Randomized controlled multi-centre study comparing shorter dental implants (6 mm) to longer dental implants (11-15 mm) in combination with sinus floor elevation procedures: 10-year data.

AIM: To compare implant survival and complication rates between shorter and standard-length implants with sinus augmentation and restored with single crowns, at 10 years of loading. MATERIALS AND METHODS: One-hundred and one patients (137 implants) with a ridge height of 5-7 mm in the posterior maxilla were randomly assigned to two treatment modalities: shorter implants (6 mm) (group short [GS]) or standard-length implants (11-15 mm) with sinus grafting (group graft [GG]). Following the insertion of final restorations, patients were regularly recalled for up to 10 years. Assessed outcomes encompassed implant survival, marginal bone levels (MBLs), biological and technical parameters and patient-reported outcome measures (OHIP-49 = Oral Health Impact Profile). Non-parametric statistical analysis was used to analyse the data. RESULTS: For the 5- to 10-year follow-up period, 77 patients with 105 implants (GS: 36 patients/48 implants; GG: 41/57) were available for re-examination (drop-out rate 21%). Implant survival rates at the patient level were 96.0% (GS; 2 failures) and 100% (GG) (inter-group p = .24). Median MBLs amounted to 0.00 mm (min 0.00; max 3.25; GS) and 0.00 mm (min 0.00; max 4.55; GG) (inter-group p = .73). Technical complications predominantly occurred within the first 5 years (inter-group p > .05). Peri-implantitis rates were 4.2% (GS) and 13.3% (GG) (intergroup p = .37). Median OHIP-49 scores were 7.00 (0.00; 39.00; GS) and 9.00 (0.00; 196; GG) (inter-group p = .61) at 10 years. CONCLUSIONS: Based on similar 10-year implant survival rates, reduced patient morbidity and lower costs, the use of shorter dental implants might well serve as an alternative treatment concept to longer implants placed in conjunction with sinus grafting for patients with a limited ridge height in the posterior maxilla. Study register: https://clinicaltrials.gov/ct2/show/NCT01030523.

Clinical outcomes following atrophic alveolar ridge reconstruction using collagenated xenogeneic bone block or autogenous bone block: One-year follow-up of a randomized controlled clinical.

AIM: This investigation aimed to evaluate the 1-year survival of implants placed after staged lateral alveolar ridge augmentation using equine-derived collagenated xenogeneic bone blocks (CXBBs) or autogenous bone block (ABB). MATERIALS AND METHODS: Fifty patients who underwent lateral augmentation in a previous trial were included. The primary outcome measure was implant survival at the 1-year follow-up, and secondary outcomes included implant success, peri-implant clinical and volumetric parameters, pink aesthetic scores (PES) and patient-reported outcome measures. Data analysis involved Fisher's exact test, the Mann-Whitney U-test and the Wilcoxon signed-rank test. RESULTS: In this study, no late implant failures were observed. The cumulative survival rates were 78.6% for the CXBB group and 90.9% for the ABB group, with no difference between the groups. Similarly, the success rates were 53.6% and 63.6%, respectively, showing no significant difference. Peri-implant clinical and volumetric parameters indicated the presence of healthy peri-implant tissues surrounding implants placed in both CXBB- and ABB-augmented sites. PES were 8.5 and 11.0 for implants placed in CXBB- and ABB-augmented sites, respectively. Furthermore, patient satisfaction rates were high and similar between the groups. CONCLUSIONS: Dental implants placed in both CXBB- and ABB-augmented ridges demonstrated no statistically significant differences in clinical, volumetric and aesthetic outcomes, along with high patient satisfaction rates.

Clinical Outcomes of Tooth- and Implant-Supported Restorations Performed in a University-based Undergraduate Program after 13-15 Years.

AIMS: To assess the clinical concept of patient treatment with fixed tooth- and implant-supported restorations in a university-based undergraduate program after 13 - 15 years. METHODS: Thirty patients (mean age 56 years) who had received multiple tooth- and implant-supported restorations were recalled after 13-15 years. The clinical assessment comprised of biological and technical parameters as well as patient satisfaction. Data were analyzed descriptively and the 13-15-year survival rates for tooth- and implant-supported single crowns and fixed dental prostheses were calculated. RESULTS: The survival rate of tooth-supported restorations amounted to 88.3% (single crowns) and 69.6% (fixed dental prostheses); in implants it reached 100% for all types of reconstructions. Overall, 92.4% of all reconstructions were free of technical complications. The most common technical complication was chipping of the veneering ceramic (tooth-supported restorations: 5.5%; implant-supported restorations: 13-15.9%) regardless of the material used. At teeth, increased probing depth ≥5mm was the most frequent biological complication (22.8%), followed by endodontic complications of root-canal treated teeth (14%) and loss of vitality at abutment teeth (8.2%). Peri-implantitis was diagnosed in 10.2% of implants. CONCLUSION: Results of this study indicate that the clinical concept implemented in the undergraduate program and performed by undergraduate students works well. The clinical outcomes are similar to those reported in the literature. In general, the majority of biological complications occurrs in reconstructed teeth, whereas implant-supported restorations are more prone to technical complications.

Comparative Evaluation of Marginal Bone Levels, ISQ Trends, and Implant Survival Rates Between Conventional Drilling and Osteotome Technique Using Implants of Varied Lengths: A Split-Mouth Randomized Controlled Clinical Trial.

PURPOSE: To assess marginal bone loss (MBL) and implant stability when implant site preparation is performed with conventional drilling and the osteotome technique in the posterior maxilla. MATERIALS AND METHODS: In total, 30 patients (mean age: 46.97 + 7.48 years) receiving 60 implants were enrolled in this study. In each patient, implant site preparation was done using either conventional drilling (conventional group; n = 30) or the osteotome technique (osteotome group; n = 30). The implant sites were further divided into groups based on the implant length used (implant length < 10 mm, implant length ≥ 10 mm). Marginal bone levels and implant stability quotient (ISQ) values were evaluated at the time of crown insertion and 1 year later. Independent t test and paired t test were used for intergroup and intragroup comparison, respectively. RESULTS: The osteotome group showed statistically significant higher initial ISQ (ISQi) and final ISQ (ISQf) values (ISQi: 61 ± 3.6; ISQf: 64.08 ± 3.7) compared to the conventional group (ISQi: 58.01 ± 4.6; ISQf: 61.32 ± 4.8). Statistically significant higher mean MBL was noted in the conventional group (-0.33 ± 0.12 mm) compared to the osteotome group (-0.26 ± 0.10 mm). Higher MBL was noted in the osteotome group (-0.32 ± 0.09 mm) compared to the conventional group (-0.30 ± 0.14 mm) for implants shorter than 10 mm. For implants ≥ 10 mm in length, significantly higher MBL was noted in the conventional group (-0.37 ± 0.09 mm) compared to the osteotome group (-0.19 ± .06 mm). CONCLUSIONS: Osteotome technique could be used as an alternative to conventional drilling, especially when implants longer than 10 mm are planned in the posterior maxilla.

Efficacy of a collagen matrix for soft tissue augmentation after implant placement compared to connective tissue grafts: A multicenter, noninferiority, randomized controlled trial.

OBJECTIVES: To test whether soft tissue volume augmentation using a collagen matrix (VCMX) leads to noninferior results in terms of gain of mucosal thickness at single implant sites, compared to connective tissue grafts (SCTG). METHODS: The study was designed as a multi-center randomized controlled clinical trial. Subjects in need of soft tissue volume augmentation at single tooth implant sites were consecutively recruited at nine centers. The deficient mucosal thickness at the implant sites (one per patient) was augmented by applying either a VCMX or a SCTG. Patients were examined at 120 days (abutment connection = primary endpoint), 180 days (final restoration), and 360 days (1-year after insertion of the final restoration). Outcome measures included: transmucosal probing of the mucosal thickness (crestal = primary outcome), profilometric measurements of the tissue volume, and patient-reported outcome measures (PROMs). RESULTS: Out of the 88 patients, 79 attended the one-year follow-up. The median increase of the crestal mucosal thickness between pre-augmentation and 120 days was 0.3 ± 2.1 mm in the VCMX group and 0.8 ± 1.6 mm in the SCTG group (p = .455). Non-inferiority of the VCMX compared to the SCTG was not observed. The respective numbers at the buccal aspect amounted to 0.9 ± 2.0 mm (VCMX) and 1.1 ± 1.4 mm (SCTG; p = .431). PROMs including pain perception favored the VCMX group. CONCLUSION: It remains inconclusive whether soft tissue augmentation using a VCMX is noninferior to SCTG in terms of crestal mucosal thickening at single implant sites. However, the use of collagen matrices favors PROMs especially pain perception, while achieving similar buccal volume gains along with comparable clinical and aesthetic parameters to SCTG.

Early implant placement in sites with ridge preservation or spontaneous healing: histologic, profilometric, and CBCT analyses of an exploratory RCT.

PURPOSE: The aim of this study was to compare changes in soft and hard tissue and the histologic composition following early implant placement in sites with alveolar ridge preservation or spontaneous healing (SH), as well as implant performance up to 1 year after crown insertion. METHODS: Thirty-five patients with either intact buccal bone plates or dehiscence of up to 50% following single-tooth extraction of incisors, canines, or premolars were included in the study. They were randomly assigned to undergo one of three procedures: deproteinized bovine bone mineral with 10% collagen (DBBM-C) covered by a collagen matrix (DBBM-C/CM), DBBM-C alone, or SH. At 8 weeks, implant placement was carried out, and cone-beam computed tomography scans and impressions were obtained for profilometric analysis. Patients were followed up after the final crown insertion and again at 1 year post-procedure. RESULTS: Within the first 8 weeks following tooth extraction, the median height of the buccal soft tissue contour changed by -2.11 mm for the DBBM-C/CM group, -1.62 mm for the DBBM-C group, and -1.93 mm for the SH group. The corresponding height of the buccal mineralized tissue changed by -0.27 mm for the DBBM-C/CM group, -2.73 mm for the DBBM-C group, and -1.48mm for the SH group. The median contour changes between crown insertion and 1 year were -0.19 mm in the DBBM-C/CM group, -0.09 mm in the DBBM-C group, and -0.29 mm in the SH group. CONCLUSIONS: Major vertical and horizontal ridge contour changes occurred, irrespective of the treatment modality, up to 8 weeks following tooth extraction. The DBBM-C/CM preserved more mineralized tissue throughout this period, despite a substantial reduction in the overall contour. All 3 protocols led to stable tissues for up to 1 year.

Radiographic outcomes of ridge reconstruction with autogenous bone block versus collagenated xenogeneic bone block: A randomized clinical trial.

AIM: To compare, at different levels from the alveolar crest, the radiographic outcomes of equine-derived collagenated xenogeneic bone blocks (CXBB) and autogenous bone blocks (ABB) used for lateral alveolar ridge augmentation. MATERIALS AND METHODS: Sixty-four patients with tooth gaps in atrophic alveolar ridges with ≤4 mm were randomly assigned to lateral augmentation using CXBB or ABB. The lateral bone thickness (LBT) was measured 2, 4, 6, 8, and 10 mm below the alveolar crest using CBCT scans obtained before augmentation surgery and at 30 weeks, prior to implant placement. Statistical analysis was performed using Shapiro-Wilk, Fisher's exact, Mann-Whitney, and Wilcoxon signed-rank tests. RESULTS: Both CXBB and ABB resulted in significant total and buccal LBT gains at 2, 4, 6, 8, and 10 mm. LBT gains were similar between CXBB- and ABB-augmented sites, except for greater buccal LBT gains at 8 mm at CXBB-augmented sites. While ABB-augmented sites gained vertical bone height, CXBB-treated sites suffered vertical bone loss (CXBB: -0.16 mm; ABB: 0.38 mm, p < .0009). CONCLUSIONS: CXBB and ABB were both associated with significant and similar LBT gains at 30 weeks.

13-year follow-up of a randomized controlled study on zirconia and titanium abutments.

OBJECTIVES: To assess survival rates and compare technical, biological, and esthetic outcomes of customized zirconia and titanium abutments at 13 years post loading. MATERIALS AND METHODS: Initially, 22 patients with 40 implants in posterior regions were included. The sites were randomly assigned to 20 customized zirconia abutments with cemented all ceramic crowns (ACC) and 20 customized titanium abutments with cemented metal ceramic crowns (MCC). At a mean follow-up of 13.4 years, patients were examined and implants/restorations assessed for survival and technical complications, as well as biological and esthetic outcomes (pocket probing depth [PPD], bleeding on probing [BOP], plaque control record [PCR], bone level [BL], papilla index [PAP], mucosal thickness, and recession (distance of the margo mucosae [MM]/margo gingivae MG)). Descriptive analyses were performed for all outcome measures. RESULTS: Fifteen patients with 21 abutments (13 zirconia, 8 titanium) were examined at 13 years. The drop-out rate was 25% (patient level). The technical survival rate of the abutments was 100%. The survival rate on the restorative level (crowns) was 100%. The assessed biological outcomes (PPD, PCR, BOP, BL) and esthetic outcomes (MG, PAP) were similar. CONCLUSIONS: Zirconia and titanium abutments supporting single implant-borne restorations rendered a high survival rate and minimal differences in terms of technical, biological, and esthetic outcomes at 13 years of follow-up.

Strength of implant-supported lithium disilicate and polymer-infiltrated ceramic network restorations after thermomechanical aging.

AIM: To evaluate the fracture load and type of failure of two different monolithic restorative materials bonded to standardized titanium bases and fabricated by two different procedures regarding the bonding interface. MATERIALS AND METHODS: All screw-retained implant crown specimens (n = 40), subjected to fatigue by thermomechanical loading, differed in the restorative material (lithium disilicate [LDS] or polymer-infiltrated ceramic network [PICN], referred to as 'hybrid ceramic' [HYC]) and the interface type between the restorative material and the titanium base abutment (prefabricated ex-factory or produced during a CAM-milling procedure). This resulted in the following groups (n = 10/group): 1) LDS-M: lithium disilicate crown with a CAM-milled interface; 2) LDS-P: lithium disilicate crown with a prefabricated interface; 3) HYC-M: PICN crown with a CAM-milled interface; and 4) HYC-P: PICN crown with a prefabricated interface. Aged specimens underwent static fracture load testing. The load (N) at which the initial crack occurred was denoted as Finitial, and the maximal load (N) at which the restorations fractured as Fmax. All specimens were examined under a stereomicroscope to determine the failure mode. RESULTS: The median Finitial values were 180 N for LDS-M, 343 N for LDS-P, 340 N for HYC-M, and 190 N for HYC-P. The median Fmax values were 1822 N for LDS-M, 2039 N for LDS-P, 1454 N for HYC-M, and 1581 N for HYC-P. The intergroup differences were significant for Finitial (KW: P = 0.0042) and for Fmax (KW: P = 0.0010). The failure types also showed differences between the restorative groups. CONCLUSIONS: The choice of restorative material had a stronger influence on the fracture load than the abutment interface workflow. Lithium disilicate showed the highest load for initial crack appearance (Finitial) and for complete fracture of the restoration (Fmax).

Soft tissue augmentation with a volume-stable collagen matrix or an autogenous connective tissue graft at implant sites: Five-year results of a randomized controlled trial post implant loading.

BACKGROUND: Interventions to augment the mucosal thickness around dental implants are indicated to optimize esthetics and maintain peri-implant health. However, there is a lack of clinical data on the long-term performance of soft tissue substitutes, such as volume-stable collagen matrix (VCMX), compared to autogenous grafts, such as subepithelial connective tissue grafts (SCTGs). This randomized controlled trial aimed to assess 5-year data on clinical and radiographic outcomes at implant sites previously augmented with VCMX or SCTG. METHODS: Twenty patients were randomly assigned for soft tissue augmentation with VCMX or SCTG at single implant sites. Following abutment connection, final restorations were inserted (baseline; BL) and patients were reexamined up to 5 years (FU-5). Measurements included clinical data, marginal bone levels, mucosal thickness, and ridge contour changes. Nonparametric tests and estimates were applied for the statistical analysis. RESULTS: The median buccal mucosal thickness increased by 0.3 mm (Q1: -0.8; Q3: 1.0) in the VCMX group (P = 0.656) and 0.3 mm (Q1: 0.0; Q3: 1.0) in the SCTG group (P = 0.188) between BL and FU-5 (intergroup P = 0.752), while the ridge contour decreased by a median of -0.3 mm (-0.9; -0.1) (P = 0.078) for VCMX and -0.3 mm (-0.4; -0.2) (P = 0.039) for SCTG (intergroup P = 0.817). Peri-implant health was maintained in both groups with stable clinical and radiographic outcomes and without significant differences between the treatments. CONCLUSION: Despite the limited power and considerable dropout rate in the present study, soft tissue augmentation at implant sites with either VCMX or SCTG resulted in similar stable peri-implant tissues, favorable esthetics, and clinically negligible contour changes at 5 years post loading.

Soft-tissue dimensional change following guided bone regeneration on peri-implant defects using soft-type block or particulate bone substitutes: 1-year outcomes of a randomized controlled clinical trial.

AIM: To compare the peri-implant soft-tissue dimensional changes following guided bone regeneration between particulate (particle group) and collagenated soft-block-type (block group) biphasic calcium phosphate (BCP). MATERIALS AND METHODS: This study investigated 35 subjects: 18 in the particle group and 17 in the block group. Cone-beam computed tomography obtained at 6 months post surgery and optical impressions taken periodically (before surgery, 6 months post surgery, and 1 year post surgery) were superimposed. The ridge contour changes over time and the peri-implant mucosal thicknesses were measured diagonally and horizontally, and analysed statistically. RESULTS: The increases in diagonal (1.12 ± 0.78 mm) and horizontal (2.79 ± 1.90 mm) ridge contour of the block group were significantly higher than those in the particle group during the first 6 months (p < .05); however, the contour hardly changed thereafter (diagonal: 0.07 ± 0.75 mm; horizontal: -0.34 ± 1.26 mm), resulting in the 1-year contour changes similar between the two groups. Regardless of the type of BCP, the ridge contour increased significantly over 1 year when the dehiscence defect had a contained configuration (p < .05). CONCLUSIONS: The increase in soft-tissue dimensions for 1 year was similar between the two groups. The mucosal contour increase was larger when the surgery was conducted in a more contained defect, and this was not influenced by the type of BCP.

Evaluation of Oral Health-Related Quality of Life and Patient Satisfaction in Three-Implant-Retained Mandibular Overdentures: A Randomized Crossover Clinical Trial.

PURPOSE: To assess oral health-related quality of life (OHRQoL) and patient satisfaction with a three-implant-retained mandibular overdenture. MATERIALS AND METHODS: In this randomized crossover clinical trial, 20 edentulous patients received a new set of conventional complete dentures (CDs; baseline). Subsequently, three implants were placed in the anterior mandible: two were placed in the canine regions bilaterally and one in the midline. After successful osseointegration, CDs were attached to the implants using resilient attachments. The overdenture was retained either by three implants (test group) or two implants (control group). The sequence of treatment was randomized such that each patient experienced both treatment options for 6 months each. OHRQoL was assessed at baseline and after 6 months of function for each treatment option using the Oral Health Impact Profile (OHIP-14) and visual analog scale (VAS) scores. Statistical analyses were performed using Friedman and Wilcoxon signed rank tests. RESULTS: CD resulted in significantly higher OHIP-14 and VAS scores (25.25 + 6.42, 8.55 + 1.73) compared to both the control group (11.15 + 5.39, 4 + 2; P < .001) and the test group (6.25 + 4.02, 2.06 + 1.48; P < .001). Similarly, significantly higher mean OHIP-14 and VAS scores were noted for the control group compared to the test group (P < .001). CONCLUSIONS: Overdentures retained by three implants resulted in better OHRQoL scores and higher patient satisfaction compared to overdentures retained by two implants and CDs. Int J Prosthodont 2023;36:554-56.

Minimal invasiveness at dental implant placement: A systematic review with meta-analyses on flapless fully guided surgery.

Flapless and fully guided implant placement has the potential to maximize efficacy outcomes and at the same time to minimize surgical invasiveness. The aim of the current systematic review was to answer the following PICO question: "In adult human subjects undergoing dental implant placement (P), is minimally invasive flapless computer-aided fully guided (either dynamic or static computer-aided implant placement (sCAIP)) (I) superior to flapped conventional (free-handed implant placement (FHIP) or cast-based/drill partially guided implant placement (dPGIP)) surgery (C), in terms of efficacy, patient morbidity, long-term prognosis, and costs (O)?" Randomized clinical trials (RCTs) fulfilling specific inclusion criteria established to answer the PICO question were included. Two review authors independently searched for eligible studies, screened the titles and abstracts, performed full-text analysis, extracted the data from the published reports, and performed the risk of bias assessment. In cases of disagreement, a third review author took the final decision during ad hoc consensus meetings. The study results were summarized using random effects meta-analyses, which were based (wherever possible) on individual patient data (IPD). A total of 10 manuscripts reporting on five RCTs, involving a total of 124 participants and 449 implants, and comparing flapless sCAIP with flapped FHIP/cast-based partially guided implant placement (cPGIP), were included. There was no RCT analyzing flapless dynamic computer-aided implant placement (dCAIP) or flapped dPGIP. Intergroup meta-analyses indicated less depth deviation (difference in means (MD) = -0.28 mm; 95% confidence interval (CI): -0.59 to 0.03; moderate certainty), angular deviation (MD = -3.88 degrees; 95% CI: -7.00 to -0.77; high certainty), coronal (MD = -0.6 mm; 95% CI: -1.21 to 0.01; low certainty) and apical (MD = -0.75 mm; 95% CI: -1.43 to -0.07; moderate certainty) three-dimensional bodily deviations, postoperative pain (MD = -17.09 mm on the visual analogue scale (VAS); 95% CI: -33.38 to -0.80; low certainty), postoperative swelling (MD = -6.59 mm on the VAS; 95% CI: -19.03 to 5.85; very low certainty), intraoperative discomfort (MD = -9.36 mm on the VAS; 95% CI: -17.10 to -1.61) and surgery duration (MD = -24.28 minutes; 95% CI: -28.62 to -19.95) in flapless sCAIP than in flapped FHIP/cPGIP. Despite being more accurate than flapped FHIP/cPGIP, flapless sCAIP still resulted in deviations with respect to the planned position (intragroup meta-analytic means: 0.76 mm in depth, 2.57 degrees in angular, 1.43 mm in coronal, and 1.68 in apical three-dimensional bodily position). Moreover, flapless sCAIP presented a 12% group-specific intraoperative complication rate, resulting in an inability to place the implant with this protocol in 7% of cases. Evidence regarding more clinically relevant outcomes of efficacy (implant survival and success, prosthetically and biologically correct positioning), long-term prognosis, and costs, is currently scarce. When the objective is to guarantee minimal invasiveness at implant placement, clinicians could consider the use of flapless sCAIP. A proper case selection and consideration of a safety margin are, however, suggested.

Randomized controlled pilot study assessing efficacy, efficiency, and patient-reported outcomes measures of chairside and labside single-tooth restorations.

OBJECTIVES: To test whether or not a chairside workflow (CHAIR) is similar to a labside workflow (LAB) in terms of efficacy (primary outcome) and efficiency (secondary outcome). MATERIAL AND METHODS: Eighteen subjects in need of a single-tooth restoration in the posterior region of the maxilla or mandible were consecutively recruited and randomly assigned to the CHAIR or LAB workflow. Patient-reported outcome measures (PROMs; efficacy) were assessed using a questionnaire with visual analog scale. The white AEsthetic score (WES) was applied to evaluate the AEsthetic outcome objectively. The clinical and laboratory time (efficiency) were recorded. Nonparametric methods were applied for the group comparisons. RESULTS: The overall median AEsthetic evaluation after treatment was 10 (interquartile range = IQR: 9.5-10) in group CHAIR and 10 (IQR: 9.5-10) in-group LAB (Mann-Whitney [MW] test p = 1.000). The WES amounted to 4 (IQR: 3-5) (CHAIR) and to 8 (IQR: 7-9) (LAB) (MW test p < 0.0001). The median total working time for the clinician in-group CHAIR was 49.9 min. (IQR: 40.9-63.7) and 41.4 min. (IQR: 37.2-58.2) in-group LAB (MW test p = 0.387). CONCLUSIONS: Subjective PROMs of single-tooth supported restorations fabricated in a CHAIR or LAB workflow led to similar scores of patients' satisfaction and a moderate negative correlation for the objective evaluation of the clinician in the LAB workflow. CLINICAL SIGNIFICANCE: PROMs can be considered a key element in the decision-making process for restoring single-tooth restorations. The patients' perception of AEsthetics was similar for the CHAIR or LAB workflows. The additional efforts undertaken with the LAB workflow did not result in a patient benefit when compared to a CHAIR workflow.

Tissue integration and biodegradation of soft tissue substitutes with and without compression: an experimental study in the rat.

OBJECTIVES: To analyze the influence of compression on tissue integration and degradation of soft tissue substitutes. MATERIAL AND METHODS: Six subcutaneous pouches in twenty-eight rats were prepared and boxes made of Al2O3 were implanted and used as carriers for soft tissue substitutes: a collagen matrix (MG), two volume-stable collagen matrices (FG/MGA), and a polycaprolactone scaffold(E). The volume-stable materials (FG/MGA/E) were further implanted with a twofold (2) and a fourfold (4) compression, created by the stacking of additional layers of the substitute materials. The samples were retrieved at 1, 2, and 12 weeks (10 groups, 3 time points, n = 5 per time point and group, overall, 150 samples). The area fraction of infiltrated fibroblasts and inflammatory cells was evaluated histologically. Due to within-subject comparisons, mixed models were conducted for the primary outcome. The level of significance was set at 5%. RESULTS: The area fraction of fibroblasts increased in all groups over time. At 12 weeks, the densely compressed materials FG4 (1.1%), MGA4 (1.7%), and MGA2 (2.5%) obtained lower values as compared to the other groups, ranging between 4.7 (E2) and 6.5% (MG). Statistically significant differences (p ≤ 0.05) were observed between groups FG4 vs MG/FG2/E/E4 as well as between MGA4 vs MG/FG2/E/E4 and E vs MGA2. CONCLUSIONS: Higher levels of compression led to delayed tissue integration. The effect of different compression levels was more distinct when compared to the differences between the materials. CLINICAL RELEVANCE: All biomaterials demonstrated tissue integration and a minimal concomitant inflammatory reaction. Clinically, it might be more favorable to obtain a sufficient flap release or to reduce the material size to improve the tissue integration processes.

Radiographic density changes may be associated with overloading and implant loss on short implants: A 5-year analysis of a randomized controlled clinical trial.

OBJECTIVES: To analyze changes in radiographic bone density around short implants with and without cantilevers at 5 years post-loading. MATERIALS AND METHODS: Thirty-six patients with two adjacent posterior missing teeth participated in this randomized controlled clinical trial. All patients were randomly allocated to receive either two short implants (6 mm) with single-unit restorations (group TWO) or one single short implant (6 mm) with a cantilever restoration (group ONE-C). Patients were followed up at 6 months, 1, 3, and 5 years. Radiographic analysis was performed, through an arbitrary gray scale value (GSV) of the peri-implant bone, assessing the changes in radiographic density between groups and between time points. Differences in GSV between groups and over time were calculated using a generalized estimating equation to allow for adjustments for the correlation within individuals and between time points. RESULTS: At 5 years, 26 patients remained in the study (15 in group ONE-C; 11 in group TWO). Implant survival rates were 80.4% in group TWO and 84.2% in group ONE-C (p = 0.894). The radiographic analysis revealed that GSVs increased in both groups over time (p < 0.001). The overall radiographic density was higher in group ONE-C than in group TWO in the maxilla (p = 0.030). Conversely, in the mandible, these significant differences between the groups were not found (p > 0.05). Compared to the implants that survived, the implants that failed demonstrated a distinct radiographic density pattern (p < 0.05). CONCLUSION: Within the limitations of the present study, the radiographic bone density in the maxilla appears to increase distinctly around short implants when cantilevers are used. In contrast, the radiographic density in the mandible appears to be unaffected by the use of a cantilever, suggesting a lower threshold of adaptation to occlusal forces and thus a higher susceptibility to overload and implant loss at earlier time points.

Results at the 1-Year Follow-Up of a Prospective Cohort Study with Short, Zirconia Implants.

The objective of this study was to clinically and radiologically evaluate the performance of a short (8 mm), 1-piece, zirconia implant after an observation period of 1 year in function. A total of 47 patients with 1 missing tooth in the position of a premolar or molar were recruited. Short (8 mm), 1-piece, zirconia implants were placed and loaded after a healing period of 2 to 4 months with monolithic crowns made of 3 different materials. Implants were followed up for one year and clinically and radiologically assessed. A total of 46 implants were placed. One was excluded since no primary stability was achieved at implant placement. At the 1-year follow-up, mean marginal bone loss 1 year after loading was 0.05 ± 0.47 mm. None of the implants showed marginal bone loss greater than 1 mm or clinical signs of peri-implantitis. A total of 2 implants were lost during the healing phase and another after loading, resulting in a survival rate of 93% after 1 year. All lost implants showed a sudden increased mobility with no previous signs of marginal bone loss or peri-implant infection. The short, 8 mm, zirconia implants showed stable marginal bone levels over the short observation period of 1 year. Although they revealed slightly lower survival rates, they can be suggested for the use in sites with reduced vertical bone. Scientific data are very limited, and long-term data are not yet available, and therefore, they are needed.

Autogenous bone block versus collagenated xenogeneic bone block in the reconstruction of the atrophic alveolar ridge: A non-inferiority randomized clinical trial.

AIM: To compare the efficacy of equine-derived collagenated xenogeneic bone blocks (CXBB) and autogenous bone block (ABB) for lateral alveolar ridge augmentation and two-stage implant placement. MATERIALS AND METHODS: Sixty-four patients with tooth gaps up to four teeth and atrophic alveolar ridges with ≤4 mm were randomly assigned to lateral augmentation using CXBB or ABB. Lateral bone thickness (LBT) was measured 2 mm below the alveolar crest at augmentation surgery and 30 weeks later at implant placement. Implant-related outcomes, adverse events, surgery duration, pain sensation, analgesic consumption, and oral health-related quality of life were also assessed. Data were analysed using Fisher's exact, Mann-Whitney, and Wilcoxon signed-rank tests. RESULTS: At 30 weeks, the median change in LBT amounted to 2.90 (CXBB) and 3.00 (ABB), respectively. Secondary endpoints demonstrated similar results for CXBB and ABB in terms of possibility to place an implant, need to perform a secondary bone augmentation at implant placement and rate of complications. Early implant failure was 20% for CXBB and 10% for ABB, with no difference between the groups. Pain scores and post-operative consumption of analgesics were significantly lower in the CXBB group than in the ABB group, especially during the first days post-surgery. CONCLUSIONS: CXBB is non-inferior to ABB for horizontal alveolar ridge augmentation and two-stage implant placement.

Anterior implant restorations with a convex emergence profile increase the frequency of recession: 12-month results of a randomized controlled clinical trial.

AIM: To test whether the emergence profile (CONVEX or CONCAVE) of implant-supported crowns influences the mucosal margin stability up to 12 months after insertion of the final restoration. MATERIALS AND METHODS: Forty-seven patients with a single implant in the anterior region were randomly allocated to one of three groups: (1) CONVEX (n = 15), implant provisional and an implant-supported crown both with a convex profile; (2) CONCAVE (n = 16), implant provisional and an implant-supported crown both with a concave profile; (3) CONTROL (n = 16), no provisional (healing abutment only) and an implant-supported crown. All patients were recalled at baseline, 6, and 12 months. The stability of mucosal margin along with clinical, aesthetic, and profilometric outcomes as well as time and costs were evaluated. To predict the presence of recession, multivariable logistic regressions were performed and linear models using generalized estimation equations were conducted for the different outcomes. RESULTS: Forty-four patients were available at 12 months post-loading. The frequency of mucosal recession amounted to 64.3% in group CONVEX, 14.3% in group CONCAVE, and 31.4% in group CONTROL. Regression models revealed that a CONVEX profile was significantly associated with the presence of recessions (odds ratio: 12.6, 95% confidence interval: 1.82-88.48, p = .01) compared with the CONCAVE profile. Pink aesthetic scores amounted to 5.9 in group CONVEX, 6.2 in group CONCAVE, and 5.4 in group CONTROL, with no significant differences between the groups (p = .735). Groups CONVEX and CONCAVE increased the appointments and costs compared with the CONTROL group. CONCLUSIONS: The use of implant-supported provisionals with a CONCAVE emergence profile results in a greater stability of the mucosal margin compared with a CONVEX profile up to 12 months of loading. This is accompanied, however, by increased time and costs compared with the absence of a provisional and may not necessarily enhance the aesthetic outcomes. TRIAL REGISTRATION: German Clinical Trials Register; DRKS00009420.

Restorative angle of zirconia restorations cemented on non-original titanium bases influences the initial marginal bone loss: 5-year results of a prospective cohort study.

AIM: To assess radiographic, restorative, clinical and technical outcomes as well as patient satisfaction of directly veneered zirconia restorations cemented on non-original titanium bases over 5 years. MATERIAL AND METHODS: Twenty-four patients with a single missing tooth in the aesthetic zone were recruited. All patients received a two-piece implant with a screw-retained veneered zirconia restoration cemented extraorally on a titanium base abutment. Marginal bone levels (MBL), marginal bone changes, technical complications, patient satisfaction and clinical parameters including probing depth, bleeding on probing and plaque index were assessed at crown delivery (baseline), at 1 year (FU-1) and 5 years (FU-5) of follow-up. To investigate the relationship between restorative angle and MBL as well as marginal bone changes (bone loss/bone gain), correlation tests and linear regression models were carried out. RESULTS: Twenty-two patients were available for re-examination at 5 years. The mean MBL amounted to 0.54 ± 0.39 mm at baseline, and to 0.24 ± 0.35 at FU-5 (=bone gain) (p < .001). At FU-1, a positive correlation (r = .5) between the mesial restorative angle and mesial MBL was found (p = .012). Marginal bone changes between baseline and FU-1 at mesial sites were also positively correlated with the mesial restorative angle (r = .5; p = .037). Linear and logistic regression models confirmed that mesial marginal bone loss was significantly associated with the mesial restorative angle at FU-1 (p < .05). At 5 years, these significant associations at mesial sites disappeared (p > .05). At distal sites, no correlations or associations between the restorative angle and MBL or marginal bone changes were found regardless of the time point. During the 5-year follow-up, 5 technical complications occurred, mainly within the first year and mostly chippings. All patients were entirely satisfied with their implant-supported restoration at 5 years. CONCLUSION: Within the limitations of the present study, the restorative angle of implant-supported crowns on non-original titanium bases might influence the initial marginal bone loss but without affecting their favourable long-term clinical performance. A restorative angle of <40° may limit the initial marginal bone loss at implant-supported crowns with titanium bases.