Effects of Heat Stress in Dairy Cows Raised in the Confined System: A Scientometric Review.

Due to climate change, heat stress is a growing problem for the dairy industry. Based on this, annual economic losses in the dairy sector are verified mainly on a large scale. Despite several publications on thermal stress in lactating dairy cows in confinement systems, there need to be published reviews addressing this issue systematically. Our objective was to scientometrically analyze the effects of heat stress in dairy cows managed in a confinement system. Based on PRISMA guidelines, research articles were identified, screened, and summarized based on inclusion criteria for heat stress in a confinement system. Data was obtained from the Web of Science. A total of 604 scientific articles published between 2000 and April 2022 were considered. Data was then analyzed using Microsoft Excel and CiteSpace. The results pointed to a significant increase in studies on heat stress in lactating cows housed in confinement systems. The main research areas were Agriculture, Dairy Animal Science and Veterinary Sciences. The USA showed the highest concentration of studies (31.12%), followed by China (14.90%). Emerging themes included heat stress and behavior. The most influential journals were the Journal of Dairy Science and the Journal of Animal Science. The top authors were L. H. Baumgard and R. J. Collier. The leading institutions were the Chinese Academy of Agricultural Sciences, followed by the State University System of Florida and the University of Florida. The study maps the significant research domains on heat stress of lactating cows in confinement systems, discusses implications and explanations and highlights emerging trends.

Influence of COD in Toxic Industrial Wastewater from a Chemical Concern on Nitrification Efficiency.

COD is an arbitrary indicator of the content of organic and inorganic compounds in wastewater. The aim of this research was to determine the effect of COD of industrial wastewater on the nitrification process. This research covered wastewater from acrylonitrile and styrene-butadiene rubbers, emulsifiers, polyvinyl acetate, styrene, solvents (butyl acetate, ethyl acetate) and owipian® (self-extinguishing polystyrene intended for expansion) production. The volume of the analyzed wastewater reflected the active sludge load in the real biological treatment system. This research was carried out by the method of short-term tests. The nitrification process was inhibited to the greatest extent by wastewater from the production of acrylonitrile (approx. 51%) and styrene-butadiene (approx. 60%) rubbers. In these wastewaters, nitrification inhibition occurred due to the high COD load and the presence of inhibitors. Four-fold dilution of the samples resulted in a two-fold reduction in the inhibition of nitrification. On the other hand, in the wastewater from the production of emulsifiers and polyvinyl acetate, a two-fold reduction in COD (to the values of 226.4 mgO2·dm-3 and 329.8 mgO2·dm-3, respectively) resulted in a significant decrease in nitrification inhibition. Wastewater from the production of styrene, solvents (butyl acetate, ethyl acetate) and owipian® inhibited nitrification under the influence of strong inhibitors. Lowering the COD value of these wastewaters did not significantly reduce the inhibition of nitrification.

Spatio-Thermal Variability and Behaviour as Bio-Thermal Indicators of Heat Stress in Dairy Cows in a Compost Barn: A Case Study.

The spatial variability and behavioural aspects of compost-bedded pack barns remain unknown in subtropical regions. In this study, we investigated whether spatial variability occurs in the thermal environment of a compost barn and how the behaviour of dairy cows with different numbers of lactations differs in this system. The spatial sampling design comprised a grid of 108 locations inside the facility. At each location, we measured air temperature, relative humidity, wind speed, and bed temperature at 9:00, 12:00, and 15:00. We performed 24-h behavioural observations. Regarding spatial variability, the north face showed high air temperature values, and the distribution of relative humidity varied from the north to the south face. Kriging maps revealed a high bedding temperature trend, indicating heterogeneous ventilation management. Primiparous cows visited the water trough during the hottest hours of the day, whereas multiparous cows displayed a higher probability of walking during these periods. In conclusion, we observed a heterogeneous management of ventilation through the spatial distribution of the thermal environment inside the compost-bedded pack barn, with multiparous cows exhibiting dominance over primiparous cows seeking environmental resources.

Use of Different Cooling Methods in Pig Facilities to Alleviate the Effects of Heat Stress-A Review.

An increase in the frequency of hot periods, which has been observed over the past decades, determines the novel approach to livestock facilities improvement. The effects of heat stress are revealed in disorders in physiological processes, impaired immunity, changes in behaviour and decreases in animal production, thus implementation of cooling technologies is a key factor for alleviating these negative consequences. In pig facilities, various cooling methods have been implemented. Air temperature may be decreased by using adiabatic cooling technology such as a high-pressure fogging system or evaporative pads. In modern-type buildings large-surface evaporative pads may support a tunnel ventilation system. Currently a lot of attention has also been paid to developing energy- and water-saving cooling methods, using for example an earth-air or earth-to-water heat exchanger. The pigs' skin surface may be cooled by using sprinkling nozzles, high-velocity air stream or conductive cooling pads. The effectiveness of these technologies is discussed in this article, taking into consideration the indicators of animal welfare such as respiratory rate, skin surface and body core temperature, performance parameters and behavioural changes.

Effects of Environmental Enrichment on Pig Welfare-A Review.

Good husbandry conditions on farms is of key importance for assuring animal welfare. One of the most important legal documents regulating the rules of maintaining pigs is the Directive 2008/120/EC, which states that group-housed pigs should have access to litter or other materials that provide exploration and occupation. Released in 2016, the Commission Recommendation (EU) 2016/336 on the application of the Council Directive 2008/120/EC characterizes the various categories of materials that may be used to improve animal welfare. According to the document, straw is considered as an optimal material for pig housing, however, materials categorized as suboptimal (e.g., wood bark) and materials of marginal interest (e.g., plastic toys) are often used in practice and scientific research. As such, the aim of this paper is to review and systematize the current state of knowledge on the topic of the impact of environmental enrichment on pig welfare. This article raises mainly issues, such as the effectiveness of the use of various enrichment on the reduction of undesirable behavior-tail biting; aggression; and stereotypies at the pre-weaning, post-weaning, and fattening stage of pig production.

Measurements of peripheral and deep body temperature in cattle - A review.

Automation of the measurement of the physiological and behavioural parameters of livestock has become an important goal for both scientists and farmers. Accurate data and knowledge about farmed animals, especially in cattle breeding, are needed. Proper early diagnosis of a cow's health status in real time allows for preventing the development of infection, oestrus detection and leads to reduced environmental stress. Thus, it contributes to more effective herd management. Among the physiological parameters, body temperature and its fluctuations are key indicators of health and well-being in animals. Currently, along with the development of technical solutions and their implementation, increasingly more attention is being paid to the continuously measurement of body core and peripheral temperature in animals. Recently there has been an increased number of publications devoted to this subject. However, there is a need to systematise this knowledge as these studies have had different purposes, have been performed in various environmental conditions, and the measurements were taken using different methods and equipment. As such, the results obtained by the different authors often may not be comparable. For this reason, this paper has two main purposes: to present the most widely used continuous methods of peripheral and body core temperature measurement, and to show its references values which characterise the individual locations of the cattle body in thermoneutral ambient. An analysis of the professional publications regarding measurements of peripheral and deep body temperature led to the conclusion that these methods have high research and diagnostic potential. However, it is necessary to standardised research to enable better and more comparable results, including among others; different cattle groups, animal age, health and environmental conditions.

Environmental parameters to assessing of heat stress in dairy cattle-a review.

Considering the significant influence of high ambient temperature and heat waves on the well-being and productivity of dairy cows, it is to be expected that, in the course of the next few decades, climate conditions for raising cattle will deteriorate. Research has shown that heat stress causes many negative consequences in terms of physiological and behavioural disturbances and significant losses in milk production. The effort to reduce the risk of the occurrence of heat stress among dairy cows also involves the search for new environmental methods of predicting heat stress. The aim of this paper is to review and systematise the current state of knowledge on the topic of the most widely used environmental methods of determining and predicting heat stress in dairy cows and also to show the directions of studies for the future. Based on an analysis of the most popular indexes, the study evaluated their suitability for forecasting heat stress related to maintenance systems and climate conditions for cows. However, the negative results of heat stress often appear with a delay, and a carry-over effect may be experienced (summer heat stress may affect the cows until autumn). The time of the year and breed of cows could have a big impact on when animals become sensitive to increasing heat loads. This likely can be a big contributor to the discrepancies within the different heat stress equations. It is essential to prevent the occurrence of heat stress, predicting it by observing local microclimate conditions and using meteorological forecasts. Thanks to these measures, a breeder may prepare and implement suitable solutions for protecting the animals.