In vivo acoustic patterning of endothelial cells for tissue vascularization.

Strategies to fabricate microvascular networks that structurally and functionally mimic native microvessels are needed to address a host of clinical conditions associated with tissue ischemia. The objective of this work was to advance a novel ultrasound technology to fabricate complex, functional microvascular networks directly in vivo. Acoustic patterning utilizes forces within an ultrasound standing wave field (USWF) to organize cells or microparticles volumetrically into defined geometric assemblies. A dual-transducer system was developed to generate USWFs site-specifically in vivo through interference of two ultrasound fields. The system rapidly patterned injected cells or microparticles into parallel sheets within collagen hydrogels in vivo. Acoustic patterning of injected endothelial cells within flanks of immunodeficient mice gave rise to perfused microvessels within 7 days of patterning, whereas non-patterned cells did not survive. Thus, externally-applied ultrasound fields guided injected endothelial cells to self-assemble into perfused microvascular networks in vivo. These studies advance acoustic patterning towards in vivo tissue engineering by providing the first proof-of-concept demonstration that non-invasive, ultrasound-mediated cell patterning can be used to fabricate functional microvascular networks directly in vivo.

Receptor-binding domain of SARS-CoV-2 is a functional αv-integrin agonist.

Among the novel mutations distinguishing SARS-CoV-2 from similar coronaviruses is a K403R substitution in the receptor-binding domain (RBD) of the viral spike (S) protein within its S1 region. This amino acid substitution occurs near the angiotensin-converting enzyme 2-binding interface and gives rise to a canonical RGD adhesion motif that is often found in native extracellular matrix proteins, including fibronectin. Here, the ability of recombinant S1-RBD to bind to cell surface integrins and trigger downstream signaling pathways was assessed and compared with RGD-containing, integrin-binding fragments of fibronectin. We determined that S1-RBD supported adhesion of fibronectin-null mouse embryonic fibroblasts as well as primary human small airway epithelial cells, while RBD-coated microparticles attached to epithelial monolayers in a cation-dependent manner. Cell adhesion to S1-RBD was RGD dependent and inhibited by blocking antibodies against αv and ß3 but not α5 or ß1 integrins. Similarly, we observed direct binding of S1-RBD to recombinant human αvß3 and αvß6 integrins, but not α5ß1 integrins, using surface plasmon resonance. S1-RBD adhesion initiated cell spreading, focal adhesion formation, and actin stress fiber organization to a similar extent as fibronectin. Moreover, S1-RBD stimulated tyrosine phosphorylation of the adhesion mediators FAK, Src, and paxillin; triggered Akt activation; and supported cell proliferation. Thus, the RGD sequence of S1-RBD can function as an αv-selective integrin agonist. This study provides evidence that cell surface αv-containing integrins can respond functionally to spike protein and raises the possibility that S1-mediated dysregulation of extracellular matrix dynamics may contribute to the pathogenesis and/or post-acute sequelae of SARS-CoV-2 infection.

Receptor binding domain of SARS-CoV-2 is a functional αv-integrin agonist.

Among the novel mutations distinguishing SARS-CoV-2 from similar respiratory coronaviruses is a K403R substitution in the receptor-binding domain (RBD) of the viral spike (S) protein within its S1 region. This amino acid substitution occurs near the angiotensin-converting enzyme 2 (ACE2)-binding interface and gives rise to a canonical RGD adhesion motif that is often found in native extracellular matrix proteins, including fibronectin. In the present study, the ability of recombinant S1-RBD to bind to cell surface integrins and trigger downstream signaling pathways was assessed and compared to RGD-containing, integrin-binding fragments of fibronectin. S1-RBD supported adhesion of both fibronectin-null mouse embryonic fibroblasts as well as primary human small airway epithelial cells. Cell adhesion to S1-RBD was cation- and RGD-dependent, and was inhibited by blocking antibodies against α v and ß 3 , but not α 5 or ß 1 , integrins. Similarly, direct binding of S1-RBD to recombinant human α v ß 3 and α v ß 6 integrins, but not α 5 ß 1 integrins, was observed by surface plasmon resonance. Adhesion to S1-RBD initiated cell spreading, focal adhesion formation, and actin stress fiber organization to a similar extent as fibronectin. Moreover, S1-RBD stimulated tyrosine phosphorylation of the adhesion mediators FAK, Src, and paxillin, Akt activation, and supported cell proliferation. Together, these data demonstrate that the RGD sequence within S1-RBD can function as an α v -selective integrin agonist. This study provides evidence that cell surface α v -containing integrins can respond functionally to spike protein and raise the possibility that S1-mediated dysregulation of ECM dynamics may contribute to the pathogenesis and/or post-acute sequelae of SARS-CoV-2 infection.

Time- and Dose-Dependent Effects of Pulsed Ultrasound on Dermal Repair in Diabetic Mice.

Chronic wounds, including diabetic, leg and pressure ulcers, impose a significant health care burden worldwide. Some evidence indicates that ultrasound can enhance soft tissue repair. However, therapeutic responses vary among individuals, thereby limiting clinical translation. Here, effects of pulsed ultrasound on dermal wound healing were assessed using a murine model of chronic, diabetic wounds. An ultrasound exposure system was developed to provide daily ultrasound exposures to full-thickness, excisional wounds in genetically diabetic mice. Wounds were exposed to 1 MHz ultrasound (2 ms pulse, 100 Hz pulse repetition frequency, 0-0.4 MPa) for 2 or 3 wk. Granulation tissue thickness and wound re-epithelialization increased as a function of increasing ultrasound pressure amplitude. At 2 wk after injury, significant increases in granulation tissue thickness and epithelial ingrowth were observed in response to 1 MHz pulsed ultrasound at 0.4 MPa. Wounds exposed to 0.4 MPa ultrasound for 3 wk were characterized by collagen-dense, revascularized granulation tissue with a fully restored, mature epithelium. Of note, only half of wounds exposed to 0.4 MPa ultrasound showed significant granulation tissue deposition after 2 wk of treatment. Thus, the db+/db+ mouse model may help to identify biological variables that influence individual responses to pulsed ultrasound and accelerate clinical translation.

CD4+ T Cell Interstitial Migration Controlled by Fibronectin in the Inflamed Skin.

The extracellular matrix (ECM) is extensively remodeled during inflammation providing essential guidance cues for immune cell migration and signals for cell activation and survival. There is increasing interest in the therapeutic targeting of ECM to mitigate chronic inflammatory diseases and enhance access to the tumor microenvironment. T cells utilize the ECM as a scaffold for interstitial migration, dependent on T cell expression of matrix-binding integrins αVß1/αVß3 and tissue display of the respective RGD-containing ligands. The specific ECM components that control T cell migration are unclear. Fibronectin (FN), a canonical RGD-containing matrix component, is heavily upregulated in inflamed tissues and in vitro can serve as a substrate for leukocyte migration. However, limited by lack of tools to intravitally visualize and manipulate FN, the specific role of FN in effector T cell migration in vivo is unknown. Here, we utilize fluorescently-tagged FN to probe for FN deposition, and intravital multiphoton microscopy to visualize T cell migration relative to FN in the inflamed ear dermis. Th1 cells were found to migrate along FN fibers, with T cells appearing to actively push or pull against flexible FN fibers. To determine the importance of T cell interactions with FN, we used a specific inhibitor of FN polymerization, pUR4. Intradermal delivery of pUR4 (but not the control peptide) to the inflamed skin resulted in a local reduction in FN deposition. We also saw a striking attenuation of Th1 effector T cell movement at the pUR4 injection site, suggesting FN plays a key role in T cell interstitial migration. In mechanistic studies, pUR4 incubation with FN in vitro resulted in enhanced tethering of T cells to FN matrix, limiting productive migration. In vivo, such tethering led to increased Th1 accumulation in the inflamed dermis. Enhanced Th1 accumulation exacerbated inflammation with increased Th1 activation and IFNγ cytokine production. Thus, our studies highlight the importance of ECM FN fibrils for T cell migration in inflamed tissues and suggest that manipulating local levels of ECM FN may prove beneficial in promoting T cell accumulation in tissues and enhancing local immunity to infection or cancer.

Acoustic Fabrication of Collagen-Fibronectin Composite Gels Accelerates Microtissue Formation.

Ultrasound can influence biological systems through several distinct acoustic mechanisms that can be manipulated by varying reaction conditions and acoustic exposure parameters. We recently reported a new ultrasound-based fabrication technology that exploits the ability of ultrasound to generate localized mechanical forces and thermal effects to control collagen fiber microstructure non-invasively. Exposing solutions of type I collagen to ultrasound during the period of microfibril assembly produced changes in collagen fiber structure and alignment, and increased the biological activity of the resultant collagen hydrogels. In the extracellular matrix, interactions between fibronectin and collagen fibrils influence the biological activity of both proteins. Thus, in the present study, we examined how addition of fibronectin to collagen solutions prior to ultrasound exposure affects protein organization and the biological activity of the composite hydrogels. Results indicate that ultrasound can alter the distribution of fibronectin within 3D hydrogels via thermal and non-thermal mechanisms to produce composite hydrogels that support accelerated microtissue formation. The use of acoustic energy to drive changes in protein conformation to functionalize biomaterials has much potential as a unique, non-invasive technology for tissue engineering and regenerative medicine.

Using Acoustic Fields to Fabricate ECM-Based Biomaterials for Regenerative Medicine Applications.

Ultrasound is emerging as a promising tool for both characterizing and fabricating engineered biomaterials. Ultrasound-based technologies offer a diverse toolbox with outstanding capacity for optimization and customization within a variety of therapeutic contexts, including improved extracellular matrix-based materials for regenerative medicine applications. Non-invasive ultrasound fabrication tools include the use of thermal and mechanical effects of acoustic waves to modify the structure and function of extracellular matrix scaffolds both directly, and indirectly via biochemical and cellular mediators. Materials derived from components of native extracellular matrix are an essential component of engineered biomaterials designed to stimulate cell and tissue functions and repair or replace injured tissues. Thus, continued investigations into biological and acoustic mechanisms by which ultrasound can be used to manipulate extracellular matrix components within three-dimensional hydrogels hold much potential to enable the production of improved biomaterials for clinical and research applications.

A Matricryptic Conformation of the Integrin-Binding Domain of Fibronectin Regulates Platelet-Derived Growth Factor-Induced Intracellular Calcium Release.

Platelet-derived growth factor (PDGF) signaling is dysregulated in a wide variety of diseases, making PDGF an attractive therapeutic target. However, PDGF also affects numerous signaling cascades essential for tissue homeostasis, limiting the development of PDGF-based therapies that lack adverse side-effects. Recent studies showed that fibroblast-mediated assembly of extracellular matrix (ECM) fibronectin fibrils attenuates PDGF-induced intracellular calcium release by selectively inhibiting phosphoinositol 3-kinase (PI3K) activation while leaving other PDGF-mediated signaling cascades intact. In the present study, a series of recombinant fibronectin-derived fusion proteins were used to localize the sequences in fibronectin that are responsible for this inhibition. Results demonstrate that attenuation of PDGF-induced intracellular calcium release by the fibronectin matrix mimetic, FNIII1H,8-10 requires α5ß1 integrin ligation, but is not dependent upon the matricryptic, heparin-binding site of FNIII1. Intact cell-binding fibronectin fragments were also unable to attenuate PDGF-induced intracellular calcium release. In contrast, a novel integrin-binding fragment that adopts an extended and aligned conformational state, inhibited both PI3K activation and intracellular calcium release in response to PDGF. Taken together, these studies provide evidence that attenuation of PDGF-induced intracellular calcium release by fibronectin is mediated by a novel conformation of the α5ß1 integrin-binding, FNIII9-10 modules, that is expressed by fibrillar fibronectin.

Non-invasive acoustic fabrication methods to enhance collagen hydrogel bioactivity.

Much attention has focused recently on utilizing components of the extracellular matrix (ECM) as natural building blocks for a variety of tissue engineering applications and regenerative medicine therapies. Consequently, new fabrication methods are being sought to enable molecular control over the structural characteristics of ECM molecules in order to improve their biological function. Exposing soluble collagen to acoustic forces associated with ultrasound propagation produces localized variations in collagen microfiber organization that in turn, promote cell behaviors essential for tissue regeneration, including cell migration and matrix remodeling. In the present study, mechanisms by which ultrasound interacts with polymerizing collagen to produce functional changes in collagen microstructure were investigated. The rate of collagen polymerization was manipulated by adjusting the pH of collagen solutions and the temperature at which gels were polymerized. Results demonstrate that the phase transition of type I collagen from fluid to gel triggered a simultaneous increase in acoustic absorption. This phase transition of collagen involves the lateral growth of early-stage collagen microfibrils and importantly, corresponded to a defined period of time during which exposure to ultrasound introduced both structural and functional changes to the resultant collagen hydrogels. Together, these experiments isolated a critical window in the collagen fiber assembly process during which mechanical forces associated with ultrasound propagation are effective in producing structural changes that underlie the ability of acoustically-modified collagen hydrogels to stimulate cell migration. These results demonstrate that changes in material properties associated with collagen polymerization are a fundamental component of the mechanism by which acoustic forces modify collagen biomaterials to enhance biological function.

Assembly of fibronectin fibrils selectively attenuates platelet-derived growth factor-induced intracellular calcium release in fibroblasts.

Cellular responses to platelet-derived growth factor (PDGF) are altered in a variety of pathological conditions, including cancers, fibroses, and vascular diseases, making PDGF-induced signaling pathways important therapeutic targets. The limited success of therapies designed to impact PDGF pathways may be overcome with a clearer understanding of how cells integrate signals from PDGF and the extracellular matrix (ECM). Here, we assessed the effects of fibronectin matrix assembly on the responsiveness of mesenchymal cells to PDGF. Our results indicate that fibroblast-mediated assembly of fibronectin fibrils attenuates intracellular calcium release in response to PDGF. The dose-dependent inhibition of PDGF-induced intracellular calcium release was specific to the ECM form of fibronectin. Further, a recombinant protein engineered to mimic ECM fibronectin similarly attenuated intracellular calcium release in response to PDGF. Of note, fibronectin attenuated the PDGF-calcium signaling axis at the level of phosphoinositide 3-kinase (PI3K) activation. Interestingly, ECM fibronectin did not alter other intracellular signals activated by PDGF, including activation of PDGF receptor ß, AKT Ser/Thr kinase, phospholipase Cγ1, and extracellular signal-regulated kinase 1/2 (ERK1/2). Rather, fibronectin inhibited activation of the p55 regulatory subunit of PI3K in response to a variety of stimuli, indicating that ECM fibronectin selectively attenuates the intracellular calcium release cascade while leaving intact other PDGF signaling pathways. Selective regulation of calcium signaling by ECM fibronectin via the p55 regulatory subunit of PI3K represents a mechanism by which cells tune their response to PDGF and may therefore serve as a target to selectively regulate one branch of PDGF signaling.

Ultrasound patterning technologies for studying vascular morphogenesis in 3D.

Investigations in this report demonstrate the versatility of ultrasound-based patterning and imaging technologies for studying determinants of vascular morphogenesis in 3D environments. Forces associated with ultrasound standing wave fields (USWFs) were employed to non-invasively and volumetrically pattern endothelial cells within 3D collagen hydrogels. Patterned hydrogels were composed of parallel bands of endothelial cells located at nodal regions of the USWF and spaced at intervals equal to one half wavelength of the incident sound field. Acoustic parameters were adjusted to vary the spatial dimensions of the endothelial bands, and effects on microvessel morphogenesis were analyzed. High-frequency ultrasound imaging techniques were used to image and quantify the spacing, width and density of initial planar cell bands. Analysis of resultant microvessel networks showed that vessel width, orientation, density and branching activity were strongly influenced by the initial 3D organization of planar bands and, hence, could be controlled by acoustic parameters used for patterning. In summary, integration of USWF-patterning and high-frequency ultrasound imaging tools enabled fabrication of vascular constructs with defined microvessel size and orientation, providing insight into how spatial cues in 3D influence vascular morphogenesis.

A Small Chimeric Fibronectin Fragment Accelerates Dermal Wound Repair in Diabetic Mice.

Objective: During wound repair, soluble fibronectin is converted into biologically active, insoluble fibrils via a cell-mediated process. This fibrillar, extracellular matrix (ECM) form of fibronectin stimulates cell processes critical to tissue repair. Nonhealing wounds show reduced levels of ECM fibronectin fibrils. The objective of this study was to produce a small, recombinant wound supplement with the biological activity of insoluble fibronectin fibrils. Approach: A chimeric fibronectin fragment was produced by inserting the integrin-binding Arg-Gly-Asp (RGD) loop from the tenth type III repeat of fibronectin (FNIII10) into the analogous site within the heparin-binding, bioactive fragment of the first type III repeat (FNIII1H). FNIII1HRGD was tested for its ability to support cell functions necessary for wound healing, and then evaluated for its capacity to accelerate healing of full-thickness dermal wounds in diabetic mice. Results:In vitro, FNIII1HRGD supported cell adhesion, proliferation, and ECM fibronectin deposition. Application of FNIII1HRGD to dermal wounds of diabetic mice significantly enhanced wound closure compared with controls (73.9% ±4.1% vs. 58.1% ±4.7% closure on day 9, respectively), and significantly increased granulation tissue thickness (2.88 ± 0.75-fold increase over controls on day 14). Innovation: Recombinant proteins designed to functionally mimic the ECM form of fibronectin provide a novel therapeutic approach to circumvent diminished fibronectin fibril formation by delivering ECM fibronectin signals in a soluble form to chronic wounds. Conclusion: A small, chimeric fibronectin protein was developed. FNIII1HRGD demonstrated enhanced bioactivity in vitro and stimulated wound repair in a murine model of chronic wounds.

Extracellular matrix fibronectin mediates an endothelial cell response to shear stress via the heparin-binding, matricryptic RWRPK sequence of FNIII1H.

Endothelial cells (EC) respond to mechanical forces such as shear stress in a variety of ways, one of which is cytoskeletal realignment in the direction of flow. Our earlier studies implicated the extracellular matrix protein fibronectin in mechanosensory signaling to ECs in intact arterioles, via a signaling pathway dependent on the heparin-binding region of the first type III repeat of fibrillar fibronectin (FNIII1H). Here we test the hypothesis that FNIII1H is required for EC stress fiber realignment under flow. Human umbilical vein ECs (HUVECs) exposed to defined flow conditions were used as a well-characterized model of this stress fiber alignment response. Our results directly implicate FNIII1H in realignment of stress fibers in HUVECs and, importantly, show that the matricryptic heparin-binding RWRPK sequence located in FNIII1 is required for the response. Furthermore, we show that flow-mediated stress fiber realignment in ECs adhered via α5ß1-integrin-specific ligands does not occur in the absence of FHIII1H, whereas, in contrast, αvß3-integrin-mediated stress fiber realignment under flow does not require FNIII1H. Our findings thus indicate that there are two separate mechanosignaling pathways mediating the alignment of stress fibers after exposure of ECs to flow, one dependent on αvß3-integrins and one dependent on FNIII1H. This study strongly supports the conclusion that the RWRPK region of FNIII1H may have broad capability as a mechanosensory signaling site.

Quantitative Ultrasound for Nondestructive Characterization of Engineered Tissues and Biomaterials.

Non-invasive, non-destructive technologies for imaging and quantitatively monitoring the development of artificial tissues are critical for the advancement of tissue engineering. Current standard techniques for evaluating engineered tissues, including histology, biochemical assays and mechanical testing, are destructive approaches. Ultrasound is emerging as a valuable tool for imaging and quantitatively monitoring the properties of engineered tissues and biomaterials longitudinally during fabrication and post-implantation. Ultrasound techniques are rapid, non-invasive, non-destructive and can be easily integrated into sterile environments necessary for tissue engineering. Furthermore, high-frequency quantitative ultrasound techniques can enable volumetric characterization of the structural, biological, and mechanical properties of engineered tissues during fabrication and post-implantation. This review provides an overview of ultrasound imaging, quantitative ultrasound techniques, and elastography, with representative examples of applications of these ultrasound-based techniques to the field of tissue engineering.

Biological Effects of Low-Frequency Shear Strain: Physical Descriptors.

Biological effects of megahertz-frequency diagnostic ultrasound are thoroughly monitored by professional societies throughout the world. A corresponding, thorough, quantitative evaluation of the archival literature on the biological effects of low-frequency vibration is needed. Biological effects, of course, are related directly to what those exposures do physically to the tissue-specifically, to the shear strains that those sources produce in the tissues. Instead of the simple compressional strains produced by diagnostic ultrasound, realistic sources of low-frequency vibration produce both fast (∼1,500 m/s) and slow (1-10 m/s) waves, each of which may have longitudinal and transverse shear components. Part 1 of this series illustrates the resulting strains, starting with those produced by longitudinally and transversely oscillating planes, through monopole and dipole sources of fast waves and, finally, to the case of a sphere moving in translation-the simplest model of the fields produced by realistic sources.

Extracellular matrix fibronectin initiates endothelium-dependent arteriolar dilatation via the heparin-binding, matricryptic RWRPK sequence of the first type III repeat of fibrillar fibronectin.

KEY POINTS: The local arteriolar dilatation produced by contraction of skeletal muscle is dependent upon multiple signalling mechanisms. In addition to the many metabolic signals that mediate this vasodilatation, we show here that the extracellular matrix protein fibronectin also contributes to the response. This vasodilatory signal requires the heparin-binding matricryptic RWRPK sequence in the first type III repeat of fibrillar fibronectin. The fibronectin-dependent component of the integrated muscle contraction-dependent arteriolar vasodilatation is coupled through an endothelial cell-dependent signalling pathway. Recent studies in contracting skeletal muscle have shown that functional vasodilatation in resistance arterioles has an endothelial cell (EC)-dependent component, and, separately have shown that the extracellular matrix protein fibronectin (FN) contributes to functional dilatation in these arterioles. Here we test the hypotheses that (i) the matricryptic heparin-binding region of the first type III repeat of fibrillar FN (FNIII1H) mediates vasodilatation, and (ii) this response is EC dependent. Engineered FN fragments with differing (defined) heparin- and integrin-binding capacities were applied directly to resistance arterioles in cremaster muscles of anaesthetized (pentobarbital sodium, 65 mg kg(-1)) mice. Both FNIII1H,8-10 and FNIII1H induced dilatations (12.2 ± 1.7 µm, n = 12 and 17.2 ± 2.4 µm, n = 14, respectively) whereas mutation of the active sequence (R(613) WRPK) of the heparin binding region significantly diminished the dilatation (3.2 ± 1.8 µm, n = 10). Contraction of skeletal muscle fibres via electrical field stimulation produced a vasodilatation (19.4 ± 1.2 µm, n = 12) that was significantly decreased (to 7.0 ± 2.7 µm, n = 7, P < 0.05) in the presence of FNIII1Peptide 6, which blocks extracellular matrix (ECM) FN and FNIII1H signalling. Furthermore, FNIII1H,8-10 and FNIII1H applied to EC-denuded arterioles failed to produce any dilatation indicating that endothelium was required for the response. Finally, FNIII1H significantly increased EC Ca(2+) (relative fluorescence 0.98 ± 0.02 in controls versus 1.12 ± 0.05, n = 17, P < 0.05). Thus, we conclude that ECM FN-dependent vasodilatation is mediated by the heparin-binding (RWRPK) sequence of FNIII1 in an EC-dependent manner. Importantly, blocking this signalling sequence decreased the dilatation to skeletal muscle contraction, indicating that there is a physiological role for this FN-dependent mechanism.

Cooperative effects of fibronectin matrix assembly and initial cell-substrate adhesion strength in cellular self-assembly.

The cell-dependent polymerization of intercellular fibronectin fibrils can stimulate cells to self-assemble into multicellular structures. The local physical cues that support fibronectin-mediated cellular self-assembly are largely unknown. Here, fibronectin matrix analogs were used as synthetic adhesive substrates to model cell-matrix fibronectin fibrils having different integrin-binding specificity, affinity, and/or density. We utilized this model to quantitatively assess the relationship between adhesive forces derived from cell-substrate interactions and the ability of fibronectin fibril assembly to induce cellular self-assembly. Results indicate that the strength of initial, rather than mature, cell-substrate attachments correlates with the ability of substrates to support fibronectin-mediated cellular self-assembly. The cellular response to soluble fibronectin was bimodal and independent of the integrin-binding specificity of the substrate; increasing soluble fibronectin levels above a critical threshold increased aggregate cohesion on permissive substrates. Once aggregates formed, continuous fibronectin polymerization was necessary to maintain cohesion. During self-assembly, soluble fibronectin decreased cell-substrate adhesion strength and induced aggregate cohesion via a Rho-dependent mechanism, suggesting that the balance of contractile forces derived from fibronectin fibrils within cell-cell versus cell-substrate adhesions controls self-assembly and aggregate cohesion. Thus, initial cell-substrate attachment strength may provide a quantitative basis with which to build predictive models of fibronectin-mediated microtissue fabrication on a variety of substrates. STATEMENT OF SIGNIFICANCE: Cellular self-assembly is a process by which cells and extracellular matrix (ECM) proteins spontaneously organize into three-dimensional (3D) tissues in the absence of external forces. Cellular self-assembly can be initiated in vitro, and represents a potential tool for tissue engineers to organize cells into modular building blocks for artificial tissue fabrication. Fibronectin is an ECM protein that plays a key role in tissue formation during embryonic development. Additionally, the cell-mediated process of converting soluble fibronectin into insoluble, ECM-associated fibrils has been shown to initiate cellular self-assembly in vitro. In this study, we examine the relationship between the strength of cell-substrate adhesions and the ability of fibronectin fibril assembly to induce cellular self-assembly. Our results indicate that substrate composition and density play cooperative roles with cell-mediated fibronectin matrix assembly to control the transition of cells from 2D monolayers into 3D multicellular aggregates. Results of this study provide a quantitative approach to build predictive models of cellular self-assembly, as well as a simple cell-culture platform to produce biomimetic units for modular tissue engineering.

Scholte wave generation during single tracking location shear wave elasticity imaging of engineered tissues.

The physical environment of engineered tissues can influence cellular functions that are important for tissue regeneration. Thus, there is a critical need for noninvasive technologies capable of monitoring mechanical properties of engineered tissues during fabrication and development. This work investigates the feasibility of using single tracking location shear wave elasticity imaging (STL-SWEI) for quantifying the shear moduli of tissue-mimicking phantoms and engineered tissues in tissue engineering environments. Scholte surface waves were observed when STL-SWEI was performed through a fluid standoff, and confounded shear moduli estimates leading to an underestimation of moduli in regions near the fluid-tissue interface.

Therapeutic Applications of Extracellular Matrix.

Chronic and hard-to-heal wounds are a tremendous burden on our healthcare system and impair the quality of life for millions of people. An emerging focus of regenerative medicine is the development of natural biomaterials that can stimulate tissue formation or repair by recreating the functional and structural properties of proteins and polysaccharides found within the extracellular matrix (ECM). Promising new developments include the fabrication of novel ECM-based biologics to selectively deliver drugs or growth factors to wounds; new classes of bioactive tissue sealants, scaffolds, and hydrogels; as well as inductive wound dressings derived from decellularized tissues. The advances highlighted in this forum issue provide an exciting glimpse into the growing potential of ECM-based wound therapeutics.

Ultrasound technologies for biomaterials fabrication and imaging.

Ultrasound is emerging as a powerful tool for developing biomaterials for regenerative medicine. Ultrasound technologies are finding wide-ranging, innovative applications for controlling the fabrication of bioengineered scaffolds, as well as for imaging and quantitatively monitoring the properties of engineered constructs both during fabrication processes and post-implantation. This review provides an overview of the biomedical applications of ultrasound for imaging and therapy, a tutorial of the physical mechanisms through which ultrasound can interact with biomaterials, and examples of how ultrasound technologies are being developed and applied for biomaterials fabrication processes, non-invasive imaging, and quantitative characterization of bioengineered scaffolds in vitro and in vivo.