Iron-carbohydrate complexes treating iron anaemia: Understanding the nano-structure and interactions with proteins through orthogonal characterisation.

Intravenous (IV) iron-carbohydrate complexes are widely used nanoparticles (NPs) to treat iron deficiency anaemia, often associated with medical conditions such as chronic kidney disease, heart failure and various inflammatory conditions. Even though a plethora of physicochemical characterisation data and clinical studies are available for these products, evidence-based correlation between physicochemical properties of iron-carbohydrate complexes and clinical outcome has not fully been elucidated yet. Studies on other metal oxide NPs suggest that early interactions between NPs and blood upon IV injection are key to understanding how differences in physicochemical characteristics of iron-carbohydrate complexes cause variance in clinical outcomes. We therefore investigated the core-ligand structure of two clinically relevant iron-carbohydrate complexes, iron sucrose (IS) and ferric carboxymaltose (FCM), and their interactions with two structurally different human plasma proteins, human serum albumin (HSA) and fibrinogen, using a combination of cryo-scanning transmission electron microscopy (cryo-STEM), x-ray diffraction (XRD), small-angle x-ray scattering (SAXS) and small-angle neutron scattering (SANS). Using this orthogonal approach, we defined the nano-structure, individual building blocks and surface morphology for IS and FCM. Importantly, we revealed significant differences in the surface morphology of the iron-carbohydrate complexes. FCM shows a localised carbohydrate shell around its core, in contrast to IS, which is characterised by a diffuse and dynamic layer of carbohydrate ligand surrounding its core. We hypothesised that such differences in carbohydrate morphology determine the interaction between iron-carbohydrate complexes and proteins and therefore investigated the NPs in the presence of HSA and fibrinogen. Intriguingly, IS showed significant interaction with HSA and fibrinogen, forming NP-protein clusters, while FCM only showed significant interaction with fibrinogen. We postulate that these differences could influence bio-response of the two formulations and their clinical outcome. In conclusion, our study provides orthogonal characterisation of two clinically relevant iron-carbohydrate complexes and first hints at their interaction behaviour with proteins in the human bloodstream, setting a prerequisite towards complete understanding of the correlation between physicochemical properties and clinical outcome.

Structural and mechanical anisotropy in plant-based meat analogues.

The rising demand for plant-based meat analogues as alternatives to animal products has sparked interest in understanding the complex interplay between their structural and mechanical properties. The ability to manipulate the processing parameters and protein blend composition offers fundamental insights into the texturization process and holds economic and sustainable implications for the food industry. Consequently, the correlation between mechanical and structural properties in meat analogues is crucial for achieving consumer satisfaction and successful market penetration, providing comprehensive insights into the textural properties of meat analogues and their potential to mimic traditional animal produce. Our study delves into the relationship between structural and mechanical anisotropy in meat analogues produced using high moisture extrusion cooking, which involves blending protein, water, and other ingredients, followed by a controlled heating and cooling process to achieve a fibrous texture akin to traditional meat. By employing techniques such as scanning small-angle X-ray scattering, scanning electron microscopy, and mechanical testing we investigate the fibrous structure and its impact on the final texture of meat analogues. We show that textural and structural anisotropy is reflected on the mechanical properties measured using tensile and dynamic mechanical techniques. It is demonstrated that the calculated anisotropy indexes, a measure for the degree of textural and structural anisotropy, increase with increasing protein content. Our findings have significant implications for the understanding and development of plant-based meat analogues with structures that can be tuned to closely resemble the animal meat textures of choice, thereby enabling consumers to transition to more sustainable dietary choices while preserving familiar eating habits.

Food amyloid fibrils are safe nutrition ingredients based on in-vitro and in-vivo assessment.

Food protein amyloid fibrils have superior technological, nutritional, sensorial, and physical properties compared to native monomers, but there is as yet insufficient understanding of their digestive fate and safety for wide consumption. By combining SDS-PAGE, ELISA, fluorescence, AFM, MALDI-MS, CD, microfluidics, and SAXS techniques for the characterization of ß-lactoglobulin and lysozyme amyloid fibrils subjected to in-vitro gastrointestinal digestion, here we show that either no noticeable conformational differences exist between amyloid aggregates and their monomer counterparts after the gastrointestinal digestion process (as in ß-lactoglobulin), or that amyloid fibrils are digested significantly better than monomers (as in lysozyme). Moreover, in-vitro exposure of human cell lines and in-vivo studies with C. elegans and mouse models, indicate that the digested fibrils present no observable cytotoxicity, physiological abnormalities in health-span, nor accumulation of fibril-induced plaques in brain nor other organs. These extensive in-vitro and in-vivo studies together suggest that the digested food amyloids are at least equally as safe as those obtained from the digestion of corresponding native monomers, pointing to food amyloid fibrils as potential ingredients for human nutrition.

Interfacial Electrostatic Self-Assembly of Amyloid Fibrils into Multifunctional Protein Films.

Amyloid fibrils have generated steadily increasing traction in the development of natural and artificial materials. However, it remains a challenge to construct bulk amyloid films directly from amyloid fibrils due to their intrinsic brittleness. Here, a facile and general methodology to fabricate macroscopic and tunable amyloid films via fast electrostatic self-assembly of amyloid fibrils at the air-water interface is introduced. Benefiting from the excellent templating properties of amyloid fibrils for nanoparticles (such as conductive carbon nanotubes or magnetic Fe3 O4 nanoparticles), multifunctional amyloid films with tunable properties are constructed. As proof-of-concept demonstrations, a magnetically oriented soft robotic swimmer with well-confined movement trajectory is prepared. In addition, a smart magnetic sensor with high sensitivity to external magnetic fields is fabricated via the combination of the conductive and magnetic amyloid films. This strategy provides a convenient, efficient, and controllable approach for the preparation of amyloid-based multifunctional films and related smart devices.

Potential of curcumin-loaded cubosomes for topical treatment of cervical cancer.

Cervical cancer is one of the most common cancers affecting women worldwide. There are an estimated 570.000 new cases of cervical cancer each year and conventional treatments can cause severe side effects. In this work, we developed a platform for vaginal administration of lipophilic drugs for cervical cancer treatment. We formulated mucoadhesive cubosomes for the delivery of curcumin, a lipophilic drug for cervical cancer treatment, to increase its bioavailability and local absorption. This study tests the use of cubosomes for vaginal drug administration and assesses their potential efficiency using the CAM (chick embryo chorioallantoic membrane) model. SAXS (small-angle X-ray scattering), cryo-TEM (cryo-transmission electron microscopy), and dynamic light scattering (DLS) were employed to characterise the system. With ex vivo permeation and retention studies, we find that the curcumin released from our system is retained in the vaginal mucosa. In vitro cytotoxicity assay and cellular uptake showed an increased cytotoxic effect of curcumin against HeLa cell line when incorporated into the cubosomes. The curcumin-loaded cubosomes also demonstrated an antiangiogenic effect evaluated in vivo by the CAM model.

Hybrid Theranostic Cubosomes for Efficient NIR-Induced Photodynamic Therapy.

In recent years, lipid bicontinuous cubic liquid-crystalline nanoparticles known as cubosomes have been under investigation because of their favorable properties as drug nanocarriers useful for anticancer treatments. Herein, we present organic/inorganic hybrid, theranostic cubosomes stabilized in water with a shell of alternate layers of chitosan, single strand DNA (model genetic material for potential gene therapy), and folic acid-chitosan conjugate (the outmost layer), coencapsulating up-converting Er3+ and Yb3+ codoped NaYF4 nanoparticles and daunorubicin. The latter acts as a chemotherapeutic drug of photosensitizing activity, while up-converting nanoparticles serve as energy harvester and diagnostic agent. Cellular uptake and NIR-induced photodynamic therapy were evaluated in vitro against human skin melanoma (MeWo) and ovarian (SKOV-3) cancer cells. Results evidenced the preferential uptake of the theranostic cubosomes in SKOV-3 cells in comparison to uptake in MeWo cells, and this effect was enhanced by the folic acid functionalization of the cubosomes surface. Nanocarriers coloaded with the hybrid fluorophores exhibited a superior NIR-induced photodynamic activity, also confirmed by the improved mitochondrial activity and the most affecting f-actin fibers of cytoskeleton. Similar results, but with higher photocytotoxicity, were detected when folic acid-functionalized cubosomes were incubated with SKOV-3 cells. Taken on the whole, these results prove these hybrid cubosomes are good candidates for the photodynamic treatment of tumor lesions.

Polysaccharide-reinforced amyloid fibril hydrogels and aerogels.

ß-Lactoglobulin amyloid fibrils are bio-colloids of high interest in many fields (e.g. water purification, cell growth, drug delivery and sensing). While the mechanical properties of pure amyloid fibril gels meet the needs of some applications, mechanical fragility often hinders a wider usage basin. In this work, we present a simple and sustainable approach for reinforcing amyloid fibril hydrogels and aerogels, upon the diffusion of polysaccharides (low-acetylated Gellan Gum and κ-carrageenan) inside their mesh. The formed hybrid materials show enhanced resistance upon compression, without any loss of the exquisite surface reactivity of the amyloid fibrils. The proposed approach can pave the way for designing composite materials that are both highly functional and environmentally friendly.

An antiviral trap made of protein nanofibrils and iron oxyhydroxide nanoparticles.

Minimizing the spread of viruses in the environment is the first defence line when fighting outbreaks and pandemics, but the current COVID-19 pandemic demonstrates how difficult this is on a global scale, particularly in a sustainable and environmentally friendly way. Here we introduce and develop a sustainable and biodegradable antiviral filtration membrane composed of amyloid nanofibrils made from food-grade milk proteins and iron oxyhydroxide nanoparticles synthesized in situ from iron salts by simple pH tuning. Thus, all the membrane components are made of environmentally friendly, non-toxic and widely available materials. The membrane has outstanding efficacy against a broad range of viruses, which include enveloped, non-enveloped, airborne and waterborne viruses, such as SARS-CoV-2, H1N1 (the influenza A virus strain responsible for the swine flu pandemic in 2009) and enterovirus 71 (a non-enveloped virus resistant to harsh conditions, such as highly acidic pH), which highlights a possible role in fighting the current and future viral outbreaks and pandemics.

Sustainable Removal of Microplastics and Natural Organic Matter from Water by Coagulation-Flocculation with Protein Amyloid Fibrils.

Water contamination is a global threat due to its damaging effects on the environment and human health. Water pollution by microplastics (MPs), dissolved natural organic matter (NOM), and other turbid particles is ubiquitous in water treatment. Here, we introduce lysozyme amyloid fibrils as a novel natural bio-flocculant and explore their ability to flocculate and precipitate the abovementioned undesired colloidal objects. Thanks to their positively charged surface in a very broad range of pH, lysozyme amyloid fibrils show an excellent turbidity removal efficiency of 98.2 and 97.9% for dispersed polystyrene MPs and humic acid (HA), respectively. Additionally, total organic carbon measurements confirm these results by exhibiting removal efficiencies of 93.4 and 61.9% for purifying water from dispersed MPs and dissolved HA, respectively. The comparison among amyloid fibrils, commercial flocculants (FeCl3 and polyaluminumchloride), and native lysozyme monomers points to the superiority of amyloid fibrils at the same dosage and sedimentation time. Furthermore, the turbidity of pristine and MP-spiked wastewater and lake water decreased after the treatment by amyloid fibrils, validating their coagulation-flocculation performance under natural conditions. All these results demonstrate lysozyme amyloid fibrils as an appropriate natural bio-flocculant for removing dispersed MPs, NOM, and turbid particles from water.

Amyloid Fibril-Templated High-Performance Conductive Aerogels with Sensing Properties.

Amyloid fibrils have garnered increasing attention as viable building blocks for functional material design and synthesis, especially those derived from food and agricultural wastes. Here, amyloid fibrils generated from ß-lactoglobulin, a by-product from cheese industries, have been successfully used as a template for the design of a new class of high-performance conductive aerogels with sensing properties. These mechanically stable aerogels with three-dimensional porous architecture have a large surface area (≈159 m2 g-1), low density (≈0.044 g cm-3), and high electrical conductivity (≈0.042 S cm-1). A pressure sensing device is developed from these aerogels based on their combined electrical conductivity and compressible properties. More interestingly, these aerogels can be employed to design novel enzyme sensors by exploiting the proteinaceous nature of amyloid fibrils. This study expands the scope of structured amyloid fibrils as scaffolds for in situ polymerization of conducting polymers, offering new opportunities to design materials with multiple functionalities.

Self-Winding Gelatin-Amyloid Wires for Soft Actuators and Sensors.

The origin of self-winding mechanisms in plants' tendrils has fascinated scientists for centuries and continues to inspire developments in material science and nanotechnology. Here, bioinspired water-responsive wires that replicate these mechanisms, including the formation of coils and chiral perversions, are presented. A right-handed gelatin matrix is loaded with rigid left-handed amyloid fibrils and roll-dry-spun into wires in which self-winding activation emerges from simultaneous bending and twisting deformations. Wire bending is a consequence of amyloid fibrils' concentration and distribution within the wire, whereas twisting is controlled by amyloid fibrils' orientation. The resultant wires can be functionalized by organic molecules and inorganic nanoparticles, and potential applications in magnetic actuators and sensors are demonstrated. The simple fabrication method and the remarkable spontaneous self-winding response of these gelatin-amyloid wires exemplify how biomaterials based on mixed proteins have striking potential to develop advanced and tunable properties that can serve robotics, soft machines, and engineering systems.

Structure-property relationships of cellulose nanofibril hydro- and aerogels and their building blocks.

As abundant and renewable materials with excellent mechanical and functional properties, cellulose nanomaterials are utilized in advanced structural, optical and electronic applications. However, in order to further improve and develop new cellulose nanomaterials, a better understanding of the interplay between the self-assembled materials and their building blocks is crucial. This paper describes the structure-property relationships between cellulose nanofibrils (CNFs) and their resulting self-assembled structures in the form of hydrogels and aerogels. Rheological experiments revealed that the transition from viscous to elastic state with the corresponding evolution of the properties of the CNF dispersion depends on the aspect ratio and can be described in terms of the dynamic overlap concentration. The elastic shear modulus was dependent on the aspect ratio at very low CNF concentrations, reaching a plateau, where only the concentration of CNFs was relevant. This transition point in shear modulus was exploited to determine the mesh size of the fibril network, which was found to be in excellent agreement with predictions from scaling arguments. These findings highlight the possibility to tune the self-assembled materials response directly from the bottom-up by the CNF particle structure and thus, suggest new assembly routes starting directly from the CNF design.

Amyloid Fibrils Aerogel for Sustainable Removal of Organic Contaminants from Water.

Water contamination by organic pollutants is ubiquitous and hence a global concern due to detrimental effects on the environment and human health. Here, it is demonstrated that amyloid fibrils aerogels are ideal adsorbers for removing organic pollutants from water. To this end, amyloid fibrils prepared from ß-lactoglobulin, the major constituent of milk whey protein, are used as building blocks for the fabrication of the aerogels. The adsorption of Bentazone, Bisphenol A, and Ibuprofen, as model pollutants, is evaluated under quasi-static conditions, without use of energy or pressure. Through adsorption by amyloid fibrils aerogel, excellent removal efficiencies of 92%, 78%, and 98% are demonstrated for Bentazone, Bisphenol A, and Ibuprofen, respectively. Furthermore, the maximum adsorption capacity of amyloid fibrils aerogel for Bentazone, Bisphenol A, and Ibuprofen is 54.2, 50.6, and 69.6 mg g-1 , respectively. To shed light on the adsorption equilibrium process, adsorption isotherms, binding constants, saturation limits, and the effect of pH are evaluated. Finally, the regeneration of the aerogel over three consecutive cycles is studied, exhibiting high reusability with no significant changes in its removal performance. These results point at amyloid fibrils aerogels as a sustainable, efficient, and inexpensive technology for alleviating the ubiquitous water contamination by organic pollutants.

Drying of African leafy vegetables for their effective preservation: the difference in moisture sorption isotherms explained by their microstructure.

The problem of malnutrition and nutrition deficiency, as well as droughts that lead to reduction in food supply and starvation, is well documented for Sub-Saharan Africa. Reducing post-harvest losses of five species of African leafy vegetables (ALVs) by preservation through drying is studied herein. Energy efficient gentle drying conditions using superabsorbent polymers and a temperature of 40 °C were shown to preserve most leaf structures and vitamins. The microbial safe moisture content of the ALVs was found to be ≤14% dry basis. Dried Slender Leaf and Nightshade leaves could be rehydrated to the equilibrium moisture content of fresh leaves upon dry storage, while it was not possible for Jute Mallow, Cowpea and Amaranthus. This was attributed to different palisade parenchyma cell lengths. An increased amount of starch granules as observed in the microstructure of Cowpea and Nightshade leaves is suggested to explain their fibrous texture upon cooking. These results show that the ALVs can be effectively preserved using the same drying method and that this can be used to fight micro-nutrient deficiencies during droughts.

LDL-mimetic lipid nanoparticles prepared by surface KAT ligation for in vivo MRI of atherosclerosis.

Low-density lipoprotein (LDL)-mimetic lipid nanoparticles (LNPs), decorated with MRI contrast agents and fluorescent dyes, were prepared by the covalent attachment of apolipoprotein-mimetic peptide (P), Gd(iii)-chelate (Gd), and sulforhodamine B (R) moieties on the LNP surface. The functionalized LNPs were prepared using the amide-forming potassium acyltrifluoroborate (KAT) ligation reaction. The KAT groups on the surface of LNPs were allowed to react with the corresponding hydroxylamine (HA) derivatives of P and Gd to provide bi-functionalized LNPs (PGd-LNP). The reaction proceeded with excellent yields, as observed by ICP-MS (for B and Gd amounts) and MALDI-TOF-MS data, and did not alter the morphology of the LNPs (mean diameter: ca. 50 nm), as shown by DLS and cryoTEM analyses. With the help of the efficient KAT ligation, a high payload of Gd(iii)-chelate on the PGd-LNP surface (ca. 2800 Gd atoms per LNP) was successfully achieved and provided a high r 1 relaxivity (r 1 = 22.0 s-1 mM-1 at 1.4 T/60 MHz and 25 °C; r 1 = 8.2 s-1 mM-1 at 9.4 T/400 MHz and 37 °C). This bi-functionalized PGd-LNP was administered to three atherosclerotic apoE -/- mice to reveal the clear enhancement of atherosclerotic plaques in the brachiocephalic artery (BA) by MRI, in good agreement with the high accumulation of Gd in the aortic arch as shown by ICP-MS. The parallel in vivo MRI and ex vivo studies of whole mouse cryo-imaging were performed using triply functionalized LNPs with P, Gd, and R (PGdR-LNP). The clear presence of atherosclerotic plaques in BA was observed by ex vivo bright field cryo-imaging, and they were also observed by high emission fluorescent imaging. These directly corresponded to the enhanced tissue in the in vivo MRI of the identical mouse.

Amyloid hybrid membranes for bacterial & genetic material removal from water and their anti-biofouling properties.

Water scarcity and contamination by biological pollutants are global challenges that significantly affect public health. Reverse osmosis, nanofiltration and ultrafiltration technologies are very effective for the elimination of pathogens and most contaminants but associated with considerable capital and operating costs, high energy consumption and the use of chlorinated chemicals to suppress membrane fouling. Additionally, the pressure needed by these techniques may disrupt the pathogenic microbial cell membranes, causing the release of genetic material (fragments of DNA, RNA and plasmids) into the water. Here, we introduce the simultaneous removal of both bacteria and associated genetic material using amyloid hybrid membranes, via a combined adsorption and size exclusion mechanism. Amyloid hybrid membranes can remove upto and beyond 99% of the genetic material by adsorption, where amyloid fibrils act as the primary adsorbing material. When the same membranes are surface-modified using chitosan, the anti-biofouling performance of the membranes improved significantly, with a bacterial removal efficiency exceeding 6 log.

Selective and Efficient Removal of Fluoride from Water: In Situ Engineered Amyloid Fibril/ZrO2 Hybrid Membranes.

We report a new strategy for efficient removal of F- from contaminated water streams, and it relies on carbon hybrid membranes made of amyloid fibril/ZrO2 nanoparticles (<10 nm). These membranes exhibit superior selectivity for F- against various competitive ions, with a distribution coefficient (Kd ) as high as 6820 mL g-1 , exceeding commercial ion-exchange resins (IRA-900) by 180 times and outdoing the performance of most commercial carbon-activated aluminum membranes. At both low and high (ca. 200 mg L-1 ) F- concentrations, the membrane efficiency exceeds 99.5 % removal. For real untreated municipal tap water (ca. 2.8 mg L-1 ) under continuous operating mode, data indicates that about 1750 kg water m-2 membrane can be treated while maintaining drinking water quality, and the saturated membranes can be regenerated and reused several times without decrease in performance. This technology is promising for mitigating the problem of fluoride water contamination worldwide.

Lipidic Mesophase-Embedded Palladium Nanoparticles: Synthesis and Tunable Catalysts in Suzuki-Miyaura Cross-Coupling Reactions.

Lipidic cubic phases (LCPs) can reduce Pd2+ salts to palladium nanoparticles (PdNPs) of ∼5 nm size in their confined water channels under mild conditions. The resulting PdNP-containing LCPs were used as nanoreactor scaffolds to catalyze Suzuki-Miyaura cross-coupling reactions in the aqueous channels of the mesophase. To turn on catalysis, PdNP-containing LCPs were activated by swelling the aqueous channels of the lipidic framework, thereby enabling diffusion of the water-soluble substrates to the catalysts. The mesophases play a threefold role: they act as reducing agents for Pd2+, as limiting templates for their growth, and as support. The system was characterized and investigated by small-angle X-ray scattering (SAXS), cryo-transmission electron microscopy, dynamic light scattering, and nuclear magnetic resonance. Bulk LCPs and three dispersed palladium/lipid hybrid nanoparticle types were applied in the catalysis. The latter-liposomes, hexosomes, and cubosomes-can be obtained by design through combination of lipids and additives. The Suzuki-Miyaura cross-coupling of 5-iodo-2'-deoxyuridine and phenylboronic acid was used as a model reaction to study these systems. Bulk Pd-LCPs deliver the Suzuki-Miyaura product in 24 h in conversions up to 98% at room temperature, whereas with palladium/lipid dispersions at 40 °C, 68% of the starting material was transformed to the product after 72 h.

Rapid Structure Determination of Microcrystalline Molecular Compounds Using Electron Diffraction.

Chemists of all fields currently publish about 50 000 crystal structures per year, the vast majority of which are X-ray structures. We determined two molecular structures by employing electron rather than X-ray diffraction. For this purpose, an EIGER hybrid pixel detector was fitted to a transmission electron microscope, yielding an electron diffractometer. The structure of a new methylene blue derivative was determined at 0.9 Šresolution from a crystal smaller than 1×2 µm2 . Several thousand active pharmaceutical ingredients (APIs) are only available as submicrocrystalline powders. To illustrate the potential of electron crystallography for the pharmaceutical industry, we also determined the structure of an API from its pill. We demonstrate that electron crystallography complements X-ray crystallography and is the technique of choice for all unsolved cases in which submicrometer-sized crystals were the limiting factor.

Controlling Supramolecular Chiral Nanostructures by Self-Assembly of a Biomimetic ß-Sheet-Rich Amyloidogenic Peptide.

Squid sucker ring teeth (SRT) have emerged as a promising protein-only, thermoplastic biopolymer with an increasing number of biomedical and engineering applications demonstrated in recent years. SRT is a supra-molecular network whereby a flexible, amorphous matrix is mechanically reinforced by nanoconfined ß-sheets. The building blocks for the SRT network are a family of suckerin proteins that share a common block copolymer architecture consisting of amorphous domains intervened by smaller, ß-sheet forming modules. Recent studies have identified the peptide A1H1 (peptide sequence AATAVSHTTHHA) as one of the most abundant ß-sheet forming domains within the suckerin protein family. However, we still have little understanding of the assembly mechanisms by which the A1H1 peptide may assemble into its functional load-bearing domains. In this study, we conduct a detailed self-assembly study of A1H1 and show that the peptide undergoes ß-strands-driven elongation into amyloid-like fibrils with a rich polymorphism. The nanostructure of the fibrils was elucidated by small and wide-angle X-ray scattering (SAXS and WAXS) and atomic force microscopy (AFM). The presence of His-rich and Ala-rich segments results in an amphiphilic behavior and drives its assembly into fibrillar supramolecular chiral aggregates with helical ribbon configuration in solution, with the His-rich region exposed to the solvent molecules. Upon increase in concentration, the fibrils undergo gel formation, while preserving the same mesoscopic features. This complex phase behavior suggests that the repeat peptide modules of suckerins may be manipulated beyond their native biological environment to produce a wider variety of self-assembled amyloid-like nanostructures.