RESUMEN
Precast concrete (PC) structures have many advantages, but their use in the construction of middle- to high-rise buildings is limited. The construction of PC structures requires skills in various operations such as transportation, assembly, lifting, and structural soundness. In particular, regarding the seismic design of PC structures, it is necessary to clearly evaluate whether they have the same structural performance and usability as integral RC (cast-in-place) structures. In this paper, an experimental study was conducted to investigate whether PC members can achieve a seismic performance equivalent to that of RC members in beam-column joints, which are representative moment-resisting frames. The main variables are the two types of structural systems (intermediate and special moment-resisting frames) and the design flexural strength ratio of the columns and beams. The experimental and analytical results showed that the seismic performance of the PC specimens was equivalent to that of the RC specimens in terms of strength, stiffness, energy dissipation, and strain distribution, except for the specimen with splice sleeve bond failure of the column reinforcement (poor filling of the internal mortar). In addition, the I series satisfied the present emulation evaluation criteria for special moment-resisting frames of PC structures, confirming the possibility of applying intermediate moment-resisting frames.
RESUMEN
We fabricate three-dimensional wavelength-division multiplexing (3D-WDM) interconnects comprising three SixNy layers using a CMOS-compatible process. In these interconnects, the optical signals are coupled directly to a SixNy grating coupler in the middle SixNy layer and demultiplexed by a 1 × 4 SixNy array waveguide grating (AWG). The demultiplexed optical signals are interconnected from the middle SixNy layer to the bottom and top SixNy layers by four SiOxNy interlayer couplers. A low insertion loss and low crosstalk are achieved in the AWG. The coupling losses of the SiOxNy interlayer couplers and SixNy grating coupler are â¼1.52â dB and â¼4.2â dB, respectively.
RESUMEN
This study was conducted to evaluate the flexural performance of hollow core slabs (HCS) incorporating the effect of surface roughness. The HCSs are suitable for long span structures due to reduced self-weight. The specimens were HCS with topping concrete and the variables were cross sectional height and surface roughness. The tests were conducted on simply supported beams under four-point loads. The results showed that specimens with interface roughness applied in the lengthwise direction of members exhibited ductile flexural behavior up to peak load than those with interface roughness applied in the member width direction. Their flexural strength was also higher by 1-7% on average, indicating that they are advantageous in improving structural performance.
RESUMEN
We present the flat-top supercontinuum source with high repetition rate over a broad bandwidth. The flatness and high repetition rate are achieved by iterative optical line-by-line spectrum shaping on electro-optic optical frequency combs. By applying Gaussian apodized pulse train to a highly nonlinear medium with optimized Gaussian coefficient and nonlinear polarization rotation techniques, we implemented here a flat-top supercontinuum with a 47.7â nm bandwidth at 3â dB and 30â GHz repetition rate. The generation of high repetition rate supercontinuum sources with smooth and coherent spectrum is the critical challenging task for many applications such as optical communications and the optical arbitrary waveform generation. This work leads us to new possibilities for generating hundreds or thousands of flattened coherent optical carriers with a simple configuration.
RESUMEN
We demonstrate a terahertz (THz) radiation using log-spiral-based low-temperature-grown (LTG) InGaAs photoconductive antenna (PCA) modules and a passively mode-locked 1030 nm Yb-doped fiber laser. The passively mode-locked Yb-doped fiber laser is easily implemented with nonlinear polarization rotation in the normal dispersion using a 10-nm spectral filter. The laser generates over 250 mW of the average output power with positively chirped 1.58 ps pulses, which are dechirped to 127 fs pulses using a pulse compressor outside the laser cavity. In order to obtain THz radiation, a home-made emitter and receiver constructed from log-spiral-based LTG InGaAs PCA modules were used to generate and detect THz signals, respectively. We successfully achieved absorption lines over 1.5 THz for water vapor in free space. Therefore, we confirm that a mode-locked Yb-doped fiber laser has the potential to be used as an optical source to generate THZ waves.
RESUMEN
Photoconductive antennas with nano-structured electrodes and which show significantly improved performances have been proposed to satisfy the demand for compact and efficient terahertz (THz) sources. Plasmonic field enhancement was previously considered the dominant mechanism accounting for the improvements in the underlying physics. However, we discovered that the role of plasmonic field enhancement is limited and near-field distribution of bias field should be considered as well. In this paper, we clearly show that the locally enhanced bias field due to the size effect is much more important than the plasmonic enhanced absorption in the nano-structured electrodes for the THz emitters. Consequently, an improved nano-electrode design is presented by tailoring bias field distribution and plasmonic enhancement. Our findings will pave the way for new perspectives in the design and analysis of plasmonic nano-structures for more efficient THz photonic devices.
RESUMEN
In this study, inspired by the frequency-modulated continuous-wave (FMCW) method, an operation scheme of continuous-wave (CW) terahertz (THz) homodyne system is proposed and evaluated. For this purpose, we utilized the fast and stable wavelength tuning characteristics of a dual-mode laser (DML) as a beating source. Using the frequency-modulated THz waves generated by DML, a cost-effective and robust operation of CW THz system to be applicable to the measurements of thickness or refractive index of a sample is demonstrated. We believe that the proposed scheme shows a potential to the implementations of compact and fast CW THz measurement systems that can be useful in many THz applications.
RESUMEN
We demonstrate real-time continuous-wave terahertz (THz) line-scanned imaging based on a 1 × 240 InGaAs Schottky barrier diode (SBD) array detector with a scan velocity of 25 cm/s, a scan line length of 12 cm, and a pixel size of 0.5 × 0.5 mm². Foreign substances, such as a paper clip with a spatial resolution of approximately 1 mm that is hidden under a cracker, are clearly detected by this THz line-scanning system. The system consists of the SBD array detector, a 200-GHz gyrotron source, a conveyor system, and several optical components such as a high-density polyethylene cylindrical lens, metal cylindrical mirror, and THz wire-grid polarizer. Using the THz polarizer, the signal-to-noise ratio of the SBD array detector improves because the quality of the source beam is enhanced.
Asunto(s)
Arsenicales/química , Sistemas de Computación , Electrónica/instrumentación , Galio/química , Indio/química , Fenómenos Ópticos , Radiación TerahertzRESUMEN
Terahertz (THz) waves have been exploited for the non-contact measurements of thickness and refractive index, which has enormous industrial applicability. In this work, we demonstrate a 1.3-µm dual-mode laser (DML)-based continuous-wave THz system for the real-time measurement of a commercial indium-tin-oxide (ITO)-coated glass. The system is compact, cost-effective, and capable of performing broadband measurement within a second at the setting resolution of 1 GHz. The thickness of the glass and the sheet conductivity of the ITO film were successfully measured, and the measurements agree well with those of broadband pulse-based time domain spectroscopy and Hall measurement results.
Asunto(s)
Conductometría/instrumentación , Vidrio/química , Rayos Láser , Ensayo de Materiales/instrumentación , Fotometría/instrumentación , Radiación Terahertz , Compuestos de Estaño/química , Conductividad Eléctrica , Compuestos de Estaño/análisisRESUMEN
A novel buried photomixer for integrated photonic terahertz devices is proposed. The active region of the mesa-structure InGaAs photomixer is buried in an InP layer grown by metalorganic chemical vapor deposition (MOCVD) to improve heat dissipation, which is an important problem for terahertz photomixers. The proposed photomixer shows good thermal properties compared to a conventional planar-type photomixer. The MOCVD regrowth process indicates the possibility for THz photomixers to be integrated monolithically with conventional photonic devices.
RESUMEN
We present a terahertz (THz) broadband antenna-integrated 1 × 20 InGaAs Schottky barrier diode (SBD) array detector with an average responsivity of 98.5 V/W at a frequency of 250 GHz, which is measured without attaching external amplifiers and Si lenses, and an average noise equivalent power (NEP) of 106.6 pW/âHz. The 3-dB bandwidth of the SBD detector is also investigated at approximately 180 GHz. For implementing an array-type SBD detector by a simple fabrication process to achieve a high yield, a structure comprising an SiN(x) layer instead of an air bridge between the anode and the cathode is designed. THz line beam imaging using a Gunn diode emitter with a center frequency of 250 GHz and a 1 × 20 SBD array detector is successfully demonstrated.
RESUMEN
We report a high-speed (~2 kHz) dynamic multiplexed fiber Bragg grating (FBG) sensor interrogation using a wavelength-swept laser (WSL) with a polygon-scanner-based wavelength filter. The scanning frequency of the WSL is 18 kHz, and the 10 dB scanning bandwidth is more than 90 nm around a center wavelength of 1,540 nm. The output from the WSL is coupled into the multiplexed FBG array, which consists of five FBGs. The reflected Bragg wavelengths of the FBGs are 1,532.02 nm, 1,537.84 nm, 1,543.48 nm, 1,547.98 nm, and 1,553.06 nm, respectively. A dynamic periodic strain ranging from 500 Hz to 2 kHz is applied to one of the multiplexed FBGs, which is fixed on the stage of the piezoelectric transducer stack. Good dynamic performance of the FBGs and recording of their fast Fourier transform spectra have been successfully achieved with a measuring speed of 18 kHz. The signal-to-noise ratio and the bandwidth over the whole frequency span are determined to be more than 30 dB and around 10 Hz, respectively. We successfully obtained a real-time measurement of the abrupt change of the periodic strain. The dynamic FBG sensor interrogation system can be read out with a WSL for high-speed and high-sensitivity real-time measurement.
Asunto(s)
Filtración/instrumentación , Rayos Láser , Refractometría/instrumentación , Transductores , Módulo de Elasticidad , Diseño de Equipo , Análisis de Falla de Equipo , Resistencia a la TracciónRESUMEN
A simple thickness measurement method based on the coherent homodyne CW THz system was demonstrated; it does not require precise control of the frequencies of the beat source, and only accurate scanning of the optical delay line is needed. Three beat frequencies are sufficient for measuring the thickness of a sample without considering the modulo 2π ambiguity. A novel compact 1.55 µm λ/4 phase-shifted dual-mode laser (DML) was developed as an optical beat source for the CW THz system. The thickness of a sample was accurately estimated from the measurements using the proposed method. Our results clearly show the possibility of a compact, simple, and cost-effective CW THz system for practical applications.
RESUMEN
A widely tunable dual mode laser diode with a single cavity structure is demonstrated. This novel device consists of a distributed feedback (DFB) laser diode and distributed Bragg reflector (DBR). Micro-heaters are integrated on the top of each section for continuous and independent wavelength tuning of each mode. By using a single gain medium in the DFB section, an effective common optical cavity and common modes are realized. The laser diode shows a wide tunability of the optical beat frequency, from 0.48 THz to over 2.36 THz. Continuous wave THz radiation is also successfully generated with low-temperature grown InGaAs photomixers from 0.48 GHz to 1.5 THz.
RESUMEN
We propose a compact fiber-pigtailed InGaAs photoconductive antenna (FPP) module having an effective heat-dissipation solution as well as a module volume of less than 0.7 cc. The heat-dissipation of the FPP modules when using a heat-conductive printed circuit board (PCB) and an aluminium nitride (AlN) submount, without any cooling systems, improve by 40% and 85%, respectively, when compared with a photoconductive antenna chip on a conventional PCB. The AlN submount is superior to those previously reported as a heat-dissipation solution. Terahertz time-domain spectroscopy (THz-TDS) using the FPP module perfectly detects the absorption lines of water vapor in free space and an α-lactose sample.
RESUMEN
We demonstrate a tunable continuous-wave (CW) terahertz (THz) homodyne system with a novel detuned dual-mode laser diode (DML) and low-temperature-grown (LTG) InGaAs photomixers. The optical beat source with the detuned DML showed a beat frequency tuning range of 0.26 to over 1.07 THz. Log-spiral antenna integrated LTG InGaAs photomixers are used as THz wave generators and detectors. The CW THz radiation frequency was continuously tuned to over 1 THz. Our results clearly show the feasibility of a compact and fast scanning CW THz spectrometer consisting of a fiber-coupled detuned DML and photomixers operating in the 1.55-µm range.
Asunto(s)
Espectroscopía de Terahertz/métodos , Diseño de Equipo , Humanos , Rayos Láser , Láseres de Semiconductores , Luz , Ensayo de Materiales , Microscopía Electrónica de Rastreo/métodos , Semiconductores , Radiación Terahertz , Factores de TiempoRESUMEN
We propose a rapidly frequency-swept optical beat source for continuous wave (CW) THz generation using a wavelength swept laser and a fixed distributed feedback (DFB) laser. The range of the sweeping bandwidth is about 17.3 nm (2.16 THz), 1541.42-1558.72 nm. The achieved side mode suppression ratio for both wavelengths within the full sweeping range is more than 45 dB. We observe CW THz signals for tunable optical beat sources using a fiber coupled CW THz measurement system to confirm the feasibility of using our frequency swept optical beat source as a CW THz radiation source. The THz output signal falls to the thermal noise level of the low-temperature grown (LTG) InGaAs photomixer beyond 1.0 THz. The rapidly frequency-swept optical beat source will be useful for generating high-speed tunable CW THz radiation.
RESUMEN
OBJECTIVES: This study presents the information system for Pusan National University Hospital (PNUH), evaluates its performance qualitatively, and conducts economic analysis. METHODS: Information system for PNUH was designed by component-based development and developed by internet technologies. Order Communication System, Electronic Medical Record, and Clinical Decision Support System were newly developed. The performance of the hospital information system was qualitatively evaluated based on the performance reference model in order to identify problem areas for the old system. The Information Economics approach was used to analyze the economic feasibility of hospital information system in order to account for the intangible benefits. RESULTS: Average performance scores were 3.16 for input layer, 3.35 for process layer, and 3.57 for business layer. In addition, the cumulative benefit to cost ratio was 0.50 in 2011, 1.73 in 2012, 1.76 in 2013, 1.71 in 2014, and 1.71 in 2015. The B/C ratios steadily increase as value items are added. CONCLUSIONS: While overall performance scores were reasonably high, doctors were less satisfied with the system, perhaps due to the weak clinical function in the systems. The information economics analysis demonstrated the economic profitability of the information systems if all intangible benefits were included. The second qualitative evaluation survey and economic analysis were proposed to evaluate the changes in performance of the new system.
RESUMEN
The successful demonstration of an optical fiber-coupled terahertz time-domain spectroscopy (THz-TDS) system is described in this study. The terahertz output power of the emitter with two optical band rejection filters was 132 nW, which is an improvement of 70% over the output power without any filters. This improvement is due to the suppression of an optical modulated signal that is reverse-generated when an alternating current bias exceeding a certain threshold is applied to the emitter. Under the optimal alignment conditions, the terahertz detector in a fiber-coupled THz-TDS system clearly measured water vapor dips in the free space.
RESUMEN
We propose a widely tunable dual-wavelength Erbium-doped fiber laser that uses two micro-heater-integrated Fabry-Perot laser diodes (FP-LDs) and two fiber Bragg gratings (FBGs) for tunable continuous-wave (CW) terahertz (THz) radiation. Each wavelength can be independently tuned by using an FP-LD and an FBG. The wavelength fine tuning is achieved by simultaneously applying current to the micro-heater on the FP-LD and strain to the FBG. The side-mode suppression ratio is more than 35 dB for both wavelengths. The wavelength spacing of the dual wavelength can be continuously tuned from 3.2 nm to 9.6 nm. Continuous frequency tuning of the CW THz radiation is also successfully achieved using an InGaAs-based photomixer with our dual-wavelength fiber laser as the optical beat source. The emitted CW THz radiation is continuously tuned from 0.3 to 0.8 THz.