Synthesis and self-assembling of hyaluronan grafted with ceramide NP for topical drug delivery.

In this work, amphiphilic hyaluronan was synthesized by grafting succinylated N-oleoyl-phytosphingosine via esters bonds. Succinylated N-oleoyl-phytosphingosine (sCER) was first prepared by esterification of hydroxyl moieties of the ceramide with succinic anhydride. The esterification of hyaluronan was governed by crowding effect. The oligomeric HA-sCER derivatives exhibited a strong self-aggregation as evidenced by a very low critical aggregation concentration (1.9 µg mL-1), higher pyrene binding constant (KB), and the smallest particle size (30 nm) in solution. The self-aggregation properties demonstrated to be a function of the substitution degree and molecular weight of HA. The prepared derivatives were non-cytotoxic towards cell lines NIH-3T3. Nanoparticles prepared using oligomeric HA-sCER derivatives improved the penetration of Nile red dye through the stratum corneum due to their smaller size (≤50 nm). The fluorescence intensity localized at the stratum corneum was higher for oligomeric HA-sCER. A significant inhibition of the pro-inflammatory cytokine interleukin-6 production was observed in vitro in macrophages differentiated from THP-1 cells. These findings showed that HA-sCER constituted a promising active ingredient for cosmetics use.

Modified hyaluronic acid with enhanced resistance to degradation.

A mild and efficient reduction of negatively charged glucuronate units of hyaluronic acid (HA) into less polar glucose units has not been reported yet. However, this modification could significantly affect physical and chemical properties. Here we show a one-pot procedure where HA is converted into its derivate with carboxyl groups reduced to primary alcohols (HA-Red) without severe polymer degradation. Optimized synthesis aimed at aqueous solutions allowed the preparation of polysaccharides with molecular weights up to 1000 kDa. The chemical structure of HA-Red was proved by 2-dimensional NMR methodologies, FT-IR, LC-MS and SECMALLS. The final materials were exposed to a higher temperature or digested with bovine testicular hyaluronidase (BTH). Obtained data proved higher stability of HA-Red compared to HA, and significant dependence of stability on the degree of modification was observed in most cases. Preliminary in vitro studies showed no negative effects of HA-Red on the growth of 3T3 fibroblasts, which may be promising for applications requiring biodegradable and biocompatible HA derivatives with increased resistance to degradation.

Preparation of hyaluronan oligosaccharides by a prokaryotic beta-glucuronidase: Characterization of free and immobilized forms of the enzyme.

Popularity of hyaluronan (HA) in the cosmetics and pharmaceutical industries, led to the investigation and development of new HA-based materials, with enzymes playing a key role. Beta-D-glucuronidases catalyze the hydrolysis of a beta-D-glucuronic acid residue from the non-reducing end of various substrates. However, lack of specificity towards HA for most beta-D-glucuronidases, in addition to the high cost and low purity of those active on HA, have prevented their widespread application. In this study, we investigated a recombinant beta-glucuronidase from Bacteroides fragilis (rBfGUS). We demonstrated the rBfGUS's activity on native, modified, and derivatized HA oligosaccharides (oHAs). Using chromogenic beta-glucuronidase substrate and oHAs, we characterized the enzyme's optimal conditions and kinetic parameters. Additionally, we evaluated rBfGUS's activity towards oHAs of various sizes and types. To increase reusability and ensure the preparation of enzyme-free oHA products, rBfGUS was immobilized on two types of magnetic macroporous bead cellulose particles. Both immobilized forms of rBfGUS demonstrated suitable operational and storage stabilities, and their activity parameters were comparable to the free form. Our findings suggest that native and derivatized oHAs can be prepared using this bacterial beta-glucuronidase, and a novel biocatalyst with enhanced operational parameters has been developed with a potential for industrial use.

Molecular weight and gut microbiota determine the bioavailability of orally administered hyaluronic acid.

The ability of hyaluronan as a dietary supplement to increase skin moisture and relieve knee pain has been demonstrated in several clinical studies. To understand the mechanism of action, determining hyaluronan's bioavailability and in vivo fate is crucial. Here, we used 13C-hyaluronan combined with LC-MS analysis to compare the absorption and metabolism of oral hyaluronan in germ-free and conventional wild-type mice. The presence of Bacteroides spp. in the gut was crucial for hyaluronan absorption. Specific microorganisms cleave hyaluronan into unsaturated oligosaccharides (<3 kDa) which are partially absorbed through the intestinal wall. The remaining hyaluronan fragments are metabolized into short-chain fatty acids, which are only metabolites available to the host. The poor bioavailability (~0.2 %) of oral hyaluronan indicates that the mechanism of action is the result of the systematic regulatory function of hyaluronan or its metabolites rather than the direct effects of hyaluronan at distal sites of action (skin, joints).

Intraperitoneally administered native and lauroyl-modified hyaluronan films: Pharmacokinetic and metabolism studies.

Hyaluronan is being investigated extensively as a biocompatible and biodegradable material for use in biomedical applications. While the derivatization of hyaluronan broadens its potential therapeutic use, the pharmacokinetics and metabolization of the derivatives must be thoroughly investigated. The fate of intraperitoneally-applied native and lauroyl-modified hyaluronan films with varying degrees of substitution was investigated in-vivo employing an exclusive stable isotope-labelling approach and LC-MS analysis. The materials were gradually degraded in peritoneal fluid, lymphatically absorbed, preferentially metabolized in the liver and eliminated without any observable accumulation in the body. Hyaluronan acylation prolongs its presence in the peritoneal cavity depending on the degree of substitution. The safety of acylated hyaluronan derivatives was confirmed via a metabolic study that revealed its degradation into non-toxic metabolites, i.e. native hyaluronan and free fatty acid. Stable isotope-labelling with LC-MS tracking comprises a high-quality procedure for the investigation of the metabolism and biodegradability of hyaluronan-based medical products in-vivo.

Water-insoluble fibres, threads, and fabrics from lauroyl derivatives of hyaluronan.

Hyaluronan (HA) is a naturally occurring polysaccharide widely used in medicine and cosmetics. To further broaden its potential, various HA derivatives have been developed with the aim of reducing solubility, slowing degradation, or providing other beneficial properties. However, for most medical applications, these derivatives must be processed into suitable forms. Here we present water-insoluble fibres prepared from lauroyl-modified HA using a wet spinning process. Important properties of the fibres, such as swelling or the degradation rate, can be fine-tuned by adjusting the degree of HA modification. Due to their mechanical properties, the lauroyl HA fibres can be easily processed into threads and subsequently into fabrics of various sizes, shapes, and degrees of porosity. In addition, in vitro cytotoxicity testing of the fibres showed that they were non-cytotoxic. Overall, our results suggest that lauroyl HA fibres are a promising material that could be used to develop a variety of medical devices.

Structure and dynamics of the hyaluronan oligosaccharides and their solvation shell in water: organic mixed solvents.

Hyaluronan (HA) is a natural polysaccharide occurring ubiquitously in the connective tissues of vertebrates widely used in the cosmetic and pharmaceutic industries. In numerous applications HA oligosaccharides are being chemically modified using reactions incompatible with aqueous solutions, often carried out in water:organic mixed solvents. We carry out molecular-dynamics (MD) simulations of HA oligosaccharides in water:1,4-dioxane and water:tert-butanol mixtures of different compositions. HA molecule causes a separation of the solvent components in its surroundings, especially in tert-butanol containing solutions, constituting thus a solvation shell enriched by water. Furthermore, interactions with ions are stronger than in pure water and depend on the solvent composition. Consequently, the dynamics of the HA chain varies with the solvent composition and causes observable conformational changes of the HA oligosaccharide. Composition of mixed solvents thus enables us to modify the interaction of HA with other molecules as well as its reactivity.

The Degradation of Hyaluronan in the Skin.

Hyaluronan (HA) comprises a fundamental component of the extracellular matrix and participates in a variety of biological processes. Half of the total amount of HA in the human body is present in the skin. HA exhibits a dynamic turnover; its half-life in the skin is less than one day. Nevertheless, the specific participants in the catabolism of HA in the skin have not yet been described in detail, despite the essential role of HA in cutaneous biology. A deeper knowledge of the processes involved will act to support the development of HA-based topical and implantable materials and enhance the understanding of the various related pathological cutaneous conditions. This study aimed to characterize the distribution and activity of hyaluronidases and the other proteins involved in the degradation of HA in healthy human full-thickness skin, the epidermis and the dermis. Hyaluronidase activity was detected for the first time in healthy human skin. The degradation of HA occurred in lysates at an acidic pH. HA gel zymography revealed a single band corresponding to approximately 50 kDa. This study provided the first comprehensive view of the distribution of canonic HA-degrading proteins (HYAL1 and HYAL2) in human skin employing IHF and IHC. Furthermore, contrary to previous assumptions TMEM2, a novel hyaluronidase, as well as CEMIP, a protein involved in HA degradation, were localized in the human epidermis, as well as in the dermis.

Adsorption/desorption behavior of hyaluronic acid fragments at charged hydrophobic surface.

This work reveals the growing potential of novel electrochemical methods that are applicable for polysaccharides. It was shown for the first time that the molecules of hyaluronic acid (HA) exhibit electrochemical response using phase-sensitive alternating current (AC) voltammetry in phase-out mode. Adsorption and desorption processes of HA fragments at a charged interface of mercury electrode were observed in buffered HA solutions. Electrostatic and hydrophobic manners of interactions were distinguished for native hyaluronan fragments in a wide electric potential range. The AC voltammetry response depended on the temperature, concentration, and length of HA chains. Results of this work open possibilities for further structural characterization of widely used HA fragments and understanding manners of interactions with charged hydrophobic surfaces that could be useful in the future for understanding HA interactions at biological levels.

Nanofibrous material from hyaluronan derivatives preserving fibrous structure in aqueous environment.

Nanofibrous materials produced from natural polymers have wide range of potential uses in regenerative medicine. This paper focuses on preparation of nanofibrous layers produced from intentionally hydrophobized derivatives of hyaluronan, which is known for its ability to promote wound healing. This structural modification of hyaluronan expands the range of potential uses of this promising material, which is otherwise limited due to the hydrophilic nature of hyaluronic acid. The aim of this research was preparation of nanofibrous material that would retain its fibrous structure and dimensional stability even after getting into contact with an aqueous medium, which is impossible to achieve with layers composed solely of native hyaluronan. As a result, such material would be able to retain its breathability and good mechanical properties when both dry and wet. Furthermore, all prepared materials were proved non-toxic for cells. This self-supporting nanofibrous matrix can be used as a scaffold, or porous wound dressing.

Insight into the Lubrication and Adhesion Properties of Hyaluronan for Ocular Drug Delivery.

Hyaluronan (HA) is widely used for eye drops as lubricant to counteract dry eye disease. High and low molecular weight HA are currently used in ophthalmology. However, a large portion of the current literature on friction and lubrication addresses articular (joint) cartilage. Therefore, eye drops compositions based on HA and its derivatized forms are extensively characterized providing data on the tribological and mucoadhesive properties. The physiochemical properties are investigated in buffers used commonly in eye drops formulations. The tribological investigation reveals that amphiphilic HA-C12 decreases the friction coefficient. At the same time, the combination of trehalose/HA or HAC12 enhances up to eighty-fold the mucoadhesiveness. Thus, it is predicted a prolonged residence time on the surface of the eye. The incorporation of trehalose enhances the protection of human keratinocytes (HaCaT) cells, as demonstrated in an in-vitro cell-desiccation model. The presence of trehalose increases the friction coefficient. Medium molecular weight HA shows significantly lower friction coefficient than high molecular weight HA. This research represents a first, wide array of features of diverse HA forms for eye drops contributing to increase the knowledge of these preparations. The results here presented also provide valuable information for the design of highly performing HA-formulations addressing specific needs before preclinic.

Lauroyl hyaluronan films for local drug delivery: Preparation and factors influencing the release of small molecules.

Lauroyl derivatives of hyaluronan are safe and biodegradable materials that seem promising for application in medicine. However, their potential in the field of drug delivery was not yet explored. We thus prepared lauroyl hyaluronan films loaded with various drugs and studied the effects of lauroyl hyaluronan properties, drug hydrophobicity and medium composition on the drug release. Since biomolecules will always be present in real clinical applications, media supplemented by albumin were also included. The amphiphilic character of lauroyl hyaluronan enabled convenient loading of the films by both hydrophilic and hydrophobic drugs. Dominant factors influencing drug release were drug hydrophobicity and the presence of albumin. Hydrophilic diclofenac was released rapidly in all cases, while triclosan with medium hydrophobicity exhibited slower release sensitive to other parameters, reaching equilibrium values in the used experimental setup. The release of hydrophobic octenidine into pure buffer was almost negligible, but the addition of albumin did promote its release. The strong effect of albumin highlights the importance of considering biomolecules in the design of release experiments.

The rate and evenness of the substitutions on hyaluronan grafted by dodecanoic acid influenced by the mixed-solvent composition.

In this work, low molecular weight (17 kDa) hyaluronan was modified by dodecanoyl substituents. The activation of dodecanoic acid was mediated by benzoyl chloride towards the preparation of a mixed anhydride, which reacts in a second step with HA in water mixed with an organic solvent. The effect of the cosolvent was studied and showed an even distribution of substituents and higher reaction rate in water: 1,4-dioxane compared to water:tert-butanol where substituents occupy adjacent positions. The chemical characterization of the prepared derivatives was elucidated by NMR, FTIR spectroscopy, thermal analyses, and gas chromatography, while the distribution of substituents was evaluated by enzymatic degradation. Molecular-dynamics simulations reveal opposite solvent separations around HA and dodecanoyl chains, that is stronger in water:tert-butanol solution. The resulting incompatibility of solvation-shells of the two entities repels the reaction intermediates from the HA chain and drives them towards the already bound substituents, explaining the observed differences in the distribution evenness. Thus, the influence of the solvent on the reaction selectivity is observed by shielding reactive sites around HA. Therefore, a control of the distribution of the substituents was obtained by defining the concentration of HA and used cosolvent.

Oleate-modified hyaluronan: Controlling the number and distribution of side chains by varying the reaction conditions.

In this work, low molecular weight hyaluronan was chemically modified by oleoyl moieties utilising mixed anhydrides methodology. The activation of oleic acid with benzoyl chloride in organic solvents miscible with water was followed by NMR spectroscopy. The product selectivity correlates with the solvent's Hildebrand solubility parameter. Furthermore, the effect of the solvent for the mixed anhydride formation was elucidated by density functional theory (DFT) and showed that the reactions are faster in acetonitrile or alcohols than in hexane. Furthermore, the solvent demonstrated to control the substituent distribution pattern along HA chain during esterification. An even distribution of substituents was observed in reactions performed in water mixed with ethers. The substituent distribution pattern clearly influenced the aggregation behaviour of amphiphilic HA, controlling the stability of the delivery system, while increasing the encapsulation capacity.

How the molecular weight affects the in vivo fate of exogenous hyaluronan delivered intravenously: A stable-isotope labelling strategy.

There is inconsistent information regarding the size effects of exogenously given hyaluronan on its in vivo fate. The data are often biased by the poor quality of hyaluronan and non-ideal labelling strategies used for resolving exogenous/endogenous hyaluronan, which only monitor the label and not hyaluronan itself. To overcome these drawbacks and establish the pharmacokinetics of intravenous hyaluronan in relation to its Mw, 13C-labelled HA of five Mws from 13.6-1562 kDa was prepared and administered to mice at doses 25-50 mg kg-1. The elimination efficiency increased with decreasing Mw. Low Mw hyaluronan was rapidly eliminated as small hyaluronan fragments in urine, while high Mw hyaluronan exhibited saturable kinetics and complete metabolization within 48 h. All tested Mws exhibited a similar uptake by liver cells and metabolization into activated sugars. 13C-labelling combined with LC-MS provides an excellent approach to elucidating in vivo fate and biological activities of hyaluronan.

Hyaluronic acid chloramide-Synthesis, chemical structure, stability and analysis of antimicrobials.

Electron-deficient chlorine covalently immobilised on an amido group of hyaluronic acid (HA) can be potentially exceptional for applications requiring biodegradable and biocompatible polymers with enhanced antibacterial or antiviral activity. This expectation is supported by the assumption that a small amount of HA chloramide (HACl) is formed in the extracellular matrix under inflammatory conditions by a reaction of endogenous HA with hypochlorous acid (HClO) generated by a myeloperoxidase/H2O2/Cl- system. HACl synthesis optimisation showed significant limitations of HClO as an oxidative agent where only lower degrees of substitution (DS) was achieved. Commercially available oxidative agents based on chlorinated isocyanuric acid were successfully tested, producing the HA chain with almost entirely chlorinated amidic groups. The structure of the final HACl was thoroughly studied using advanced 2-dimensional NMR methodologies and LC/MS. Stability of HACl at different temperatures was monitored over 12 months. Preliminary antimicrobial and antiviral tests demonstrated the potential of HACl for applications in biomedicine.

Analysis of hyaluronan and its derivatives using chromatographic and mass spectrometric techniques.

The aim of this paper is to review chromatographic and mass-spectrometric methods and underline the best analytical approaches for successful analysis of various hyaluronic acid species in different types of samples. Hyaluronan-degrading enzymes and chemical depolymerization produce di- or oligosaccharides suitable for hyaluronan quantification or structural characterization of hyaluronan derivatives. Efficient purification and pre-column derivatization of hyaluronan disaccharides by reductive amination allow subnanogram quantification in biological samples. The chromatographic separation is capable to distinguish all glycosaminoglycans disaccharides and to resolve hyaluronan fragments with 2-40 monomers. Using electrospray ionization or matrix assisted laser desorption ionization, hyaluronan fragments up to 8 kDa or 41 kDa, respectively, can be observed. One- or two-dimensional chromatographic separation with higly sensitive mass-spectrometric detection is an indispensable tool for revealing substituent position, extent of modification and substitution patterns of chemically modified hyaluronan derivatives. It is essential for studying structure-biological function relationships of hyaluronan and its derivatives.

Current analytical methods for the characterization of N-deacetylated hyaluronan: A critical review.

N-Deacetylated hyaluronan (daHA) has been widely investigated as a starting material to develop biomaterials with unique composition and performance. However, its structure elucidation remains a challenging task due to its polysaccharide nature. After the brief mention of its properties and preparation, this review critically evaluates different analytical methods and approaches to characterize this promising polysaccharide. A special attention is paid to the determination of the degree of deacetylation. Besides, the analysis of its molecular weight, primary structure, and deacetylation pattern is also described. The older procedures are compared with the advanced techniques to provide reliable description of daHA.

Insight into the distribution of amino groups along the chain of chemically deacetylated hyaluronan.

Deacetylated hyaluronan (daHA) containing reactive free amino groups is an important intermediate for further modification. Comparing direct and indirect NMR and HPLC to characterize the degree of HA deacetylation (DD), direct NMR approach using area ratio of anomeric CH and CH-NH2 groups was the most precise one. To describe the substitution pattern, daHA was selectively cleaved by nitrous acid generated in situ or hyaluronan lyase from Streptococcus pneumoniae. The resulting oligomers were identified by LC-ESI-MS. The experimental distribution of these oligomers was compared with theoretically expected random oligomer distribution. Independently on the starting HA molecular weight and deacetylation conditions, the experimental data differed from the random distribution model and suggested that deacetylation of certain N-acetyl-d-glucosamine had reduced the probability of deacetylation at the neighbouring disaccharide. This phenomenon was explained by conformational changes of HA caused by intra- and intermolecular interactions between positively charged amino and negatively charged carboxylic groups.

Biodegradable free-standing films from lauroyl derivatives of hyaluronan.

Hyaluronan (HA) films exhibit properties suitable for medical applications, but the solubility of HA limits their use in aqueous environments. This can be overcome by modifying HA with hydrophobic side groups that enable physical cross-linking. In this work, we present water insoluble free-standing films from lauroyl modified HA as novel biomaterials with properties tuneable by the degree of HA substitution. The films are homogeneous, mechanically strong, and flexible and can be sterilized by ethylenoxide. To characterize the films, we measured their thickness, dry mass, content of residual organic solvent, mechanical properties, swelling and enzymatic degradation. The safety and biodegradability of the films were tested both in-vitro and in-vivo, showing that the films are safe and that their degradation can be tailored by the degree of HA substitution.