RESUMEN
Hydrogel-based wound dressings have been developed for rapid wound healing; however, their adhesive properties have not been adequately investigated. Excessive adhesion to the skin causes wound expansion and pain when hydrogels absorb exudates and swell at wound sites. Herein, we developed a low-adhesion and low-swelling hydrogel dressing using alginate, which is non-adhesive to cells and skin tissue, CaCO3, and carbonated water. The alginate/CaCO3 solution rapidly formed a hydrogel upon the addition of carbonated water, and the CO2 in the hydrogel diffused into the atmosphere, preventing acidification and obtaining a pH value suitable for wound healing. Remarkably, the skin adhesion and swelling of the hydrogel were 11.9- to 16.5-fold and 1.9-fold lower, respectively, than those of clinical low-adhesion hydrogel dressings. In vivo wound-healing tests in mice demonstrated its therapeutic efficacy, and the prepared hydrogel prevented temporary wound dilation during early healing. These results illustrate the importance of controlling skin adhesion and swelling in wound dressings and demonstrate the potential clinical applications of this wound-friendly hydrogel dressing.
Asunto(s)
Agua Carbonatada , Ratones , Animales , Hidrogeles/farmacología , Hidrogeles/química , Alginatos/farmacología , Alginatos/química , Dilatación , Piel/patología , Adherencias Tisulares/patología , Adhesivos , Antibacterianos/químicaRESUMEN
Anionic polysaccharides, including low-methoxy (LM) pectin, are extensively used in biomaterial applications owing to their safety, biocompatibility, and feasibility in constructing supramolecular assemblies by forming egg-box structures with divalent cations. Mixing an LM pectin solution with CaCO3 spontaneously forms a hydrogel. The gelation behavior can be controlled by adding an acidic compound to change the solubility of CaCO3. CO2 is used as the acidic agent and can be easily removed after gelation, thereby reducing the acidity of the final hydrogel. However, CO2 addition has been controlled under varied thermodynamical conditions; therefore, specific CO2 effects on gelation are not necessarily visualized. To evaluate the CO2 impact on the final hydrogel, which would be extended to control hydrogel properties further, we utilized carbonated water to supply CO2 into the gelation mixture without changing its thermodynamic conditions. The addition of the carbonated water accelerated gelation and significantly increased the mechanical strength, promoting cross-linking. However, the CO2 volatilized into the atmosphere, and the final hydrogel became more alkaline than that without the carbonated water, probably because a considerable amount of the carboxy group was consumed for cross-linking. Moreover, when aerogels were prepared from the hydrogels with carbonated water, they exhibited highly ordered networks of elongated porosity in scanning electron microscopy, proposing an intrinsic structural change by CO2 in the carbonated water. We also controlled the pH and strength of the final hydrogels by changing the CO2 amounts in the carbonated water added, thereby validating the significant effect of CO2 on hydrogel properties and the feasibility of using carbonated water.
RESUMEN
To develop and assess new dosage forms for the alternative to existing oral medication for peripheral neuropathy, a hydrogel film in the skin patch formation containing tramadol hydrochloride (TRA), a water-soluble drug used as an analgesic, was prepared and evaluated. A hydrogel film composed of 20%(w/w) hydroxypropyl methylcellulose (HPMC) irradiated with electron beams had high transparency and elasticity similar to commercially available wound dressings and soft tissues, suggesting that it is a suitable substrate for TRA. The inclusion of TRA was enabled by immersing the HPMC hydrogel film in TRA aqueous solution. The release and skin permeation of TRA from TRA-containing hydrogel films differed depending on the electron beam dose. Moreover, the analgesic effects in mice were confirmed in a dose-dependent manner. This study demonstrated the usefulness of a hydrogel film containing TRA as a new dosage form alternative to the existing oral medication for peripheral neuropathy.
Asunto(s)
Neuralgia , Tramadol , Ratones , Animales , Derivados de la Hipromelosa , Neuralgia/tratamiento farmacológico , Agua , Analgésicos , MetilcelulosaRESUMEN
The purpose of this study was to evaluate the effects of once daily (OD) or every 48 hours (every-48-h) administration of amikacin (AMK) on renal function and ototoxicity in neonates. We investigated the frequency of nephrotoxicity and ototoxicity in neonates who received AMK OD or every-48-h from April 2015 to March 2021 and underwent dose evaluation by therapeutic drug monitoring (TDM). In addition, the relationships among birth weight, gestational age, AMK peak and trough values, total duration of AMK administration, and total AMK dose were examined separately for nephrotoxicity and ototoxicity. AMK was administered OD in 38 patients and every-48-h in 62 patients. Nephrotoxicity was observed in 8 patients on OD versus 36 patients on every-48-h administration (P < .001), and ototoxicity was observed in 2 patients on OD versus 12 patients on every-48-h administration (P = .192). For nephrotoxicity, only the trough value was relevant (P = .007). In terms of ototoxicity, there were no influencing factors. The risk of nephrotoxicity was higher with every-48-h AMK administration than with OD AMK administration, with nephrotoxicity depending on the trough value. However, compared with OD, the every-48-h group had lower body weight and possibly poorer original renal function. In addition, ototoxicity did not differ by administration method. Based on these results, every-48-h administration of AMK can be used as safely as OD by performing TDM and preventing high concentrations.
Asunto(s)
Ototoxicidad , Insuficiencia Renal , Recién Nacido , Humanos , Amicacina/efectos adversos , Antibacterianos , Insuficiencia Renal/tratamiento farmacológico , RiñónRESUMEN
Baclofen is used as a skeletal muscle relaxant for multiple sclerosis patients and pediatric patients with cerebral palsy and is prescribed to pediatric patients at 0.3 to 1.0 mg/kg/dose. Baclofen tablets, an oral drug, are usually administered as a powder in pediatric wards after a formulation change by the pharmacist. However, there is no information about stability and assurance of quality for compounded products. The purpose of this study was to design a 10 mg/g oral powder of baclofen and to investigate the stability and changes in the physical properties of this compounded product. A 10 mg/g baclofen powder was prepared by adding extra-fine crystal lactose hydrate to crushed and filtrated baclofen tablets and was stored in a polycarbonate amber bottle with desiccant or in a coated paper laminated with cellophane and polyethylene. The stability of baclofen at 25 ± 2 °C/60 ± 5%RH was tested for 120 days in 'bottle (closed)', 'bottle (in use)', and 'laminated' storage conditions. Baclofen concentrations ranged from 90.0% to 110.0% of the initial concentration under all storage conditions. No crystallographic or dissolution changes were observed after storage. This information can help with the management of baclofen compounded powder in pharmacies.
RESUMEN
BACKGROUND/AIM: p62 (also known as sequestosome 1) is involved in cancer progression, and high expression of p62 indicates poor clinical outcome in several cancer types. However, the association between p62 gene expression and cancer stem cells (CSCs) in breast cancer subtypes remains unclear. MATERIALS AND METHODS: In the present study, genomic datasets of primary breast cancer (The Cancer Genome Atlas, n=593; and Molecular Taxonomy of Breast Cancer International Consortium, n=2,509) were downloaded. p62 Expression was then examined in normal and breast cancer tissues derived from the same patients. Kaplan-Meier and multivariate Cox regression analyses were employed to evaluate disease-specific survival. Next, the effect on cell viability and in vitro tumor-sphere formation of p62 knockdown using targeted small interfering RNA was assessed by using cells with high activity of aldehyde dehydrogenase 1 (ALDH1high). RESULTS: Patients with normal-like, luminal A or luminal B breast cancer with p62high had poor prognosis. Furthermore, patients with p62high ALDH1A3high luminal B type also exhibited poor prognoses. Knockdown of p62 suppressed viability and tumor-sphere formation by ALDH1high cells of the luminal B-type cell lines BT-474 and MDA-MB-361. These results suggest that p62 is essential for cancerous progression of ALDH1-positive luminal B breast CSCs, and contributes to poor prognosis of luminal B breast cancer. CONCLUSION: p62 is potentially a prognostic marker and therapeutic target for ALDH1-positive luminal B breast CSCs.
Asunto(s)
Neoplasias de la Mama , Familia de Aldehído Deshidrogenasa 1 , Neoplasias de la Mama/metabolismo , Femenino , Humanos , Isoenzimas/metabolismo , Pronóstico , Retinal-Deshidrogenasa/metabolismoRESUMEN
Mefenamic acid (MFA), a water-insoluble drug, is used as a suspension in the medical field, but it requires shaking before using to disperse MFA content in the suspension. In previous studies, trials to prepare MFA suspension with high dispersion stability by atomizing MFA by the wet-milling method. However, HPC is used for atomizing MFA. Therefore, the optimum concentration and molecular weight for atomizing MFA have not been investigated. In this study, we investigated the optimum molecular weight and concentration of HPC for the micronization of MFA. As a result, MFA particles became fine particles by adding SDS, and the particle size was also smaller than that of HPC alone. In addition, the suspension with the highest dispersion stability can be obtained when a mixed solution of 1.0% HPC-SL and 0.12% SDS aqueous solution is used. Therefore, this study considers that the addition of SDS and 1.0% HPC-SL aqueous solution are optimal for improving the dispersion stability of the MFA suspension.
RESUMEN
Polytetrafluoroethylene (PTFE) has excellent physical properties and has been used in a wide range of applications in various fields. Adsorption research on PTFE is essential as primary research for the further application of PTFE. We attempted to adsorb coal tar dyes and model drugs such as lidocaine onto PTFE as a guideline to search for medicines that adsorb onto PTFE. Saturation curves were obtained after analyzing the adsorption of coal tar dyes on PTFE using the Hanes-Woolf plot. In addition, we collected multiple cases of ATR-FTIR spectral changes and/or retention depending on TPM derivatives and other adsorbates. Lidocaine matched some coal tar dye for the apparent spectral changes between the adsorbed molecules and its crystalline powder. The apparent spectral changes are blue-shifted, suggesting a hydrophobic interaction between the dyes/lidocaine and porous PTFE. This work provides a promising strategy for further application of PTFE.
RESUMEN
As a candidate microRNA antifibrotic effector in skin wounds, miR-146b-5p was upregulated by basic FGF, and PDGFRα was identified as a direct target of miR-146b-5p in fibroblasts. The treatment of fibroblasts with a miR-146b-5p mimic markedly downregulated the expression of PDGFRα and collagen type I. miR-146b-5p mimic transfection in wounds markedly attenuated cutaneous fibrosis, whereas a miR-146b-5p inhibitor strongly promoted fibrosis, with increases in PDGFRα and collagen I levels. These results indicate the positive effects of miR-146b-5p for the suppression of fibrosis, possibly through the inhibition of PDGFRα. The miR-146b-5p inhibitor markedly increased CD34+ vessel numbers and CD34 expression in wounds. We found miR-146b-5p+ cells in close contact with S100+ adipocytes. Moreover, we discovered the specific colocalization of the exosome marker CD81 and miR-146b-5p in the adipose tissue cells of mimic-transfected wounds, with miR-146b-5p signals being detected in the FSP1+ fibroblastic cells of adipose tissues. Therefore, fibroblastic cells of adipose tissues, which may specifically pick up and contain miR-146b-5p by exosome after transfection, may play an important role in the suppression of fibrosis. In this process, the inhibition of PDGFRα in adipose tissue cells by miR-146b-5p may lead to the loss of their PDGFRα-induced profibrotic activities, thereby suppressing fibrosis.
Asunto(s)
MicroARNs , Receptor alfa de Factor de Crecimiento Derivado de Plaquetas , Piel , Heridas y Lesiones , Animales , Fibroblastos/metabolismo , Fibrosis , MicroARNs/metabolismo , Ratas , Proteínas Tirosina Quinasas Receptoras/metabolismo , Receptor alfa de Factor de Crecimiento Derivado de Plaquetas/genética , Receptor alfa de Factor de Crecimiento Derivado de Plaquetas/metabolismo , Piel/lesiones , Heridas y Lesiones/genéticaRESUMEN
BACKGROUND: In neonates, vancomycin (VCM) is used to treat Gram-positive bacterial infections. However, VCM blood concentrations are affected by gestational age, bodyweight (BW), and renal function. The initial VCM dose adjustment can therefore be difficult, and few reports have evaluated this issue. In this study, we investigated the factors determining the appropriate VCM dosing schedule in neonates, especially premature infants. METHODS: The VCM dosage and trough concentrations were retrospectively investigated from the initial treatment to maintenance therapy in neonatal intensive care unit patients who underwent therapeutic drug monitoring. We examined the average single-administration VCM dosage during maintenance therapy. We then compared the actual VCM dose with that calculated using an index comprising six items that influence the VCM daily dose (postnatal age, gestational age, BW, serum creatinine level, urine output, and lactate level). RESULTS: Twenty premature infants were included. The average BW of patients at the initial VCM administration was 975 g. During maintenance therapy, the average VCM dose was 8.4 mg/kg, and the median trough concentration was 12.4 µg/mL. When we applied the six-item index, 18 of 20 patients (90%) had concordant results between the actual VCM dosing schedule and the VCM calculated using the index. CONCLUSIONS: The average VCM dose and six-item index can facilitate the transition from the initial VCM dose to an appropriate dose in many cases and contribute to early treatment in low-birthweight infants with more variable BW, distribution volumes, and renal function. In conclusion, our six-item index may help standardize VCM administration in premature infants.
Asunto(s)
Antibacterianos , Vancomicina , Monitoreo de Drogas , Humanos , Lactante , Recién Nacido , Unidades de Cuidado Intensivo Neonatal , Estudios RetrospectivosRESUMEN
BACKGROUND/AIM: We examined the inhibitory effects of both glyoxalase 1 (GLO 1) and protein kinase C (PKC)λ in aldehyde dehydrogenase 1 (ALDH1)-positive breast cancer stem cells (CSCs). MATERIALS AND METHODS: Breast cancer genomics datasets (TCGA, n=593; METABRIC, n=1904) were downloaded and statistically analyzed. The effects of GLO 1 and PKCλ on trypan blue staining and tumor-sphere formation by ALDH1high cells derived from triple negative breast cancer (TNBC) and basal-like breast cancer were examined. RESULTS: GLO 1high, PKCλhigh, and ALDH1A3high tumors were enriched in stage I/II/III/IV samples, associated with the HER2 and TNBC subtypes according to receptor status, and associated with the HER2-enriched and basal-like subtypes according to PAM50. Inhibition of either GLO 1 (TLSC702) or PKCλ (ANF) suppressed tumor-sphere formation and enhanced death in ALDH1high cells. TLSC702 also effectively inhibited tumor-sphere formation and induced death in PKCλ knockout ALDH1high cells. CONCLUSION: GLO 1 and PKCλ are important for the survival of ALDH1-positive breast CSCs, and may represent potential therapeutic targets for the treatment of ALDH1-positive breast CSCs.
Asunto(s)
Familia de Aldehído Deshidrogenasa 1/metabolismo , Neoplasias de la Mama/metabolismo , Isoenzimas/metabolismo , Lactoilglutatión Liasa/metabolismo , Células Madre Neoplásicas/metabolismo , Proteína Quinasa C/metabolismo , Familia de Aldehído Deshidrogenasa 1/genética , Biomarcadores de Tumor , Neoplasias de la Mama/etiología , Neoplasias de la Mama/patología , Línea Celular Tumoral , Supervivencia Celular , Femenino , Citometría de Flujo , Perfilación de la Expresión Génica , Humanos , Estadificación de Neoplasias , Células Madre Neoplásicas/patología , TranscriptomaRESUMEN
In Japan, rebamipide (RB) mouthwash (RB-MW) for oral mucositis induced by cancer chemotherapy has been prepared using in-hospital formulation. Usually, RB-MW is prepared by dispersing crushed commercial RB tablets in the dispersion medium; however, uniformity is difficult to obtain due to low solubility. The current study aims is to prepare homogenously dispersed formulations using the fine particles of crushed tablets by a method that is convenient for hospital use. Commercial RB tablets were pre-milled at different milling times as "RB-Ts". A ground mixture was then prepared by co-grinding the RB-Ts with HPC-L or PVP K30 via a benchtop ball milling machine (MM400). The physicochemical properties of samples were evaluated for PXRD, FTIR, turbidity, particle size, and solubility. Although the milling of RB tablets decreased the crystallinity, the length of milling time did not affect them. In contrast, grinding using MM400 significantly decreased RB crystallinity; their PXRD patterns showed a halo, suggesting the amorphization of RB crystals by grinding. Although solubility and turbidity seemed to be affected by the type of polymer rather than the particle size, every ground mixture showed high dispersibility. Thus, grinding the RB-Ts with polymers appeared to be the most promising way to obtain stable dispersion as an in-hospital formulation.
RESUMEN
BACKGROUND: Clonidine hydrochloride is used to treat sedative agent withdrawals, malignant hypertension, and anesthesia complications. Clonidine is also prescribed off-label to pediatric patients at a dose of 1 µg/kg. The commercially available enteral form of clonidine, Catapres® tablets, is often compounded into a powder form by pharmacists to achieve dosage adjustments for administration to pediatric patients. However, the stability and quality of compounded clonidine powder have not been verified. The objectives of this study were to formulate a 0.2 mg/g oral clonidine hydrochloride powder and assess the stability and physical properties of this compounded product in storage. METHODS: A 0.2 mg/g clonidine powder was prepared by adding lactose monohydrate to crushed and filtrated clonidine tablets. The powder was stored in polycarbonate amber bottles or coated paper packages laminated with cellophane and polyethylene. The stability of clonidine at 25 °C ± 2 °C and 60% ± 5% relative humidity was examined over a 120-d period in "bottle (closed)," "bottle (in use)," and "laminated paper" storage conditions. Drug dissolution and powder X-ray diffraction analysis were conducted to assess physicochemical stabilities. Validated liquid chromatography-diode array detection was used to detect and quantify clonidine and its degradation product, 2,6-dichloroaniline (2,6-DCA). RESULTS: Clonidine content was maintained between 90.0 and 110.0% of the initial contents in all packaging and storage conditions. After 120 d of storage, 2,6-DCA was not detected, and no crystallographic and dissolution changes were observed. CONCLUSIONS: Compounded clonidine powder stability was maintained for 120 d at 25 °C ± 2 °C and 60% ± 5% relative humidity. This information may contribute to the management of clonidine compounded powder in community and hospital pharmacies in Japan.
RESUMEN
Hydrocortisone has been utilized in the management of adrenal insufficiency. For pediatric patients, the commercially available enteral form of hydrocortisone tablets (Cortoril®) is administered in powder form after being compounded by a pharmacist. However, the stability and quality of compounded hydrocortisone powder have not been verified. In this study, we formulated a 20 mg/g oral hydrocortisone powder by adding lactose monohydrate to crushed and filtered hydrocortisone tablets and assessed the stability and physical properties of this compounded product in polycarbonate amber bottles or coated paper packages laminated with cellophane and polyethylene. Stability was examined over 120 days in three storage conditions: closed bottle, in-use bottle, and laminated paper. Drug dissolution and powder X-ray diffraction analysis were conducted to assess its physicochemical stabilities. Validated liquid chromatography-diode array detection was used to detect and quantify hydrocortisone and its degradation products. Although impurity B (cortisone) and G (hydrocortisone-21-aldehyde) were found after 120 days of storage, no crystallographic and dissolution changes were noted. Hydrocortisone content was maintained between 90% and 110% of initial contents for 120 days at 25 ± 2 °C and 60 ± 5% relative humidity in all packaging conditions.
RESUMEN
Cancer cells upregulate the expression levels of glycolytic enzymes in order to reach the increased glycolysis required. One such upregulated glycolytic enzyme is glyoxalase 1 (GLO 1), which catalyzes the conversion of toxic methylglyoxal to nontoxic S-D-lactoylglutathione. Protein kinase Cλ (PKCλ) is also upregulated in various types of cancer and is involved in cancer progression. In the present study, the association between enhanced glycolysis and PKCλ in breast cancer was investigated. In human breast cancer, high GLO 1 expression was associated with high PKCλ expression at the protein (P<0.01) and mRNA levels (P<0.01). Furthermore, Wilcoxon and Cox regression model analysis revealed that patients with stage III-IV tumors with high GLO 1 and PKCλ expression had poor overall survival compared with patients expressing lower levels of these genes [P=0.040 (Gehan-Breslow generalized Wilcoxon test) and P=0.031 (hazard ratio, 2.36; 95% confidence interval, 1.08-5.16), respectively]. Treatment of MDA-MB-157 and MDA-MB-468 human basal-like breast cancer cells with TLSC702 (a GLO 1 inhibitor) and/or aurothiomalate (a PKCλ inhibitor) reduced both cell viability and tumor-sphere formation. These results suggested that GLO 1 and PKCλ were cooperatively involved in cancer progression and contributed to a poor prognosis in breast cancer. In conclusion, GLO 1 and PKCλ serve as potentially effective therapeutic targets for treatment of late-stage human breast cancer.
RESUMEN
The solubility of a drug is higher when it is in an amorphous form than when it is in a crystalline form. To enhance the solubility of ibuprofen (IBU), a poorly water-soluble drug, we attempted to adsorb IBU onto spherical porous calcium silicate (Florite® PS300, PS300) in two ways: the evaporation (EV) and sealed heating (SH) methods. The crystallinity of the samples was evaluated using powder X-ray diffraction analysis (PXRD) and differential scanning calorimetry (DSC). The molecular interaction between IBU and PS300 was evaluated with FTIR. In addition, the dissolution behavior of IBU in the samples was assessed by the dissolution test. Based on the results of the PXRD and DSC measurements, both methods allowed adsorption of IBU onto PS300, and IBU was amorphized. Based on the FTIR observations, in the SH or EV mixtures containing 10% and 30% IBU, respectively, it seemed that the IBU molecules intermolecularly interacted with calcium molecules as the main component of PS300. Improvement in the solubility of IBU was observed with both methods; however, the dissolution rate of IBU from samples prepared via SH was higher than that from EV, or of IBU crystals. Collectively, our findings indicate that the petal-like structure of PS300, which has a spherical shape and good flowability, is an effective tool for adsorbing IBU onto PS300 via SH.
RESUMEN
In clinical practice, for elderly or pediatric patients who have difficulty swallowing, solid dosage forms such as tablets or capsules are crushed or unsealed, prepared as powder forms, and often administered as suspensions. However, because their dispersibility is poor, aggregation or precipitation occurs readily. Once precipitation and deposition happen, redispersion is difficult, which can limit patient and caretaker drug adherence. In this study, we attempted to prepare nanoparticles as a hospital formulation by a benchtop wet-milling method to obtain a suspension with high dispersibility. This is the first study to apply the wet-milling method to prepare the hospital formulation. We chose cefditoren pivoxil (CDTR-PI) as an experimental active pharmaceutical ingredient. CDTR-PI crystals were physically mixed with various water-soluble polymers such as polyvinylpyrrolidone, polyethylene oxide, hydroxypropyl cellulose, or hypromellose and wet-milled with a surface-active agent (sodium lauryl sulfate) under different conditions. The mean particle diameter of most of the samples was less than 200 nm. In FTIR spectra of ground samples, peak shifts suggesting inter- or intramolecular interactions between CDTR-PI and the other additive agents were not observed. Besides, the nanoparticle suspension had favorable dispersibility, as determined using a dispersion stability analyzer. Providing a suspension with high dispersibility makes dispense with the resuspension, the patient's medication adherence would improve. These results show that suspended liquid formulations of active pharmaceutical ingredients could be obtained by the simple wet-milling method as hospital formulations.
RESUMEN
Hyaluronic acid (HA) has been known to play an important role in wound healing process. However, the effect of molecular weight (MW) of exogenously administered HA on the wound healing process has not been fully understood. In this study, we investigated HA with different MWs on wound healing process using human epidermal keratinocytes and dermal fibroblasts. Cell proliferation and migration ability were assessed by water soluble tetrazolium (WST) assay and wound scratch assay. We examined the effect of HA addition in a full-thickness wound model in mice and the gene expression related to wound healing. Proliferation and migration of HaCaT cells increased with the increase of MW and concentration of HA. Interleukin (IL-1ß), IL-8 and vascular endothelial growth factor (VEGF) as well as matrix metalloproteinase (MMP)-9 and MMP-13 were significantly upregulated by high molecular weight (HMW) HA in keratinocytes. Together with VEGF upregulation and the observed promotion of HaCaT migration, HA with the MW of 2290 kDa may hold potential to improve re-epithelialization, a critical obstacle to heal chronic wounds.
RESUMEN
AIM: To evaluate the efficacy of a novel hydrogel sheet in preventing postoperative pancreatic fistula (POPF). BACKGROUND: Postoperative pancreatic fistula is a life-threatening complication. As no study has reported the use of hydrogel sheets in preventing POPF, their effectiveness for that purpose remains unclear. METHODS: A novel hydrogel sheet made of polyvinyl alcohol (PVA) was prepared by the freeze-thaw method. The pancreatic ducts and surrounding pancreatic parenchyma of rats were transected to induce a pancreatic fistula. Next, the sheet was attached to the transection site. Ascitic fluid amylase and lipase concentrations were measured. Neoveil® , a nonwoven polyglycolic acid (PGA) felt, is already clinically used as an absorbable reinforcing material at pancreatic transection sites. Neoveil® was used for comparison, as was VIEWGEL® , which is marketed as a wound dressing. RESULTS: The hydrogel sheet remained in place 48 hours postoperatively. The ascitic amylase concentrations in the control, VIEWGEL® -treated, Neoveil® -treated, and hydrogel-treated rats, respectively, were 4992.4 ± 5355.7, 1068.4 ± 269.1, 730.2 ± 425.2, and 303.1 ± 240.1 IU/L; the ascitic lipase concentrations were 2279.8 ± 3395.2, 169.5 ± 100.6, 90.4 ± 71.0, and 86.8 ± 59.8 IU/L. The ascitic amylase and lipase levels were significantly lower in the hydrogel group than in the other groups (P < .05). CONCLUSIONS: This novel hydrogel sheet effectively prevents pancreatic fistulas and has promising clinical application potential.
Asunto(s)
Hidrogeles , Fístula Pancreática , Amilasas , Animales , Páncreas/cirugía , Conductos Pancreáticos , Fístula Pancreática/etiología , Fístula Pancreática/prevención & control , Complicaciones Posoperatorias , RatasRESUMEN
Solubility is an important physicochemical property affecting drug bioavailability. One approach to improve drug solubility is using amorphous formulations, which can improve solubility by up to a 1000-fold. Herein, amorphous curcumin (CUR) and amorphous solid dispersions (SDs) consisting of CUR, hydroxypropyl cellulose (HPC) and/or sodium dodecyl sulfate (SDS) were developed using vibrational ball milling. The resulting ground mixtures (GMs) were characterized using powder X-ray diffractometry, Fourier transform infrared spectroscopy, differential scanning calorimetry and a dissolution test. The 60-min GM containing 90% HPC significantly increased the drug solubility. Presence of SDS in the GMs containing 90% HPC reduced the grinding duration from 60 min to 30 min in forming a ground SD that significantly increased the CUR dissolution rate. This amorphous state was stable for 30 days when stored at 40 °C/RH 75%.