RESUMEN
Supercapacitors are promising energy storage devices with high charging/discharging speeds and power densities. To improve their poor stability, we fabricated electrodes by integrating perovskite materials (La0.8Sr0.2Mn0.5Co0.5O3-δ, LSMCO) possessing redox reaction ability with graphene nanoplatelets exhibiting good electronic properties. One of the resultant composites (L25G70) demonstrated high capacitance and excellent capacitance retention (95% after 5000 cycles). These results are superior to other electrodes (L50G45 and L75G20) containing a larger ratio of LSMCO, even L75G20 did not exhibit supercapacitor behavior after 3000 cycles. GN can induce structural distortion in LSMCO, thereby the high amount of adsorbed oxygen per lattice oxygen can explain the best electrochemical performance of L25G70, while structural collapse rationalized the failure of L75G20. The findings of this study demonstrated that the use of LSMCO can improve the cycling stability of supercapacitors.
RESUMEN
A new simple drying process was developed in order to prepare a metallic nanocatalysts/Nafion for self-humidifying membrane in a proton-exchange membrane fuel cell (PEMFC). Metallic precursors such as platinum(ll) bis(acetylacetonate) or palladium(ll) bis(acetylacetonate) was sublimed and simultaneously penetrated into the surface of a Nafion film. And then it was reduced to Pt or Pd nanoparticles beneath the film surface without a special reducing agent in a glass reactor of N2 atmosphere at 180 degrees C for 5, 10, 30 and 60 min, respectively. The morphology and distribution of the Pt or Pd nanoparticles were observed by transmission electron microscopy (TEM) and elemental analysis was carried out by an energy dispersive spectroscopy (EDS), and we found that the penetration depth of the metallic nanoparticles and the particle sizes increased with increasing exposure time to the metallic precursors, and the particle size at the surface area was larger than that at the deeper area.
RESUMEN
A simple method for the synthesis of Pt-Pd nanocatalysts was developed for a proton-exchange membrane fuel cell (PEMFC), which was loaded on a nafion coated carbon black via the sequential reduction of palladium(II) bis(acetylacetonato) and platinum(II) bis(acetylacetonato) in a drying process. Metallic precursors were sublimed and reduced on a nafion coated carbon black which was spray coated on a gas diffusion layer (GDL) in a glass reactor of N2 atmosphere at 180 degrees C for various times. The morphology and distribution of the Pt and Pd nanoparticles were observed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM), and we found that the loading weight, number density and particle size of Pt-Pd nanoparticles increased with increasing exposure time at 180 degrees C.
