Diamond with Sp2-Sp3 composite phase for thermometry at Millikelvin temperatures.

Temperature is one of the seven fundamental physical quantities. The ability to measure temperatures approaching absolute zero has driven numerous advances in low-temperature physics and quantum physics. Currently, millikelvin temperatures and below are measured through the characterization of a certain thermal state of the system as there is no traditional thermometer capable of measuring temperatures at such low levels. In this study, we develop a kind of diamond with sp2-sp3 composite phase to tackle this problem. The synthesized composite phase diamond (CPD) exhibits a negative temperature coefficient, providing an excellent fit across a broad temperature range, and reaching a temperature measurement limit of 1 mK. Additionally, the CPD demonstrates low magnetic field sensitivity and excellent thermal stability, and can be fabricated into probes down to 1 micron in diameter, making it a promising candidate for the manufacture of next-generation cryogenic temperature sensors. This development is significant for the low-temperature physics researches, and can help facilitate the transition of quantum computing, quantum simulation, and other related technologies from research to practical applications.

Multimaterial 3D and 4D Bioprinting of Heterogenous Constructs for Tissue Engineering.

Additive manufacturing (AM), which is based on the principle of layer-by-layer shaping and stacking of discrete materials, has shown significant benefits in the fabrication of complicated implants for tissue engineering (TE). However, many native tissues exhibit anisotropic heterogenous constructs with diverse components and functions. Consequently, the replication of complicated biomimetic constructs using conventional AM processes based on a single material is challenging. Multimaterial 3D and 4D bioprinting (with time as the fourth dimension) has emerged as a promising solution for constructing multifunctional implants with heterogenous constructs that can mimic the host microenvironment better than single-material alternatives. Notably, 4D-printed multimaterial implants with biomimetic heterogenous architectures can provide a time-dependent programmable dynamic microenvironment that can promote cell activity and tissue regeneration in response to external stimuli. This paper first presents the typical design strategies of biomimetic heterogenous constructs in TE applications. Subsequently, the latest processes in the multimaterial 3D and 4D bioprinting of heterogenous tissue constructs are discussed, along with their advantages and challenges. In particular, the potential of multimaterial 4D bioprinting of smart multifunctional tissue constructs is highlighted. Furthermore, this review provides insights into how multimaterial 3D and 4D bioprinting can facilitate the realization of next-generation TE applications.

Soft, Bistable Actuators for Reconfigurable 3D Electronics.

Existing strategies for reconfigurable three-dimensional (3D) electronics are greatly constrained by either the complicated driven mechanisms or harsh demands for conductive materials. Developing a simple and robust strategy for 3D electronics reconstruction and function extension remains a challenge. Here, we propose a solvent-driven bistable actuator, which acts as a substrate to reconstruct the combined 3D electronic device. Extraction of silicon oil from a hybrid poly(dimethylsiloxane) (PDMS) circle sheet buckles the dish to a bistable structure. The ultraviolet (UV)/ozone treatment on one surface of the PDMS structure introduces an oxidized layer, yielding a bilayered, solvent-driven bistable smart actuator. The snap-back stimulus to the oxidized layer differs from the snap-through stimulus. Experimental and numerical studies reveal the fundamental regulations for buckling configurations and the bistable behavior of the actuator. The prepared bistable actuator drives the bonded kirigami polyimide (PI) sheets to diverse 3D structures from the original bending configuration, reversibly. A frequency-reconfigurable electrically small monopole antenna is presented as a demonstration, which paves a way for the applications of this actuator in the field of reconfigurable 3D electronics.

Sandwich-interface inspired strategy for controlled formation of nanoparticles.

Nanoparticles are functional materials able to offer improved or new synergetic properties. By manipulating the interfacial properties, we demonstrate an innovative sandwich-interface method capable of forming various monodispersed nanostructures including metals, semiconductors, and inorganic and coordinated nanoparticles. By analysing of the reaction mechanism, we show that reaction time, the height of transition and presence of surfactant have the greatest influence on the formation of the products. These advances in the sandwich-interface synthesis significantly extend the scope of interface synthetic methods, facilitating a new level of structural-architectural control which may lead to future developments in the field of crystallography.

Wet-spinning fabrication of shear-patterned alginate hydrogel microfibers and the guidance of cell alignment.

Native tissue is naturally comprised of highly-ordered cell-matrix assemblies in a multi-hierarchical way, and the nano/submicron alignment of fibrous matrix is found to be significant in supporting cellular functionalization. In this study, a self-designed wet-spinning device appended with a rotary receiving pool was used to continuously produce shear-patterned hydrogel microfibers with aligned submicron topography. The process that the flow-induced shear force reshapes the surface of hydrogel fiber into aligned submicron topography was systematically analysed. Afterwards, the effect of fiber topography on cellular longitudinal spread and elongation was investigated by culturing rat neuron-like PC12 cells and human osteosarcoma MG63 cells with the spun hydrogel microfibers, respectively. The results suggested that the stronger shear flow force would lead to more distinct aligned submicron topography on fiber surface, which could induce cell orientation along with fiber axis and therefore form the cell-matrix dual-alignment. Finally, a multi-hierarchical tissue-like structure constructed by dual-oriented cell-matrix assemblies was fabricated based on this wet-spinning method. This work is believed to be a potentially novel biofabrication scheme for bottom-up constructing of engineered linear tissue, such as nerve bundle, cortical bone, muscle and hepatic cord.