RESUMEN
Oral lichen planus (OLP) and recurrent aphthous stomatitis (RAS) are chronic inflammatory conditions often characterised by erosive and/or painful oral lesions that have a considerable impact on quality of life. Current treatment often necessitates the use of steroids in the form of mouthwashes, creams or ointments, but these are often ineffective due to inadequate drug contact times with the lesion. Here we evaluate the performance of novel mucoadhesive patches for targeted drug delivery. Electrospun polymeric mucoadhesive patches were produced and characterised for their physical properties and cytotoxicity before evaluation of residence time and acceptability in a human feasibility study. Clobetasol-17-propionate incorporated into the patches was released in a sustained manner in both tissue-engineered oral mucosa and ex vivo porcine mucosa. Clobetasol-17 propionate-loaded patches were further evaluated for residence time and drug release in an in vivo animal model and demonstrated prolonged adhesion and drug release at therapeutic-relevant doses and time points. These data show that electrospun patches are adherent to mucosal tissue without causing tissue damage, and can be successfully loaded with and release clinically active drugs. These patches hold great promise for the treatment of oral conditions such as OLP and RAS, and potentially many other oral lesions.
Asunto(s)
Adhesivos/farmacología , Clobetasol/farmacología , Sistemas de Liberación de Medicamentos , Mucosa Bucal/efectos de los fármacos , Moco/química , Animales , Muerte Celular/efectos de los fármacos , Humanos , Ratas , Porcinos , Factores de TiempoRESUMEN
Injuries to articular cartilage are frequently difficult to repair, in part because of the poor regenerative capacity of this tissue. To date, no successful system for complete regeneration of the most challenging cartilage defects has been demonstrated. The aim of this work was to develop functionalised hydrogels at the nanoscale by Layer-by-Layer (LbL) assembly to promote cartilage healing. Hydrogels, based on sodium alginate (NaAlg) and gelatin (G), were prepared by an external gelation method consisting of CaCl2 diffusion and genipin addition for G crosslinking. Successively, hydrogels were coated with G to obtain a positive charge on the surface, then functionalised by LbL assembly to create 16 nanolayers, based on poly(styrene sulfonate)/poly(allyl amine) (PSS/PAH), including a specific peptide sequence (CTATVHL) and transforming growth factors ß1 (TGF-ß1). Physico-chemical properties were evaluated by XPS, ATR-FTIR and rheological analyses while in vitro cytocompatibility was studied using bovine articular chondrocytes (BAC). XPS spectra showed N1s and S2p peaks, indicating that PAH and PSS have been introduced with success. ATR-FTIR indicated the specific PAH and PSS absorption peaks. Finally, the biomolecule incorporation influenced positively the processes of BAC adhesion and proliferation, and glycosamynoglycan secretion. The functionalised alginate-based hydrogels described here are ideally suited to chondral regeneration in terms of their integrity, stability, and cytocompatibility.
Asunto(s)
Alginatos/química , Materiales Biocompatibles/química , Materiales Biocompatibles/farmacología , Cartílago Articular/efectos de los fármacos , Hidrogeles/química , Nanoestructuras/química , Animales , Bovinos , Ácido Glucurónico/química , Ácidos Hexurónicos/química , Poliaminas/químicaAsunto(s)
Otorrea de Líquido Cefalorraquídeo/cirugía , Contraindicaciones de los Medicamentos , Cementos de Ionómero Vítreo/efectos adversos , Apófisis Mastoides/patología , Apófisis Mastoides/cirugía , Adolescente , Adulto , Anciano , Otorrea de Líquido Cefalorraquídeo/diagnóstico por imagen , Otorrea de Líquido Cefalorraquídeo/patología , Niño , Femenino , Humanos , Masculino , Apófisis Mastoides/diagnóstico por imagen , Persona de Mediana Edad , Estudios Retrospectivos , Tomografía Computarizada por Rayos X , Reino Unido , Adulto JovenRESUMEN
Biomaterials composed of hydroxyapatite (HA) are currently used for the treatment of bone defects resulting from trauma or surgery. However, hydroxyapatite supplied in the form of a paste is considered a very convenient medical device compared to the materials where HA powder and liquid need to be mixed immediately prior to the bone treatment during surgery. In this study we have tested a series of hydroxyapatite (HA) pastes with varying microstructure and different rheological behaviour to evaluate their injectability and biocompatibility. The particle morphology and chemical composition were evaluated using HRTEM, XRD and FTIR. Two paste-types were compared, with the HA particles of both types being rod shaped with a range of sizes between 20 and 80nm while differing in the particle aspect ratio and the degree of roundness or sharpness. The pastes were composed of pure HA phase with low crystallinity. The rheological properties were evaluated and it was determined that the pastes behaved as shear-thinning, non-Newtonian liquids. The difference in viscosity and yield stress between the two pastes was investigated. Surprisingly, mixing of these pastes at different ratios did not alter viscosity in a linear manner, providing an opportunity to produce a specific viscosity by mixing the two materials with different characteristics. Biocompatibility studies suggested that there was no difference in vitro cell response to either paste for primary osteoblasts, bone marrow mesenchymal stromal cells, osteoblast-like cells, and fibroblast-like cells. This class of nanostructured biomaterial has significant potential for use as an injectable bone graft substitute where the properties may be tailored for different clinical indications.
Asunto(s)
Sustitutos de Huesos , Durapatita , Ensayo de Materiales , Nanopartículas/química , Animales , Sustitutos de Huesos/química , Sustitutos de Huesos/farmacología , Línea Celular Tumoral , Durapatita/química , Durapatita/farmacología , Humanos , Ratones , Nanopartículas/ultraestructura , Tamaño de la Partícula , ReologíaRESUMEN
The treatment of deep bone infections remains a significant challenge in orthopaedic and dental surgery. The relatively recent commercial manufacture of nanoscale hydroxyapatite has provided surgeons with an injectable biomaterial that promotes bone tissue regeneration, and with further modification it may be possible to incorporate antimicrobial properties into these devices. Silver-doped nanoscale hydroxyapatite pastes (0, 2, 5 and 10 mol.% silver) were prepared using a rapid mixing method. When the process was modified to prepare a 10 mol.% silver-doped material, silver phosphate was detected in addition to nanoscale hydroxyapatite. Thermal decomposition occurred more readily with greater silver content following calcination at 1000 °C for 2 h. Silver-doped nanoscale hydroxyapatite pastes showed antibacterial activity against Staphylococcus aureus and Pseudomonas aeruginosa in a dose dependent manner using both agar diffusion assays and suspension cultures. It was concluded that the enhanced antibacterial activity of the silver-doped pastes was due to the action of diffusible silver ions. Based on these results, silver-doped nanoscale hydroxyapatite pastes represent a highly promising new biomaterial system for the prevention and treatment of deep infections in bone tissue.
RESUMEN
Modified fluorcanasite glasses were fabricated by either altering the molar ratios of Na(2)O and CaO or by adding P(2)O(5) to the parent stoichiometric glass compositions. Glasses were converted to glass-ceramics by a controlled two-stage heat treatment process. Rods (2 mm x 4 mm) were produced using the conventional lost-wax casting technique. Osteoconductive 45S5 bioglass was used as a reference material. Biocompatibility and osteoconductivity were investigated by implantation into healing defects (2 mm) in the midshaft of rabbit femora. Tissue response was investigated using conventional histology and scanning electron microscopy. Histological and histomorphometric evaluation of specimens after 12 weeks implantation showed significantly more bone contact with the surface of 45S5 bioglass implants when compared with other test materials. When the bone contact for each material was compared between experimental time points, the Glass-Ceramic 2 (CaO rich) group showed significant difference (p = 0.027) at 4 weeks, but no direct contact at 12 weeks. Histology and backscattered electron photomicrographs showed that modified fluorcanasite glass-ceramic implants had greater osteoconductivity than the parent stoichiometric composition. Of the new materials, fluorcanasite glass-ceramic implants modified by the addition of P(2)O(5) showed the greatest stimulation of new mineralized bone tissue formation adjacent to the implants after 4 and 12 weeks implantation.
Asunto(s)
Materiales Biocompatibles/metabolismo , Sustitutos de Huesos/metabolismo , Huesos/metabolismo , Cerámica/metabolismo , Silicatos/metabolismo , Animales , Materiales Biocompatibles/química , Sustitutos de Huesos/química , Cerámica/química , Femenino , Vidrio , Implantes Experimentales , Ensayo de Materiales , Conejos , Distribución Aleatoria , Silicatos/químicaRESUMEN
Naturally derived polymers have been extensively used in scaffold production for cartilage tissue engineering. The present work aims to evaluate and characterize extracellular matrix (ECM) formation in two types of chitosan-based scaffolds, using bovine articular chondrocytes (BACs). The influence of these scaffolds' porosity, as well as pore size and geometry, on the formation of cartilagineous tissue was studied. The effect of stirred conditions on ECM formation was also assessed. Chitosan-poly(butylene succinate) (CPBS) scaffolds were produced by compression moulding and salt leaching, using a blend of 50% of each material. Different porosities and pore size structures were obtained. BACs were seeded onto CPBS scaffolds using spinner flasks. Constructs were then transferred to the incubator, where half were cultured under stirred conditions, and the other half under static conditions for 4 weeks. Constructs were characterized by scanning electron microscopy, histology procedures, immunolocalization of collagen type I and collagen type II, and dimethylmethylene blue assay for glycosaminoglycan (GAG) quantification. Both materials showed good affinity for cell attachment. Cells colonized the entire scaffolds and were able to produce ECM. Large pores with random geometry improved proteoglycans and collagen type II production. However, that structure has the opposite effect on GAG production. Stirred culture conditions indicate enhancement of GAG production in both types of scaffold.
Asunto(s)
Materiales Biocompatibles/química , Butileno Glicoles/química , Cartílago/crecimiento & desarrollo , Quitosano/química , Condrocitos/fisiología , Matriz Extracelular/fisiología , Polímeros/química , Andamios del Tejido/química , Absorción , Animales , Materiales Biomiméticos/química , Cartílago/citología , Bovinos , Técnicas de Cultivo de Célula/métodos , Células Cultivadas , Condrocitos/citología , Cristalización/métodos , Proteínas de la Matriz Extracelular/metabolismo , Ensayo de Materiales , Tamaño de la Partícula , Porosidad , Propiedades de Superficie , Ingeniería de Tejidos/métodosRESUMEN
There are concerns that tooth bleaching agents may adversely affect dental materials. The aim of this study was to test the hypothesis that increasing concentrations of hydrogen peroxide (HP) are more effective than water at increasing metal ion release from two typical dental casting alloys during bleaching. Discs (n = 28 for each alloy) were prepared by casting and heat treated to simulate a typical porcelain-firing cycle. Discs (n = 7) of each alloy were immersed in either 0%, 3%, 10% or 30% (w/v) HP solutions for 24 h at 37 degrees C. Samples were taken for metal ion release determination using inductively coupled plasma-mass spectrometry and the data analysed using a two-way anova followed by a one-way anova. The surface roughness of each disc was measured using a Talysurf contact profilometer before and after bleaching and the data analysed using a paired t-test. With the exception of gold, the differences in metal ion concentration after treatment with 0% (control) and each of 3%, 10% and 30% HP (w/v) were statistically significant (P < 0.05). Metal ion release from the two alloys increased with increasing HP concentrations (over 3000% increase in Ni and 1400% increase in Pd ions were recorded when HP concentration increased from 0% to 30%). Surface roughness values of the samples before and after bleaching were not significantly different (P > 0.05) Exposure of the two dental casting alloys to HP solutions increased metal ion release of all the elements except gold.
Asunto(s)
Aleaciones Dentales/química , Peróxido de Hidrógeno/efectos adversos , Metales , Oxidantes/efectos adversos , Blanqueamiento de Dientes/efectos adversos , Corrosión , Humanos , Iones , Ensayo de Materiales/métodos , Propiedades de SuperficieRESUMEN
Modified fluorcanasite glass-ceramics were produced by controlled two stage heat-treatment of as-cast glasses. Castability was determined using a spiral castability test and the lost-wax method. Specimens were cast into moulds formed from gypsum and phosphate bonded investments to observe their effect on the casting process, surface roughness, surface composition and biocompatibility. Both gypsum and phosphate bonded investments could be successfully used for the lost-wax casting of fluorcanasite glasses. Although the stoichiometric glass composition had the highest castability, all modified compositions showed good relative castability. X-ray diffraction showed similar bulk crystallisation for each glass, irrespective of the investment material. However, differences in surface crystallisation were detected when different investment materials were used. Gypsum bonded investment discs showed slightly improved in vitro biocompatibility than equivalent phosphate bonded investment discs under the conditions used.
Asunto(s)
Cerámica/química , Vidrio/química , Silicatos/química , Animales , Materiales Biocompatibles/química , Sustitutos de Huesos/química , Línea Celular Tumoral , Ratas , Propiedades de Superficie , Difracción de Rayos XRESUMEN
OBJECTIVES: Tooth bleaching agents may adversely affect tooth structure. The aim of this study was to investigate the effect of hydrogen peroxide concentration on mineral loss and microhardness of bovine teeth. METHODS: Twenty-six freshly extracted intact bovine incisor teeth were stored in distilled water. Five teeth were sectioned and four samples (2 mm x 2 mm x 1.5 mm) each of enamel and dentine were obtained from each tooth. The samples of enamel and dentine were divided into four groups and immersed in either 0%, 3%, 10% or 30% (w/v) hydrogen peroxide solutions for 24h at 37 degrees C. Samples from the solutions were taken for ion release analysis using inductively coupled plasma mass spectrometry. The remaining 21 teeth were mounted in epoxy resin and the upper surface of the specimens were ground and polished to expose the enamel and dentine for microhardness measurements. These specimens were randomly divided into three equal groups and Vickers microhardness values were recorded on the enamel and dentine surfaces of each group before and after bleaching. RESULTS: The differences in ion release concentration after treatment with 0% (control) and each of 3%, 10% and 30% hydrogen peroxide (w/v) were statistically significant (p<0.025). The release of calcium and phosphorous ions increased with increasing hydrogen peroxide concentrations. A significant reduction (p<0.05) in Vickers microhardness values for enamel was recorded after bleaching. CONCLUSIONS: Ion release from both enamel and dentine increased with increasing hydrogen peroxide concentration. Microhardness of enamel decreased significantly with bleaching.
Asunto(s)
Esmalte Dental/efectos de los fármacos , Dentina/efectos de los fármacos , Peróxido de Hidrógeno/administración & dosificación , Oxidantes/administración & dosificación , Blanqueamiento de Dientes/métodos , Animales , Calcio/análisis , Bovinos , Dureza , Espectrometría de Masas , Minerales/análisis , Fósforo/análisis , Distribución Aleatoria , Temperatura , Factores de TiempoRESUMEN
Low-friction surfaces are critical for efficient joint articulation. The tribological properties of articular cartilage have been studied extensively in native tissue and joints. Despite their importance, very few studies have examined the frictional properties of tissue-engineered cartilage. We have therefore reviewed the relationship between composition, structure and friction in tissue-engineered cartilage.
Asunto(s)
Cartílago/fisiología , Matriz Extracelular/fisiología , Ingeniería de Tejidos , Animales , Fricción , HumanosRESUMEN
In the present work we originally tested the suitability of corn starch-polycaprolactone (SPCL) scaffolds for pursuing a cartilage tissue engineering approach. Bovine articular chondrocytes were seeded on SPCL scaffolds under dynamic conditions using spinner flasks (total of 4 scaffolds per spinner flask using cell suspensions of 0.5 x 10(6) cells/ml) and cultured under orbital agitation for a total of 6 weeks. Poly(glycolic acid) (PGA) non-woven scaffolds and bovine native articular cartilage were used as standard controls for the conducted experiments. PGA is a kind of standard in tissue engineering approaches and it was used as a control in that sense. The tissue engineered constructs were characterized at different time periods by scanning electron microscopy (SEM), hematoxylin-eosin (H&E) and toluidine blue stainings, immunolocalisation of collagen types I and II, and dimethylmethylene blue (DMB) assay for glycosaminoglycans (GAG) quantification assay. SEM results for SPCL constructs showed that the chondrocytes presented normal morphological features, with extensive cells presence at the surface of the support structures, and penetrating the scaffolds pores. These observations were further corroborated by H&E staining. Toluidine blue and immunohistochemistry exhibited extracellular matrix deposition throughout the 3D structure. Glycosaminoglycans, and collagen types I and II were detected. However, stronger staining for collagen type II was observed when compared to collagen type I. The PGA constructs presented similar features to SPCL at the end of the 6 weeks. PGA constructs exhibited higher amounts of matrix glycosaminoglycans when compared to the SPCL scaffolds. However, we also observed a lack of tissue in the central area of the PGA scaffolds. Reasons for these occurrences may include inefficient cells penetration, necrosis due to high cell densities, or necrosis related with acidic by-products degradation. Such situation was not detected in the SPCL scaffolds, indicating the much better biocompatibility of the starch based scaffolds.
Asunto(s)
Cartílago Articular/citología , Cartílago Articular/crecimiento & desarrollo , Condrocitos/citología , Condrocitos/fisiología , Poliésteres/química , Almidón/química , Ingeniería de Tejidos/métodos , Animales , Materiales Biocompatibles/química , Materiales Biomiméticos/química , Bovinos , Técnicas de Cultivo de Célula/métodos , Diferenciación Celular , Proliferación Celular , Supervivencia Celular , Células Cultivadas , Cristalización/métodos , Matriz Extracelular/química , Ensayo de Materiales , Tamaño de la Partícula , Propiedades de SuperficieRESUMEN
OBJECTIVES: The aim of this study was to investigate the effect of hydrogen peroxide (HP) concentration on metal ion release from dental amalgam. METHODS: Dental amalgam discs (n=25) were prepared by packing amalgam into cylindrical plastic moulds (10 mm diameter and 2 mm height). The discs were divided into five equal groups and each group was immersed in 20 ml of either 0%, 1%, 3%, 10% or 30% HP solution for 24 h at 37 degrees C. Samples were taken for metal ion release determination (Hg, Ag, Sn and Cu) using inductively coupled plasma mass spectrometry (ICP-MS). The surface roughness of each disc was measured before and after bleaching. RESULTS: The differences in concentration of metal ions released after treatment with 0% (control) and each of 1%, 3%, 10% and 30% HP were statistically significant (p<0.05). Metal ion release for the elements (Hg, Ag, Sn and Cu) increased with exposure to increasing concentrations of HP. Surface roughness measurements of the samples before and after treatments with HP solutions were not significantly different (p>0.05). CONCLUSIONS: Exposure to HP bleaching agent was associated with increased metal ion released from dental amalgams compared to treatment with a control solution. Ion release was in proportion to the peroxide concentration tested, with the highest concentration associated with the greatest metal ion release for all elements investigated.
Asunto(s)
Amalgama Dental/química , Peróxido de Hidrógeno/química , Metales/química , Oxidantes/química , Cobre/química , Aleaciones Dentales/química , Humanos , Peróxido de Hidrógeno/administración & dosificación , Iones , Espectrometría de Masas , Ensayo de Materiales , Mercurio/química , Oxidantes/administración & dosificación , Plata/química , Propiedades de Superficie , Temperatura , Factores de Tiempo , Estaño/químicaRESUMEN
Fluorcanasite glass-ceramics were produced by controlled two stage heat-treatment of as-cast glasses. These glasses were modified from stoichiometric fluorcanasite composition by either adding P(2)O(5) or altering the molar ratios of Na(2)O and CaO. Commercial bioactive 45S5 Bioglass(R) was also prepared in-house to evaluate the relative in vitro biocompatibility of fluorcanasite glass-ceramics. The scanning electron microscopy (SEM) images showed that cells had colonized the surfaces of fluorcanasite glass-ceramics to form a confluent sheet. Quantitative MTT assay results were in good agreement with the qualitative SEM observations. It was concluded that incorporation of excess calcium oxide or P(2)O(5) in stoichiometric glass composition improved in vitro biocompatibility. Controlled heat-treatment further improved the biological response of cultured bone cells to modified fluorcanasite glass-ceramics when compared with their parent glasses. Ion release and pH data suggested a strong correlation between solubility (in particular, Na ion release) and biocompatibility. Reduced solubility, Na ion release, and related pH effects appeared to be the principal mechanisms responsible for improvement in in vitro biocompatibility.
Asunto(s)
Materiales Biocompatibles , Regeneración Ósea , Sustitutos de Huesos , Cerámica , Ensayo de Materiales , Animales , Materiales Biocompatibles/química , Sustitutos de Huesos/química , Línea Celular Tumoral , Cerámica/química , Iones/química , Microscopía Electrónica de Rastreo , Ratas , Sodio/química , Propiedades de SuperficieRESUMEN
INTRODUCTION: Since their invention in the late 1960s, glass ionomer cements (GICs) have been used extensively in dentistry but recently they have also been utilised in ear nose and throat (ENT) surgery. Unfortunately, Al3+, a component of conventional ionomer glasses, has been linked to poor bone mineralisation and neurotoxicity. OBJECTIVE: The aim of the research was to modify a commercial ionomer glass composition by substituting Al2O3 with Fe2O3. METHODS: Glasses with the following molar compositions were fabricated: 4.5SiO2*3M2O3*XP2O5*3CaO*2CaF2 (M = Al or Fe, X = 0-1.5). The glasses were characterised using X-ray fluorescence (XRF) and X-ray powder diffraction (XRD). Cements were prepared using a standard ratio of; 1 g of glass powder: 0.2 g of dried polyacrylic acid: 0.3 g of 10% tartaric acid solution. Cement formation was assessed using a Gilmore needle and in vitro biocompatibility was investigated for novel cement formulations. RESULTS: XRF revealed that the Fe2O3-based glasses had Al2O3 contamination from the crucibles and also had undergone substantial F- losses. XRD gave peaks that corresponded to magnetite Fe3O4 (JCPDS # 19-629) in all compositions. Apatite Ca5(PO4)3(OH,F) (JCPDS # 15-876) was identified in P2O5 containing glasses. It was possible to fabricate cements from all of the Fe2O3-based ionomer glasses. Good in vitro biocompatibility was observed for the Fe2O3-based cements. CONCLUSION: Ionomer glasses may be prepared by entirely replacing Al2O3 with Fe2O3. Cement setting times appeared to be related to P2O5 content. Fe2O3-based cements showed good in vitro biocompatibility.
Asunto(s)
Compuestos Férricos/toxicidad , Cementos de Ionómero Vítreo/química , Cementos de Ionómero Vítreo/toxicidad , Vidrio/química , Animales , Línea Celular Tumoral , Forma de la Célula , Cristalografía por Rayos X , Cementos de Ionómero Vítreo/síntesis química , Ensayo de Materiales , Microscopía Electrónica de Rastreo , Mitocondrias/efectos de los fármacos , RatasRESUMEN
Glass-ionomer cements (GIC) have been extensively used in dentistry for over 30 years. Due to their excellent biocompatibility in dental applications GIC have been formulated for medical applications. The past decade has seen some impressive advances in the development of medical GICs, however these advances have been matched by serious critical problems. This review examines the properties of GICs, which can influence their behaviour in a biological environment. The progress made and the problems encountered in the development of these bone cements will also be addressed. The review will conclude with the research currently being employed to optimise the biocompatibility of these important biomaterials. There is little doubt that GICs compare favourably with alternative bone cements for specific applications, based on in vitro and in vivo studies. There is however, a degree of risk inherent in the use of any medical device or biomaterial. GICs must therefore be used carefully and in accordance with the instructions that are based on a significant body of research data.
Asunto(s)
Cementos para Huesos/toxicidad , Cementos de Ionómero Vítreo/toxicidad , Aluminio/toxicidad , Animales , Artroplastia , Regeneración Ósea/efectos de los fármacos , Humanos , Ensayo de MaterialesRESUMEN
OBJECTIVES: There is concern that hydrogen peroxide generated by tooth bleaching agents may cause enhanced metal ion release (including mercury) from dental amalgam following contact. The aim of this in vitro study was therefore to investigate the effect of a carbamide peroxide (CP) based tooth bleaching gel on metal ion release from dental amalgam. METHODS: Dental amalgam discs were prepared according to the manufacturers' instructions. These were treated with either a 10% carbamide peroxide (CP) gel or a 0% CP gel for 24h. Discs were carefully wiped with cotton wool before immersion in distilled water (20 ml) for 24h at 37 degrees C. Following immersion, water samples were taken for metal ion release determination (Ag, Cu, Hg and Sn) using inductively coupled plasma mass spectrometry methods. The specimens were further evaluated for surface changes using scanning electron microscopy (SEM) and Talysurf surface roughness measurements. RESULTS: The differences in concentration of metal ions released after treatment with the 10% CP gel and a placebo gel treatment were not statistically significant (p>0.05). For example, mercury release following treatment with the 10% CP gel and the 0% CP gel was found to be 1.17(0.5) and 0.57(0.1)microgcm(-2), respectively. Roughness measurements for samples treated with the 10% CP gel and 0% CP gel were 2.23(0.47) and 1.74(0.16)microm, respectively, again showing no significant difference between groups (p>0.05). SEM images of the amalgam surfaces showed no apparent differences between treatments. SIGNIFICANCE: Treatment with a 10% CP gel did not significantly enhance subsequent metal ion release from dental amalgams compared to a control gel, contradicting previously published studies.
Asunto(s)
Amalgama Dental/química , Oxidantes/química , Peróxidos/química , Blanqueamiento de Dientes , Urea/análogos & derivados , Peróxido de Carbamida , Aleaciones Dentales/química , Combinación de Medicamentos , Iones/análisis , Metales/análisis , Microscopía Electrónica de Rastreo , Propiedades de Superficie , Urea/químicaRESUMEN
OBJECTIVE: Dental treatment involves the use of a wide range of materials. Many of the dental materials or their components pose a potential risk to the patient and member of the dental team. Pre-market biocompatibility testing cannot guarantee absolute safety, making monitoring of materials likely to cause an adverse reaction essential. The prevalence of adverse reactions to dental materials amongst dental patients and staff has not been systematically monitored in the UK. This project aims to develop a systematic approach to the evaluation and monitoring of the extent and severity of adverse reactions to dental materials in the UK. METHOD: Through the distribution of reporting forms to dental surgeries and laboratories in the UK, the ARRP has received 1,075 complete reports relating to adverse reactions seen or experienced by dental staff and patients. RESULTS: The main findings were that different materials cause adverse reactions to different groups of people. The largest proportion of patient related adverse reactions were reported to be due to metals (n = 175). These were mainly amalgam associated oral lichenoid reactions (n = 124). Dental technicians reported acrylic resin as the causal factor of hand dermatitis in 61% (44 out of a total 72) of cases reported. Finally, dental surgery staff reported gloves as causing hand dermatitis in 75% of cases (398 out of a total 531). CONCLUSIONS: Different dental materials affect different person groups depending on their exposure to the material. Dental staff are most at risk from an adverse reaction to latex gloves, whereas most reported reactions for patients were due to metals. For dental technicians the biggest danger of an adverse reaction was from acrylic resins. There is a need to continue to raise the awareness among dental professionals of the existence of the Adverse Reactions Reporting Project so as to overcome problems of under-reporting.
Asunto(s)
Sistemas de Registro de Reacción Adversa a Medicamentos , Materiales Dentales/efectos adversos , Resinas Acrílicas/efectos adversos , Sistemas de Registro de Reacción Adversa a Medicamentos/estadística & datos numéricos , Aleaciones Dentales/efectos adversos , Amalgama Dental/efectos adversos , Auxiliares Dentales/estadística & datos numéricos , Consultorios Odontológicos/estadística & datos numéricos , Técnicos Dentales/estadística & datos numéricos , Dermatitis Profesional/epidemiología , Femenino , Guantes Quirúrgicos/efectos adversos , Dermatosis de la Mano/epidemiología , Humanos , Laboratorios Odontológicos/estadística & datos numéricos , Liquen Plano Oral/epidemiología , Masculino , Seguridad , Reino Unido/epidemiologíaRESUMEN
The effects of devitrification of an ionomer glass with a molar composition 4.5SiO(2).3Al(2)O(3).1.5P(2)O(5).3CaO.2CaF(2) on cement formation and in vitro biocompatibility were investigated. Differential thermal analysis was used to study the phase evolution in the glass, and to determine the heat treatments for production of glass-ceramics. X-ray diffraction patterns from glass frit heat-treated at 750 degrees C for 2h contained peaks corresponding to apatite (JCPDS 15-876), whereas for samples heat-treated at 950 degrees C for 2h apatite and mullite (JCPDS 15-776) were the major phases detected. Transmission electron microscopy (TEM) confirmed that apatite and apatite-mullite phases were present after heat treatments at 750 degrees C and 950 degrees C respectively. Glass and glass-ceramics were ground to prepare <45microm powders and glass ionomer cements were produced using a ratio of 1g powder: 0.2g PAA: 0.3g 10% m/v tartaric acid solution in water. In vitro biocompatibility was evaluated using cultured rat osteosarcoma (ROS) cells. Scanning electron microscopy (SEM) showed that cells colonised the surfaces of cements prepared using untreated ionomer glass and glass crystallised to form apatite (750 degrees C/2h). However, quantitative evaluation using MTT and total protein assays indicated that more cell growth occurred in the presence of cements prepared using ionomer glasses crystallised to apatite than cements prepared using untreated glass. The least cell growth and respiratory activity was observed on cements made with crystallised glass containing both apatite and mullite. It was concluded that the controlled devitrification of ionomer glasses could be used to produce GIC bone cements with improved biocompatibility.
Asunto(s)
Materiales Biocompatibles/química , Materiales Biocompatibles/farmacología , Cristalización/métodos , Cementos de Ionómero Vítreo/química , Cementos de Ionómero Vítreo/farmacología , Calor , Osteosarcoma/metabolismo , Osteosarcoma/ultraestructura , Animales , Materiales Biocompatibles/síntesis química , División Celular/efectos de los fármacos , Línea Celular Tumoral , Cementos de Ionómero Vítreo/síntesis química , Ensayo de Materiales , Conformación Molecular , Transición de Fase , RatasRESUMEN
OBJECTIVE: To assess the surface roughness (R(a)) of two castable glass-ceramic materials, cast using four different investment materials and employing different ceramming regimes. METHODS: Forty discs, each 12 mm diameter and 2 mm thick were produced from two castable glass-ceramic materials, one a glass ionomer derivative based on 1.5SiO(2)-1Al(2)O(3)-0.53P(2)O(5)-1CaO-0.67CaF(2) (LG112), the other a fluorcanasite material based on 0.60SiO(2)-0.05K(2)O-0.10Na(2)O-0.15CaO-0.10CaF(2) (SG3). The discs were made using four dental investments, two gypsum-bonded (Whip-Mix Cristobalite (WMC), Degussa California (DC)) and two phosphate-bonded (Fujivest Super (FS), Techceram Glass (TG)). A Ni-Cr metal/ceramic alloy (Wiron 99) was also used as a control. Each investment was used to produce 10 discs for each glass-ceramic material, five left in the as-cast, glass state, the other five cerammed. Ceramming was carried out either within the investment mold or after de-vesting from the investment mold. The discs had their surface roughness values measured using a stylus, surface contact measuring instrument. RESULTS: For the Ni-Cr alloy the phosphate-bonded investments produced discs significantly smoother than those produced by the two gypsum-bonded investments (p<0.05). The FS investment produced the smoothest discs (p<0.05), but there was no significant difference between the discs produced by the two gypsum-bonded investments (p>0.05). For the SG3 material no significant differences were seen between the as-cast glass and cerammed discs (p>0.05), with the WMC investment producing the smoothest discs (p<0.05), and the TG investment the roughest (p<0.05). The LG112 material showed a significant difference between glass and cerammed discs for the gypsum-bonded investments (p<0.05) but not when using phosphate-bonded investments (p>0.05). With LG112 the WMC investment produced smoother discs than the DC and TG investments (p<0.05). The DC investment produced rougher discs than the two phosphate-bonded investments (p<0.05). SIGNIFICANCE: The selection of investment material can have a significant effect on the as-cast surface finish of castable glass-ceramic materials. A gypsum-bonded investment material gave smoother surface finishes compared to phosphate-bonded investments. The ceramming process significantly increases surface roughness.