RESUMEN
We report, a shape controlled novel synthesis of Indium oxide (In2O3) nanocapsule using biogenic reflux method. The In2O3 samples were obtained through optimization of the concentration of sodium citrate, which played a significant role to tune the size of nanocapsules. All synthesized In2O3 samples were characterized by using X-ray diffraction (XRD), infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and selected area electron diffraction (SAED). The morphological study reflects the effect of sodium citrate on the size of nanocapsules and confirms the formation of nanocapsules in the range of 50â¯nm. Furthermore, the photocatalytic activity of In2O3 nanocapsules based photocatalyst was carried out for the degradation of Crystal Violet (CV) dye under natural sunlight illumination. The experiment revealed that the In2O3 nanocapsule efficiently degrades 90% of CV within 180â¯min. This effort recommends the synthesis of In2O3 nanocapsule based photocatalyst for rapid degradation of CV under natural sunlight illumination.
RESUMEN
Herein, we report honeycomb nanostructured single crystalline hexagonal WO(3) (h-WO(3)) thin films in order to improve electrochromic performance. In the present investigation, honeycomb nanostructured WO(3) with different unit size and nanowire array with highly nanocrystalline frameworks have been synthesized via a hydrothermal technique. The influence of hydrothermal reaction time on the honeycomb unit cells, crystallite size, lithium ion diffusion coefficient and switching time for coloration/bleaching were studied systematically. The electrochromic study reveals that the honeycomb unit cell size has a significant impact on the electrochromic performance. Small unit cells in the honeycomb lead to large optical modulation and fast switching response. A large optical modulation in the visible spectral region (60.74% at λ = 630 nm) at a potential of -1.2 V with fast switching time (4.29 s for coloration and 3.38 s for bleaching) and high coloration efficiency (87.23 cm(2) C(-1)) is observed in the honeycomb WO(3) thin films with a unit cell diameter of 1.7 µm. The variation in color on reduction of WO(3) with applied potential has been plotted on an xy-chromaticity diagram and the color space coordinate shows the transition from a colorless to deep blue state.
RESUMEN
As many new cosmetic products are introduced into the market, attention must be given to contact dermatitis, which is commonly caused by cosmetics. We investigate the prevalence of preservative allergy in 584 patients with suspected cosmetic contact dermatitis at 11 different hospitals. From January 2010 to March 2011, 584 patients at 11 hospital dermatology departments presented with cosmetic contact dermatitis symptoms. These patients were patch-tested for preservative allergens. An irritancy patch test performed on 30 control subjects using allergens of various concentrations showed high irritancy rates. Preservative hypersensitivity was detected in 41.1% of patients. Allergens with the highest positive test rates were benzalkonium chloride (12.1%), thimerosal (9.9%) and methylchloroisothiazolinone/methylisothiazolinone (MCI/MI) (5.5%). Benzalkonium chloride and chlorphenesin had the highest irritancy rate based on an irritancy patch test performed using various concentrations. Seven of 30 normal subjects had a positive irritant patch reading with 0.1% benzalkonium chloride and eight of 30 normal subjects had a positive irritant patch reading at 4 days with 0.5% chlorphenesin in petrolatum. Although benzalkonium chloride was highly positive for skin reactions in our study, most reactions were probably irritation. MCI/MI and thimerosal showed highly positive allergy reactions in our study. The optimum concentration of chlorphenesin to avoid skin reactions is less than 0.5%.
