RESUMEN
We demonstrate a plasmonic Mach-Zehnder (MZ) modulator with a flat frequency response exceeding 170 GHz. The modulator comprises two phase modulators exploiting the Pockels effect of an organic electro-optic material in plasmonic slot waveguides. We further show modulation at 100 GBd NRZ and 60 GBd PAM-4. The electrical drive signals were generated using a 100 GSa/s digital to analog converter (DAC). The high-speed and small-scale devices are relevant for next-generation optical interconnects.
RESUMEN
In this paper, we demonstrate an integrated microwave phoneeded for beamtonics phased array antenna feeder at 60 GHz with a record-low footprint. Our design is based on ultra-compact plasmonic phase modulators (active area <2.5µm2) that not only provide small size but also ultra-fast tuning speed. In our design, the integrated circuit footprint is in fact only limited by the contact pads of the electrodes and by the optical feeding waveguides. Using the high speed of the plasmonic modulators, we demonstrate beam steering with less than 1 ns reconfiguration time, i.e. the beam direction is reconfigured in-between 1 GBd transmitted symbols.
RESUMEN
In this paper, we demonstrate a 70 Gbit/s photonic-based wireless link at 60 GHz using a single RF carrier and a single polarization. This high capacity is achieved by using 32QAM modulation with a symbol rate of 14 GBd. We show a novel pre-equalization technique that enables usage of such very high bandwidths at 60 GHz. Our work indicates that the consumer oriented 60 GHz band could be a viable alternative to more expensive E-band or sub-THz links for high capacity photonic wireless transmission, mobile backhauling and last-mile high-capacity connections.
RESUMEN
Plasmonic modulators might pave the way for a new generation of compact low-power high-speed optoelectronic devices. We introduce an extremely compact transmitter based on plasmonic Mach-Zehnder modulators offering a capacity of 4 × 36 Gbit/s on a footprint that is only limited by the size of the high-speed contact pads. The transmitter array is contacted through a multicore fiber with a channel spacing of 50 µm.
RESUMEN
We report on high-speed plasmonic-organic hybrid Mach-Zehnder modulators comprising ultra-compact phase shifters with lengths as small as 19 µm. Choosing an optimum phase shifter length of 29 µm, we demonstrate 40 Gbit/s on-off keying (OOK) modulation with direct detection and a BER < 6 × 10(-4). Furthermore, we report on a 29 µm long binary-phase shift keying (BPSK) modulator and show that it operates error-free (BER < 1 × 10(-10)) at data rates up to 40 Gbit/s and with an energy consumption of 70 fJ/bit.
RESUMEN
We demonstrate two efficient processing techniques for Nyquist signals, namely computation of signals using dynamic precision as well as arbitrary rational oversampling factors. With these techniques along with massively parallel processing it becomes possible to generate and receive high data rate Nyquist signals with flexible symbol rates and bandwidths, a feature which is highly desirable for novel flexgrid networks. We achieved maximum bit rates of 252 Gbit/s in real-time.
RESUMEN
This paper presents a real-time, coherent optical OFDM transmitter based on a field programmable gate array implementation. The transmitter uses 16QAM mapping and runs at 28 GSa/s achieving a data rate of 85.4 Gb/s on a single polarization. A cyclic prefix of 25% of the symbol duration is added enabling dispersion-tolerant transmission over up to 400 km of SSMF. This is the first transmission experiment performed with a real-time OFDM transmitter running at data rates higher than 40 Gb/s. A key aspect of the paper is the introduction of a novel method for OFDM symbol synchronization without relying on training symbols. Unlike conventional preamble-based synchronization methods which perform cross-correlations at regular time intervals and let the system run freely in between, the proposed method performs synchronization in a continuous manner ensuring correct symbol alignment at all times.
RESUMEN
Photonic integration requires a versatile packaging technology that enables low-loss interconnects between photonic chips in three-dimensional configurations. In this paper we introduce the concept of photonic wire bonding, where polymer waveguides with three-dimensional freeform geometries are used to bridge the gap between nanophotonic circuits located on different chips. In a proof-of-principle experiment, we demonstrate the fabrication of single-mode photonic wire bonds (PWB) by direct-write two-photon lithography. First-generation prototypes allow for efficient broadband coupling with average insertion losses of only 1.6 dB in the C-band and can carry wavelength-division multiplexing signals with multi-Tbit/s data rates. Photonic wire bonding is well suited for automated mass production, and we expect the technology to enable optical multi-chip systems with enhanced performance and flexibility.
RESUMEN
The capability of semiconductor optical amplifiers (SOA) to amplify advanced optical modulation format signals is investigated. The input power dynamic range is studied and especially the impact of the SOA alpha factor is addressed. Our results show that the advantage of a lower alpha-factor SOA decreases for higher-order modulation formats. Experiments at 20 GBd BPSK, QPSK and 16QAM with two SOAs with different alpha factors are performed. Simulations for various modulation formats support the experimental findings.
Asunto(s)
Amplificadores Electrónicos , Láseres de Semiconductores , Telecomunicaciones/instrumentación , Diseño de Equipo , Análisis de Falla de EquipoRESUMEN
We demonstrate for the first time transmission of 54 Gbit/s and 48 Gbit/s over 44 km and 150 km, respectively, utilizing an optical bandwidth of only 3 GHz. We used polarization division multiplexed 512QAM and 256QAM modulation formats in combination with Nyquist pulse shaping having virtually zero roll-off. The resulting spectral efficiencies range up to 18 bit/s/Hz and 16 bit/s/Hz, respectively. Taking into account the overhead required for forward error correction, the occupied signal bandwidth corresponds to net spectral efficiencies of 14.4 bit/s/Hz and 15 bit/s/Hz, which could be achieved in a wavelength division multiplexed network without spectral guard bands.
Asunto(s)
Redes de Comunicación de Computadores/instrumentación , Tecnología de Fibra Óptica/instrumentación , Refractometría/instrumentación , Procesamiento de Señales Asistido por Computador/instrumentación , Telecomunicaciones/instrumentación , Diseño Asistido por Computadora , Diseño de Equipo , Análisis de Falla de Equipo , Microondas , Tamaño de la MuestraRESUMEN
Nyquist sinc-pulse shaping provides spectral efficiencies close to the theoretical limit. In this paper we discuss the analogy to optical orthogonal frequency division multiplexing and compare both techniques with respect to spectral efficiency and peak to average power ratio. We then show that using appropriate algorithms, Nyquist pulse shaped modulation formats can be encoded on a single wavelength at speeds beyond 100 Gbit/s in real-time. Finally we discuss the proper reception of Nyquist pulses.
Asunto(s)
Algoritmos , Modelos Teóricos , Procesamiento de Señales Asistido por Computador , Telecomunicaciones , Simulación por ComputadorRESUMEN
CMOS-compatible optical modulators are key components for future silicon-based photonic transceivers. However, achieving low modulation voltage and high speed operation still remains a challenge. As a possible solution, the silicon-organic hybrid (SOH) platform has been proposed. In the SOH approach the optical signal is guided by a silicon waveguide while the electro-optic effect is provided by an organic cladding with a high χ(2)-nonlinearity. In these modulators the optical nonlinear region needs to be connected to the modulating electrical source. This requires electrodes, which are both optically transparent and electrically highly conductive. To this end we introduce a highly conductive electron accumulation layer which is induced by an external DC "gate" voltage. As opposed to doping, the electron mobility is not impaired by impurity scattering. This way we demonstrate for the first time data encoding with an SOH electro-optic modulator. Using a first-generation device at a data-rate of 42.7 Gbit/s, widely open eye diagrams were recorded. The measured frequency response suggests that significantly larger data rates are feasible.
RESUMEN
Real-time OFDM transmitters breaking the 100 Gbit/s barrier require high-performance, usually FPGA-based digital signal processing. Especially the Fourier transform as a key operation of any OFDM system must be optimized with respect to performance and chip area utilization. Here, we demonstrate an alternative to the widely adopted fast Fourier transform algorithm. Based on an extensive yet optimized use of pre-set look-up tables, our FPGA implementation supports fast reconfigurable channel equalization and switching times in the nanosecond range without re-loading any code. We demonstrate the potential of the concept by realizing the first real-time single polarization OFDM transmitter generating a 101.5 Gbit/s data stream by modulating 58 subcarriers with 16QAM.
Asunto(s)
Análisis de Fourier , Modelos Teóricos , Óptica y Fotónica/instrumentación , Procesamiento de Señales Asistido por Computador/instrumentación , Telecomunicaciones/instrumentación , Algoritmos , Computadores , Diseño de EquipoRESUMEN
A practical scheme to perform the fast Fourier transform in the optical domain is introduced. Optical real-time FFT signal processing is performed at speeds far beyond the limits of electronic digital processing, and with negligible energy consumption. To illustrate the power of the method we demonstrate an optical 400 Gbit/s OFDM receiver. It performs an optical real-time FFT on the consolidated OFDM data stream, thereby demultiplexing the signal into lower bit rate subcarrier tributaries, which can then be processed electronically.
RESUMEN
Experimentally we find a 10 dB input power dynamic range advantage for amplification of phase encoded signals with quantum dot SOA as compared to low-confinement bulk SOA. An analysis of amplitude and phase effects shows that this improvement can be attributed to the lower alpha-factor found in QD SOA.
Asunto(s)
Amplificadores Electrónicos , Puntos Cuánticos , Procesamiento de Señales Asistido por Computador/instrumentación , Telecomunicaciones/instrumentación , Diseño de Equipo , Análisis de Falla de EquipoRESUMEN
We demonstrate a regenerative optical grooming switch for buffer-less interconnection of metro/access and metro/core ring networks with switching functionality in time, space and wavelength domain. Key functionalities of the router are the traffic aggregation with time-slot interchanging (TSI) functionality, the WDM-to-ODTM multiplexing and the OTDM-to-WDM demultiplexing of high-speed channel into lower bit-rate tributaries as well as multi-wavelength all-optical 2R regeneration of several higher-speed signals. BER and Q-factor measurements of different switching scenarios show excellent performance with no error floor and Q-factors above 21 dB.
RESUMEN
We present the first experimental demonstration of an asynchronous digital optical regenerator at 42.67 Gbit/s. The system effectively retimes incoming asynchronous data bursts to a local clock without burst mode clock recovery and converts the signal to a desired wavelength and duty cycle.