RESUMEN
The aim of this pilot-study was to investigate the safety, feasibility and tolerability of an assisted mobilization of patients with advanced pulmonary diseases, using a lightweight, exoskeleton-type robot (Myosuit, MyoSwiss AG, Zurich, Switzerland). Ten patients performed activities of daily life (ADL) both with and without the device. The mean age was 53.6 (±5.6) years; 70% were male. The assessment of outcome included the evaluation of vital signs, adverse events, rates of perceived exertion and dyspnea (PRE, PRD), the ability to perform ADL and the individual acceptability. Robotic-assisted mobilization was feasible in all patients. No adverse events occurred. RPE and RPD showed no significant difference with or without the Myosuit (mean difference in RPE -1.7, 95%-confidence interval (CI) -1.16, 4.49; p = 0.211; mean difference in RPD 0.00, 95%-CI -1.88, 1.88; p = 0.475). 80% of patients were interested to participate in a robotic-assisted training on a regular basis. A robotic exoskeleton-assisted mobilization is safe, feasible, well-tolerated and well-accepted. The results are highly encouraging to further pursue this highly innovative approach.
Asunto(s)
Enfermedades Pulmonares , Modalidades de Fisioterapia , Femenino , Humanos , Masculino , Persona de Mediana Edad , Modalidades de Fisioterapia/instrumentación , Proyectos Piloto , Dispositivos Electrónicos Vestibles , Enfermedades Pulmonares/rehabilitaciónRESUMEN
Objective.Lower-limb amputees suffer from a variety of health problems, including higher metabolic consumption and low mobility. These conditions are linked to the lack of a natural sensory feedback (SF) from their prosthetic device, which forces them to adopt compensatory walking strategies that increase fatigue. Recently, both invasive (i.e. requiring a surgery) and non-invasive approaches have been able to provide artificial sensations via neurostimulation, inducing multiple functional and cognitive benefits. Implants helped to improve patient mobility and significantly reduce their metabolic consumption. A wearable, non-invasive alterative that provides similar useful health benefits, would eliminate the surgery related risks and costs thereby increasing the accessibility and the spreading of such neurotechnologies.Approach.Here, we present a non-invasive SF system exploiting an optimally-calibrated (just noticeable difference-based) electro-cutaneous stimulation to encode intensity-modulated foot-ground and knee angle information personalized to the user's just noticeable perceptual threshold. This device was holistically evaluated in three transfemoral amputees by examination of metabolic consumption while walking outdoors, walking over different inclinations on a treadmill indoors, and balance maintenance in reaction to unexpected perturbation on a treadmill indoors. We then collected spatio-temporal parameters (i.e. gait dynamic and kinematics), and self-reported prosthesis confidence while the patients were walking with and without the SF.Main results.This non-invasive SF system, encoding different distinctly perceived levels of tactile and knee flexion information, successfully enabled subjects to decrease metabolic consumption while walking and increase prosthesis confidence. Remarkably, more physiological walking strategies and increased stability in response to external perturbations were observed while walking with the SF.Significance.The health benefits observed with the use of this non-invasive device, previously only observed exploiting invasive technologies, takes an important step towards the development of a practical, non-invasive alternative to restoring SF in leg amputees.
Asunto(s)
Amputados , Miembros Artificiales , Fenómenos Biomecánicos , Retroalimentación , Marcha/fisiología , Humanos , Diseño de Prótesis , Caminata/fisiologíaRESUMEN
AIMS: The aim of this pilot study was to investigate the safety, feasibility, tolerability, and acceptability of an assisted mobilization of advanced heart failure patients, using a lightweight, exoskeleton-type robot (Myosuit, MyoSwiss AG, Zurich, Switzerland). METHODS AND RESULTS: Twenty patients in functional NYHA class III performed activities of daily life (ADL, n = 10) or participated in a single, standardized, 60 min rehabilitation exercise unit (REU, n = 10) with and without the Myosuit. The outcome assessment included the evaluation of vital signs, adverse events, rates of perceived exertion and dyspnoea (RPE, RPD), the ability to perform ADL or REU, and the individual acceptability. The mean age of the subjects was 49.4 (±11.0) years; 80% were male. The mean left ventricular ejection fraction was 22.1% (±7.4%) and the median NT-proBNP 2054 pg/mL (IQR 677, 3270 pg/mL). In all patients, mobilization with the Myosuit was feasible independently or with minor support. The mean individual difference in the total walking distance of the patients without and with robotic assistance was -26.5 m (95% confidence interval (CI) -142 to 78 m, P = 0.241). No adverse events occurred. RPE and RPD showed no significant difference with or without the device (ADL: RPE -0.1 m, 95% CI -1.42 to 1.62, P = 0.932 and RPD -0.95 m, 95% CI -0.38 to 2.28, P = 0.141; REU: RPE 1.1 m, 95% CI -2.90 to 0.70, P = 0.201 and RPD 0.5 m, 95% CI -2.02 to 1.02, P = 0.435). All median responses in the acceptability questionnaire were positive. The patients felt safe and enjoyed the experience; 85% would be interested in participating in robot-assisted training on a regular basis. CONCLUSION: This feasibility pilot trial provides first indications that a robotic exoskeleton-assisted mobilization of patients with advanced heart failure is safe, feasible, well-tolerated, and well-accepted. The results are highly encouraging to further pursue this innovative approach in rehabilitation programmes. This trial was registered at ClinicalTrials.gov: NCT04839133.
Asunto(s)
Insuficiencia Cardíaca , Dispositivos Electrónicos Vestibles , Adulto , Estudios de Factibilidad , Femenino , Insuficiencia Cardíaca/terapia , Humanos , Masculino , Persona de Mediana Edad , Proyectos Piloto , Volumen Sistólico/fisiología , Función Ventricular Izquierda/fisiologíaRESUMEN
BACKGROUND: Wearable robots have been shown to improve the efficiency of walking in diverse scenarios. However, it is unclear how much practice is needed to fully adapt to robotic assistance, and which neuromotor processes underly this adaptation. Familiarization strategies for novice users, robotic optimization techniques (e.g. human-in-the-loop), and meaningful comparative assessments depend on this understanding. METHODS: To better understand the process of motor adaptation to robotic assistance, we analyzed the energy expenditure, gait kinematics, stride times, and muscle activities of eight naïve unimpaired participants across three 20-min sessions of robot-assisted walking. Experimental outcomes were analyzed with linear mixed effect models and statistical parametric mapping techniques. RESULTS: Most of the participants' kinematic and muscular adaptation occurred within the first minute of assisted walking. After ten minutes, or 880 steps, the energetic benefits of assistance were realized (an average of 5.1% (SD 2.4%) reduction in energy expenditure compared to unassisted walking). Motor adaptation was likely driven by the formation of an internal model for feedforward motor control as evidenced by the reduction of burst-like muscle activity at the cyclic end of robotic assistance and an increase in arm-swing asymmetry previously associated with increased cognitive load. CONCLUSION: Humans appear to adapt to walking assistance from a wearable robot over 880 steps by forming an internal model for feedforward control. The observed adaptation to the wearable robot is well-described by existing three-stage models that start from a cognitive stage, continue with an associative stage, and end in autonomous task execution. Trial registration Not applicable.
Asunto(s)
Dispositivo Exoesqueleto , Dispositivos Electrónicos Vestibles , Adaptación Fisiológica , Marcha/fisiología , Humanos , Proyectos Piloto , Caminata/fisiologíaRESUMEN
Passive spring-like structures can store and return energy during cyclic movements and thereby reduce the energetic cost of locomotion. That makes them important components of the human body and wearable assistive devices alike. This study investigates how springs placed anteriorly across the hip joint affect leg joint angles and powers, and leg muscle activities during level walking at 0.5 to 2.1â¯m/s. We hypothesized that the anterior hip springs (I) load hip extension, (II) support hip flexion and (III) affect ankle muscle activity and dynamics during walking. Effects at the ankle were expected because hip and ankle redistribute segmental power in concert to achieve forward progression. We observed that the participants' contribution to hip power did not increase during hip extension as the spring stored energy. Simultaneously, the activities of plantarflexor muscles that modulate energy storage in the Achilles tendon were reduced by 28% (gastrocnemius medialis) and 9% (soleus). As the spring returned energy with the onset of hip flexion, the participants' contribution to hip power was reduced by as much as 23%. Soleus activity before push-off increased by up to 9%. Instead of loading hip extension, anterior hip springs seem to store and return parts of the energy normally exchanged with the Achilles tendon. Thereby, the springs support hip flexion but may reduce elastic energy storage in and hence recoil from the Achilles tendon. This interaction should be considered during the design and simulation of wearable assistive devices as it might - depending on user characteristics - enhance or diminish their overall functionality.
Asunto(s)
Articulación de la Cadera/fisiología , Fenómenos Mecánicos , Caminata , Tobillo/fisiología , Fenómenos Biomecánicos , Femenino , Humanos , Masculino , Músculo Esquelético/fisiologíaRESUMEN
Wearable robots for the legs have been developed for gait rehabilitation training and as assistive devices. Most devices have been rigid exoskeletons designed to substitute the function of users who are completely paralyzed. While effective for this target group, exoskeletons limit their users' contributions to movements. Soft wearable robots have been suggested as an alternative that allows, and requires, active contributions from users with residual mobility.In this work, we first tested if the MyoSuit, a lightweight, lower-limb soft wearable robot, affected the walking kinematics of unimpaired users. Secondly, we evaluated the assistance delivered to a patient with a gait impairment.In our first study, 10 unimpaired participants walked on a treadmill at speeds between 0.5 and 1.3 m/s. We found that wearing the MyoSuit in its transparency mode did not affect the participants' walking kinematics (RMS difference of joint angles < 1.6°). Step length and the ratio of stance-to-stride duration were not affected when wearing the MyoSuit.In our case study with one spinal cord injured participant, the MyoSuit supported the participant to increase his 10 MWT walking speed from 0.36 to 0.52 m/s, a substantial clinically meaningful improvement.Our results show that the MyoSuit allows user-driven, kinematically unaltered walking and provides effective assistance. Systems like the MyoSuit are a promising technology to bridge the gap between rigid exoskeletons and unassisted ambulation.
Asunto(s)
Dispositivos de Autoayuda , Caminata/fisiología , Adulto , Algoritmos , Femenino , Marcha , Humanos , Articulaciones/fisiología , Masculino , Persona de Mediana Edad , Adulto JovenRESUMEN
Knit, woven, and nonwoven fabrics offer a diverse range of stretch and strain limiting mechanical properties that can be leveraged to produce tailored, whole-body deformation mechanics of soft robotic systems. This work presents new insights and methods for combining heterogeneous fabric material layers to create soft fabric-based actuators. This work demonstrates that a range of multi-degree-of-freedom motions can be generated by varying fabrics and their layered arrangements when a thin airtight bladder is inserted between them and inflated. Specifically, we present bending and straightening fabric-based actuators that are simple to manufacture, lightweight, require low operating pressures, display a high torque-to-weight ratio, and occupy a low volume in their unpressurized state. Their utility is demonstrated through their integration into a glove that actively assists hand opening and closing.