RESUMEN
Air-transmissible pathogenic viruses, such as influenza viruses and coronaviruses, are some of the most fatal strains and spread rapidly by air, necessitating quick and stable measurements from sample air volumes to prevent further spread of diseases and to take appropriate steps rapidly. Measurements of airborne viruses generally require their collection into liquids or onto solid surfaces, with subsequent hydrosolization and then analysis using the growth method, nucleic-acid-based techniques, or immunoassays. Measurements can also be performed in real time without sampling, where species-specific determination is generally disabled. In this review, we introduce some recent advancements in the measurement of pathogenic airborne viruses. Air sampling and measurement technologies for viral aerosols are reviewed, with special focus on the effects of air sampling on damage to the sampled viruses and their measurements. Measurement of pathogenic airborne viruses is an interdisciplinary research area that requires understanding of both aerosol technology and biotechnology to effectively address the issues. Hence, this review is expected to provide some useful guidelines regarding appropriate air sampling and virus detection methods for particular applications.
Asunto(s)
Microbiología del Aire , Virus , Aerosoles , Manejo de EspecímenesRESUMEN
Electrostatic samplers have been increasingly studied for sampling of viral and bacterial aerosols, and bioaerosol samplers are required to provide concentrated liquid samples with high physical collection and biological recovery, which would be critical for rapid detection. Here, the effects of sampling media and protocols on the physical collection and biological recovery of two airborne bacteria (Pseudomonas fluorescens and Micrococcus luteus) under electrostatic field were investigated using a personal electrostatic particle concentrator (EPC). Deionized (DI) water with/without sodium dodecyl sulfate (SDS) and phosphate buffered saline were tested as sampling media. A polystyrene container was mounted onto the collection electrode of the EPC for stable storage and vortexing after capture. Many bacterial cells were found to be deposited on the bottom surface of the container submerged in the media via electrophoresis, and among the tested sampling protocols, wet sampling with a container and subsequent vortexing offered the most bacteria in the collection suspension. Experiments with several sampling media showed that 0.001-0.01% SDS-DI water demonstrated the highest recovery rate in the EPC. These findings would be valuable in the field of sampling and subsequent rapid detection of bioaerosols.
RESUMEN
Despite extensive efforts toward developing antibiofilm materials, efficient prevention of biofilm formation remains challenging. Approaches based on a single strategy using either bactericidal material, antifouling coatings, or nanopatterning have shown limited performance in the prevention of biofilm formation. This study presents a hybrid strategy based on a lipid-hydrogel-nanotopography hybrid for the development of a highly efficient and durable biofilm-resistant material. The hybrid material consists of nanostructured antifouling, biocompatible polyethylene glycol-based polymer grafted with an antifouling zwitterionic polymer of 2-methacryloyloxyethyl phosphorylcholine. Based on the unique composite nanostructures, the lipid-hydrogel-nanostructure hybrid exhibits superior dual functionalities of antifouling and bactericidal activities against Gram-negative and Gram-positive bacteria, compared with those of surfaces with simple nanostructures or antifouling coatings. Additionally, it preserves the robust antibiofilm activity even when the material is damaged under external mechanical stimuli thanks to the polymeric composite nanostructure.
RESUMEN
The determination of fluid density and viscosity using most cantilever-based sensors is based on changes in resonant frequency and peak width. Here, we present a wave propagation analysis using piezoelectrically excited micro-cantilevers under distributed fluid loading. The standing wave shapes of microscale-thickness cantilevers partially immersed in liquids (water, 25% glycerol, and acetone), and nanoscale-thickness microfabricated cantilevers fully immersed in gases (air at three different pressures, carbon dioxide, and nitrogen) were investigated to identify the effects of fluid-structure interactions to thus determine the fluid properties. This measurement method was validated by comparing with the known fluid properties, which agreed well with the measurements. The relative differences for the liquids were less than 4.8% for the densities and 3.1% for the viscosities, and those for the gases were less than 6.7% for the densities and 7.3% for the viscosities, showing better agreements in liquids than in gases.
RESUMEN
Reduced graphene oxide (RGO) has recently gained considerable attention for use in electrochemical biosensing applications due to its outstanding conducting properties and large surface area. This report presents a novel microfluidic chip integrated with an RGO-based electrochemical immunosensor for label-free detection of an influenza virus, H1N1. Three microelectrodes were fabricated on a glass substrate using the photolithographic technique, and the working electrode was functionalized using RGO and monoclonal antibodies specific to the virus. These chips were integrated with polydimethylsiloxane microchannels. Structural and morphological characterizations were performed using X-ray photoelectron spectroscopy and scanning electron microscopy. Electrochemical studies revealed good selectivity and an enhanced detection limit of 0.5 PFU mL-1, where the chronoamperometric current increased linearly with H1N1 virus concentration within the range of 1 to 104 PFU mL-1 (R2 = 0.99). This microfluidic immunosensor can provide a promising platform for effective detection of biomolecules using minute samples.
Asunto(s)
Técnicas Biosensibles/métodos , Técnicas Electroquímicas/métodos , Grafito/química , Subtipo H1N1 del Virus de la Influenza A/aislamiento & purificación , Microfluídica/métodos , Técnicas Biosensibles/instrumentación , Técnicas Electroquímicas/instrumentación , Inmunoensayo/instrumentación , Inmunoensayo/métodos , Subtipo H1N1 del Virus de la Influenza A/inmunología , Límite de Detección , Microelectrodos , Microfluídica/instrumentaciónRESUMEN
Biofilms can cause serious concerns in many applications. Not only can they cause economic losses, but they can also present a public health hazard. Therefore, it is highly desirable to remove biofilms from surfaces. Many studies on CO2 aerosol cleaning have employed nitrogen purges to increase biofilm removal efficiency by reducing the moisture condensation generated during the cleaning. However, in this study, periodic jets of CO2 aerosols without nitrogen purges were used to remove Pseudomonas putida biofilms from polished stainless steel surfaces. CO2 aerosols are mixtures of solid and gaseous CO2 and are generated when high-pressure CO2 gas is adiabatically expanded through a nozzle. These high-speed aerosols were applied to a biofilm that had been grown for 24 hr. The removal efficiency ranged from 90.36% to 98.29% and was evaluated by measuring the fluorescence intensity of the biofilm as the treatment time was varied from 16 sec to 88 sec. We also performed experiments to compare the removal efficiencies with and without nitrogen purges; the measured biofilm removal efficiencies were not significantly different from each other (t-test, p > 0.55). Therefore, this technique can be used to clean various bio-contaminated surfaces within one minute.
Asunto(s)
Aerosoles , Biopelículas , Dióxido de Carbono , Descontaminación/métodos , Nitrógeno , Acero InoxidableRESUMEN
Measurements of airborne viruses via sampling have been critical issues. Most electrostatic samplers have been assessed for bacterial aerosols or micrometer-sized viral particles; however, sampling of submicrometer-sized airborne viruses is necessary, especially because of the high probability of their staying airborne and their deposition in the lower respiratory tract. Here, we present a novel personal electrostatic particle concentrator (EPC) for gentle sampling of submicrometer airborne virus particles. Owing to the enhanced electric field designed in this EPC, the collection efficiencies reached values as high as 99.3-99.8% for 0.05-2 µm diameter polystyrene particles at a flow rate of 1.2 L/min. Submicrometer-sized MS2 and T3 virus particles were also collected in the EPC, and the concentrations relative to their respective initial suspensions were more than 10 times higher than those in the SKC BioSampler. Moreover, the recovery rate of T3 was 982 times higher in the EPC (-2 kV) than in the BioSampler at 12.5 L/min because of the gentle sampling of the EPC. Gentle sampling is desirable because many bioaerosols suffer from significant viability losses during sampling. The influence of ozone generated, applied electrostatic field, and the flow rate on the viability of the viruses will also be discussed.
Asunto(s)
Microbiología del Aire , Virión , Aerosoles , Monitoreo del Ambiente , Tamaño de la Partícula , Manejo de Especímenes , Electricidad EstáticaRESUMEN
A periodic jet of carbon dioxide (CO2) aerosols is a very quick and effective mechanical technique to remove biofilms from various substrate surfaces. However, the impact of the aerosols on the viability of bacteria during treatment has never been evaluated. In this study, the effects of high-speed CO2 aerosols, a mixture of solid and gaseous CO2, on bacteria viability was studied. It was found that when CO2 aerosols were used to disperse biofilms of Escherichia coli, they led to a significant loss of viability, with approximately 50% of the dispersed bacteria killed in the process. By comparison, 75.6% of the biofilm-associated bacteria were viable when gently dispersed using Proteinase K and DNase I. Indirect proof that the aerosols are damaging the bacteria was found using a recombinant E. coli expressing the cyan fluorescent protein, as nearly half of the fluorescence was found in the supernatant after CO2 aerosol treatment, while the rest was associated with the bacterial pellet. In comparison, the supernatant fluorescence was only 9% when the enzymes were used to disperse the biofilm. As such, these CO2 aerosols not only remove biofilm-associated bacteria effectively but also significantly impact their viability by disrupting membrane integrity.
Asunto(s)
Biopelículas , Dióxido de Carbono , Escherichia coli/fisiología , Viabilidad Microbiana , Aerosoles , Dióxido de Carbono/administración & dosificación , Escherichia coli/efectos de los fármacos , Escherichia coli/ultraestructura , Viabilidad Microbiana/efectos de los fármacosRESUMEN
Osteopontin (OPN) is involved in almost all steps of cancer development, and it is being investigated as a potential biomarker for a diagnosis and prognosis of prostate cancer. Here, we report a label-free, highly sensitive and transparent immunosensor based on single-walled carbon nanotubes (SWCNTs) for detection of OPN. A high density of COOH functionalized SWCNTs was deposited between two gold/indium tin oxide electrodes on a glass substrate by dielectrophoresis. Monoclonal antibodies specific to OPN were covalently immobilized on the SWCNTs. Relative resistance change of the immunosensors was measured as the concentration of OPN in phosphate buffer saline (PBS) and human serum was varied from 1 pg mL(-1) to 1 µg mL(-1) for different channel lengths of 2, 5, and 10 µm, showing a highly linear and reproducible behavior (R(2)>97%). These immunosensors were also specific to OPN against another test protein, bovine serum albumin, PBS and human serum, showing that a limit of detection for OPN was 0.3 pg mL(-1). This highly sensitive and transparent immunosensor has a great potential as a simple point-of-care test kit for various protein biomarkers.
Asunto(s)
Biomarcadores de Tumor/análisis , Técnicas Biosensibles/métodos , Inmunoensayo/métodos , Nanotubos de Carbono/química , Osteopontina/análisis , Neoplasias de la Próstata , Biomarcadores de Tumor/sangre , Electricidad , Electrodos , Oro/química , Humanos , Límite de Detección , Masculino , Modelos Moleculares , Conformación Molecular , Neoplasias de la Próstata/sangre , Compuestos de Estaño/químicaRESUMEN
Reusability of a biosensor has recently received considerable attention, and it is closely related with the effective desorption of probe molecules. We present a novel mechanical desorption technique to reuse biosensors by using periodic jets of carbon dioxide (CO2) aerosols (a mixture of solid and gaseous CO2), and demonstrate its feasibility by removing physically adsorbed and covalently bonded fluorescent proteins i.e., Escherichia coli fluorescein isothiocyanate antibody and bovine serum albumin (E. coli FITC-Ab and FITC-BSA) from silicon chips. The proteins on the chip surfaces were measured by fluorescent images before and after applying the aerosols. The removal efficiency of the aerosol treatment was measured for various concentrations (1-20 µg mL(-1)) of E. coli FITC-Ab and FITC-BSA with two different removal cycles (5 and 11 cycles; each cycle: 8s). We observed high removal efficiencies (>93.5% for physically adsorbed Ab and >84.6% for covalently bonded Ab) at 11 cycle aerosol treatment. This CO2 aerosol treatment did not undermine re-functionalization, which was confirmed by the fluorescent images of FITC-Abs for fresh and reused chips. Desorption of the immobilized layers was validated by Fourier transform infrared and X-ray photoelectron spectroscopic analyses. We also conducted an experiment on the regeneration of E. coli sensing chips using this aerosol treatment, and the chips were re-used 5 times successfully. This mechanical desorption technique is a highly effective and novel strategy for reusable biosensors.
Asunto(s)
Aerosoles/química , Técnicas Biosensibles , Dióxido de Carbono/química , Proteínas Inmovilizadas/metabolismo , Animales , Anticuerpos Inmovilizados/química , Anticuerpos Inmovilizados/metabolismo , Bovinos , Escherichia coli/metabolismo , Fluoresceína-5-Isotiocianato/análogos & derivados , Fluoresceína-5-Isotiocianato/química , Fluoresceína-5-Isotiocianato/metabolismo , Proteínas Inmovilizadas/química , Espectroscopía de Fotoelectrones , Albúmina Sérica Bovina/química , Albúmina Sérica Bovina/metabolismo , Silicio/química , Espectroscopía Infrarroja por Transformada de FourierRESUMEN
The influenza virus has received extensive attention due to the recent H1N1 pandemics originating from swine. This study reports a label-free, highly sensitive, and selective electrical immunosensor for the detection of influenza virus H1N1 based on dielectrophoretically deposited single-walled carbon nanotubes (SWCNTs). COOH-functionalized SWCNTs were deposited on a self-assembled monolayer of polyelectrolyte polydiallyldimethyl-ammonium chloride (PDDA) between two gold electrodes by dielectrophoretic and electrostatic forces, which resulted in reproducible, uniform, aligned, and aggregation-free SWCNT channels (2-10 µm in length). Avidin was immobilized onto the PDDA-SWCNT channels, and viral antibodies were immobilized using biotin-avidin coupling. The resistance of the channels increased with the binding of the influenza viruses to the antibodies. These immunosensors showed linear behavior as the virus concentration was varied from 1 to 10(4) PFU ml(-1) along with a detection time of 30 min. The immunosensors with a 2 µm channel length detected 1 PFU ml(-1) of the influenza virus accurately (R(2) = 0.99) and selectively from MS2 bacteriophages. These immunosensors have the potential to become an important component of a point-of-care test kit that will enable a rapid clinical diagnosis.
Asunto(s)
Anticuerpos Antivirales/análisis , Técnicas Biosensibles , Electroforesis/métodos , Subtipo H1N1 del Virus de la Influenza A/aislamiento & purificación , Nanotubos de Carbono , Subtipo H1N1 del Virus de la Influenza A/inmunología , Subtipo H1N1 del Virus de la Influenza A/fisiología , Fusión de Membrana , Microelectrodos , Microscopía de Fuerza Atómica , Microscopía Electrónica de Rastreo , Electricidad EstáticaRESUMEN
This study evaluated predation with Bdellovibrio bacteriovorous and CO(2) aerosol spraying to remove fluorescent Escherichia coli biofilms from silicon chips. Initial tests found that 7.5×10(5) viable E. coli cells were dispersed into the surrounding environment during aerosol treatment. The total number dispersed per test decreased to only 16 for predated biofilms. This is nearly 50,000-fold lower compared to untreated chips and 1000-fold lower compared to chips soaked in HEPES buffer only. Both scanning electron microscopy (SEM) and fluorescent microscopy analyses confirmed that predation alone did not completely eradicate the biofilm population. When used in conjunction with CO(2) aerosols, however, no fluorescent signals remained and the SEM pictures showed a pristine surface devoid of bacteria. Consequently, this study demonstrates these two methods can be used with each other to significantly remove biofilms from surfaces while also significantly reducing the likelihood of human exposure to potential pathogens during their removal.
Asunto(s)
Bdellovibrio/metabolismo , Biopelículas/efectos de los fármacos , Agentes de Control Biológico , Dióxido de Carbono/farmacología , Aerosoles/administración & dosificación , Antibacterianos/administración & dosificación , Antibacterianos/farmacología , Carga Bacteriana , Bdellovibrio/fisiología , Dióxido de Carbono/administración & dosificación , Escherichia coli/efectos de los fármacos , Escherichia coli/metabolismo , Viabilidad Microbiana/efectos de los fármacos , Microscopía Electrónica de Rastreo , Microscopía Fluorescente , Silicio/metabolismoRESUMEN
The present study evaluated the removal of Escherichia coli XL1-blue biofilms using periodic jets of carbon dioxide aerosols (a mixture of solid and gaseous CO(2)) with nitrogen gas. The aerosols were generated by the adiabatic expansion of high-pressure CO(2) gas through a nozzle and used to remove air-dried biofilms. The areas of the biofilms were measured from scanning electron micrographs before and after applying the aerosols. The removal efficiency of the aerosol treatment was measured with various air-drying times of the biofilms before the treatment, surface materials, and durations of CO(2) aerosols in each 8-s aerosol-nitrogen cleaning cycle. Nearly 100% of the fresh biofilms were removed from the various surfaces very reliably within 90 s. This technique can be useful for removing unsaturated biofilms on solid surfaces and has potential applications for cleaning bio-contaminated surfaces.