Exploratory mass cytometry analysis reveals immunophenotypes of cancer treatment-related pneumonitis.

Anticancer treatments can result in various adverse effects, including infections due to immune suppression/dysregulation and drug-induced toxicity in the lung. One of the major opportunistic infections is Pneumocystis jirovecii pneumonia (PCP), which can cause severe respiratory complications and high mortality rates. Cytotoxic drugs and immune-checkpoint inhibitors (ICIs) can induce interstitial lung diseases (ILDs). Nonetheless, the differentiation of these diseases can be difficult, and the pathogenic mechanisms of such diseases are not yet fully understood. To better comprehend the immunophenotypes, we conducted an exploratory mass cytometry analysis of immune cell subsets in bronchoalveolar lavage fluid from patients with PCP, cytotoxic drug-induced ILD (DI-ILD), and ICI-associated ILD (ICI-ILD) using two panels containing 64 markers. In PCP, we observed an expansion of the CD16+ T cell population, with the highest CD16+ T proportion in a fatal case. In ICI-ILD, we found an increase in CD57+ CD8+ T cells expressing immune checkpoints (TIGIT+ LAG3+ TIM-3+ PD-1+), FCRL5+ B cells, and CCR2+ CCR5+ CD14+ monocytes. These findings uncover the diverse immunophenotypes and possible pathomechanisms of cancer treatment-related pneumonitis.

Surfactant protein D prevents mucin overproduction in airway goblet cells via SIRPα.

Mucin overproduction is a common feature of chronic airway diseases such as asthma and chronic obstructive pulmonary disease (COPD), and exacerbates their underlying respiratory condition. Surfactant protein D (SP-D) protects against airway diseases through modulation of immune reactions, but whether it also exerts direct effects on airway epithelial cells has remained unclear. Therefore, we sought to investigate the inhibitory role of SP-D on mucin production in airway epithelial cells. We prepared air-liquid interface (ALI) cultures of human primary bronchial epithelial cells (HBECs), which recapitulated a well-differentiated human airway epithelium. Benzo(a)pyrene (BaP), a key toxicant in cigarette smoke, induced mucin 5AC (MUC5AC) production in ALI-cultured HBECs, airway secretory cell lines, and airway epithelia of mice. Then, the protective effects of SP-D against the BaP-induced mucin overproduction were examined. BaP increased MUC5AC production in ALI cultures of HBECs, and this effect was attenuated by SP-D. SP-D also suppressed the BaP-induced phosphorylation of extracellular signal-regulated kinase (ERK) and MUC5AC expression in NCI-H292 goblet-like cells, but not in NCI-H441 club-like cells. Signal regulatory protein α (SIRPα) was found to be expressed in HBECs and NCI-H292 cells but absent in NCI-H441 cells. In NCI-H292 cells, SP-D activated SH2 domain-containing tyrosine phosphatase-1 (SHP-1), downstream of SIRPα, and knockdown of SIRPα abolished the suppressive effects of SP-D on BaP-induced ERK phosphorylation and MUC5AC production. Consistent with these in vitro findings, intratracheal instillation of SP-D prevented the BaP-induced phosphorylation of ERK and Muc5ac expression in airway epithelial cells in a mouse model. SP-D acts directly on airway epithelial cells to inhibit mucin secretion through ligation of SIRPα and SHP-1-mediated dephosphorylation of ERK. Targeting of SIRPα is therefore a potential new therapeutic approach to suppression of mucin hypersecretion in chronic airway diseases such as COPD and asthma.

Altered macrophage phenotypes in a case of autoimmune pulmonary alveolar proteinosis.

Mass cytometry of BALF cells from a pulmonary alveolar proteinosis patient, positive for anti-GM-CSF antibodies, suggests potential impairment in human alveolar macrophage differentiation https://bit.ly/45JHUrz.

Expansion of ST2-expressing macrophages in a patient with bronchiolitis obliterans syndrome.

This case study of a patient with BOS after HSCT found increased ST2+CD64+ macrophages in BALF, a potential therapeutic target for treatment-refractory BOS, and reduced CCR2+CD14+ monocytes compared to other lung disorders https://bit.ly/406Uyy9.

Bond Strength of Sandblasted PEEK with Dental Methyl Methacrylate-Based Cement or Composite-Based Resin Cement.

Poly-ether-ether-ketone (PEEK) is commonly employed in dental prostheses owing to its excellent mechanical properties; however, it is limited by its low bond strength with dental resin cement. This study aimed to clarify the type of resin cement most suitable for bonding to PEEK: methyl methacrylate (MMA)-based resin cement or composite-based resin cement. For this purpose, two MMA-based resin cements (Super-Bond EX and MULTIBOND II) and five composite-based resin cements (Block HC Cem, RelyX Universal Resin Cement, G-CEM LinkForce, Panavia V5, and Multilink Automix) were used in combination with appropriate adhesive primers. A PEEK block (SHOFU PEEK) was initially cut, polished, and sandblasted with alumina. The sandblasted PEEK was then bonded to resin cement with adhesive primer according to the manufacturer's instructions. The resulting specimens were immersed in water at 37 °C for 24 h, followed by thermocycling. Subsequently, the tensile bond strengths (TBSs) of the specimens were measured; the TBSs of the composite-based resin cements after thermocycling were found to be zero (G-CEM LinkForce, Panavia V5, and Multilink Automix), 0.03 ± 0.04 (RelyX Universal Resin Cement), or 1.6 ± 2.7 (Block HC Cem), whereas those of Super-Bond and MULTIBOND were 11.9 ± 2.6 and 4.8 ± 2.3 MPa, respectively. The results demonstrated that MMA-based resin cements exhibited stronger bonding to PEEK than composite-based resin cements.

Mass cytometry identifies characteristic immune cell subsets in bronchoalveolar lavage fluid from interstitial lung diseases.

Immune cells have been implicated in interstitial lung diseases (ILDs), although their phenotypes and effector mechanisms remain poorly understood. To better understand these cells, we conducted an exploratory mass cytometry analysis of immune cell subsets in bronchoalveolar lavage fluid (BALF) from patients with idiopathic pulmonary fibrosis (IPF), connective-tissue disease (CTD)-related ILD, and sarcoidosis, using two panels including 64 markers. Among myeloid cells, we observed the expansion of CD14+ CD36hi CD84hiCCR2- monocyte populations in IPF. These CD14+ CD36hi CD84hi CCR2- subsets were also increased in ILDs with a progressive phenotype, particularly in a case of acute exacerbation (AEx) of IPF. Analysis of B cells revealed the presence of cells at various stages of differentiation in BALF, with a higher percentage of IgG memory B cells in CTD-ILDs and a trend toward more FCRL5+ B cells. These FCRL5+ B cells were also present in the patient with AEx-IPF and sarcoidosis with advanced lung lesions. Among T cells, we found increased levels of IL-2R+ TIGIT+ LAG3+ CD4+ T cells in IPF, increased levels of CXCR3+ CD226+ CD4+ T cells in sarcoidosis, and increased levels of PD1+ TIGIT+ CD57+ CD8+ T cells in CTD-ILDs. Together, these findings underscore the diverse immunopathogenesis of ILDs.

Dental Poly(methyl methacrylate)-Based Resin Containing a Nanoporous Silica Filler.

Poly(methyl methacrylate) (PMMA)-based resins have been conventionally used in dental prostheses owing to their good biocompatibility. However, PMMA-based resins have relatively poor mechanical properties. In the present study, a novel nanoporous silica filler was developed and introduced into PMMA-based resins to improve their mechanical properties. The filler was prepared by sintering a green body composed of silica and an organic binder, followed by grinding to a fine powder and subsequent silanization. The filler was added to photocurable PMMA-based resin, which was prepared from MMA, PMMA, ethylene glycol dimethacrylate, and a photo-initiator. The filler was characterized by scanning electron microscopy (SEM), X-ray diffraction analysis, nitrogen sorption porosimetry, and Fourier transform infrared (FT-IR) spectroscopy. The PMMA-based resins were characterized by SEM and FT-IR, and the mechanical properties (Vickers hardness, flexural modulus, and flexural strength) and physicochemical properties (water sorption and solubility) were evaluated. The results suggested that the filler consisted of microparticles with nanopores. The filler at 23 wt % was well dispersed in the PMMA-based resin matrix. The mechanical and physicochemical properties of the PMMA-based resin improved significantly with the addition of the developed filler. Therefore, such filler-loaded PMMA-based resins are potential candidates for improving the strength and durability of polymer-based crown and denture base.

Wide field-of-view x-ray imaging optical system using grazing-incidence mirrors.

A field-curvature-corrected imaging optical system for x-ray microscopy using only grazing-incidence mirrors is proposed. It combines a Wolter type I (WO1) mirror pair, which forms a real image, with field curvature correction (FCC) optics-a convex hyperbolic mirror pair-that form a virtual image; compensation of the field curvatures realizes a wide field-of-view (FOV) and high magnification. Ray-tracing and wave-optics simulations verified the efficacy of the design, for which a FOV width was 111 µm-4.7 times larger than that for the uncorrected WO1 design. The addition of FCC optics also produced a 2.3-fold increase in magnification.

Development of Dental Poly(methyl methacrylate)-Based Resin for Stereolithography Additive Manufacturing.

Poly(methyl methacrylate) (PMMA) is widely used in dental applications. However, PMMA specialized for stereolithography (SLA) additive manufacturing (3D-printing) has not been developed yet. This study aims to develop a novel PMMA-based resin for SLA 3D-printing by mixing methyl methacrylate (MMA), ethylene glycol dimethacrylate (EGDMA), and PMMA powder in various mixing ratios. The printability and the viscosity of the PMMA-based resins were examined to determine their suitability for 3D-printing. The mechanical properties (flexural strength and Vickers hardness), shear bond strength, degree of conversion, physicochemical properties (water sorption and solubility), and cytotoxicity for L929 cells of the resulting resins were compared with those of three commercial resins: one self-cured resin and two 3D-print resins. EGDMA and PMMA were found to be essential components for SLA 3D-printing. The viscosity increased with PMMA content, while the mechanical properties improved as EGDMA content increased. The shear bond strength tended to decrease as EGDMA increased. Based on these characteristics, the optimal composition was determined to be 30% PMMA, 56% EGDMA, 14% MMA with flexural strength (84.6 ± 7.1 MPa), Vickers hardness (21.6 ± 1.9), and shear bond strength (10.5 ± 1.8 MPa) which were comparable to or higher than those of commercial resins. The resin's degree of conversion (71.5 ± 0.7%), water sorption (19.7 ± 0.6 µg/mm3), solubility (below detection limit), and cell viability (80.7 ± 6.2% at day 10) were all acceptable for use in an oral environment. The printable PMMA-based resin is a potential candidate material for dental applications.

Imaging Changes and Immune-Checkpoint Expression on T Cells in Bronchoalveolar Lavage Fluid from Patients with Pulmonary Sarcoidosis.

Sarcoidosis is a systemic, granulomatous disease caused by unknown immunological abnormalities. The organs most vulnerable to sarcoidosis are the lungs. Patients often resolve spontaneously, but the lungs can also be severely affected. Although details regarding prognostic factors in sarcoidosis patients with lung involvement remain unclear, several reports have suggested that immune checkpoint molecules are involved in the pathogenesis of sarcoidosis. In this study, we divided sarcoidosis patients into two groups based on chest computed tomography (CT) findings and compared immune checkpoint molecules expressed on T cells in bronchoalveolar lavage fluid (BALF) in the two groups, using flow cytometry. We found elevated programmed cell death 1 (PD-1) or T cell immunoglobulin- and mucin-domain-containing molecule-3 (TIM-3) expression on T cells in BALF in patients with spontaneous improvement in CT findings, compared with those in patients without improvement in CT findings. In conclusion, our study implies that PD-1 or TIM-3 expression on T cells in BALF may be a prognostic factor for pulmonary lesions in sarcoidosis.

Immune checkpoint protein and cytokine expression by T lymphocytes in pleural effusion of cancer patients receiving anti-PD-1 therapy.

OBJECTIVES: Pleural effusion (PE) occasionally develops in cancer patients during treatment with antibodies to programmed cell death-1 (PD-1) or to its ligand PD-L1 (hereafter, αPD-1 therapy). Such effusion often contains infiltrated mononuclear cells, although the types of immune cell present as well as the outcome of such patients have remained unclear. MATERIALS AND METHODS: We performed a multi-institutional, observational study to examine the clinical outcome of patients who develop PE after the onset of αPD-1 therapy. We compared the immune cell profiles and the immune status of lymphocytes in PE as determined by flow cytometry between nine patients who developed effusion during αPD-1 therapy (αPD-1 group) and 15 patients who developed PE during treatment with other anticancer agents (control group). RESULTS: Most mononuclear cells in PE were lymphocytes in both the αPD-1 and control groups. The frequency of both CD4+ and CD8+ T lymphocytes expressing the immune checkpoint proteins TIM-3 or TIGIT as well as that of CD8+ T lymphocytes expressing PD-L1 were increased in the αPD-1 group compared with the control group. αPD-1 therapy continued for a substantial period after the emergence of PE in six of the nine patients in the αPD-1 group, and the frequency of CD4+ T lymphocytes in PE expressing the immune checkpoint protein LAG-3 or the cytokine interkeukin-17 was lower for these patients than for those who did not receive a sustained treatment benefit. CONCLUSION: Our results suggest a clinical benefit of continuing αPD-1 therapy in some patients who develop PE. We found that infiltrating T lymphocytes in PE manifest a more exhausted phenotype during αPD-1 therapy than during treatment with other cancer drugs, with subpopulations of these cells characterized by specific immune checkpoint protein and cytokine expression profiles possibly contributing to the antitumor immune response.

Observation of exceptionally low-lying π-π* excited states in oxidized forms of quadruple-decker phthalocyanine complexes.

Spectroscopic investigations have been performed for the oxidized forms of two quadruple-decker phthalocyanine complexes in order to clarify the electronic structures of multiply stacked π-systems. Up to three-electron-oxidized species were isolated by using phenoxathiin hexachloroantimonate as the oxidant. As the oxidations proceed, the Q-bands in the visible region shift bathochromically along with the clear isosbestic points. The one- and three-electron-oxidized species exhibited typical π-radical signals in the ESR spectra, while the neutral and two-electron oxidized species gave no indication of the presence of π-radicals. The electronic transitions observed for the oxidized species reach even into the so-called fingerprint region in IR spectroscopy (~1000 cm(-1)). With the aid of theoretical calculations, these bands can be assigned to the π-π* transitions. Our results provide new insights into π-electronic systems having exceptionally small MO energy gaps.