RESUMEN
High stretchability and sensitivity of strain sensors are two properties that are very difficult to combine together into one material, due to the intrinsic dilemma of the opposite requirements of robustness of the conductive network. Therefore, the improvement of one property is always achieved at the expense of decreasing the other property, and preventing its practical application. Inspired by the micro-structure of the copolymer, which consists of stretchable amorphous and strong crystal domains, we developed a highly stretchable and sensitive strain sensor, based on innovative gradient carbon nanotubes (CNTs). By integrating randomly oriented and well aligned CNTs, acting as sensitive and stretchable conductive elements, respectively, into a continuous changing structure, our strain sensors successfully combine both a high sensitivity (gauge factor (GF) = 13.5) and ultra-stretchability (>550%). With a fast response speed (<33 ms) and recovery speed (<60 ms), lossless detection of a 8 Hz mechanical signal has been easily realized. In addition, the gradient CNTs strain sensors also showed great durability in a dynamic test of 12 000 cycles, as well as extraordinary linearity and ultra-low working voltage (10 mV). These outstanding features mean our sensors have enormous potential for applications in health monitoring, sports performance monitoring and soft robotics.
RESUMEN
Flexible pressure sensors are of great importance to be applied in artificial intelligence and wearable electronics. However, assembling a simple structure, high-performance capacitive pressure sensor, especially for monitoring the flow of liquids, is still a big challenge. Here, on the basis of a sandwich-like structure, we propose a facile capacitive pressure sensor optimized by a flexible, low-cost nylon netting, showing many merits including a high response sensitivity (0.33 kPa-1) in a low-pressure regime (<1 kPa), an ultralow detection limit as 3.3 Pa, excellent working stability after more than 1000 cycles, and synchronous monitoring for human pulses and clicks. More important, this sensor exhibits an ultrafast response speed (<20 ms), which enables its detection for the fast variations of a small applied pressure from the morphological changing processes of a droplet falling onto the sensor. Furthermore, a capacitive pressure sensor array is fabricated for demonstrating the ability to spatial pressure distribution. Our developed pressure sensors show great prospects in practical applications such as health monitoring, flexible tactile devices, and motion detection.
Asunto(s)
Grafito/química , Nylons , Porosidad , Presión , TactoRESUMEN
Pressure sensing is a crucial function for flexible and wearable electronics, such as artificial skin and health monitoring. Recent progress in material and device structure of pressure sensors has brought breakthroughs in flexibility, self-healing, and sensitivity. However, the fabrication process of many pressure sensors is too complicated and difficult to integrate with traditional silicon-based Micro-Electro-Mechanical System(MEMS). Here, this study demonstrates a scalable and integratable contact resistance-based pressure sensor based on a carbon nanotube conductive network and a photoresist insulation layer. The pressure sensors have high sensitivity (95.5 kPa-1 ), low sensing threshold (16 Pa), fast response speed (<16 ms), and zero power consumption when without loading pressure. The sensitivity, sensing threshold, and dynamic range are all tunable by conveniently modifying the hole diameter and thickness of insulation layer.