Dynamic molecular switches with hysteretic negative differential conductance emulating synaptic behaviour.

To realize molecular-scale electrical operations beyond the von Neumann bottleneck, new types of multifunctional switches are needed that mimic self-learning or neuromorphic computing by dynamically toggling between multiple operations that depend on their past. Here, we report a molecule that switches from high to low conductance states with massive negative memristive behaviour that depends on the drive speed and number of past switching events, with all the measurements fully modelled using atomistic and analytical models. This dynamic molecular switch emulates synaptic behavior and Pavlovian learning, all within a 2.4-nm-thick layer that is three orders of magnitude thinner than a neuronal synapse. The dynamic molecular switch provides all the fundamental logic gates necessary for deep learning because of its time-domain and voltage-dependent plasticity. The synapse-mimicking multifunctional dynamic molecular switch represents an adaptable molecular-scale hardware operable in solid-state devices, and opens a pathway to simplify dynamic complex electrical operations encoded within a single ultracompact component.

Verification and Temperature-Dependent Rectification by HBQ, the Smallest Unimolecular Donor-Acceptor Rectifier.

Five years ago, rectification of electrical current was found in 4'-bromo-3,4-dicyano-2',5'-dimethoxy-[1,1'-biphenyl]-2,5-dione (1), a hemibiquinone (which we will call either 1 or HBQ) that has a very small working length (1.1 nm). Monolayers of HBQ on AuTS were detected by "nanodozing" atomic force microscopy (AFM) and were contacted with two types of top electrodes: either cold Au or eutectic Ga-In. Here, we describe cyclic voltammetry of a self-assembled monolayer (SAM) of HBQ and its orientation on a gold substrate with angle-resolved X-ray photoelectron spectroscopy. New measurements of its rectification as a monolayer as a function of bias range and temperature confirm and prove that HBQ is truly the smallest donor-acceptor rectifier and provide some insight into the mechanism of rectification.

Stable Universal 1- and 2-Input Single-Molecule Logic Gates.

Controllable single-molecule logic operations will enable development of reliable ultra-minimalistic circuit elements for high-density computing but require stable currents from multiple orthogonal inputs in molecular junctions. Utilizing the two unique adjacent conductive molecular orbitals (MOs) of gated Au/S-(CH2 )3 -Fc-(CH2 )9 -S/Au (Fc = ferrocene) single-electron transistors (≈2 nm), a stable single-electron logic calculator (SELC) is presented, which allows real-time modulation of output current as a function of orthogonal input bias (Vb ) and gate (Vg ) voltages. Reliable and low-voltage (ǀVb ǀ ≤ 80 mV, ǀVg ǀ ≤ 2 V) operations of the SELC depend upon the unambiguous association of current resonances with energy shifts of the MOs (which show an invariable, small energy separation of ≈100 meV) in response to the changes of voltages, which is confirmed by electron-transport calculations. Stable multi-logic operations based on the SELC modulated current conversions between the two resonances and Coulomb blockade regimes are demonstrated via the implementation of all universal 1-input (YES/NOT/PASS_1/PASS_0) and 2-input (AND/XOR/OR/NAND/NOR/INT/XNOR) logic gates.

Graphene nanocoating provides superb long-lasting corrosion protection to titanium alloy.

OBJECTIVE: The presence of metallic species around failed implants raises concerns about the stability of titanium alloy (Ti-6Al-4V). Graphene nanocoating on titanium alloy (GN) has promising anti-corrosion properties, but its long-term protective potential and structural stability remains unknown. The objective was to determine GN's anti-corrosion potential and stability over time. METHODS: GN and uncoated titanium alloy (Control) were challenged with a highly acidic fluorinated corrosive medium (pH 2.0) for up to 240 days. The samples were periodically tested using potentiodynamic polarization curves, electrochemical impedance spectroscopy and inductively coupled plasma-atomic emission spectroscopy (elemental release). The integrity of samples was determined using Raman spectroscopy, X-ray photoelectron spectroscopy, atomic force microscopy and scanning electron microscopy. Statistical analyses were performed with one-sample t-test, paired t-test and one-way ANOVA with Tukey post-hoc test with a pre-set significance level of 5%. RESULTS: There was negligible corrosion and elemental loss on GN. After 240 days of corrosion challenge, the corrosion rate and roughness increased by two and twelve times for the Control whereas remained unchanged for GN. The nanocoating presented remarkably high structural integrity and coverage area (>98%) at all time points tested. SIGNIFICANCE: Graphene nanocoating protects titanium alloy from corrosion and dissolution over a long period while maintaining high structural integrity. This coating has promising potential for persistent protection of titanium and potentially other metallic alloys against corrosion.

Design, Synthesis and Anticancer Activity of a New Series of N-aryl-N'-[4-(pyridin-2-ylmethoxy)benzyl]urea Derivatives.

The development of cancer treatments requires continuous exploration and improvement, in which the discovery of new drugs for the treatment of cancer is still an important pathway. In this study, based on the molecular hybridization strategy, a new structural framework with an N-aryl-N'-arylmethylurea scaffold was designed, and 16 new target compounds were synthesized and evaluated for their antiproliferative activities against four different cancer cell lines A549, MCF7, HCT116, PC3, and human liver normal cell line HL7702. The results have shown seven compounds with 1-methylpiperidin-4-yl groups having excellent activities against all four cancer cell lines, and they exhibited scarcely any activities against HL7702. Among them, compound 9b and 9d showed greatly excellent activity against the four kinds of cells, and the IC50 for MCF7 and PC3 cell lines were even less than 3 µM.

Bias-Polarity-Dependent Direct and Inverted Marcus Charge Transport Affecting Rectification in a Redox-Active Molecular Junction.

This paper describes the transition from the normal to inverted Marcus region in solid-state tunnel junctions consisting of self-assembled monolayers of benzotetrathiafulvalene (BTTF), and how this transition determines the performance of a molecular diode. Temperature-dependent normalized differential conductance analyses indicate the participation of the HOMO (highest occupied molecular orbital) at large negative bias, which follows typical thermally activated hopping behavior associated with the normal Marcus regime. In contrast, hopping involving the HOMO dominates the mechanism of charge transport at positive bias, yet it is nearly activationless indicating the junction operates in the inverted Marcus region. Thus, within the same junction it is possible to switch between Marcus and inverted Marcus regimes by changing the bias polarity. Consequently, the current only decreases with decreasing temperature at negative bias when hopping is "frozen out," but not at positive bias resulting in a 30-fold increase in the molecular rectification efficiency. These results indicate that the charge transport in the inverted Marcus region is readily accessible in junctions with redox molecules in the weak coupling regime and control over different hopping regimes can be used to improve junction performance.

Reversal of the Direction of Rectification Induced by Fermi Level Pinning at Molecule-Electrode Interfaces in Redox-Active Tunneling Junctions.

Control over the energy level alignment in molecular junctions is notoriously difficult, making it challenging to control basic electronic functions such as the direction of rectification. Therefore, alternative approaches to control electronic functions in molecular junctions are needed. This paper describes switching of the direction of rectification by changing the bottom electrode material M = Ag, Au, or Pt in M-S(CH2)11S-BTTF//EGaIn junctions based on self-assembled monolayers incorporating benzotetrathiafulvalene (BTTF) with EGaIn (eutectic alloy of Ga and In) as the top electrode. The stability of the junctions is determined by the choice of the bottom electrode, which, in turn, determines the maximum applied bias window, and the mechanism of rectification is dominated by the energy levels centered on the BTTF units. The energy level alignments of the three junctions are similar because of Fermi level pinning induced by charge transfer at the metal-thiolate interface and by a varying degree of additional charge transfer between BTTF and the metal. Density functional theory calculations show that the amount of electron transfer from M to the lowest unoccupied molecular orbital (LUMO) of BTTF follows the order Ag > Au > Pt. Junctions with Ag electrodes are the least stable and can only withstand an applied bias of ±1.0 V. As a result, no molecular orbitals can fall in the applied bias window, and the junctions do not rectify. The junction stability increases for M = Au, and the highest occupied molecular orbital (HOMO) dominates charge transport at a positive bias resulting in a positive rectification ratio of 83 at ±1.5 V. The junctions are very stable for M = Pt, but now the LUMO dominates charge transport at a negative bias resulting in a negative rectification ratio of 912 at ±2.5 V. Thus, the limitations of Fermi level pinning can be bypassed by a judicious choice of the bottom electrode material, making it possible to access selectively HOMO- or LUMO-based charge transport and, as shown here, associated reversal of rectification.

Functional Redox-Active Molecular Tunnel Junctions.

Redox-active molecular junctions have attracted considerable attention because redox-active molecules provide accessible energy levels enabling electronic function at the molecular length scales, such as, rectification, conductance switching, or molecular transistors. Unlike charge transfer in wet electrochemical environments, it is still challenging to understand how redox-processes proceed in solid-state molecular junctions which lack counterions and solvent molecules to stabilize the charge on the molecules. In this minireview, we first introduce molecular junctions based on redox-active molecules and discuss their properties from both a chemistry and nanoelectronics point of view, and then discuss briefly the mechanisms of charge transport in solid-state redox-junctions followed by examples where redox-molecules generate new electronic function. We conclude with challenges that need to be addressed and interesting future directions from a chemical engineering and molecular design perspectives.

Electric-field-driven dual-functional molecular switches in tunnel junctions.

To avoid crosstalk and suppress leakage currents in resistive random access memories (RRAMs), a resistive switch and a current rectifier (diode) are usually combined in series in a one diode-one resistor (1D-1R) RRAM. However, this complicates the design of next-generation RRAM, increases the footprint of devices and increases the operating voltage as the potential drops over two consecutive junctions1. Here, we report a molecular tunnel junction based on molecules that provide an unprecedented dual functionality of diode and variable resistor, resulting in a molecular-scale 1D-1R RRAM with a current rectification ratio of 2.5 × 104 and resistive on/off ratio of 6.7 × 103, and a low drive voltage of 0.89 V. The switching relies on dimerization of redox units, resulting in hybridization of molecular orbitals accompanied by directional ion migration. This electric-field-driven molecular switch operating in the tunnelling regime enables a class of molecular devices where multiple electronic functions are preprogrammed inside a single molecular layer with a thickness of only 2 nm.

Directional Excitation of Surface Plasmon Polaritons via Molecular Through-Bond Tunneling across Double-Barrier Tunnel Junctions.

Directional excitation of surface plasmon polaritons (SPPs) by electrical means is important for the integration of plasmonics with molecular electronics or steering signals toward other components. We report electrically driven SPP sources based on quantum mechanical tunneling across molecular double-barrier junctions, where the tunneling pathway is defined by the molecules' chemical structure as well as by their tilt angle with respect to the surface normal. Self-assembled monolayers of S(CH2)nBPh (BPh = biphenyl, n = 1-7) on Au, where the alkyl chain and the BPh units define two distinct tunnel barriers in series, were used to demonstrate and control the geometrical effects. The tilt angle of the BPh unit with respect to the surface normal depends on the value of n, and is 45° when n is even and 23° when n is odd. The tilt angle of the alkyl chain is fixed at 30° and independent of n. For values of n = 1-3, SPPs are directionally launched via directional tunneling through the BPh units. For values of n > 3, tunneling along the alkyl chain dominates the SPP excitation. Molecular level control of directionally launching SPPs is achieved without requiring additional on-chip optical elements, such as antennas, or external elements, such as light sources. Using the molecular tunneling junctions, we provide the first direct experimental demonstration of molecular double-barrier tunneling junctions.

DNA Labeling Generates a Unique Amplification Probe for Sensitive Photoelectrochemical Immunoassay of HIV-1 p24 Antigen.

Photoelectrochemical (PEC) immunoassay is an attractive methodology as it allows for an elegant and sensitive protein assay. However, advanced PEC immunoassay remains challenging and the established amplifications rely almost exclusively on the labeling of various enzymes, which usually suffer the inferior stabilities. Here we report the development and validation of the DNA labeling that leads to a unique amplification probe for the sensitive PEC immunoassay of HIV-1 capsid protein, p24 antigen, an important biomarker of human immune deficiency virus (HIV). Following the sandwich immunobinding, the DNA tags could be released and the subsequent dipurinization of the oligonucleotide strands enables the easy oxidation of free nucleobases at a CdTe quantum dots (QDs) modified ITO transducer. Such DNA tags induced PEC amplification and readout permits the exquisite assay of HIV-1 p24 antigen with high sensitivity. As compared to the existing method of enzymatic labeling, the easy preparation and stability of these labels make them very suitable for PEC amplification. Another merit of this method is that it separates the immunobinding from the PEC transducer, which eliminates the commonly existing affection during the biorecognition processes. This work paves a new route for the PEC immunoassay of HIV-1 p24 antigen and provides a general format for the PEC biomolecular detection by means of the DNA labeling.

[Phenolic constituents of Ampelopsis grossedentata from zhangjiajie].

OBJECTIVE: To study the phenolic constituents from Ampelopsis grossedentata. METHODS: Compounds were isolated using column chromatographic techniques (silica gel, polyamide gel, Sephadex LH-20) and semi-preparative HPLC. Structures were elucidated on the basis of spectral data (NMR and HR-MS). RESULTS: Eight compounds were isolated and identified as ampelopsin (I), 5, 7, 3',4',5'-pentahydroxyflavanone (II), galloyl-beta-D-glucopyranoside (III), gallic acid (IV), ethyl gallate (V), myricitrin (VI), (2R, 3S)-5,7,3',4',5'-pentahydroxyflavanonol (VII) and myricetin (VIII). CONCLUSION: Compounds II and VII are obtained from this genus for the first time.

[Content determination of two isomers containd in Garcinia hanburyi by HPLC].

OBJECTIVE: To establish a method for determing the content of two isomers containd in Garcinia hanburyi by HPLC. METHOD: Chromatographic column of SunFire (Waters) C8 (2.1 mm x 150 mm, 3.5 microm) was adopted, with acetonitrile-methanol-0.3% trifluoroacetic acid (36: 37:27) as the mobile phase. The detection wavelength was 360 nm,the flow rate was 0.3 mL x min(-1), and the column temperature was 28 degrees C. RESULT: The linear regression equation of r-gambogic acid was Y = 2.87 x 10(6) X - 2.24 x 10(5), r = 0.999 9. The linear regression equation of S-gambogic acid was Y = 3.31 x 10(6) X - 1.44 x 10(5), r = 0.999 9. The average recoveries were 100.0% and 100.9%, with RSD being 2.1% and 2.5% (n = 6), respectivley. The average contents of two gambogic acid in G. hanburyi were 30.06% and 21.45%, respectively. CONCLUSION: The method was so convenient and stable that it can be used for identification and content determination of two isomers containd in G. hanburyi.

Effects of Astragaloside IV on heart failure in rats.

BACKGROUND: Astragaloside IV (ASI) in Radix Astragali is believed to be the active component in treating heart failure. The present study aims to examine the effects of ASI on cardiovascular parameters in long-term heart failure in rats. METHODS: Using echocardiographic and haemodynamic measurements, we studied the effects of ASI on congestive heart failure (CHF) induced by ligation of the left coronary artery in rats. RESULTS: ASI (0.1, 0.3 and 1.0 mg/kg/day) attenuated the decline of fractional shortening (FS). The peak derivatives of the left ventricle (LV) pressure (dp/dt) in ASI-treated groups significantly increased. Both LV internal diameters in diastole (LVIDd) and in systole (LVIDs) decreased significantly after ASI treatment (0.3 and 1.0 mg/kg/day). ASI (1.0 mg/kg/day) attenuated the decrease of LV systolic pressure (LVSP). ASI treatment inhibited compensatory hypertrophy of myocardial cells and lowered the number of apoptotic myocytes. CONCLUSION: ASI improved cardiac functions as measured by cardiovascular parameters.

[Determination of the total content of astragaloside IV in Radix Astragali].

OBJECTIVE: To determine the total content of astragaloside IV in Radix Astragali. METHODS: The measurement conditions were used as follows: Irregular C18 (4.6 mm x 250 mm, 5 microm) column; mobile phase: acetonitrile-water (32:68); flow rate: 1.0 ml/min; detector: ELSD 2000; the temperature of drift tube: 100 degrees C; gas flow: 2.7 L/min. RESULTS: Eight batches of Radix Astragali from different sources were determined. The stability, precision and reproducibility of the method were studied, RSD <3%. CONCLUSION: There is great difference between the content of astragaloside IV in Radix Astragali by different processing methods.