Methods for Small-Angle Scattering Measurements on Peptiplexes of DNA with Cell-Penetrating Peptides.

Peptiplexes are soft biomaterials formed through the noncovalent association between cell-penetrating peptides and nucleic acids. Although internalization often involves electrostatic anchoring followed by endocytosis, the mode of action of these transporters remains elusive in many cases, and proper understanding of mechanisms behind their penetrating capabilities necessarily entails structural data at the nanoscopic scale. In this chapter, we examine the structural landscape of peptiplexes, emphasizing the complex behavior of these polyelectrolyte self-assemblies and how supramolecular order impacts their translocation efficiency. We discuss experimental tools commonly used to investigate the structure of peptiplexes and pay special attention to small-angle X-ray scattering (SAXS) as a suitable method for unveiling their nanoscale organization. A roadmap for standard SAXS measurements in CPP/DNA samples is presented alongside a selection of observations from our own experience dealing with SAXS applied to the investigation of CPPs.

Nanoscopic Structure of Complexes Formed between DNA and the Cell-Penetrating Peptide Penetratin.

One of the most remarkable examples of cell-penetrating peptides (CPPs) is Penetratin, a 16-mer fragment derived from the Drosophila Antennapedia homeobox. Understanding the structure of Penetratin/DNA complexes is a key factor for the successful design of new vectors for gene delivery and may assist in optimizing molecular carriers based on CPPs. Herein, we present a comprehensive study on the nanoscale structure of noncovalent complexes formed between Penetratin and DNA. The strong cationic nature of the peptide makes it a very efficient agent for condensing DNA strands via electrostatic attraction, and we show for the first time that DNA condensation is accompanied by random-to-ß-sheet transitions of Penetratin secondary structure, demonstrating that nucleic acids behave as a structuring agent upon complexation. For the first time, nanoscale-resolved spectroscopy is used to provide single-particle infrared data from DNA carriers based on CPPs, and they show that the structures are stabilized by Penetratin ß-sheet cores, whereas larger DNA fractions are preferentially located in the periphery of aggregates. In-solution infrared assays indicate that phosphate diester groups are strongly affected upon DNA condensation, presumably as a consequence of charge delocalization induced by the proximity of cationic amide groups in Penetratin. The morphology is characterized by nanoassemblies with surface fractal features, and short-range order is found in the inner structure of the scaffolds. Interestingly, the formation of beads-on-a-string arrays is found, producing nanoscale architectures that resemble structures observed in early steps of chromatin condensation. A complexation pathway where DNA condensation and peptide pairing into ß-sheets are key steps for organization is proposed.

Tuning Ordered Pattern of Pd Species through Controlled Block Copolymer Self-Assembly.

We report a method for the preparation of ordered patterns of Pd species on a substrate based on the use of polystyrene-block-poly(ethylene oxide) copolymer (PS-b-PEO) templates and selective inclusion of palladium (Pd) species in the PEO domains. PS-b-PEO samples of different total molecular masses self-assemble in a cylindrical microphase-separated morphology, in which vertically aligned PEO cylinders, with different diameters depending on the molecular mass, are organized in a hexagonal array of different lateral spacings. The cylindrical nanostructure is maintained after the selective inclusion of Pd species (Pd acetate and Pd nanoparticles (NPs) after reduction of Pd ions of the salt) in the PEO cylinders so that the characteristic sizes (diameters and lateral spacings) of the included Pd species are tuned by the characteristic sizes of the block copolymer (BCP) template, which are regulated by molecular mass. Treatment of nanocomposites at elevated temperatures in air removes the polymer matrix and leads to the formation of arrays of palladium oxide (PdO) NPs covering a solid support. The patterns of PdO NPs are characterized by different particle diameters and gap distances, mirroring the patterns and characteristic nanodimensions of the parent BCPs used as templates.

Self-Assembly of the Cyclic Lipopeptide Daptomycin: Spherical Micelle Formation Does Not Depend on the Presence of Calcium Chloride.

The cyclic lipopeptide Daptomycin, used as a treatment for infections where antimicrobial resistance is observed, is shown to self-assemble into spherical micelles above a critical aggregation concentration. Micelles are observed either in the absence or presence of CaCl2 , in contrast to claims in the literature that CaCl2 is required for micellization.

Self-Assembly of Telechelic Tyrosine End-Capped PEO and Poly(alanine) Polymers in Aqueous Solution.

The self-assembly in aqueous solution of three novel telechelic conjugates comprising a central hydrophilic polymer and short (trimeric or pentameric) tyrosine end-caps has been investigated. Two of the conjugates have a central poly(oxyethylene) (polyethylene oxide, PEO) central block with different molar masses. The other conjugate has a central poly(L-alanine) (PAla) sequence in a purely amino-acid based conjugate. All three conjugates self-assemble into ß-sheet based fibrillar structures, although the fibrillar morphology revealed by cryogenic-TEM is distinct for the three polymers--in particular the Tyr5-PEO6k-Tyr5 forms a population of short straight fibrils in contrast to the more diffuse fibril aggregates observed for Tyr5-PEO2k-Tyr5 and Tyr3-PAla-Tyr3. Hydrogel formation was not observed for these samples (in contrast to prior work on related systems) up to quite high concentrations, showing that it is possible to prepare solutions of peptide-polymer-peptide conjugates with hydrophobic end-caps without conformational constraints associated with hydrogelation. The Tyr5-PEO6k-Tyr5 shows significant PEO crystallization upon drying in contrast to the Tyr5-PEO2k-Tyr5 conjugate. Our findings point to the remarkable ability of short hydrophobic peptide end groups to modulate the self-assembly properties of polymers in solution in model peptide-capped "associative polymers". Retention of fluidity at high conjugate concentration may be valuable in potential future applications of these conjugates as bioresponsive or biocompatible materials, for example exploiting the enzyme-responsiveness of the tyrosine end-groups.

Correction: Self-assembly of the anti-fungal polyene amphotericin B into giant helically-twisted nanotapes.

Correction for 'Self-assembly of the anti-fungal polyene amphotericin B into giant helically-twisted nanotapes' by Ian William Hamley et al., Chem. Commun., 2015, 51, 17680-17683.

Self-assembly of the anti-fungal polyene amphotericin B into giant helically-twisted nanotapes.

The amphiphilic polyene amphotericin B, a powerful treatment for systemic fungal infections, is shown to exhibit a critical aggregation concentration, and to form giant helically-twisted nanostructures via self-assembly in basic aqueous solution.

Self-Assembled Arginine-Capped Peptide Bolaamphiphile Nanosheets for Cell Culture and Controlled Wettability Surfaces.

The spontaneous assembly of a peptide bolaamphiphile in water, namely, RFL4FR (R, arginine; F, phenylalanine; L, leucine) is investigated, along with its novel properties in surface modification and usage as substrates for cell culture. RFL4FR self-assembles into nanosheets through lateral association of the peptide backbone. The L4 sequence is located within the core of the nanosheets, whereas the R moieties are exposed to the water at the surface of the nanosheets. Kinetic assays indicate that the self-assembly is driven by a remarkable two-step process, where a nucleation phase is followed by fast growth of nanosheets with an autocatalysis process. The internal structure of the nanosheets is formed from ultrathin bolaamphiphile monolayers with a crystalline orthorhombic symmetry with cross-ß organization. We show that human corneal stromal fibroblast (hCSF) cells can grow on polystyrene films coated with films dried from RFL4FR solutions. For the first time, this type of amphiphilic peptide is used as a substrate to modulate the wettability of solid surfaces for cell culture applications.

Self-assembly pathway of peptide nanotubes formed by a glutamatic acid-based bolaamphiphile.

The self-assembly of peptide nanotubes formed by an L-glutamic acid-based bolaamphiphile is shown to proceed via a remarkable mechanism where the peptide conformation changes from ß-sheet to unordered. The kinetics of this process are elucidated via X-ray scattering and UV circular dichroism methods. The reverse transition from "unordered" to ß-sheet structures is triggered by UV radiation.

Tissue engineering a fetal membrane.

The aim of this study was to construct an artificial fetal membrane (FM) by combination of human amniotic epithelial stem cells (hAESCs) and a mechanically enhanced collagen scaffold containing encapsulated human amniotic stromal fibroblasts (hASFs). Such a tissue-engineered FM may have the potential to plug structural defects in the amniotic sac after antenatal interventions, or to prevent preterm premature rupture of the FM. The hAESCs and hASFs were isolated from human fetal amniotic membrane (AM). Magnetic cell sorting was used to enrich the hAESCs by positive ATP-binding cassette G2 selection. We investigated the use of a laminin/fibronectin (1:1)-coated compressed collagen gel as a novel scaffold to support the growth of hAESCs. A type I collagen gel was dehydrated to form a material mimicking the mechanical properties and ultra-structure of human AM. hAESCs successfully adhered to and formed a monolayer upon the biomimetic collagen scaffold. The resulting artificial membrane shared a high degree of similarity in cell morphology, protein expression profiles, and structure to normal fetal AM. This study provides the first line of evidence that a compacted collagen gel containing hASFs could adequately support hAESCs adhesion and differentiation to a degree that is comparable to the normal human fetal AM in terms of structure and maintenance of cell phenotype.

Photochemical cross-linking of plastically compressed collagen gel produces an optimal scaffold for corneal tissue engineering.

The experiments were designed to use photochemically cross-linked plastically compressed collagen (PCPCC) gel to support corneal epithelial cells. A plastically compressed collagen (PCC) scaffold was photo cross-linked by UVA in the presence of riboflavin to form a biomaterial with optimal mechanical properties. The breaking force, rheology, surgical suture strength, transparency, ultrastructure, and cell-based biocompatibility were compared between PCPCC and PCC gels. The breaking force increased proportionally with an increased concentration of riboflavin. The stress required to reach breaking point of the PCPCC scaffolds was over two times higher compared to the stress necessary to break PCC scaffolds in the presence of 0.1% riboflavin. Rheology results indicated that the structural properties of PCC remain unaltered after UVA cross-linking. The PCC gels were more easily broken than PCPCC gels when sutured on to bovine corneas. The optical density values of PCPCC and PCC showed no significant differences (p > 0.05). SEM analyses showed that the collagen fibres within the PCPCC gels were similar in morphology to PCC gels. No difference in cell-based biocompatibility was seen between the PCPCC and PCC scaffolds in terms of their ability to support the ex vivo expansion of corneal epithelial cells or their subsequent differentiation evidenced by similar levels of cytokeratin 14. In conclusion, PCPCC scaffold is an optimal biomaterial for use in therapeutic tissue engineering of the cornea.