Long-term missing role of small colloids and nanoparticles on the loading and speciation of phosphorus in catfish aquaculture ponds in west Alabama.

Increasing loading of phosphorus (P) into freshwater systems is deemed as one of the key drivers triggering harmful algal blooms (HABs). However, conventional water quality monitoring of P normally uses the operational cutoff (e.g., 450-nm filter membrane) to separate particulate and dissolved phases (entities passing through the 450-nm membrane are regarded as dissolved phase), which completely neglects the roles of small colloids (450-100 nm) and nanoparticles (100-1 nm). Herein, a new particle size separation approach was used to separate water samples collected from catfish aquaculture ponds in west Alabama into six size fractions: large particles (>1000 nm), large colloids (1000-450 nm), small colloids (450-100 nm), large nanoparticles (100-50 nm), small nanoparticles (50-1 nm), and the truly dissolved phase (<1 nm). The speciation and concentration of P in these six size fractions were then investigated using Hedley's sequential extraction method. The new particle size separation results showed that particle loading (mass) followed the order: >1000 nm, 450-100 nm, 1000-450 nm, 100-50 nm, and 50-1 nm. This is mainly due to the abundance of large-sized (>1000 nm) zooplankton and phytoplankton such as algae and cyanobacteria in the catfish aquaculture ponds. Importantly, the small colloid (450-100 nm) and nanoparticle (100-1 nm) size fractions, which were previously regarded as the dissolved phase using the 450-nm membrane filtration operation, accounted for ∼41.8% of the total particle mass. The Hedley's sequential extraction results showed that sodium hydroxide (NaOH)-extracted P represented the largest P pool, followed by water (H2O)- and sodium bicarbonate (NaHCO3)-extracted P pools. Smaller particles exhibited a higher loading of P due to their large surface areas. These new findings suggest that the new particle size separation approach needs to be adopted for future water quality monitoring and mitigation of HABs in freshwater ecosystems.

Sorptive removal of phosphorus by flue gas desulfurization gypsum in batch and column systems.

Phosphorus (P) over-loading is often a central topic due to its linkage to harmful algal blooms (HABs) and its importance in wastewater treatment that has fueled immediate remediation attempts to reduce P loading from point (e.g., wastewater) and nonpoint sources (e.g., fertilizers). Conventional remediation techniques (e.g., filtration) are often expensive, ineffective, and difficult to implement at large scales. The flue gas desulfurization (FGD) gypsum produced as an energy plant waste byproduct has recently been advocated as a physiochemical remediation strategy for P through sorptive removal. However, limited research is available on the practical applications of FGD gypsum for P removal from water. Herein, batch sorption experiments were performed to investigate the sorptive removal efficiency of P by FGD gypsum under environmentally relevant P concentrations (0.01-0.25 mM). In parallel, fixed-bed column experiments packed with FGD gypsum were performed using elevated P concentrations (0.1-1.0 mM) to understand the scalability of FGD gypsum for large-scale practical applications. During batch experiments, P sorption equilibrium was reached within 24 h that includes an initially fast step (via boundary layer diffusion), followed by a slow rate-determining step (via intraparticle diffusion). P sorption kinetics followed the pseudo second-order kinetics, indicating chemisorption. P sorption at equilibrium can be simulated by both the Freundlich and Langmuir sorption isotherms. The Langmuir sorption isotherm yielded a maximum sorption capacity (Qmax) of 36.1 mM kg-1. The fixed-bed column experimental results showed that sorption rate depends on the applied flow rate, irrespective of the tested P concentrations. Our findings can be extrapolated to evaluate the feasibility and scalability of FGD gypsum in removing P to counteract P runoff and mitigate HABs and P-loaded wastewater.

Critical review of microplastics removal from the environment.

Globally, microplastics pollution has become a serious environmental threat due to their multitude sources, widespread occurrence, persistence, and adverse effects to ecosystem and the human health. Addressing this multifaceted threat requires innovative technologies that can efficiently remove microplastics from the environment. In this review, we first overviewed the source, occurrence, and potential adverse impacts of microplastics to human health. We then identified promising technologies for microplastics removal, including physical, chemical, and biological approaches. A detailed analysis of the advantages and limitations of different techniques was provided. We concluded this review with the current challenges and future research priorities, which will guide us through the path addressing microplastics contamination.

Filter-feeders have differential bottom-up impacts on green and brown food webs.

Nutrient recycling by consumers can strongly impact nutrient availability for autotrophic and heterotrophic microbes, thus impacting functions such as primary production and decomposition. Filter-feeding freshwater mussels form dense, multispecies assemblages in aquatic ecosystems and have been shown to play a critical role in nutrient cycling. Mussel excretion can enhance benthic primary production and influence algal species composition. However, the role of mussels in brown or detritus-based food webs and species-specific differences has received considerably less attention. Here, using mesocosm experiments, we assessed how three species of freshwater mussels that occupy three different phylogenetic tribes influenced benthic algal accrual, ecosystem metabolism, cotton strip decomposition, leaf litter (Acer saccharum) decomposition, and litter-associated fungal biomass measured as ergosterol. Additionally, we measured mussel excretion and biodeposition rates and assessed the stoichiometry (C:N, C:P, and N:P) of the benthic algae, cotton strips, and leaf litter. In comparison to controls without mussels, generally, mussel treatments had higher benthic algal biomass composed of more diatoms, higher gross primary productivity and net ecosystem production rates, and higher cotton strip tensile strength loss, but there was not a difference in ecosystem respiration rates, leaf litter decomposition rates, or fungal biomass. Benthic algae had lower C:N and higher N:P in mussel treatment tanks and cotton strip C:N was lower in mesocosms with mussels. Our results suggest that nutrient regeneration by mussels most strongly regulates green food webs, with some impacts to brown food webs, suggesting that consumers have interactive effects on microbial functioning in freshwaters.

Personal Safety in Dangerous Places.

Personal safety during fieldwork is seldom addressed directly in the literature. Drawing from many prior years of ethnographic research and from field experience while studying crack distributors in New York City, the authors provide a variety of strategies by which ethnographic research can be safely conducted in dangerous settings. By projecting an appropriate demeanor, ethnographers can seek others for protector and locator roles, routinely create a safety zone in the field, and establish compatible field roles with potential subjects. The article also provides strategies for avoiding or handling sexual approaches, common law crimes, fights, drive-by shootings, and contacts with the police. When integrated with other standard qualitative methods, ethnographic strategies help to ensure that no physical harm comes to the field-worker and other staff members. Moreover, the presence of researchers may actually reduce (and not increase) potential and actual violence among crack distributors/abusers or others present in the field setting.