the execution of a complex sequential motor task that required executive control to stop executing one behavior and continue with a different one. We compared the neuronal activity of NIML to NCL and found that both regions fully processed the ongoing sequential execution of the task. Differences arose from how behavioral outcome was processed. Our results indicate that NCL takes on a role in evaluating outcome, while NIML is more tightly associated with ongoing sequential steps. Importantly, both regions seem to contribute to overall behavioral output as parts of a possible avian executive network, crucial for behavioral flexibility and decision-making.

Oral Use of Therapeutic Carbon Monoxide for Anyone, Anywhere, and Anytime.

Carbon monoxide (CO) is a therapeutic gas with therapeutic potential in intestinal bowel disease. Therapeutic efficacy in the gastrointestinal tract (GIT) must be paired with safe and convenient use. Therefore, we designed an oral CO releasing system (OCORS) pairing tunable CO release into the GIT while preventing the release of any other molecule from within the device, causing safety concerns. The dimensions of the device, which is manufactured from 3D printed components, are within compendial limits. This is achieved by controlling CO decarbonylation from a molybdenum complex with a FeCl3 solution. OCORS' surrounding silicon membranes control release rates, as does the loading with carbonylated molybdenum complex and FeCl3 solution. Herein we describe the development of the system, the characterization of the CO releasing molecule (CORM), and the CO release kinetics of the overall system. Neither the CORM nor isocyanoacetate as a potential reaction byproduct were cytotoxic. Finally, we demonstrated by design validation in an in vivo porcine model that, except for the release of the therapeutic CO, OCORS isolates all components during transit through the stomach. We could show that OCORS generated and released CO locally into the stomach of the animals without systemic exposure, measured as the carboxyhemoglobin content in the blood of the pigs. In conclusion, OCORS derisks oral development by limiting patient exposure to (desirable) CO while preventing contact with any further (undesirable) chemical, by-, or degradation products. CO generating devices come in reach, which now can be used by anyone, anywhere, and anytime.

Oscillations without cortex: Working memory modulates brainwaves in the endbrain of crows.

Complex cognition requires coordinated neuronal activity at the network level. In mammals, this coordination results in distinct dynamics of local field potentials (LFP) central to many models of higher cognition. These models often implicitly assume a cortical organization. Higher associative regions of the brains of birds do not have cortical layering, yet single-cell correlates of higher cognition are very similar to those found in mammals. We recorded LFP in the avian equivalent of prefrontal cortex while crows performed a highly controlled and cognitively demanding working memory task. We found signatures in local field potentials, modulated by working memory. Frequencies of a narrow gamma and the beta band contained information about the location of target items and were modulated by working memory load. This indicates a critical involvement of these bands in ongoing cognitive processing. We also observed bursts in the beta and gamma frequencies, similar to those that play a vital part in 'activity silent' models of working memory. Thus, despite the lack of a cortical organization the avian associative pallium can create LFP signatures reminiscent of those observed in primates. This points towards a critical cognitive function of oscillatory dynamics evolved through convergence in species capable of complex cognition.

Merging bioresponsive release of insulin-like growth factor I with 3D printable thermogelling hydrogels.

3D printing of biomaterials enables spatial control of drug incorporation during automated manufacturing. This study links bioresponsive release of the anabolic biologic, insulin-like growth factor-I (IGF-I) in response to matrix metalloproteinases (MMP) to 3D printing using the block copolymer of poly(2-methyl-2-oxazoline) and thermoresponsive poly(2-n-propyl-2-oxazine) (POx-b-POzi). For that, a chemo-enzymatic synthesis was deployed, ligating IGF-I enzymatically to a protease sensitive linker (PSL), which was conjugated to a POx-b-POzi copolymer. The product was blended with the plain thermogelling POx-b-POzi hydrogel. MMP exposure of the resulting hydrogel triggered bioactive IGF-I release. The bioresponsive IGF-I containing POx-b-POzi hydrogel system was further detailed for shape control and localized incorporation of IGF-I via extrusion 3D printing for future applications in biomedicine and biofabrication.

A thermogelling organic-inorganic hybrid hydrogel with excellent printability, shape fidelity and cytocompatibility for 3D bioprinting.

Alginates are the most commonly used bioink in biofabrication, but their rheological profiles make it very challenging to perform real 3D printing. In this study, an advanced hybrid hydrogel ink was developed, a mixture of thermogelling diblock copolymer, alginate and clay i.e. Laponite XLG. The reversible thermogelling and shear thinning properties of the diblock copolymer in the ink system improves handling and 3D printability significantly. Various three-dimensional constructs, including suspended filaments, were printed successfully with high shape fidelity and excellent stackability. Subsequent ionic crosslinking of alginate fixates the printed scaffolds, while the diblock copolymer is washed out of the structure, acting as a fugitive material/porogen on the (macro)molecular level. Finally, cell-laden printing and culture over 21 d demonstrated good cytocompatibility and feasibility of the novel hybrid hydrogels for 3D bioprinting. We believe that the developed approach could be interesting for a wide range of bioprinting applications including tissue engineering and drug screening, potentially enabling also other biological bioinks such as collagen, hyaluronic acid, decellularized extracellular matrices or cellulose based bioinks.

Working memory capacity of crows and monkeys arises from similar neuronal computations.

Complex cognition relies on flexible working memory, which is severely limited in its capacity. The neuronal computations underlying these capacity limits have been extensively studied in humans and in monkeys, resulting in competing theoretical models. We probed the working memory capacity of crows (Corvus corone) in a change detection task, developed for monkeys (Macaca mulatta), while we performed extracellular recordings of the prefrontal-like area nidopallium caudolaterale. We found that neuronal encoding and maintenance of information were affected by item load, in a way that is virtually identical to results obtained from monkey prefrontal cortex. Contemporary neurophysiological models of working memory employ divisive normalization as an important mechanism that may result in the capacity limitation. As these models are usually conceptualized and tested in an exclusively mammalian context, it remains unclear if they fully capture a general concept of working memory or if they are restricted to the mammalian neocortex. Here, we report that carrion crows and macaque monkeys share divisive normalization as a neuronal computation that is in line with mammalian models. This indicates that computational models of working memory developed in the mammalian cortex can also apply to non-cortical associative brain regions of birds.

Working memory is the brain's ability to temporarily hold and manipulate information. It is essential for carrying out complex cognitive tasks, such as reasoning, planning, following instructions or solving problems. Unlike long-term memory, information is not stored and recalled, but held in an accessible state for brief periods. However, the capacity of working memory is very limited. Humans, for example, can only hold around four items of information simultaneously. There are various competing theories about how this limitation arises from the network of neurons in the brain. These models are based on studies of humans and other primates. But memory limitations are not exclusive to mammals. Indeed, the working memory of some birds, such as crows, has a similar capacity to humans despite the architecture of their brains being very different to mammals. So, how do brains with such distinct structural differences produce working memories with similar capacities? To investigate, Hahn et al. probed the working memory of carrion crows in a change detection task developed for macaque monkeys. Crows were trained to memorize varying numbers of colored squares and indicate which square had changed after a one second delay when the screen went blank. While the crows performed the task, Hahn et al. measured the activity of neurons in an area of the brain equivalent to the prefrontal cortex, the central hub of cognition in mammals. The experiments showed that neurons in the crow brain responded to the changing colors virtually the same way as neurons in monkeys. Hahn et al. also noticed that increasing the number of items the crows had to remember affected individual neurons in a similar fashion as had previously been observed in monkeys. This suggests that birds and monkeys share the same central mechanisms of, and limits to, working memory despite differences in brain architecture. The similarities across distantly related species also validates core ideas about the limits of working memory developed from studies of mammals.

Freeform direct laser writing of versatile topological 3D scaffolds enabled by intrinsic support hydrogel.

In this study, a novel approach to create arbitrarily shaped 3D hydrogel objects is presented, wherein freeform two-photon polymerization (2PP) is enabled by the combination of a photosensitive hydrogel and an intrinsic support matrix. This way, topologies without physical contact such as a highly porous 3D network of concatenated rings were realized, which are impossible to manufacture with most current 3D printing technologies. Micro-Raman and nanoindentation measurements show the possibility to control water uptake and hence tailor the Young's modulus of the structures via the light dosage, proving the versatility of the concept regarding many scaffold characteristics that makes it well suited for cell specific cell culture as demonstrated by cultivation of human induced pluripotent stem cell derived cardiomyocytes.

Tuning the Thermogelation and Rheology of Poly(2-Oxazoline)/Poly(2-Oxazine)s Based Thermosensitive Hydrogels for 3D Bioprinting.

As one kind of "smart" material, thermogelling polymers find applications in biofabrication, drug delivery and regenerative medicine. In this work, we report a thermosensitive poly(2-oxazoline)/poly(2-oxazine) based diblock copolymer comprising thermosensitive/moderately hydrophobic poly(2-N-propyl-2-oxazine) (pPrOzi) and thermosensitive/moderately hydrophilic poly(2-ethyl-2-oxazoline) (pEtOx). Hydrogels were only formed when block length exceeded certain length (≈100 repeat units). The tube inversion and rheological tests showed that the material has then a reversible sol-gel transition above 25 wt.% concentration. Rheological tests further revealed a gel strength around 3 kPa, high shear thinning property and rapid shear recovery after stress, which are highly desirable properties for extrusion based three-dimensional (3D) (bio) printing. Attributed to the rheology profile, well resolved printability and high stackability (with added laponite) was also possible. (Cryo) scanning electron microscopy exhibited a highly porous, interconnected, 3D network. The sol-state at lower temperatures (in ice bath) facilitated the homogeneous distribution of (fluorescently labelled) human adipose derived stem cells (hADSCs) in the hydrogel matrix. Post-printing live/dead assays revealed that the hADSCs encapsulated within the hydrogel remained viable (≈97%). This thermoreversible and (bio) printable hydrogel demonstrated promising properties for use in tissue engineering applications.

From Thermogelling Hydrogels toward Functional Bioinks: Controlled Modification and Cytocompatible Crosslinking.

Hydrogels are key components in bioink formulations to ensure printability and stability in biofabrication. In this study, a well-known Diels-Alder two-step post-polymerization modification approach is introduced into thermogelling diblock copolymers, comprising poly(2-methyl-2-oxazoline) and thermoresponsive poly(2-n-propyl-2-oxazine). The diblock copolymers are partially hydrolyzed and subsequently modified by acid/amine coupling with furan and maleimide moieties. While the thermogelling and shear-thinning properties allow excellent printability, trigger-less cell-friendly Diels-Alder click-chemistry yields long-term shape-fidelity. The introduced platform enables easy incorporation of cell-binding moieties (RGD-peptide) for cellular interaction. The hydrogel is functionalized with RGD-peptides using thiol-maleimide chemistry and cell proliferation as well as morphology of fibroblasts seeded on top of the hydrogels confirm the cell adhesion facilitated by the peptides. Finally, bioink formulations are tested for biocompatibility by incorporating fibroblasts homogenously inside the polymer solution pre-printing. After the printing and crosslinking process good cytocompatibility is confirmed. The established bioink system combines a two-step approach by physical precursor gelation followed by an additional chemical stabilization, offering a broad versatility for further biomechanical adaptation or bioresponsive peptide modification.

An Inverse Thermogelling Bioink Based on an ABA-Type Poly(2-oxazoline) Amphiphile.

Hydrogels are key components in several biomedical research areas such as drug delivery, tissue engineering, and biofabrication. Here, a novel ABA-type triblock copolymer comprising poly(2-methyl-2-oxazoline) as the hydrophilic A blocks and poly(2-phenethyl-2-oxazoline) as the aromatic and hydrophobic B block is introduced. Above the critical micelle concentration, the polymer self-assembles into small spherical polymer micelles with a hydrodynamic radius of approx 8-8.5 nm. Interestingly, this specific combination of hydrophilic and hydrophobic aromatic moieties leads to rapid thermoresponsive inverse gelation at polymer concentrations above a critical gelation concentration (20 wt %) into a macroporous hydrogel of densely packed micelles. This hydrogel exhibited pronounced viscoelastic solid-like properties, as well as extensive shear-thinning, rapid structure recovery, and good strain resistance properties. Excellent 3D-printability of the hydrogel at lower temperature opens a wide range of different applications, for example, in the field of biofabrication. In preliminary bioprinting experiments using NIH 3T3 cells, excellent cell viabilities of more than 95% were achieved. The particularly interesting feature of this novel material is that it can be used as a printing support in hybrid bioink systems and sacrificial bioink due to rapid dissolution at physiological conditions.

Development of a 3D printable and highly stretchable ternary organic-inorganic nanocomposite hydrogel.

Hydrogels that can be processed with additive manufacturing techniques and concomitantly possess favorable mechanical properties are interesting for many advanced applications. However, the development of novel ink materials with high intrinsic 3D printing performance has been proven to be a major challenge. Herein, a novel 3D printable organic-inorganic hybrid hydrogel is developed from three components, and characterized in detail in terms of rheological property, swelling behavior and composition. The nanocomposite hydrogel combines a thermoresponsive hydrogel with clay LAPONITE® XLG and in situ polymerized poly(N,N-dimethylacrylamide). Before in situ polymerization, the thermogelling and shear thinning properties of the thermoresponsive hydrogel provides a system well-suited for extrusion-based 3D printing. After chemical curing of the 3D-printed constructs by free radical polymerization, the resulting interpenetrating polymer network hydrogel shows excellent mechanical strength with a high stretchability to a tensile strain at break exceeding 550%. Integrating with the advanced 3D-printing technique, the introduced material could be interesting for a wide range of applications including tissue engineering, drug delivery, soft robotics and additive manufacturing in general.

Working Memory as an Indicator for Comparative Cognition - Detecting Qualitative and Quantitative Differences.

Working memory (WM), the representation of information held accessible for manipulation over time, is an essential component of all higher cognitive abilities. It allows for complex behaviors that go beyond simple stimulus-response associations and inflexible behavioral patterns. WM capacity determines how many different pieces of information (items) can be used for these cognitive processes, and in humans, it correlates with fluid intelligence. As such, WM might be a useful tool for comparison of cognition across species. WM can be tested using comparatively simple behavioral protocols, based on operant conditioning, in a multitude of different species. Species-specific contextual variables that influence an animal's performance on a non-cognitive level are controlled by adapting the WM paradigm. The neuronal mechanisms by which WM emerges in the brain, as sustained neuronal activity, are comparable between the different species studied (mammals and birds), as are the areas of the brain in which WM activity can be measured. Thus WM is comparable between vastly different species within their respective niches, accounting for specific contextual variables and unique adaptations. By approaching the question of "general cognitive abilities" or "intelligence" within the animal kingdom from the perspective of WM, the complexity of the core question at hand is reduced to a fundamental memory system required to allow for complex cognitive abilities. This article argues that measuring WM can be a suitable addition to the toolkit of comparative cognition. By measuring WM on a behavioral level and going beyond behavior to the underlying physiological processes, qualitative and quantitative differences in cognition between different animal species can be identified, free of contextual restraints.

Inverse Thermogelation of Aqueous Triblock Copolymer Solutions into Macroporous Shear-Thinning 3D Printable Inks.

Amphiphilic block copolymers that undergo (reversible) physical gelation in aqueous media are of great interest in different areas including drug delivery, tissue engineering, regenerative medicine, and biofabrication. We investigated a small library of ABA-type triblock copolymers comprising poly(2-methyl-2-oxazoline) as the hydrophilic shell A and different aromatic poly(2-oxazoline)s and poly(2-oxazine)s cores B in an aqueous solution at different concentrations and temperatures. Interestingly, aqueous solutions of poly(2-methyl-2-oxazoline)-block-poly(2-phenyl-2-oxazine)-block-poly(2-methyl-2-oxazoline) (PMeOx-b-PPheOzi-b-PMeOx) undergo inverse thermogelation below a critical temperature by forming a reversible nanoscale wormlike network. The viscoelastic properties of the resulting gel can be conveniently tailored by the concentration and the polymer composition. Storage moduli of up to 110 kPa could be obtained while the material retains shear-thinning and rapid self-healing properties. We demonstrate three-dimensional (3D) printing of excellently defined and shape-persistent 24-layered scaffolds at different aqueous concentrations to highlight its application potential, e.g., in the research area of biofabrication. A macroporous microstructure, which is stable throughout the printing process, could be confirmed via cryo-scanning electron microscopy (SEM) analysis. The absence of cytotoxicity even at very high concentrations opens a wide range of different applications for this first-in-class material in the field of biomaterials.