RESUMEN
The present research is primarily focused on investigating the characteristics of environmentally persistent free radicals (EPFRs) generated from commonly recognized aromatic precursors, namely, 1,2-dichlorobenzene (DCB) and 2-monochlorophenol (MCP), within controlled laboratory conditions at a temperature of 230 °C, termed as DCB230 and MCP230 EPFRs, respectively. An intriguing observation has emerged during the creation of EPFRs from MCP and DCB utilizing a catalyst 5% CuO/SiO2, which was prepared through various methods. A previously proposed mechanism, advanced by Dellinger and colleagues (a conventional model), postulated a positive correlation between the degree of hydroxylation on the catalyst's surface (higher hydroxylated, HH and less hydroxylated, LH) and the anticipated EPFR yields. In the present study, this correlation was specifically confirmed for the DCB precursor. Particularly, it was observed that increasing the degree of hydroxylation at the catalyst's surface resulted in a greater yield of EPFRs for DCB230. The unexpected finding was the indifferent behavior of MCP230 EPFRs to the surface morphology of the catalyst, i.e., no matter whether copper oxide nanoparticles are distributed densely, sparsely, or completely agglomerated. The yields of MCP230 EPFRs remained consistent regardless of the catalyst type or preparation protocol. Although current experimental results confirm the early model for the generation of DCB EPFRs (i.e., the higher the hydroxylation is, the higher the yield of EPFRs), it is of utmost importance to closely explore the heterogeneous alternative mechanism(s) responsible for generating MCP230 EPFRs, which may run parallel to the conventional model. In this study, detailed spectral analysis was conducted using the EPR technique to examine the nature of DCB230 EPFRs and the aging phenomenon of DCB230 EPFRs while they exist as surface-bound o-semiquinone radicals (o-SQ) on copper sites. Various aspects concerning bound radicals were explored, including the hydrogen-bonding tendencies of o-semiquinone (o-SQ) radicals, the potential reversibility of hydroxylation processes occurring on the catalyst's surface, and the analysis of selected EPR spectra using EasySpin MATLAB. Furthermore, alternative routes for EPFR generation were thoroughly discussed and compared with the conventional model.
RESUMEN
In recent years, the emission of particles and gaseous pollutants from 3D printing has attracted much attention due to potential health risks. This study investigated the generation of environmentally persistent free radicals (EPFRs, organic free radicals stabilized on or inside particles) in total particulate matter (TPM) released during the 3D printing process. Commercially available 3D printer filaments, made of acrylonitrile-butadiene-styrene (ABS) in two different colors and metal content, ABS-blue (19.66 µg/g Cu) and ABS-black (3.69 µg/g Fe), were used for printing. We hypothesized that the metal content/composition of the filaments contributes not only to the type and number of EPFRs in TPM emissions, but also impacts the overall yield of TPM emissions. TPM emissions during printing with ABS-blue (11.28 µg/g of printed material) were higher than with ABS-black (7.29 µg/g). Electron paramagnetic resonance (EPR) spectroscopy, employed to measure EPFRs in TPM emissions of both filaments, revealed higher EPFR concentrations in ABS-blue TPM (6.23 × 1017 spins/g) than in ABS-black TPM (9.72 × 1016 spins/g). The presence of copper in the ABS-blue contributed to the formation of mostly oxygen-centered EPFR species with a g-factor of ~2.0041 and a lifetime of 98 days. The ABS-black EPFR signal had a lower g-factor of ~2.0011, reflecting the formation of superoxide radicals during the printing process, which were shown to have an "estimated tentative" lifetime of 26 days. Both radical species (EPFRs and superoxides) translate to a potential health risk through inhalation of emitted particles.
RESUMEN
Studies of the environmental fate through the interactions of particle-associated polycyclic aromatic hydrocarbons (PAHs) with environmentally persistent free radicals (EPFRs) are presented. The formation of PAHs and EPFRs typically occurs side by side during combustion-processes. The laboratory simulation studies of the model PAH molecule 1-Methylnaphthalene (1-MN) interaction with model EPFRs indicate a transformational synergy between these two pollutants due to mutual and matrix interactions. EPFRs, thorough its redox cycle result in the oxidation of PAHs into oxy-/hydroxy-PAHs. EPFRs have been shown before to produce OH radical during its redox cycle in aqueous media and this study has shown that produced OH radical can transform other PM constituents resulting in alteration of PM chemistry. In model PM, EPFRs driven oxidation process of 1-MN produced 1,4-naphthoquinone, 1-naphthaldehyde, 4-hydroxy-4-methylnaphthalen-1-one, and various isomers of (hydroxymethyl) naphthalene. Differences were observed in oxidation product yields, depending on whether EPFRs and PAHs were cohabiting the same PM or present on separate PM. This effect is attributed to the OH radical concentration gradient as a factor in the oxidation process, further strengthening the hypothesis of EPFRs' role in the PAH oxidation process. This finding is revealing new environmental role of EPFRs in a natural degradation process of PAHs. Additionally, it points to implications of such PM surface chemistry in the changing mobility of PAHs into an aqueous medium, thus increasing their bioavailability.
Asunto(s)
Contaminantes Atmosféricos , Hidrocarburos Policíclicos Aromáticos , Material Particulado/química , Radicales Libres/química , Naftalenos , Oxidación-ReducciónRESUMEN
BACKGROUND: Bangladesh is facing a dual burden of malnutrition, with high rates of undernutrition and increasing rates of overnutrition. The complex scenario of malnutrition in Bangladesh varies across different regions, making it a challenging public health concern to address. OBJECTIVES: This study analyzes the spatial and temporal dependence of underweight and overweight Bangladeshi women of reproductive age. METHODS: Nationally representative cross-sectional data from the Bangladesh Demographic and Health Surveys in 2014 and 2017-18 were utilized to study the changes in weight status in 15-49-year-old women who were either underweight or overweight. A Bayesian geo-additive regression model was used to account for non-linear and linear effects of continuous and categorical covariates and to incorporate spatial effects of geographical divisions. RESULTS: The prevalence of overweight or obese women in rural, city corporations, and other urban areas increased significantly over the four years from 2014 to 2017-18. Women in the categories 'richer' and 'richest' were more likely to be overweight or obese. Women from Sylhet were more likely to be underweight in both survey years; however, the spatial effects were significant for underweight women in Mymensingh for the year 2017-18. Women in Rajshahi and Khulna were more likely to be overweight or obese in 2014, and women from Barishal and Chittagong were more likely to be overweight in the year 2017-18. CONCLUSIONS: Underweight and overweight statuses in women vary unevenly across Bangladesh, with a substantially higher prevalence of overweight or obese women in more urbanized areas. The growing burden of overweight and obesity among Bangladeshi women should be addressed with interventions aimed at those in the reproductive age group.
Asunto(s)
Desnutrición , Hipernutrición , Femenino , Humanos , Adolescente , Adulto Joven , Adulto , Persona de Mediana Edad , Sobrepeso/epidemiología , Bangladesh/epidemiología , Delgadez/epidemiología , Estudios Transversales , Teorema de Bayes , Obesidad/epidemiología , Desnutrición/epidemiología , Hipernutrición/epidemiología , Prevalencia , Factores SocioeconómicosRESUMEN
A collection of six commercially available, 3D printer filaments were analyzed with respect to their gas-phase emissions, specifically volatile organic compounds (VOCs), during simulated fused filament fabrication (FFF). Filaments were chosen because they were advertised to contain metal particles or carbon nanotubes. During experimentation, some were found to contain other non-advertised additives that greatly influenced gas-phase emissions. Three polylactic acid (PLA) filaments containing either copper, bronze, or stainless steel particles were studied along in addition to three carbon nanotube (CNT) filaments made from PLA, acrylonitrile-butadiene-styrene (ABS), and polycarbonate (PC). The metal-additive PLA filaments were found to emit primarily lactide, acetaldehyde, and 1-chlorododecane. The presence of metal particles in the PLA is a possible cause of the increased total emissions, which were higher than any other PLA filament reported in the literature. In addition, the filament with stainless steel particles had a threefold increase in total VOCs compared to the copper and bronze particles. Two of three CNT-containing filaments emitted compounds that have not been reported before for PLA and PC. A comparison between certain emitted VOCs and their suggested maximum inhalation limits shows that printing as little as 20 g of certain filaments in a small, unventilated room can subject the user to hazardous concentrations of multiple toxic VOCs with carcinogenic properties (e.g., acetaldehyde, 1,4-dioxane, and bis(2-ethylhexyl) phthalate). The use of certain additives, whether advertised or not, should be reevaluated due to their effects on VOC emissions during 3D printing.
Asunto(s)
Contaminación del Aire Interior , Nanotubos de Carbono , Compuestos Orgánicos Volátiles , Contaminación del Aire Interior/análisis , Material Particulado , Polímeros , Compuestos Orgánicos Volátiles/análisisRESUMEN
Ambient air particulate matter (PM) and PM-associated environmentally persistent free radicals (EPFRs) have been documented to contribute to pollution-related health effects. Studies of ambient air PM potentially bear artifacts stemming from the collection methods. We have investigated the applicability of PM phytosampling (PHS) as a supplementary tool to a classic PM sampler in respect of achieving better PM chemical composition assessment (primarily organic fraction). Phytosampling is a static PM collection method relying on the particle entrapment by the plant's leaf through electrostatic forces and surface trichomes. We have investigated the differences in the EPFR and polycyclic aromatic hydrocarbon (PAH) speciation and concentration on ambient air PM for PHS and high-volume PM sampler (HVS). The advantages of PHS are easy particle recovery from the matrix, collection under natural environmental conditions, and the ability to apply a dense collection network to accurately represent spatial pollutant distribution. The experimental results show that the PHS can provide valuable speciation information, sometimes different from that observed for HVS. For PM collected by PHS, we detected the larger contribution of oxygen-centered EPFRs, different decay behavior, and more consistent PAH distribution between different PM sizes compared to the PM from HVS. These results indicate that the isolation of samples from the ambient during HVS sampling and exposure to high-volume airflow may alter the chemical composition of the samples, while the PHS method could provide details on the original speciation and concentration and be more representative of the PM surface. However, PHS cannot evaluate an absolute air concentration of PM, so it serves as an excellent supplementary tool to work in conjunction with the standard PM collection method.
Asunto(s)
Contaminantes Atmosféricos , Hidrocarburos Policíclicos Aromáticos , Contaminantes Atmosféricos/análisis , Monitoreo del Ambiente , Contaminación Ambiental , Radicales Libres/análisis , Tamaño de la Partícula , Material Particulado/análisis , Hidrocarburos Policíclicos Aromáticos/análisisRESUMEN
In the current study, electron paramagnetic resonance (EPR) spectroscopy was employed to measure environmentally persistent free radicals (EPFRs) in the total particulate matter (TPM) of mainstream and sidestream TPM of conventional cigarettes and the TPM of e-cigarettes. Comparable concentrations of EPFRs were detected in both sidestream (8.05 ± 1.32) × 104 pmol/g and mainstream TPM (7.41 ± 0.85) × 104 pmol/g of conventional cigarettes. TPM exposure to air resulted in long-lived oxygen centered, secondary radicals with EPR g values of 2.0041 for mainstream and 2.0044 for sidestream. Surprisingly, despite no combustion process, the TPM from e-cigarettes (menthol flavor of NJOY and V2 brands) also contain EPFRs with g values of 2.0031-2.0033, characteristic of carbon centered radicals, while the radical signal in the vanilla flavor of V2 brand was remarkably similar to semiquinones in cigarette smoke with a higher g value (2.0063). The radical concentration in e-cigarettes was much lower as compared to tobacco TPM. Although the production of ROS generated by e-cigarettes is comparatively lower than ROS generated by conventional cigarettes, EPFRs in e-cigarettes appear to be more potent than those in tobacco TPM with respect to hydroxyl radical generation yield per unit EPFR. EPFRs in e-cigarette TPM may be a potential source of health impacts.
Asunto(s)
Sistemas Electrónicos de Liberación de Nicotina , Productos de Tabaco , Radicales Libres/análisis , Material Particulado , NicotianaRESUMEN
BACKGROUND: Caesarean section (CS) delivery has a significant effect on maternal and neonatal health especially in a developing country like Bangladesh. The aim of the study was to determine the risk factors and their individual contribution to CS delivery among Bangladeshi married women in reproductive age. METHODS: The cross sectional secondary data was used in this study. Data was extracted from Bangladesh Demographic and Health Survey (BDHS), 2014 dataset. BDHS-2014 collected data from all over Bangladesh. Stepwise logistic regression analysis and population attributable fractions (PAF) were utilized in this study. RESULTS: A total number of 4422 married Bangladeshi women having at least one child (age ≤ 5 years) were considered in this study. The prevalence of CS delivery among Bangladeshi women was 23.94%. The stepwise logistic regression model showed that location (division), type of residence, education of respondent and her husband, working status, age at first birth, number of children, wealth index and baby's birth weight were most important predictors of CS delivery among Bangladeshi mothers. PAF demonstrated that overweight or obese women had highest contribution (23.36%) among the risk factors of CS delivery, followed by age at first birth (age > 20 years) (18.97%), highest wealth quintile (17.39%), higher education (15.93%), living in urban environment (14.39%), having lower number of ever born children (1-2 children) (13.58%), living in Dhaka division (12.11%), delivering large size of child at birth (11.13%) and housewife (6.55%). CONCLUSIONS: In the present study, we have identified the important risk factors and their individual contribution to CS delivery in Bangladesh. Consequently, these factors can be considered for reducing the rate of CS delivery in Bangladesh.
Asunto(s)
Cesárea/estadística & datos numéricos , Esposos/estadística & datos numéricos , Adulto , Factores de Edad , Bangladesh/epidemiología , Preescolar , Estudios Transversales , Demografía , Escolaridad , Empleo , Femenino , Humanos , Lactante , Recién Nacido , Modelos Logísticos , Obesidad/epidemiología , Obesidad/cirugía , Embarazo , Complicaciones del Embarazo/epidemiología , Complicaciones del Embarazo/cirugía , Prevalencia , Factores de Riesgo , Adulto JovenRESUMEN
Electronic-cigarette (e-cig) devices use heat to produce an inhalable aerosol from a liquid (e-liquid) composed mainly of humectants, nicotine, and flavoring chemicals. The aerosol produced includes fine and ultrafine particles, and potentially nicotine and aldehydes, which can be harmful to human health. E-cig users inhale these aerosols and, with the third-generation of e-cig devices, control design features (resistance and voltage) in addition to the choice of e-liquids, and the puffing profile. These are key factors that can significantly impact the toxicity of the inhaled aerosols. E-cig research, however, is challenging and complex mostly due to the absence of standardized assessments and to the numerous varieties of e-cig models and brands, as well as e-liquid flavors and solvents that are available on the market. These considerations highlight the urgent need to harmonize e-cig research protocols, starting with e-cig aerosol generation and characterization techniques. The current study focuses on this challenge by describing a detailed step-by-step e-cig aerosol generation technique with specific experimental parameters that are thought to be realistic and representative of real-life exposure scenarios. The methodology is divided into four sections: preparation, exposure, post-exposure analysis, plus cleaning and maintenance of the device. Representative results from using two types of e-liquid and various voltages are presented in terms of mass concentration, particle size distribution, chemical composition and cotinine levels in mice. These data demonstrate the versatility of the e-cig exposure system used, aside from its value for toxicological studies, as it allows for a broad range of computer-controlled exposure scenarios, including automated representative vaping topography profiles.
Asunto(s)
Aerosoles/análisis , Sistemas Electrónicos de Liberación de Nicotina/métodos , Vapeo/tendencias , HumanosRESUMEN
Cationic ionic liquids-based surfactants (ILS), such as 4-methyl pyridinium bromide (CnPBr, where n=4,6,8), were used in preparation of polyacrylamide gels, sample buffer, and running buffer for cationic ILS polyacrylamide gel electrophoresis (ILS-PAGE). These ILS are liquids in the pure state and were selected for improved separation of ribonuclease b (Rib b) glycoforms in a single step and a protein mixture containing bovine serum albumin (BSA, pI-4.8, 66.5kDa), ovalbumin (Ova, pI-4.6, 44.3kDa), α-chymotrypsinogen (α-Chy, pI-8.8, 25.7kDa), myoglobin (Myo, pI-6.8, 16.9kDa), and cytochrome c (Cyt c, pI-10.0, 12.3kDa). Results acquired for Rib b glycoform separation by use of ILS were compared with conventional non-ILS surfactants-PAGE: sodium dodecylsulfate (SDS)-PAGE, cetyltrimethylammonium bromide (CTAB)-PAGE, and benzyldimethyl-n-hexadecylammonium chloride (16-BAC)-PAGE. A single protein band was observed with relatively short migration time in all the conventional PAGE techniques tested. In contrast, ILS-PAGE showed multiple bands with two distinct bands for Rib b protein. The two distinct bands of Rib b from ILS-PAGE were further analyzed using MALDI-MS. Examination of MALDI-MS spectral data revealed the presence of Rib b glycoforms. Furthermore, a two-dimensional isoelectric focusing (IEF)/SDS-PAGE map of Rib b protein revealed negative charge heterogeneity on the protein, which is a common observation for glycoproteins. This overall discovery greatly enhances the capability of using cationic ILS-PAGE for Rib b protein separation. Among all ILS tested, excellent protein separations were observed using C4PBr ILS at concentrations of 0.05% (w/v) in polyacrylamide gels, 0.01% (w/v) in protein sample buffer, and 0.1% (w/v) in running buffer. Under these optimum conditions, all other tested proteins were separated as sharp bands with good resolution.
Asunto(s)
Electroforesis en Gel de Poliacrilamida/métodos , Líquidos Iónicos/química , Proteínas/química , Ribonucleasas/aislamiento & purificación , Electroforesis en Gel de Poliacrilamida/instrumentación , Proteínas/aislamiento & purificación , Ribonucleasas/química , Espectrometría de Masa por Láser de Matriz Asistida de Ionización Desorción , Tensoactivos/químicaRESUMEN
Molecularly imprinted polymers (MIPs) are an important class of selective materials for molecular specific sensors and separations. Molecular imprinting using non-covalent interactions in aqueous conditions still remains a difficult challenge due to interruption of hydrogen-bonding or electrostatic interactions water. Newly developed crosslinking ionic liquids are demonstrated herein to overcome problems of synthesizing aqueous MIPs, adding to previous examples of ionic liquids used as monomers in non-aqueous conditions or used as MIP solvents. Vinylimidazole ionic liquid crosslinkers were synthesized and subsequently explored as matrix supports for fabrication of molecularly imprinted polymeric nanoGUMBOS (nanoparticles derived from a group of uniform materials based on organic salts). Each of the four crosslinkers incorporated a unique functional spacer between the vinylimidazole groups, and the performance of the corresponding molecularly imprinted polymers was evaluated using chiral recognition as the diagnostic. High uptake values for l-tryptophan were found in the 13-87µmol/g range; and chiral recognition was determined via binding ratios of l-tryptophan over d-tryptophan that ranged from 5:1 to 13:1 for polymers made using different crosslinkers. Not only are these materials good for chiral recognition, but the results highlight the utility of these materials for imprinting aqueous templates such as biological targets for theranostic agents.
RESUMEN
Electronic cigarettes (E-cigs) have experienced sharp increases in popularity over the past five years due to many factors, including aggressive marketing, increased restrictions on conventional cigarettes, and a perception that E-cigs are healthy alternatives to cigarettes. Despite this perception, studies on health effects in humans are extremely limited and in vivo animal models have not been generated. Presently, we determined that E-cig vapor contains 7 x 10(11) free radicals per puff. To determine whether E-cig exposure impacts pulmonary responses in mice, we developed an inhalation chamber for E-cig exposure. Mice that were exposed to E-cig vapor contained serum cotinine concentrations that are comparable to human E-cig users. E-cig exposure for 2 weeks produced a significant increase in oxidative stress and moderate macrophage-mediated inflammation. Since, COPD patients are susceptible to bacterial and viral infections, we tested effects of E-cigs on immune response. Mice that were exposed to E-cig vapor showed significantly impaired pulmonary bacterial clearance, compared to air-exposed mice, following an intranasal infection with Streptococcus pneumonia. This defective bacterial clearance was partially due to reduced phagocytosis by alveolar macrophages from E-cig exposed mice. In response to Influenza A virus infection, E-cig exposed mice displayed increased lung viral titers and enhanced virus-induced illness and mortality. In summary, this study reports a murine model of E-cig exposure and demonstrates that E-cig exposure elicits impaired pulmonary anti-microbial defenses. Hence, E-cig exposure as an alternative to cigarette smoking must be rigorously tested in users for their effects on immune response and susceptibility to bacterial and viral infections.
Asunto(s)
Pulmón/microbiología , Pulmón/virología , Nicotina/efectos adversos , Nicotina/química , Fumar/efectos adversos , Animales , Radicales Libres/análisis , Subtipo H1N1 del Virus de la Influenza A/fisiología , Pulmón/efectos de los fármacos , Pulmón/inmunología , Masculino , Ratones , Ratones Endogámicos C57BL , Estrés Oxidativo/efectos de los fármacos , Fagocitosis/efectos de los fármacos , Streptococcus pneumoniae/fisiología , Carga Viral/efectos de los fármacos , VolatilizaciónRESUMEN
Combustion processes generate particulate matter that affects human health. When incineration fuels include components that are highly enriched in aromatic hydrocarbons (especially halogenated varieties) and redox-active metals, ultrafine particulate matter containing air-stable, environmentally persistent free radicals (EPFRs) is generated. The exposure to fine EPFRs (less than 2.5 µm in diameter) has been shown to negatively influence pulmonary and cardiovascular functions in living organisms. The goal of this study was to determine if these EPFRs have a direct effect on cytochrome P450 function. This was accomplished by direct addition of the EPFRs to rat liver microsomal preparations and measurement of several P450 activities using form-selective substrates. The EPFRs used in this study were formed by heating vapors from an organic compound (either monochlorophenol (MCP230) or 1,2-dichlorobenzene (DCB230)) and 5% copper oxide supported on silica (approximately 0.2 µm in diameter) to 230°C under vacuum. Both types of EPFRs (but not silica, physisorbed silica, or silica impregnated with copper oxide) dramatically inhibited the activities of CYP1A, CYP2B, CYP2E1, CYP2D2 and CYP3A when incubated at concentrations less than 0.1 mg/ml with microsomes and NADPH. Interestingly, at the same concentrations, the EPFRs did not inhibit HO-1 activity or the reduction of cytochrome c by NADPH-cytochrome P450 reductase. CYP2D2-selective metabolism by rat liver microsomes was examined in more detail. The inhibition of CYP2D2-selective metabolism by both DCB230- and MCP230-EPFRs appeared to be largely noncompetitive and was attenuated in the presence of catalase suggesting that reactive oxygen species may be involved in the mechanism of inhibition.
Asunto(s)
Clorobencenos/toxicidad , Clorofenoles/toxicidad , Inhibidores Enzimáticos del Citocromo P-450 , Inhibidores Enzimáticos/toxicidad , Radicales Libres/toxicidad , Microsomas Hepáticos/efectos de los fármacos , Material Particulado/toxicidad , Animales , Hidrocarburo de Aril Hidroxilasas/antagonistas & inhibidores , Hidrocarburo de Aril Hidroxilasas/metabolismo , Catalasa/metabolismo , Clorobencenos/metabolismo , Clorofenoles/metabolismo , Sistema Enzimático del Citocromo P-450/metabolismo , Relación Dosis-Respuesta a Droga , Inhibidores Enzimáticos/metabolismo , Radicales Libres/metabolismo , Isoenzimas , Cinética , Masculino , Microsomas Hepáticos/enzimología , Tamaño de la Partícula , Material Particulado/metabolismo , Ratas , Ratas Sprague-Dawley , Especificidad por SustratoRESUMEN
Particulate matter (PM) is emitted during thermal decomposition of waste. During this process, aromatic compounds chemisorb to the surface of metal-oxide-containing PM, forming a surface-stabilized environmentally persistent free radical (EPFR). We hypothesized that EPFR-containing PM redox cycle to produce ROS and that this redox cycle is maintained in biological environments. To test our hypothesis, we incubated model EPFRs with the fluorescent probe dihydrorhodamine (DHR). Marked increases in DHR fluorescence were observed. Using a more specific assay, hydroxyl radicals ((â¢)OH) were also detected, and their level was further increased by cotreatment with thiols or ascorbic acid (AA), known components of epithelial lining fluid. Next, we incubated our model EPFR in bronchoalveolar lavage fluid (BALF) or serum. Detection of EPFRs and (â¢)OH verified that PM generate ROS in biological fluids. Moreover, incubation of pulmonary epithelial cells with EPFR-containing PM increased (â¢)OH levels compared to those in PM lacking EPFRs. Finally, measurements of oxidant injury in neonatal rats exposed to EPFRs by inhalation suggested that EPFRs induce an oxidant injury within the lung lining fluid and that the lung responds by increasing antioxidant levels. In summary, our EPFR-containing PM redox cycle to produce ROS, and these ROS are maintained in biological fluids and environments. Moreover, these ROS may modulate toxic responses of PM in biological tissues such as the lung.
Asunto(s)
Radicales Libres/metabolismo , Modelos Biológicos , Material Particulado/química , Material Particulado/metabolismo , Especies Reactivas de Oxígeno/metabolismo , Animales , Radicales Libres/química , Humanos , Oxidación-Reducción , Ratas , Ratas Endogámicas BNRESUMEN
A novel pH sensitive, colorimetric ionic liquid nanosensor based on phosphonium salts of fluorescein is reported. Herein, fluorescein salts of various stoichiometries were synthesized by use of a trihexyltetradecylphosphonium cation [TTP]+ in combination with dianionic [FL]2- and monoanionic [FL]- fluorescein. Nanomaterials derived from these two compounds yielded contrasting colorimetric responses in neutral and acidic environments. Variations in fluorescence spectra as a function of pH were also observed. Examination of TEM and DLS data revealed significant expansion in the diameter of [TTP]2[FL] nanodroplets in acidic environments of variable pHs. A similar trend was also observed for [TTP][FL] nanoparticles. The pH dependent colorimetric and other optical properties of these nanomaterials are attributed to alterations in molecular orientations and stacking as suggested by measuring the absorption, fluorescence, and zeta potential. Since the pH is an important indicator for many diseases, including cancer, these nanosensors are considered to be potential candidates for biomedical applications.